Why doesn't com.apple.IE.client.exeshut down when Mobile Me finishes sync?

Since upgrading to iTunes 9.1.0.74 a couple of days ago, the com.apple.IE.client.exe process, which starts during the Calendars phase of a Mobile Me manual sync process, fails to shut down when the sync process is complete. The Calendars phase now runs 5-10 minutes even when there are no Calendar changes. While it runs, com.apple.IE.client.exe runs at 50% of the CPU, and memory usage climbs continuously. It reaches about 2 GB (2,000,000 K in Windows Task Manager!) by the time the sync process completes.
However, com.apple.IE.client.exe _doesn't end_ even though the sync is complete. Instead, it keeps running at 50% CPU. Somewhere around 2.1 to 2.2 GB of memory usage it reports: "com.apple.IE.client.exe - Application Error. The exception Breakpoint. A breakpoint has been reached. (0x80000003) occurred in the application at location 0x0c90120E."
This has occurred at the end of four Mobile Me syncs now. Upon selecting OK to end the application, everything else seems fine.
I see other posts regarding the com.apple.IE.client.exe process in the latest iTunes update, but no clear resolution. I tried Apple Mobile Me chat, and replicated the problem twice while on-line, but their only recommendation (after verifying that my only Outlook COM add-on is the iTunes add-on) was to reinstall iTunes and Mobile Me, and if that didn't work, to create another user and see if the sync problem occurred there. Since that user would have no Outlook data to sync, this suggestion wasn't very helpful.

As am experiment, I just ran a Mobile Me manual sync, but first I de-selected Bookmarks, and synced just Contacts and Calendars. com.apple.IE.client.exe did NOT start at the beginning of the Calendars sync phase (as it had in the four previous syncs since upgrading to iTunes 9.1.0.79). In fact, it did not start at all, the Calendars sync phase finished quickly and the entire sync process finished in less than a minute.
The apparent conclusion is that com.apple.IE.client.exe is used to sync IE bookmarks with Mobile Me, it starts (for some unknown reason) at the beginning of the Calendars sync phase if Bookmarks are being synced (not at the beginning of the Bookmarks sync phase), it delays the Calendars sync phase significantly (but not the Bookmarks sync phase), and it has some sort of serious memory leak problem that balloons its memory usage past 2 GB.

Similar Messages

Com.apple.DotMacSync.client.exe consumes most of CPU

Periodically com.apple.DotMacSync.client.exe runs when I have iTunes running. While it runs it consumes most of the CPU in the computer. This is hard on any other program that is running. How can I reduce this effect ?

Hi Turingtest2!
You seem to be the go-to guy with these types of errors. I'm quite impressed by your thoroughness! My error began showing up a few weeks ago when I updated iTunes to 11.1.5.5. The error doesn't seem to get in the way of iTunes working, or my syncing Windows XP / iPhone, but this error message pops up every 10 minutes or so with a loud "don't do that!" noise, which is mildly irritating and I'd love for it to go away.
Error: com.apple.DotMacSync.client.exe Entry Point Not Found. X The procedure entry point objc_exception_try_enter could not be located in the dynamic link library obj.dll
This seems to be a bit different from other users, but perhaps the same response - to uninstall your list of programs and reinstall iTunes is the best strategy?
Thanks Turingtest2 - like your photo by the way.
Renee (somewhat lost in rural Minnesota...)

