Why doesn't FF 16.0.2 display Yahoo! Finance Interactive Charts?

I've just installed the latest upgrade (Firefox 16.0.2) and it still won't load the Yahoo! Finance interactive charts. It works in Chrome, so it's not my Java installation. Any idea when this will be repaired?

You are reading text but comparing it to a number.  The solution is to either compare to text such as "-1" or coerce the text item read to a number, e.g. set economy1 to text item 1 of fileContents as number.  Don't forget to reset the text item delimiters.

Similar Messages

  • HT3131 Why doesn't Apple mention using the Display control panel's "Arrange" feature to move the menu from the Macbook's display to the EXTERNAL display? THAT'S the real answer to make Clamshell mode work, but it's not mentioned in any Apple documentation

    After a recent OS update, Clamshell mode quit working. I couldn't find any Apple documentation
    that would help. So many people were stabbing around in the dark, until I finally found the following information
    that is lacking from any Apple documentation that I've been able to find.
    Here's what I found to be the most helpful:
    Forcing a MacBook to use the External Monitor:
    I tried about everything: Rebooting, switching off completely, removing and inserting the Thunderbolt->HDMI adapter etc.
    The only thing that finally worked was the following:
    1. Take it out of the dock and connect to Power and HDMI to the TV.
    Shut down the Mac. Turn it on and close the lid. It will now boot up on the external screen.
    Log onto the Mac, and put it in sleep mode (Option-Command-Eject).
    Put it back into the dock and wake it up with the spacebar.
    It should be OK now... until the next update...
    Note: One indication that you’re going to have extreme trouble with this is when (occasionally and without reason) the Mirroring Options icon shows up on the top icon bar.
    Other useful commands:
    “Command + F1” puts PC in Two-Screen MIRROR mode.
    If it’s REALLY being stubborn, do the following (Clamshell Must be open
    to see the arrangement tab.):
    In System Preferences > Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor (Yes, I know, it’s hard to grab ahold of it...) That will make your EXTERNAL monitor your main screen.
    You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the TV, make sure it’s asleep (Option+Command+Eject buttons) or your Menu Bar will automatically change back to the MacBook.

    After a recent OS update, Clamshell mode quit working. I couldn't find any Apple documentation
    that would help. So many people were stabbing around in the dark, until I finally found the following information
    that is lacking from any Apple documentation that I've been able to find.
    Here's what I found to be the most helpful:
    Forcing a MacBook to use the External Monitor:
    I tried about everything: Rebooting, switching off completely, removing and inserting the Thunderbolt->HDMI adapter etc.
    The only thing that finally worked was the following:
    1. Take it out of the dock and connect to Power and HDMI to the TV.
    Shut down the Mac. Turn it on and close the lid. It will now boot up on the external screen.
    Log onto the Mac, and put it in sleep mode (Option-Command-Eject).
    Put it back into the dock and wake it up with the spacebar.
    It should be OK now... until the next update...
    Note: One indication that you’re going to have extreme trouble with this is when (occasionally and without reason) the Mirroring Options icon shows up on the top icon bar.
    Other useful commands:
    “Command + F1” puts PC in Two-Screen MIRROR mode.
    If it’s REALLY being stubborn, do the following (Clamshell Must be open
    to see the arrangement tab.):
    In System Preferences > Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor (Yes, I know, it’s hard to grab ahold of it...) That will make your EXTERNAL monitor your main screen.
    You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the TV, make sure it’s asleep (Option+Command+Eject buttons) or your Menu Bar will automatically change back to the MacBook.

  • Why doesn't the new Google maps display correctly?

    When the new google maps site loads, it initially shows street lines and names but then they disappear. When entering addresses for directions the routes do not display at all.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    If images are missing then check that you do not block images from some domains.
    *Press the F10 key or tap the Alt key to bring up the hidden Menu bar.
    Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
    Check "Tools > Page Info > Media" for blocked images
    *Select the first image link and use the cursor Down key to scroll through the list.
    *If an image in the list is grayed and "<i>Block Images from...</i>" has a check-mark then remove this check-mark to unblock images from this domain.
    Make sure that you do not block (third-party) images, the <b>permissions.default.image</b> pref on the <b>about:config</b> page should be 1.
    Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
    Make sure that you allow pages to choose their own colors.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    Note that these settings affect background images.
    See also:
    *http://kb.mozillazine.org/Website_colors_are_wrong
    There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
    See also:
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *http://kb.mozillazine.org/Websites_look_wrong

  • Why doesn't Mozilla fix the Yahoo problem - it is a hacking issue?

