Why doesn't Firefox Sync work in my home network, but at work?

Firefox Sync on my laptop does not work when my laptop is connected to my home network, but e.g. if I'm at my office.
The internet connection at my home is fine, I can surf the web with that very Firefox on both IPv4 and IPv6, DNS etc. is also working. Logging in to accounts.firefox.com also works, as does connecting Firefox to the Sync account. Only the process of syncing itself fails. On my desktop computer at home, I have exactly the same problems. When I open https://sync-209-us-west-2.sync.services.mozilla.com/ in a browser tab, I see a confirmation message that sync runs on that server, so apparently the network path between my computer and that server is free.
Upon investigation with Wireshark, I see the successful TLS handshake, then some packets from the client that are not answered and after some time the server closes the connection (Encrypted Alert). Apparently, no content is transferred between client and server. I attach a screenshot of how Wireshark sees the conversation between server and client (The image upload here didn't work so I put it on the web: http://ibin.co/1zXABHKdj5mA).
To exclude a possible misconfiguration or bad add-on, I created a clean new Firefox profile and connected it to my Firefox account, but this shows exactly the same problems.
Fun fact: Firefox on my Android phone does sync in my home network.
Below, I will link two log files, one successful sync (office network) and one failed sync (home network):
Sync @ office: http://pastebin.com/rZmfrbdL
Sync @ home: http://pastebin.com/a3KUCevJ

Any chance you are on a DS-Lite network at home? If so, what's your ISP? The home network symptoms look a little like https://bugzil.la/1118958

Similar Messages

  • Why doesn't Firefox Sync include favicons?

    Mozilla are you planning to support favicons for Firefox Sync?

    It's in the roadmap and almost ready to be launched: https://wiki.mozilla.org/Services/Sync/FxSync/FaviconSync

  • In Safari, why doesn't Internet Plug-in, stop plug-in to save power work anymore?

    In Safari, why doesn't Internet Plug-in, stop plug-in to save power work anymore?

    Yes, the Mozilla Plugin Check page is specifically for Firefox.

  • Why doesn't Firefox auto-update Flash Player like Chrome does?

    For security reasons and less hassle, I like Chrome auto-updates Flash Player. Why doesn't Firefox do this?

    Google Chrome has it's own version of the Flash plugin that is apart of the Google Chrome installation files.<br />
    So Google needs to do a full update with every Flash release.
    Firefox uses the Flash plugin as installed in your Linux distribution,<br />
    If your Ubuntu Linux distribution doesn't have an automatic update for Flash then you need to do that manually.
    *http://www.adobe.com/software/flash/about/

  • When saving files from the internet, why doesn't Firefox 'know' to put .jpg files in "Photos" and pdf files in "Documents"?

    When saving files from the internet, why doesn't Firefox 'know' to put .jpg files in "Photos" and pdf files in "Documents"? IE always saved photos in the "Photos" file and documents in the "Documents" file. Firefox makes me choose every time. Very annoying.

    How about if Firefox is programmed like IE in this ONE thing...
    When saving files from internet sources, if the file ends in a typical photo extension such as .jpg, .bmp, .tif etc. it defaults to save it in your PHOTOS folder.
    When saving anything like a .doc, .pdf etc. it defaults to save it to your DOCUMENTS.
    You could still change it to 'desktop' if that if really where you want all your photos and documents... or some other folder that you decide, but DEFAULTS to the LOGICAL folder.
    I have carpal tunnel SO bad that even typing this suggestion is painful and having to make the extra click along with moving the mouse EVERY time I want to save something is painful.
    ALSO, I shouldn't need a bunch of ADDONS to accomplish this. I tried downloading one and it did nothing. The problem still exists.

  • HT1766 Why doesn't Overdrive sync my iPhone to iPad?

    Why doesn't Overdrive sync to my iPhone and iPad? 

    Can you be a little more explicit about what you are trying to do, and what happens when you try? As stated, that isn't much to go on.

  • IMessage Beta doesn't work on my home wifi but it does at work, any suggestions why?

    iMessage Beta doesn't work on my home wifi but it does at work, any suggestions why?

