Why doesn't default CREATE USER form show a "Check" Page before submitting

Hi
Interesting question.
When I create a User (using my Customized Create User Form), and I press SAVE, the Form is submitted immediately. There is no "stop-and-check" page, which allows one to review the entries made BEFORE submitting the form itself.
For example : when EDITING or UPDATING a User, and you press "Save", the form is not submitted right away. Instead, a new page opens, where you can review the changes you made, to ensure that they are correct. In fact, at the bottom of this new page, there are 4 standard buttons : SAVE...........RETURN TO EDIT............CANCEL
This is a very good system, because it allows you to check your entries, and make sure they are correct, before pressing SAVE again to submit.
However, the "Create User" form does not have this same arrangement.
Is there any way to customize the Form, so that, when creating a User, and you press SAVE, a "check-page" first shows up (just like when updating/editing a user) ?
Thanks

Similar Messages

OIM 11GR2 - mechanism for restoring default adf user forms - create user

Hi All
Our developers has pubkished multiple OIM sandbox and create user form is broken
: the user creation form does not appear - only a html <div> tag .
The developer reverted the form using the em/console - then he ran the catalog sync job but all he can acheive is a blank form not the original user create forms
How do we restore the forms to thier original state.
Thanks

Not sure if this helps. But try these steps mentioned in the developer's guide. Once I did some UI customization in identity console and could not load my page after that. I followed these steps and was successfully able to restore it back. You can give a try and in step 6 try to select some known sandbox name which did not have any issues.
1. Login to Oracle Enterprise Manager.
2. In Application Deployments, select oracle.iam.ui.console.self-service.ear.
3. On the top-right of the page, select Application Deployment, and then select MDS Configuration from the list.
4. At the bottom of the screen, select Runtime MBean Browser under the Advanced Configuration section. The right side of the screen refreshes.
5. Click the Operations tab.
6. Scroll down and identify the listMetadataLabels MBean operation and invoke it. Select the MBean operation that does not take any parameters. Select the sandbox precreate that you want to restore, and copy it to the clipboard.
For example, the value you copy can be similar to: Creation_IdM_test_09:25:00.
7. Click Return to go back to the Operation tab.
8. Find the promoteMetadataLabel MBean operation.
9. Invoke the promoteMetadataLabel MBean operation, and enter the value that you copied in step 6.
10. Restart Oracle Identity Manager.

Gaps appear in IE 6 browser window for hidden fields in Create User form

Hi,
I need an urgent input on this one.
I hid an OIM default attribute for users in the 'Create User' form by modifying clear_all_fields.js
The field is hidden from the 'Create User' page fine!
But if I open the page from Internet Explorer 6 it shows a gap in the place of the hidden field.
For Mozilla 3.0.5 the gaps are not appearing.
I tried removing these gaps by deleting the tags and the field in the clear_all_fields.js
or, by reducing the dimension of the spacer.gif in GenerateCreateUserForm.jsp.
But it reflected no change in the form look n feel.
The requirement is to hide the fields and not remove them.
Any suggestion as to what may be the way out?

Thanks for the update Leonard. This would be an extremely useful plugin. I've been looking for it on http://labs.adobe.com/technologies/ under the plug-ins tab but have been unable to find it. It wasn't even there in the Pre-Release Programs. Is it located somewhere else or with a different name? Please let me know.
Meanwhile, I've been trying to write my own VB script to get the button clicked. Here's what I've come up till now-
FindText
HiliteList.Add->CreateWordHilite->SetTextSelect->GetBoundingRect->PointToDevice
The last function seems to be deprecated. Also there's nothing to connect the text highlighted by findtext with HiLiteList.Add. I guess
I may have to use the JSO word search method.
Any advice, as always, would be much appreciated.

Why doesn't my TestStand deployment installation show up under my Windows start menu of my target machine?