    Dozens of people have strongly complained about Yahoo inserting itself in Firefox and hiding itself so it cannot be removed. This has been going on for at least a month.
    Why doesn't Mozilla do something to prevent Yahoo from HACKING into Firefox.? It is an obvious attempt to pre-empt people's browser of choice. Surely there is someone in the Mozilla group who can either alter the code to block Yahoo or at least come up with a solution that lets the average user remove the stupid Yahoo software.
    Thanks

    What a pathetic joke - the instructions to remove the unwanted Yahoo search engine tell you to open up the search engine list and remove Yahoo. BUT YAHOO IS NOT DISPLAYED IT IS HIDDEN AND CANNOT BE REMOVED.
    That horrible fact is what is so annoying. It is willfully hidden by either Mozilla or Yahoo forcing it down the throats of people who do not want it!!
    And a search on one's entire system does not turn up any reference to Yahoo.
    ONE MORE TIME, THIS IS MY COMPUTER NOT MOZILLA'S OR YAHOO'S.
    Please do what you know perfectly well is the right thing to do and provide a viable method for users to get rid of Yahoo.
    Why, Alice, can't you specifically answer my questions instead of spouting the drivel about providing features for a broad range of customers. There are hundreds if not thousands of user that are not happy about this stupid problem.

  • Why doesn't the weather icon display the current temperature in your "local" city?

    Why doesn't the current temperature display in the weather icon on the home screen?

    The application works and I do have location-based services on. I'm just wondering why the icon itself does not show the current temperature. Sort of how they upgraded the clock after show the current time.

  • Why doesn't the keyboard display lower case when this is selected?

    Why doesn't the keyboard display lower case characters when these are selected?

    The same reason physical keyboards have capital letters, easier to read. If the iPad keyboard is in caps you'd know because the Shift key would be colored blue.

  • Why doesn't Energy Saver have an option for displaying "Time" in the menu bar?

    Why doesn't Energy Saver have an option for displaying "Time" in the menu bar?

    I'll provide some Proof
    Link 1
    Link 2
    Link 3
    you are not the only person with this problem maybe it will come back in Mountain Lion who knows. 

  • HT2801 Why doesn't my dvd play in the usb superdrive?  I have a Retina Display Macbook 15"

    I have a 15" Macbook Pro w/ retina display.  Why doesn't the dvd play in the external usb superdrive?

    Again, it's a regularly purchased (Hollywood or so) movie DVD, yes? And it's not only this one DVD, but every other as well, yes? Please confirm.
    If so, it's the DVD Player app that hangs for whatever reason, and not a broken drive.
    Not that it's a "final solution", but just to see if you can generally play DVD's on this machine, would you mind installing and trying MPlayerX to play a DVD? It's a little app from the App Store, free of charge and much used around the globe. (Actually, you may want to keep it as it plays many more different formats...)
    Edit: Forgot to say that you will probably need to launch the DVD manually from MPlayerX, most likely after the DVD Player app crashed again.
    Let us know what MPlayerX does. And still, don't forget confirming the above, thanks.

  • Why doesn't the video app display libraries with filters?

    Why doesn't the video app display my shared video library like the music app does music? ie. no genre, tv show title. Or how about how displaying them like when i.m using the remote app on my apple tv? Either one of these two interfaces is better than loading four hundred thumbnails. The video app is useless when I want to choose a move from my shared library. If apple wants me to buy movies and tv shows from the iTunes store they should give me a better way to choose them from my library,

    Hi,
    You can also set the iPhone number by adding the Apple ID to the iPhone.
    This links the iPhone Number to the Apple ID.
    Soon afterwards a pop up messages will appear on the Mac saying the iPhone is using it's Number and the Apple ID (if it has not appeared in five minuted restart Messages)
    Accepting add the phone number to Messages as a "Send From" and Receive option.
    On both the iPhone and the Mac version of Messages you can then chose the "Send From " ID or iPhone number.
    8:50 PM      Monday; April 8, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Why doesn't Podcast display in iTunes Store V11.0.2? It used to. It's now blank.

