Why doesn't fcpx see my xml - its greyed out

I exported an xml from FCP7 and want to import it into X. On import it shows a greyed out xml file. Help please!

You need 7toX. FCPX doesn't read legacy XML files.

Similar Messages

  • Why doesn't Firefox see that I have Flash loaded on my computer?

    I have Flash 10.1.102.64 loaded on my computer and I can watch youtube videos on Windows IE. I just loaded Firefox 3.0.5 and when I try to watch a youtube video, it tells me I need to install Flash. Why doesn't it see Flash? Do I need to do something first?

    Safari>Preferences>Security
    Is "Allow Plugins" checked?
    If it is, follow the illustrated instructions here: http://forums.adobe.com/thread/1343084 to do a complete "clean install".

  • Imessage on Mac has my wifes phone number and its greyed out and i cant change it to my number (on the beta version of iMessage for the mac)

    hey-- so iMessage on ONE computer has my wifes phone number in under iMessage and its greyed out and i cant change it to my number.  any ideas?  ive done what people have suggested on these forums, e.g., check your apple id make sure your number is associated with it etc.  how do i change the iMessage number from my wifes to my actual number?  thanks! R

    HI,
    This can depend on the the Apple ID that is used.
    I was under the impression that the invididual parts of an iCloud ID could be "registered" separately for iMessages but this may not be correct.
    I have an Apple ID that is based on a email from a source external to Apple. (an old Dial-up account email)
    I registered this for iCloud and at the time got an @me.com name as well.
    I also have two iPhones so I decided to use the @me.com name on one iPhone and the older Dial-up on the other.
    This seemed to work up to the OS X10.8.2 and iOS 6 updates.
    AT this points I did the OS X one first then the iPhones
    I got alerts in Messages on the Mac to add the Dial-up ID iPhone's number to Messages which I accepted.
    The Messages Menu > Accounts > iMessages showed the iPhone Number as an alternative Receive ID and offered itself in the Drop as the Send from ID.
    I then set up the second iPhone and got an alert in Messages to add the Apple ID and the iPhone number to Messages.
    I said no to this.
    At iOS 6 this did not get added to the Messages > Preferences > Accounts > iMessage panel.
    However at iOS 6.0.2 the iPhones are showing their own Numbers as Greyed out  and even though I refused again the @me.com ID and second iPhone's Number they have been added to the Message Menu > Preferences > Accounts > iMessages pane although they are not ticked.
    The only link these two Apple ID Names have is that they are both associated with the iCloud Account.
    (I Can log in to the same iTunes account with either name, and post here, and access iCloud in a web browser - the password is the same).
    I have successfully managed to get one iPhone to have it's greyed out Number ticked so it can accept iMessages sent to the Number.
    This involved removing the Apple ID on that iPhone, Closing iMessages, restarting iMessages and then re-adding the Apple ID
    I did get an alert to say the ID  would not work anywhere in iMessages when removing it.
    It was 24 hours before I got an alert in Messages again to add the iPhone Number and Apple ID (I said no and they are not active but do show in the iMessage account on the Mac)
    I am a little confused by this bit:-
    ...ONE computer has my wife's phone number in under iMessage and its greyed out ...
    I can see the iPhone Numbers in Messages Menu > Preferences > Accounts >iMessages Account pane but they are not greyed out even when not active
    They are only greyed out on the iPhone's themselves.
    I would also make sure the Apple IDs used on each computer and it's related iPhone are separate from each other.
    9:52 PM      Tuesday; November 27, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I havent any vocal loops on logic pro. its greyed out. How do i access this?

    I havent any vocal loops on logic pro, its greyed out. How do i access this?

    Have you downloaded the additional content?
    Go to menu bar in Logic.. and under Logic Pro/Download additonal Content, you will find what you need to download there..

  • My EBay app has disappeared from my iPad! When I go to App Store to open it its greyed out and won't let me

    My EBay App has vanished from my iPad! When I go to apps stores to try to re-open it its greyed out!! HELP!!

    Are restrictions on?  Check Settings > General > Restrictions.
    There are installing apps and deleting apps restrictions possible.