Multiple instances com.apple.outlook.client.exe *32 during Outlook sync

First, specs:
Windows 7 64bit
Norton 360
Outlook 2010 Beta
iPhone 3GS (iOS 4)
iTunes 9.2.0.61
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
NVIDIA 132-CK-NF78
iTunes 9.2.0.61
QuickTime 7.6.6
FairPlay 1.8.20
Apple Application Support 1.3
iPod Updater Library 9.2d4
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.1.0.62
Apple Mobile Device Driver 1.49.0.0
Bonjour 2.0.2.0 (214.3)
iTunes Serial Number BC49453253087E71
Current user is not an administrator.
The current local date and time is 2010-06-22 16:22:25.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GTX 260
** External Plug-ins Information **
No external plug-ins installed.
Genius ID: 23fbe8aec176fa95f0b481c13800b05c
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {9FC31319-2E36-4431-9FB0-EBBA27A93A9D}
Description: NVIDIA nForce Networking Controller #2
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name: {234CF460-8AE3-42AF-8CE1-A7369FDDADFD}
Description: NVIDIA nForce Networking Controller
IP Address: 192.168.1.101
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
DHCP Enabled: Yes
DHCP Server: 192.168.1.254
Lease Obtained: Tue Jun 22 15:56:44 2010
Lease Expires: Wed Jun 23 15:56:44 2010
DNS Servers: 192.168.1.254
192.168.1.254
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-06-21 19:07:42.
** CD/DVD Drive Tests **
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
E: ASUS DRW-2014L1T, Rev 1.02
Drive is empty.
** Device Connectivity Tests **
iPodService 9.2.0.61 is currently running.
iTunesHelper 9.2.0.61 is currently running.
Apple Mobile Device service 3.1.0.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Texas Instruments 1394 OHCI Compliant Host Controller. Device is working properly.
Connected Device Information:
iSquelch, iPhone 3GS running firmware version 4.0
Serial Number: 87945GJR3NR
** Device Sync Tests **
Sync tests completed successfully.
Whenever I sync, multiple instances of (and by multiple, I mean literally dozens) of copies of "com.apple.outlook.client.exe *32" begin opening. They continue opening until iTunes basically grinds to a halt. This happens with MobileMe, too, and means I can't sync up with Outlook.

Checked: I'm using a 32-bit version of Outlook and not a 64-bit. Did not sync via a second user's installation, either.
Still searching for resolution.
Note: All other syncing still works, iTunes only crashes under the weight of 90 or so com.apple.Outlook.client.exe instances when any (any) Outlook-related option is checked, including Outlook-related options in MobileMe. The processes can be killed all at once by right clicking "SyncServer.exe" in the task manager and clicking "End Process Tree."

Com.apple.DotMacSync.client.exe error message

Error message "com.apple.DotMacSync.client.exe" keeps being displayed. Message content reads "The procedure obj_exception_try_enter could not be located in the dynamic link library". I have installed the latest iTunes

Hi Turingtest2!
You seem to be the go-to guy with these types of errors. I'm quite impressed by your thoroughness! My error began showing up a few weeks ago when I updated iTunes to 11.1.5.5. The error doesn't seem to get in the way of iTunes working, or my syncing Windows XP / iPhone, but this error message pops up every 10 minutes or so with a loud "don't do that!" noise, which is mildly irritating and I'd love for it to go away.
Error: com.apple.DotMacSync.client.exe Entry Point Not Found. X The procedure entry point objc_exception_try_enter could not be located in the dynamic link library obj.dll
This seems to be a bit different from other users, but perhaps the same response - to uninstall your list of programs and reinstall iTunes is the best strategy?
Thanks Turingtest2 - like your photo by the way.
Renee (somewhat lost in rural Minnesota...)

HT4437 I have successffully used my iPad with the Apple TV with no problem but just recently, the Airplay icon doesn't come up on the iPad anymore when I'm trying to connect. What can I do to fix this?

I have successffully used my iPad with the Apple TV with no problem but just recently, the Airplay icon doesn't come up on the iPad anymore when I'm trying to connect. What can I do to fix this?

Try restarting your router as a first thing, this sometimes works for me.