    Why doesn't Podcast display in iTunes Store V11.0.2? It used to. It's now blank.

    However, for some reason, as of 1.0.3 version of the software it doesn't display Cyrillic Capital Letter Yu (Unicode 042E) in the artists' names.
    Is that the only Cyrillic character that does not display correctly? What do you get instead?
    There is no feedback form,
    All Apple products have a feedback channel. For the ipod it's here:
    http://www.apple.com/feedback/ipodnano.html

  • Why doesn't Page Display obey its setting in Preferences

    Using Reader 9.2. I have Page Display setting in Preferences set to 'Single Page Continuous'. Yet when I open a pdf, the Page Display is set to 'Single Page' instead of 'Single Page Continuous'. Why?

    abdu wrote:
    I want to display the page the way *I* like.
    I guess there are two ways to look at that. Since they created it, maybe they want you to see it they way "they" like. That's the basic premise behind PDF. But yeah, it can be a bit irritating for those on the receiving end.
    abdu wrote:
    As far anyone is concerned, the document setting could have been a default setting of the pdf creator tool and the document author is not even aware of this setting!
    Probably not. The default setting is "default" which allows the viewer to control it with their preferences.
    abdu wrote:
    So Adobe.. please fix this setting or add a checkbox to override the document setting.
    I think a checkbox is a fine idea.

  • Why doesn't SSRS like an IF Statement in my SQL Stored Procedure???

    I have multiple IF Statements at the end of my SQL Stored Procedure Process that utilizes a @ReportTypeName Parameter to produce the chosen report result set
    IF @ReportTypeName = 'HMO-POS New To HFHP - No Prior Year Member Spans'
    BEGIN
    SELECT DISTINCT
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV Member Contract Nbr],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV Member Subscriber Member Nbr],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Pkg],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV Division Nbr],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER EFF DATE],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER FIRST NAME],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER LAST NAME],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV Broker Name],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER ADDRESS 1],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER CITY],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER STATE],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER ZIPCODE],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE1],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE2],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE3],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER EMAIL],
    CONVERT(VARCHAR,CAST(CONVERT(VARCHAR, [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER YMDBIRTH]) AS DATETIME),101) AS [INDV MEMBER BirthDate],
    FLOOR((CAST (GETDATE() AS INTEGER) - CAST(CONVERT(DATETIME, CONVERT(CHAR(8), [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER YMDBIRTH])) AS INTEGER)) / 365.25) AS [INDV MEMBER AGE]
    FROM [#TempTable_Distinct_Individual_Member_All_Info]
    WHERE (CHARINDEX('HMO',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0
    OR CHARINDEX('POS',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0)
    AND [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR] NOT IN
    (SELECT [#TempTable_Distinct_Individual_Member_Prior_Year_Spans].[INDV MEMBER NBR]
    FROM [#TempTable_Distinct_Individual_Member_Prior_Year_Spans])
    ORDER BY [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR]
    END
    IF @ReportTypeName = 'HMO-POS Renewals'
    BEGIN
    SELECT DISTINCT
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV Member Contract Nbr],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV Member Subscriber Member Nbr],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Pkg],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV Division Nbr],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER EFF DATE],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER FIRST NAME],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER LAST NAME],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV Broker Name],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER ADDRESS 1],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER CITY],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER STATE],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER ZIPCODE],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE1],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE2],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE3],
    [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER EMAIL],
    CONVERT(VARCHAR,CAST(CONVERT(VARCHAR, [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER YMDBIRTH]) AS DATETIME),101) AS [INDV MEMBER BirthDate],
    FLOOR((CAST (GETDATE() AS INTEGER) - CAST(CONVERT(DATETIME, CONVERT(CHAR(8), [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER YMDBIRTH])) AS INTEGER)) / 365.25) AS [INDV MEMBER AGE]
    FROM [#TempTable_Distinct_Individual_Member_All_Info]
    INNER JOIN [#TempTable_Distinct_Individual_Member_Prior_Year_Spans]
    ON [#TempTable_Distinct_Individual_Member_Prior_Year_Spans].[INDV MEMBER NBR] = [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR]
    WHERE (CHARINDEX('HMO',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0
    OR CHARINDEX('POS',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0)
    ORDER BY [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR]
    END
    Microsoft Visual Studio and SQL Server Reporting Services did not like this! When I added my dataset and parameters accordingly, my Dataset had no fields...almost as if running the Stored Procedure in the background to get its Metadata was not working. I
    know this works because I tested it as a result of a straight EXEC Command. Why doesn't Microsoft Visual Studio and SQL Server Reporting Services not like this IF? I did end up getting around this by parameterizing the WHERE clause based on the @ReportTypeName
    chosen.
    WHERE (@ReportTypeName = 'HMO-POS New To HFHP - No Prior Year Member Spans'
    AND (CHARINDEX('HMO',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0
    OR CHARINDEX('POS',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0)
    AND [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR] NOT IN
    (SELECT [#TempTable_Distinct_Individual_Member_Prior_Year_Spans].[INDV MEMBER NBR]
    FROM [#TempTable_Distinct_Individual_Member_Prior_Year_Spans]))
    OR (@ReportTypeName = 'HMO-POS Renewals'
    AND (CHARINDEX('HMO',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0
    OR CHARINDEX('POS',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0)
    AND [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR] IN
    (SELECT [#TempTable_Distinct_Individual_Member_Prior_Year_Spans].[INDV MEMBER NBR]
    FROM [#TempTable_Distinct_Individual_Member_Prior_Year_Spans]))
    I appreciate your review and am hopeful for a reply.
    Thanks!

