Why doesn't final cut save my youtube password?

I always have to do one of those "application specific" passwords through Google. It works for once and then I have to reenter it (and subsequently get a new one) every time. It's annoying.
This is for Final Cut Pro X, fully updated.

Is it an FCPX issue or a google issue?

Similar Messages

Why doesn't Final Cut Pro X update songs from Garageband?

While working on a short film in Final Cut Pro X, I worked up a simple sound track in Garageband. I imported the Garageband project, aligned it, and discovered that I'd mistimed one of the sound transitions.
So, I went back to Garageband and updated the transition, moving the sound effect to the right spot to match up to the video, and then went back to FCPX. I dragged the Garageband project onto the original copy that I'd imported, and selected "replace" and ended up with... the original. After some experimenting, I actually went and deleted an entire track from the Garageband project and reloaded it in FCPX... still no change. How can I fix this?

Here's an update...
I made some changes to the Garageband track and saved it as another project... Final Cut refused to even detect it until I restarted Final Cut.
I have a sound effect that's placed at 1:32 in Garageband, and it ALWAYS plays at 1:31 in Final Cut, no matter how shift it around in Garageband. After changing the song in Garageband and sharing it to disk, I verified that the sound effect is happening at 1:32 by playing it back in Quicktime, so it must be Final Cut that's misbehaving.

Why doesn't Final Cut Express reconize my footage from my NX70

I had a Sony MC50 and it would read that footage and I could work with it. I bought a Sony NX70 and it will not read that footage. It is the same type file AVCHD 1080/60i FX! From what I see there is no defferance in footage. Only thing I changed was camera.

Ok so what your saying for what ever reason when converting the footage inside the camera it's not getting done right?
I'm saying that based on the specs, the camera is probably working as designed but perhaps in the internal conversion from 60p to 60i the data being output cannot be recognized by FCE. Not because it's being done wrong, but because there may be some leftover data embedded in the output that causes FCE to think it's not getting pure unadulterated 60i data. FCP and FCP-X are much more 'forgiving' about this than FCE is, probably because FCP and FCP-X support 60p AND 60i whereas FCE only supports 60i.
As I said before, call Sony tech support to inquire about NX70's handling of it's native 60p recording vs. its output at 60i. I'm just suspicious that is where the problem lies in FCE's inability to recognize the footage. It's more likely to be a design issue than a specific problem with just your NX70 but more research will be necessary. The fact that your friends can capture from the NX70 with FCP indicates the camera is functioning properly.

Why does my final cut express movie flicker after i put on disk using idvd

Why does my final cut express movie flicker after burning to a dvd using idvd. Its about 90 minutes long.

Hi
As Alchroma writes - more info needed.
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Encoding
• I use Pro Quality encoding
Brand and type of DVDs used
• I use Verbatim
• I use DVD-R
Burn speed set
• I set down this to x4 (or x1)
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

Why does my final cut pro is not responding every time I open it????!!!!!!

why does my final cut pro is not responding every time I open it?

As you give no background info nobody can possibly guess.
However, have you tried trashing the preferences?
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
There is absolutely no danger in trashing preferences and you can do it as often as you like.
The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones . . . instantly.

Why does our Final Cut Pro Batch Exports incorrectly name sequence files?

Why does our Final Cut Pro 7.0.1 Batch Exports incorrectly name sequence files?
For example I can Batch Export 10 sequences one of which is called:
"899-006TL013 It's Not Your Fault 800-509-2875"
Then the output for some of the files are along the lines of:
"899-006TL013 It's No#61386E.mov"
I have seen this happen with 1-6 files or not at all... is it just dumb luck?
What is going on here and is there any way to avoid or remedy this issue?
We first thought having the render destination window open caused it but that was not the source.
Any ideas?

I've run into the same problem with FCP 7.0.2 when exporting from the sequence using File --> Export --> QuickTime Movie. I exported a file today called "BSP - 01 - How You Can Be Sure You Are A Christian" and it came out as this "BSP - 01 - How You Can#1630". This is getting to be annoying. I also need to name these files the length they are. I'm hoping someone may see this and have a suggestion (besides shortening the file name). It seems like I've also seen this on shorter file names, but at the moment I can't prove it.

Exporting from Final Cut X to youtube

Hi, I've been trying to export a project from final cut X to youtube. It seemed to be working fine and I waited 6 hours as the share monitor slowing processed it. At the end the share monitor say 'successful' but now the actual video can be nowhere to be seen on the actual youtube account. Did I so something wrong?

it looks good - it was shot on a canon 600D
I did what you asked but not the I can't upload a photo on this thread (not my day)
here i'll type it out
format: H.264, 1920x1080 (1,888x1062)
AAC, 48000 Hz, Stereo (L R)
FPS: 29.97
Size: 2.05 GB
Rate: 21.20 Mbit/s
Size: 1,404 x790

Why doesn't iPod touch save articles in the Reading list for off line reading?

Why doesn't iPod touch save articles in the Reading list for off line reading?

Because Apple did not set it up that way. Email the list to you. The Users Guide says:
View an article in Reader: Tap the Reader button, if it appears in the address field.
Adjust the font size: Tap .
Share the article: Tap .
Note: When you email an article from Reader, the full text of the article is sent, in addition to the link.