Crash of com.apple.Outlook.client.exe

Hello
we have a new Toshiba with windows 7 and outlook 2003.
Tried to sync with an iPhone 3GS
It tells in iTunes it synced succesfully; but in the background the "com.apple.Outlook.client.exe" crashes.
Outlook then tells me it cannot access the calendar/contacts because it cannot access the folders because a process accessing the folder crashed.
Quit outlook and reopen it again brings it back.
errors are (translated from German):
Name of faulty application : com.apple.Outlook.client.exe, Version: 17.89.0.10, timestamp: 0x4cb91bf4
Name of faulty moduls: mspst32.dll, Version: 11.0.8317.0, timestamp: 0x4ae0c06f
exception: 0xc0000005
Error-offset: 0x0001e58b
ID of faulty Process: 0x1984
starttime of faulty application: 0x01cbbbd0218270f5
path of faulty application: C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\com.apple.Outlook.client.exe
path of faulty module: C:\Program Files (x86)\Common Files\SYSTEM\MSMAPI\1031\mspst32.dll
what can be done except:
- installed all updates (win and office)
- installed itunes a new
- rename mspst32.dll to mspst32-old.dll (got a new one with the same data)
greets,
Jack

I have a similar problem. I don't sync with outlook though, (I just sync with exchange server wirelessly). However, when iTunes starts, com.apple.outlook.client.exe uses alot of resources and I can't open any MS Office documents.
I close iTunes, process still runs, documents don't open. I highlight it and "end process" and all the documents I was trying to open pop up.
So far I haven't seen any effect of ending that process after iTunes is closed. I can't promise anything though. But it worked for me.
I'd like to see it fixed though, kind of a pain to have to do that.

Com.apple.outlook.client.exe CPU usage

On my laptop com.apple.outlook.client.exe always starts when I plug in my iPhone and sync it with itunes. It uses around 50% CPU and using my battery although I don't synchronize my iPhone with Outlook. Is there a way to avoid this? The process keeps running even after I have closed iTunes and disconnected the phone.
I am using Windows 7 64 bit with the latest iTunes version.

Same here on a Win XP with newest iTunes 10.5.1.42. Since I have this new iTunes, the "com.apple.outlook.client.exe" is accessing my harddisk constantly (although I only need the Notes to be synced with Outlook) and also when iTunes and Outlook are closed. Has someone a hint?

When trying to uninstall Apple Mobile Device Support: The Installer has insufficient privileges to modify this file: C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\com.apple.MobileSync.client.resources\ClientDescription50.plist.

When trying to uninstall Apple Mobile Device Support: The Installer has insufficient privileges to modify this file: C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\com.apple.MobileSync.client.resources\ClientDescription50.plist.

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Why do colors come over as Color Book swatches when I copy and paste to a new document?

Why do colors come over as Color Book swatches when I copy and paste to a new document? Original document has CMYK spot color swatches. I copy them and paste them in new document and it gets converted to a Color Book swatch. Why?

Check the spot color options of that document.
It's in the swatches panel's menu.

When I select a netflix movie on my iPad and push it to my apple TV, why doesn't the Apple TV take over the streaming, so that I can then use my iPad for other things?

From what I can tell, when I select the movie and hit the airplay button to move it to the apple TV, my iPad is still doing all the work of streaming the movie. Why can't the apple TV take over the heavy work at this point? I'd like to be able to use my iPad as more of a remote with an awesome interface for the apple TV. The netflix app on iPad is great, and the easiest way to browse movies, and pushing them to the apple TV is fantastic, but once the movie starts, I want to use my iPad for other things!!! Can this be put on the "to do" list for devs?

the guy behind you wrote:
From what I can tell, when I select the movie and hit the airplay button to move it to the apple TV, my iPad is still doing all the work of streaming the movie. Why can't the apple TV take over the heavy work at this point? I'd like to be able to use my iPad as more of a remote with an awesome interface for the apple TV. The netflix app on iPad is great, and the easiest way to browse movies, and pushing them to the apple TV is fantastic, but once the movie starts, I want to use my iPad for other things!!! Can this be put on the "to do" list for devs?
Have you tried the Remote app on iPhone/iPad to control AppleTV, do searches etc? Should be easier than the remote alone and this does not involve Airplay.
Please note, only users read/comment here - your idea is quite sensible in my view (maybe have a 'Continue viewing on AppleTV' option or something. I doubt this would be high on Apple's roadmap but send them feedback here:
http://www.apple.com/feedback/appletv.html

Why does my WD2GO Pro app keep shutting down when I'm trying to access a file?