    Hi ITBobbyP,
    I have tested on my local environment and can reproduce the issue, the issue can be caused by the temp table you are using which will also cause the data not display.
    I have use below sample table and record to have a test and details information below for your reference:
    Right click the DataSet to select the "DataSet Properties" and click the query designer to execute the stored procedure by click the "!" to check if you can get the data:
    If you got some error, the issue can be cause by the temp table invalid, so please make sure you have add the query to create and insert  recored to temp table like below:
    CREATE PROCEDURE vickytest0311_1
    @ReportTypeName nvarchar(50)
    AS
    create table #VickyTest
    column1 int,
    column2 varchar(20)
    insert into #VickyTest values (1,'Test1')
    insert into #VickyTest values (2,'Test2')
    insert into #VickyTest values (3,'Test3')
    IF @ReportTypeName ='Test1'
    BEGIN
    select * from #VickyTest
    where Column1=1
    END
    IF @ReportTypeName ='Test2'
    BEGIN
    select * from #VickyTest
    where Column1=2
    END
    GO
    3. I recommend you to not use the temp table and you will not need to add the create and insert statement in the stored procedure.
    4. If you still got no data, please try to click the "Refresh fields" as below:
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Why doesn't the CC app work properly?

    I've been using Creative Cloud for some time now and am really loving it, however I must say it is a source of annoyance that the Creative Cloud app just doesn't work properly.
    Firstly, I used it initially to download all my apps, then after an update those apps no longer appeared in the "Apps" list. Now only those that have been installed since that update appear in this list. Why doesn't the "Apps" list display all of the Adobe CC apps that I have installed on my computer?
    Why does it keep reinstalling fonts? I'm always getting "Lush Script Regular" and other fonts being added.
    It regularly comes up telling me that Dreamweaver and Premiere Pro need to be updated, but always I get an error, then the update request disappears.
    I'm regularly getting 4 files that it can't sync - even though they are the same files as others in the folder. If nothing else, why can't I say "Great, got the message". Also, why is the error message just "due to server error" with no advice on how to resolve it? Why is there a server error on only these 4 files?
    It seems to me there are still some teething issues with the CC app, but what I don't understand is why they aren't being resolved much faster, given that this is the portal to the service.
    Of course, given Adobe I doubt I'll get satisfactory answers – a little jaded with their responses. Anyway, thought I'd at least post the questions.  

    Questapo I am sorry you have been facing difficulties with your Creative Cloud experience.  I don't believe it will be possible to address all of your concerns in one discussion.  I would not be surprised if at least three of the issues are related to the same root cause.
    First in order for the applications to be visible are you regularly needing to delete the OPM.db file?  You can find this listed as solution 2 in CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

  • Why doesn't my VGA adapter work to connect my iPad2 to my projector. I haven't had any problems in the past?