Why doesn't my iMac G5 accept my password?

Why doesn't my iMac G5 accept my password?

When you are doing what?
BTW, what version of OS X are you running?

What are the best data and bit rate setting for uploading from final cut express to Youtube?

Can anyone suggest the best data rate and bit rate presets for uploading footage from final cut express 4 to Youtube? What settings will provide the best resolution, quality, and match the current youtube requirements?
Thank you in advance for your help,
Susan Kayne

It depends on whether you are using aspect ratios of 4:3 or 16:9.
Below is some simple guidance that will provide good quality with reasonably small file sizes.
The first part is for 4:3 video:-
1. File>Export Using QT Conversion.
2. The "Format" window should say, "QT Movie".
3. In "Use" select "LAN/Intranet" from the dropdown menu.
4. Click "Save" and when it has finished encoding, upload it to YouTube.
If you are making 16:9 video (Standard or High Definition) do steps 1 to 3 above.
Then when you have selected "LAN/Intranet" press the "Options" button and in the new
window that opens press the "Size" button and change the "640x480" to "853x480"
To do this you will have to click on the 640x480 and a dropdown menu appears.
Select "Custom" from the bottom of the menu and in the window that opens
you will see 2 boxes.
Put 853 in the first box and 480 in the second.
Click OK.
Then Save it.

Music from Final Cut Pro to YouTube. Legal or Not??

Hi Guys, just a quick question. Can you legally use free music from the Final Cut Pro Software Program in your monetized YouTube videos???? Can someone please shed some light on this for me. Cheers

Read through this recent discussion and see whether it answers your question.
https://discussions.apple.com/message/22836098#22836098
Russ

Final Cut Express with Youtube

Hi all,
I've been having this really annoying problem ever since I started using final cut to export movie files for Youtube and I can't find anything online to help me out, so hopefully one of you knows the answer!
Basically every time I export a video from FCE and upload it to Youtube, the video only fills a small part of the Youtube screen, rather than taking up the full video box, which looks pretty awful - Check out the example below:
http://www.youtube.com/watch?v=_G7n78FqrPs
Has anyone else had this problem? Or does anyone know the optimum export settings for Youtube so the video takes up the full screen?
Any help or advice would be greatly appreciated.
Many thanks,
Ben

Yes, I know the dimensions of the source video do not match the optimum Youtube dimensions, but this video fits the full screen before I put it into FCE so I must be doing something wrong within FCE which is messing with the video. Here's the properties for the video and the sequence (Last time I right clicked on the file outside of FCE; the properties below are what I got when I right clicked on the file and sequence within the browser)
Video:
Vid rate: 30fps
Frame size: 510x284
Compressor: H.264
Pixel aspect: Square
Field dominance: None
Sequence:
Vid rate: 25fps
Frame size: 720x576
Compressor: DV-PAL
Pixel aspect: PAL-CCIR 601
Field dominance: Lower (even)
Hope you can see something wrong in all that?!
Cheers,
Ben

Final Cut Save Window Locked

Ok, here's a weird problem I just had with Final Cut Pro. I was exporting a file out, went through the movie settings window adjusting the compression and sound, when I get a quick aim message from a client. So I do a quick reply the go back to save my movie when I noticed that Final Cut locked me out!
Basically what happened was I switched applications with the Movie settings still open and when I switched back to Final Cut I couldn't select the floating window. Both the Movie Settings and Export window are open. I can select the Export window and create new folders and move around in my browser, but I can't save because the Movie Settings window is still open, which I can't select to close, it's completely grayed out. So it got to the point where I had to Force Quit my project just to go back and try to re-export again.
So here's my question: Is there anyway to select or quit out of the Movie Settings when going back and forth between FCP and applications without having FCP lock me out? This happened to me before when I was exporting a file out and I went back to a file with all the export settings then came back to be locked out.

Very odd.
Have you tried to duplicate this problem?

WHy don't Final Cut Pro 7 recognize my sony hdr-sr11 camera.

Final cut won;t recognize the camera for log and capture. iMove doesn't recognize it either. Help

That's an AVCHD camera.
You connect it with a USB cable and use Final Cut Pro's *Log & Transfer* function to bring in the clips.
[AVCHD workflow in FCP.|http://documentation.apple.com/en/finalcutpro/professionalformatsandworkfl ows/#chapter=6%26section=0]

Why is my final cut pro so slow?

I just started using final cut pro on my iMac and I've noticed the performance is horrible. I have an event with about 20-30 clips in them, each 10-20 seconds long. The videos are shot using a DSLR using 60p with the AVCHD format. Even when I tried to scroll the event browser, the lag is 2-3 seconds long. The panel doesn't even scroll smoothly.
Here are my specs of the iMac.
Hardware Overview:
Model Name:          iMac
Model Identifier:          iMac13,2
Processor Name:          Intel Core i5
Processor Speed:          2.9 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          24 GB
Boot ROM Version:          IM131.010A.B05
SMC Version (system):          2.11f14
Do I need a better machine to operate final cut pro?

It is stored in my external drive, a thunderbolt raid drive. LaCie 5big.
http://www.lacie.com/products/product.htm?id=10607

Why doesn't final cut save my youtube password?

Similar Messages

Maybe you are looking for