  • Really having problems with organising documents in pages. For example, deleting pages deletes the whole section and I cannot insert a section break as its greyed out & sending an object to background deletes several pages - what the **** is going on???

    Really having problems with organising documents in pages. For example, deleting pages deletes the whole section and I cannot insert a section break as its greyed out & sending an object to background deletes several pages and trying to insert a text box autmatically creates new pages- what the **** is going on??? Is this programme really this badly thought out? I thought everything apple was supposed to be intuitive!?!?!? Help.

    You can not insert a section break into a textbox.
    You appear to have a lot of objects with wrap set, that once you take them out of the flow of text (by sending them to the background) causes the text to reflow and contract into fewer pages. Pages is almost unique in the way it forms up pages in Word Processing mode only so long as there is text on them.
    I suspect you probably have hammered away at returns, spaces and tabs as well to position things, which only works to add to the mess.
    Download the Pages09_UserGuide.pdf available under the Help menu and swot up a bit on how it works.
    You may find this a usueful resource as well:
    http://www.freeforum101.com/iworktipsntrick/
    Peter
    PS There is quite a lot of programming in OSX that is far from "intuitive". Pages is easy at one level, when using the templates, otherwise it can be quite frustrating.

  • Why my wifi button on my ipad2 is grey out and faded

    why my wifi button on my ipad2 is grey out and faded out

    http://support.apple.com/kb/TS1559

  • How can i use perspective warp in trial version. its greyed out

    i have downloaded trial version to try handson Perspective warp feature but its greyed out. how can i use it?

    Puppet Warp, Transform>Perspective, Transform>Warp etc. can work without GPU acceleration (Test by CS6).
    But it is necessary to unlock the background layer (double click in the layer panel converts the background
    layer into an unlocked Layer0).
    Best regards --Gernot Hoffmann

  • 10.9.4 no folder background change, its greyed out

    10.9.4 no folder background change, its greyed out since I updated. both computers i can't change the folder back ground color
    Thank You
    Dick

    I figured it out. Under the folder actions/arange by: I changed to NONE and this allowed me to change the background color. It appeared after I did the update the Arange BY was changed.
    I personally don't care for the white backround and a light grey is easier on the eyes. I wish that the background color be change dglobally for all folders no matter what the arange would be. Te ac only allows this on folders with icons.
    Thank you for the response.
    Dick

  • Music wont play on my phone it says its there but its greyed out and wont play what do i do?

    Music wont play on my phone it says its there but its greyed out and wont play what do i do? Ive already re downloaded the music but its not playing on my iphone.

    Ok i think i have found out how to do it. Unplug your i phone, go to settings and then reset then reset all data and settings. This will warn you that it is going to erase eveything on your phone.
    DO NOT BACK UP BEFORE HAND
    then restart your phone and restore back up from when you donwloaded the new IOS5. This should sort out your problem :-)

  • Why doesn't itunes see that my ipod is a video ipod?

    Hi,
    I am getting really annoyed with this. I have always used a photo ipod 30GB, but I now have a video one. However when I try to add videos to the ipod itunes tells me that not all songs were added to the ipod because they cannot be played on this ipod.
    Also, when I go to preferences the video area is greyed out.
    What can I do?
    I have reinstalled the software, and itunes itself. I have restored the ipod, updated it to 1.1.1, and I have looked through all the online tutorials, but I still can't do it.
    My friends ipod also has the same problem on my PC.
    WHY?
    PLEASE, PLEASE HELP - I'm going out of my mind!