Ive invested in a WD My Book Live 2TB network hard drive and the associated WD2GO Pro app for the ipad.
This is great for tiny files (1-2mb) but anything over 20mb make the app shut down.
Why is the ipad shutting down? Cant it show a PDF over a certain size?
I know I can open it in other programmes (PDF by corporate smalltalk) but WD2GO provides the facility to create a URL link to the hard drive, thus allowing me to email this link to clients / printers etc.
The silly thing is that if Im really quick I can send the link but if Im longer than about 4 seconds the app shuts down.
Frustrating isnt the word!
Hope someone somewhere out there has an idea. Just please dont say that the new Ipad solves this problem as Ill be (forced) into upgrading lol
J

Open a Finder window. Select your Home folder in the Sidebar on the left then open the Library folder then the Caches folder then the com.apple.safari folder. Move the Cache.db file (might say ApplicationCache.db) to the Trash.
Try Safari. If it crashes again, follow the instructions for uninstalling then reinstalling Flash > Troubleshoot Flash Player | Mac OS
Restart your Mac Try Safari.

Why has my iBook started to completely shuts down when power runs out?

I purchased my iBook G4 in early 2006 (OSX 10.4.11)
Until last week, I would regularly use my laptop until the battery charge was used up. I would get a low charge warning and it would automatically sleep. I could then plug it in to charge. When it was plugged in, I could touch the track pad or power button and all of the programs that were open when the power ran out would be there, just as I left them.
This has recently changed. Now when the power runs out, I receive the same low charge message, but instead of sleeping, my computer completely shuts down. When I press the power button to reboot, everything starts back up fine, but I get a message that my date and time are off and need to be reset. I then go to the Date and Time menu, which automatically updates through my wireless connection.
My questions are:
1. Why is it shutting down instead of sleeping?
2. Why is my date and time reseting to an incorrect date and time?

The difference is that in the past, your battery shut the computer down when their was enough juice to safely sleep the machine. Now it thinks it has enough juice, but it's truly running out. The battery is necessary to maintain the date and time in the computer.
Your battery needs to be calibrated. You should follow the instructions at:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1959.html
This will allow the battery to truly know how much juice it has left.

How come everytime my Mac shuts down, when I turn it back on ,Garageband has to Re-Download the program files?

How come every time my Mac shuts down,when Iturn it back on,Garageband has to Re-Download the program files?

Check this article http://support.apple.com/kb/HT1547 and this one http://support.apple.com/kb/HT2341?viewlocale=en_US
If it sounds like a RAM issue it could be one of the RAM chips has failed. You could try removing the RAM one at a time and see if it starts with one still installed.

Why is my computer shutting down when i try to sync with itunes

does anyone know why my computer is shutting down when i'm trying to sync my i pod. I have tried reinstaling itunes but it hasnt helped.

iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device
or maybe:
iTunes for Windows: System restarts, blue screen, or quits unexpectedly when accessing iTunes Store

Why doesn't the apple store give the same 3 year guarantee that John Lewis gives

Hello!
It would appear that John Lewis are also selling the new macbook pros for the same price as the apple store, but with a 3 year guarntee (presumably you would also get the 1 year warranty provided by Apple too), why does the Apple Store not also give a 3 year guarntee?
Kind regards

AppleCare IS an extended warranty.
See also this:
Apple Products and EU-wide Consumer Laws:
http://www.apple.com/uk/legal/statutory-warranty/

Why doesn't com.apple.IE.client.exeshut down when Mobile Me finishes sync?

Similar Messages

Maybe you are looking for