    Why doesn't my VGA adapter work to connect my iPad2 to my projector. I haven't had any problems in the past?

    Hey MarieF-D,
    Thanks for the question. The following article provides basic troubleshooting steps that may help to resolve your issue:
    iOS: About Apple Digital AV Adapters
    http://support.apple.com/kb/HT4108
    Troubleshooting
    If you encounter an issue using the Apple Digital AV Adapter or VGA Adapter:
    Disconnect and reconnect the adapter from the iOS device and display.
    Connect directly to the TV, projector, or external display using a known-good VGA or HDMI cable.
    Remove any VGA or HDMI extension cables or converters.
    Note that accessories that convert a VGA or HDMI signal to other video formats (DVI, Composite, Component) are not supported.
    Ensure that you are using the latest version of iOS. Some Apple Digital AV Adapters require iOS 5.1 or later.
    Note: When using an Apple Digital AV Adapter manufactured before early 2012 with iPad (3rd generation), you may see the "This accessory is not supported" alert. Dismissing the alert will allow you to use the adapter.
    For optimal performance, you may need to adjust the video resolution or settings for your display. If your display offers an "auto detect" or "factory default" setting, you may be able to use these options to optimize video resolution and display.
    Thanks,
    Matt M.

  • Why doesn't each 'page's info' adhere to the settings for the plug-ins?

    When I check my plugins, add ons, for updates, there are option blocks on the right that set whether or not to "Always Activate" or "Always Ask". My question is- -for every page that opens, there is a "page info" option we can check to see/check what is allowed or blocked under Permissions ... And* what the Permission 'settings' ARE for That* page. Why doesn't EVERY page display the Permissions' settings that we have Already set on the Plugins screen*(?). EVERY page has to have the permissions re-done for EVERY domain/server/site provider. Why* aren't the settings that are set on the Plugins screen Used* AS the 'Default' for every page/domain/site, etc.? Note*- if I DON'T change the permissions to "allow", for certain plugins, the page will not work*.
    Also, the "Java Deployment Toolkit 7.0.450.18 10.45.2.18" still* shows as "Vulnerable" After* updating (verified update*). So I found the option to 'Disable' this particular plugin. Now it displays at the bottom of the Plugin page, greyed out. However*... after updating to Java "SE7 U45" (..for 1 [One*] day ONLY, it showed as Up-to-Date, NOT vulnerable, on every 'page info' screen*) ... and Actually, it Still Does show as Up-To-Date after an Update check*..(??)... But on EVERY page info screen the "Java(TM) Platform SE7 U--Vulnerable Plugin!" is displayed (?). How can it be Up-To-Date and OK on the plugin check screen, but show as a "Vulnerable Plugin" on EVERY 'Page Info' screen?

    Sorry, RamboTrader ... I Thought I was replying to another guy that had made a suggestion to me*.. (MY bad*) ...
    ... But I'll try to answer some of your questions ...
    1- usually, "yes"* just make sure you Trust that site (if you have anti-virus, anti-malware, etc, and run a scan every week (or so) and Haven't come up with anything quarantined or removed yet, you''re probably safe there*
    2- sorry, "yes", there's Always a real danger... that's why we have the anti-everything we have (right?)
    3- depends on the site*. A Lot of sites don't need java at all (except to run their ads or commercials... 'targeted' or not). Adobe Flash or Shockwave should be able to handle stuff like youtube, etc (but if it doesn't*, just go into the 'Page Info' Permissions* and Allow the [Vulnerable] Java and see if that fixes it). It more than likely will.
    I think it's just a matter of Time* before Adobe* Flash, and practically Every other video app/player may be marked as "vulnerable"... like Java... because every one of them CAN carry a virus or trojan to us in some imbedded format. If JAVA couldn't find a way to stop them* (hackers, etc*) they either ..1-aren't smart enough, or 2-just gave up trying to stay ahead of them... (like the 'ad' says, some-unGodly-percentage-of-machines use Java already ... so They are making Their money*... what more do they need to do, really..?). They don't care* about us or our stuff, as long as we Buy More.... but I'm a bit jaded*.

Maybe you are looking for