    Hi mattweb,
    Windows is probably confusing your iPod with a USB network device. In this case, definetely try assigning your iPod a different drive letter.
    If "My Computer" recognizes your iPod, then try performing the steps below:
    1 - Don’t plug in your iPod yet.
    2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
    3 - Click on the "Disk Management" button in the left panel area.
    4 - Now, with "Computer Management" and Control Panel windows opened, reset your iPod, and connect it.
    5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
    Here's what it should look like:
    Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
    For more details, see this article:
    Windows confuses iPod with network device / Changing drive letter
    I hope this helps you,
    -Kylene
    If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

  • Apple TV doesn't see iphone add remote greyed out

    Hi There
    Wife just got a new iphone, I have it synced/paired to her PC's itunes and also paired to my imac itunes which has our music collection (not syncing just have music set to manage manually). Have downloaded the remote app and it connects wonderfully to my itunes and hers but I cannot add remote on our apple tv the option is greyed out on apple tv.......I have checked the wifi network is the same on all, checked the fire wall settings are correct and pretty much everything else. On the apple tv screen it says to start by downloading the remote app which just in case I have done to my imac as well.....I am wondering if my issue is because the itunes library that is streamed to the apple tv is different to the one that the iphone is synced to (ie her PC)........one thing I have noticed is that apple tv doesn't appear on the devices list on her PC.......not sure why this isn't working but its driving me nuts have looked all through the discussions and can't find a solution

    I'm not really sure what criteria is necessary for the remote option to show up on the tv, I'm surmising it's simply a fault (which I was hoping could be addressed by a restart). Another option would be a need for the tv to actually detect a wifi network before it enables this option, although mine works on an tv which is connected by ethernet and although that ethernet network is connected to a wifi network, I'm not sure the tv could know that.
    The problems you now seem to be experiencing seem to be network related, and I wonder if you are now experiencing interference. You could try changing your wifi broadcast channel to see if that helps.

  • Why Apple is silent about 4s wifi getting greyed out and not responding to this issue? many ppl suffer from this and this is absurd!

    Why Apple is silent about iPhone 4s wifi getting greyed out with iOS updates 8.0.2 and 8.1 and did not respond to this issue officially? Many people are suffering from this affected service. How can you trust us to buy new iPhones when you stop supporting us with the ones we have since they are still upgradable to the latest iOS.
    Is there any chance that we will be given the support and would this issue be fixed with any upcoming updates? My iPhone when its battery is drained totally and I start it again the WIFI works until I try to choose another network or somehow I disable it then blackout!
    This is definitely a software issue that we never had problems before this update.
    Show us that you care for your products at least and provide us with a solution please.

    nartal wrote:
    That doesn't help at all.. I can only have it enabled if the battery gets drained out totally then when I restart it the WIF is on. then back greyed out.. that is not a serious reply, really!
    Yes, it's a serious reply. Did you actually read the information at the link I posted? Especially the last sentence? The fact that it appeared when you updated to iOS 8 has no bearing on the validity of the article. It is not specific to any version.

  • Append to XML remains greyed out

    Hi folks,
    I am using MII 15.0 SP2 Patch 8. I created a new transaction having a xML transcation variable called "test" defined as you cans ee in below screenshot. It is a plain XML having a root node called options.
    Thereafter I created a new transaction adn placed an assignment block there. I treid to use append XML link type to extend my transaction variable. Unfortunately, when trying to append some new xml to test{/OPTIONS}, append XML functions remain greyed out...see screenshot below
    Any idea why that happens? Thanks for your help!

    Hi Anuji, thanks for your answer, u r right. But what if I do not want to choose some value from menue? My plan was to define a new XML segment as string in Expression Editor and append it to my XML. Does that mean this is not possible?
    I somehow need to build a multiline XML looking like this:
    <option>
    <item><text>content...</text></item>
    <item><text>content...</text></item>
    <item><text>content...</text></item>
    <option>
    Content should define a multiline "where clause". Eventually, I want to map resulting XML to options input section of RFC_READ_TABLE to query data from ERP using JCO connector.
    What's a suitable approach to get there?
    Greetings, Marco

  • My phone goes silent mid song, the song shows its still playing but no sound. if I try to turn up the volume its greyed out

    My phone goes silent mid song. It shows the song is still playing but no sound. If I try to turn the volume up its grayed out...how do I fix this?

    try doing a soft reset. push and hold the home button and power button at the same time until the phone powers off completely. only release the buttons when you see the white apple pop back up on the screen if this doesn't work you will likely have to do a complete factory reset which can be found in general settings of the phone. hope this helps!

Maybe you are looking for