Why doesn't my TestStand deployment installation show up under my Windows start menu of my target machine?
I have successfully installed working deployments to target machines. However, I was expecting to see the installation listed as "My TestStand System A" in my start menu, but it is not. Am I misunderstanding something here?
Also, if I peform a different second deployment to the target station like "My TestStand System B", all of the LabVIEW files from my previous installation for "My TestStand System A" disappear from the target directory (c:\Program Files\My TestStand System A).
I am using TestStand 4.2.1 Professional on the development station with Windows XP and LabVIEW 2009.
Solved!
Go to Solution.

Thanks Paul,
That solved my second problem and inspired me to search deeper for the answer to my first problem. The answer is in the "Distributed Files" tab, "installer properties", "Create a Program Item" checkbox:
Wouldn't it be nice if this was automatically checked by default for the main sequence files? Wouldn't it also be nice if "Upgrade Code" was automatically regenerated by default whenever we saved the *.tsd file under a different name?
Thanks again,
Eugene
Message Edited by Eugene12 on 05-06-2010 04:27 PM

Mandatory Attributes in Create User Form

Hi All
i want to make the mandatory fields in create user form (ie Organization name) as optional.
For this i edited the FormMetada.xml file by making optional as true. (in the attribute reference for Organization field in User management section), as mentioned in the docs.
Now when i try creating user, it shows me 'You do not have permissions to perform this operation' error.
while when i give some value in the organization field, then it creates the user.
please provide some pointers in this regard.
Thanks.

You MUST provide an organizatation name. There is a system entity adapter on the Users data object. You cannot avoid populating this.
-Kevin

Modifying default tabbed user form

I want to prevent a particular attribute from showing up in the default tabbed user form. I still want the attribute to exist and I do not want it to be secret, I just don't want to see it show up at all. Any ideas on how to do this? I am using IDM 7.1.
Thanks!

Here is a sample code, which I have used in some of my codings
<Field name='Email'>
   <Display class='Text'/>
      <Property name='title' value='Email'/>
   </Display>
   <Disable>
      <not>
         <neq>
            <ref>accounts[Lighthouse].emp_type</ref>
            <s>Contract</s>
         </neq>
      </not>
   </Disable>
</Field> If the emp_type is other than Contract, then only the email shows up for that employee.
You can also try for multiple conditions in the Disable
null

Want to add a prepopulated User defined field in create user form

Hi,
I have an entity adapter which will perform a pre-insert check on the user group of the user logged in to the oim.
If the logged in user belongs to a group say "IT ADMIN", another validation check will be imposed on the create user action performed by him.
If not from "IT ADMIN" group then create user action will be handled normally.
Now the catch is, how would I determine the group name of the user logged in from the adapter code I have written?
I decided to keep an User defined field "Created by" in the create user form which will be non-editable and auto-prepopulated with the group name of the logged in user. This way I will be able to map the variable field from the User definition drop down list while mapping the adapter variables.
May you please guide me how I can achieve this?
Would highly appreciate suggestion/inputs.

Thanks for all your replies!
However I am still in dark.
I tried to retrieve the groupname using tcUSerOperationsIntf. But iit tries to retrieve the group name of the user getting created.
Please note, the group name I want is not of the user yet to get created, but that of the user creating it i.e., the logged in user.
My requirement is to have this created_by field in the create user form already prepopulated with the group name of the logged in user.
So that I can put a check based on this field value in the netity adapter.
If the group is IT ADMIN then proceed with the validation.
Else no validation required.
In short, I want to know,how can I auto-prepopulate a UDF in Create USer form?

Why doesn't my create pack work?

Why doesn't my create pack do anything that I need it to do. Can't save to pdf, can't retrieve, doesn't recognize format. The free trial version worked; the subscription does not.

If you moved Mail out of the Applications folder, then applied the security update, Mail has been disabled.
It must stay protected in the Applications folder, or you risk the possibility that malware might change it and use it to send spam.
Mac OS X v10.6: "You can't use this version of Mail…" alert after installing Security Update 2012-004

How to avoid special charecters in create user form

Hi all,
I am new to Sun IDM.Please u people have to help me in giving the solution.
Actually,in create user form ,we have first name and last name text fields.These two fields accept any special charecters.I want these fields to accept only alphabets.Do i need to create new rule for it?Please tell me the steps to be done to allow only alphabetic charecters in this fields.Thanks in advance,
regards,
suresh

Hi,
I should thank for the quick response u have done.But,still my problem was not solved.I did wat u hav said in the last reply...Now iam getting "1" in that create user form.I have send the XML code of the "isAlpha" and "Firstname"..Please check whether i have done any mistake..waiting for ur reply.
<Rule name='isAlpha'>
<Description>Tests to see if testStr is comprised of only alpha characters.</Description>
<RuleArgument name='testStr' value='testStr'/>
<block>
<defvar name='testList'>
<appendAll>
<rule name='Alpha Numeric Rules:AlphaCapital'/>
<rule name='Alpha Numeric Rules:AlphaLower'/>
</appendAll>
</defvar>
<containsAll>
<ref>testList</ref>
<rule name='Alpha Numeric Rules:stringToChars'>
<argument name='testStr' value='$(testStr)'/>
</rule>
</containsAll>
</block>
</Rule>
<Field name='global.firstname'>
<Display class='Text'>
<Property name='title' value='_FM_FIRSTNAME'/>
<Property name='size' value='32'/>
<Property name='maxLength' value='128'/>
</Display>
<Validation>
<rule name='Alpha Numeric Rules:isAlpha'>
<argument name='global.firstname'/>
</rule>
</Validation>
</Field>

Why can I only create 4 forms when I have purchased the entire package at 100+ dollars?

Why can I only create 4 forms when I have purchased the entire package at 100+ dollars?

FormsCentral can be used from anywhere, but to purchase a subscription you need a credit card with the mailing address in one of the countries supported for purcahse:
http://forums.adobe.com/docs/DOC-1375
The partner can purchase if they have access to a card in one of those countries. Alternatively they do not need to purchase a subscription to edit forms that you've created, they do in order to create multiple forms of their own, but by your sharing forms with them at the "Co-author" level they have access to the editing. Here are the instructions to share a form:
http://forums.adobe.com/docs/DOC-2462
Thanks,
Josh

Add user validation in create user form during Configure User Object Classe

Hi friends,
I like to add a user validation code (javaScript or PL/SQL) into create user form during Configure User Object Classes.
Is any way to pick user information and role assignment for validation in Portal side?
or pre event in OID provisioning befor loading LDAP?
We like to make a rols assignment validation. But portal does not have this function.
TOM, Any suggestion?
Thanks!!

after study, portal form --LOVGroupSearch take a role search and display user name for select role.
Who know we are can find system object LOVGroupSearch in portal or OID?
the source SCR as /oiddas/ui/oracle/ldap/das/search/LOVGroupSearch?title=Role%3Fredirect=/oiddas/ui/oracle/ldap/das/search/LOVGroupSearch%3Ftitle=Role
When we search a role and added it. selected role appears in form Search and Select:.
When click role name in Search and Select form. system will display Group Members and group owner.
Who can find behind codes for this form or samilar pl/sql codes?
Thanks!!

Restrict list of Organizations on Create User form

Running OIM 11.1.1.5.0.
We have a couple of companies using our OIM for delegated administration. In the Create User form, if the user searches for an organization they see a list of all of our organizations not just the ones that they can place a user in.
If they place a user in an organization that is not in their auth policy they receive an error:
"You are either not authorized to create user in XXX organization or not authorized to create user in XXX organization without specifying a value for manager."
Is there any way to restrict the list of organizations in the search to the list in their auth policy?

I have have this:
Company A
-- Department A1 (although these are actually set as Organization type Company in OIM)
-- Department A2
Company B
-- Department B1
User Management Auth Policy for AdminA:
-- Data Constraint - Users who are members of Department A1, A2
But when AdminA uses Create User he gets a list of all Company and Department names in the Organization search popup.
Do I take it from your reply that this is supposed to work and it's something that I have setup incorrectly then?
Edited by: Ewan on May 4, 2012 7:37 AM

Cannot create user form portal

Hi
We have installed NW 2004 server on windows SPS9
While creating user form portal , i am getting the following error:
##0#0#Error#1#/System/Security#Java###An exception was thrown in the UME/ABAP user management connector. Message: . --> #2#BAPI_USER_CREATE1@QSACLNT000: ID=01, NUMBER=491, MESSAGE=You are not authorized to create users in group#BAPI_USER_CREATE1@QSACLNT000: ID=01, NUMBER=491, MESSAGE=You are not authorized to create users in group#
#1.5#000C295F1EB3004900000003000000B80004346CD09B385F#1183541868109#com.sap.security.core.persistence.datasource.imp.R3Persistence#sap.com/irj#com.sap.security.core.persistence.datasource.imp.R3Persistence.createPrincipalDatabag()#J2EE_ADMIN#313##pun45idmqa45vm1_QSA_5696050#Guest#104e58202a1211dcab81000c295f1eb3#Thread[PRT-Async 0,5,PRT-Async]##0#0#Error#1#/System/Audit#Java###An exception was thrown in the UME/ABAP user management connector. Message: . --> #2#BAPI_USER_CREATE1@QSACLNT000: ID=01, NUMBER=491, MESSAGE=You are not authorized to create users in group#com.sap.security.core.persistence.datasource.PersistenceException: BAPI_USER_CREATE1@QSACLNT000: ID=01, NUMBER=491, MESSAGE=You are not authorized to create users in group
            at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.handleBapiRet2Table(R3PersistenceBase.java:3136)
            at com.sap.security.core.persistence.datasource.imp.R3Persistence.doBapiUserCreateChange(R3Persistence.java:5265)
            at com.sap.security.core.persistence.datasource.imp.R3Persistence.doDispatchWrite(R3Persistence.java:3622)
            at com.sap.security.core.persistence.datasource.imp.R3Persistence.createPrincipalDatabag(R3Persistence
Any clue what has to be dome to make it working
Best Regards
Manoj

Hi Manoj,
Looks like your Portal uses the ABAP backend system QSACLNT000 as the
UME. Please ensure that the user being used to create other users in the portal
has sufficient permissions in the backend system also.
Regards
Srikishan

Why can I not create a PDF from a web page on my Adobe Acrobat 8 Pro on my new Windows 8 computer? It worked fine on my windows XP system?

Why can I not create a PDF from a web page on my Adobe Acrobat 8 Pro on my new Windows 8 computer? It worked fine on my windows XP system?

Acrobat 8 is not compatible with Windows 8, for the simple reason it was
created much before it and Adobe could not participate the changes to the
OS that Microsoft implemented many years later on. You need to buy the
current version for compatibility.

OIM 11gR2 Add combo box UDF on Create User Form

Hi.
We have created a new UDF on user form. It is a lookup field and has the following lookup associated: "Lookup.Users.Continente"
"Lookup.Users.Continente" has two values, both of them checked as Enabled.
From the form designer all the values are displayed when selecting one default value so it is reading correctly from the lookup.
We published the sandbox after this.
Then we created a new sandbox and tried to add that field to the Create User Page. We went to "Create User Page", customize it and add content from "Data Component - Catalog" -> "userVO" -> Select the UDF, clicked on "Add" and selected "ADF Select One Choice".
A new combobox is added but no values are shown. We have plublished the sandbox, restarted OIM, purged cache, etc... but it still shows an empty combo box. We have also tried adding it as "ADF Input List of values" but it does not add the field to the create user page.
Any ideas of what are we doing wrong?
The idea is very simple, just create a field with the same behaviour as, for example, "User Type" field. A combobox that displays the enabled values from a lookup...
We have also tried creating the UDF cheking the searchable option, searchable picklist and all the possible combinations.
Thanks in advance!!

oim version is oim 11gR2 with BP4

Why doesn't default CREATE USER form show a "Check" Page before submitting

Similar Messages

Maybe you are looking for