    Hi carre13,
    Welcome to the Support Communities!
    The article below may be able to help you troubleshoot your Wi-Fi issue.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398?viewlocale=en_US
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    I hope this information helps ....
    Have a great day!
    - Judy

  • Why doesn't firefox highlight webpages already visited

    why doesn't firefox highlight webpages already visited

    Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Automatically start Firefox in a private browsing session"
    You can look at these prefs on the about:config page.
    *http://kb.mozillazine.org/browser.history_expire_days (180) (also affects saved form data)
    *http://kb.mozillazine.org/browser.history_expire_days_min (90)
    *http://kb.mozillazine.org/about%3Aconfig
    There are other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Next Generation Java Plug-in 1.6.0_16 for Mozilla browsers
    Update the [[Java]] plugin to the latest version.
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

  • I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled.  I got it to work one time on another network but not at home where I use Lightr

    I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled.  I got it to work one time on another network but not at home where I use Lightroom.

    Hi,
    could you please give us some info on what kind of network you have?
    Can other application communicate with the web?
    Thanks,
    Ignacio

  • I am trying to connect to my Wifi Network. It is a Galaxy Nexus. I am trying to connect to this Hotspot. I have an iMac that works fine with my network but for some reason with this computer I cannot connect.

    So far I have pulled the system configuration file, I have reset safari, I deleted all old passwords from the wifi network in Keychain I restarted both devices. I am at the end here and I cannot get it to work I have an iMac that works fine with my network but for some reason this computer will not connect. It is system wide specifically to my personal hotspot. I can connect fine to any other network (wifi) but just not mine. I have not changed any wifi settings. I have been trying to figure this out. I have a MacBook Pro Late 2006 model running Lion (10.7.5) So any ideas anyone? Please help!

    12. At a WiFi hotspot, you can't get connected.  The most frequent reason is the login screen for the WiFi hotspot is only able to be connected with a single type of browser.  If Safari doesn't work, try Firefox, Chrome, Omniweb, or Opera. 
    From my tip:
    https://discussions.apple.com/docs/DOC-6411

  • My printers works fine on my home network but disappears on a remote desktop terminal connection

    As I don't really know how to post a general addition to the knowledge base, I'm doing in Jeopardy style.  Here is the question to the above answer.  Well close enough.
    Many people have reported all over the net issues with printers working just fine on their home network  but disappearing when they connect to a server via RDT.  There are some legit updates needed where windows did not see anything but LPT and COM ports for printer re-direction assignment.  There are Mr. Fix it's for those and registry patches.  When all of that fails, the information highway seems to dead end.
    Here is what I learned today via 2 specific printers:  HP1022 and HP2840 lasjerjets.
    After many months of frustration and 7 1/2 hours with Microsoft advanced prof support I've finally pinned down this printer and a slew of others.  This problem as far as I have come across deals exclusively with HP printers.  In simple terms:  the drivers are flawed.  This 1022 is a prime example.  It prints locally and via TCP/IP just fine. I have about 7 other printers and dummy printers in my printer folder.  Enter a remote desktop session and ALL of them populate except the 1022.  This shows that the hooks and RDT finders are locating your printers and installing them properly as remote printers.  All except the 1022. 
      Log out of your RDT session: goto the local 1022 setup and change the printer driver to a PCL driver.  I used a 1200 PCL driver.  Now log back into your RDT server and hockus pocus! there is your printer.  Totally un-usable because the driver will not run this printer.  Caveat:  each time I did this XP crashed (I couldn't get to the properties TAB anymore -- I had to un-install the 1022 and then re-install it with at least 1 reboot in the process)
    Moving on we go to the HP OfficeJet/LajerJet2840.  Same thing.  It won't pass through as remote printer in RDT.  Go local.  Set the printer driver to AppleLaserWriter8500 and boom. (same logout, change, back in steps) and your LJ2840 shows up and works.
    While I will have to wait until tomorrow I am betting that this will fix the exact same problem with the HP Officejet 8500A all in one with the exact same problem.
    Hey HP?  Whats with the drivers??
    Another work around if you have a static enough environment is to install your local printer that will not show up under RDT on the server, and then point the port to your fixed IP on your router, and passthru port 9100 to your locally installed printer that is failing.  You can now be on RDT and chooses the network printer that is printing to the TCP address of your home (or office) router.

    As I don't really know how to post a general addition to the knowledge base, I'm doing in Jeopardy style.  Here is the question to the above answer.  Well close enough.
    Many people have reported all over the net issues with printers working just fine on their home network  but disappearing when they connect to a server via RDT.  There are some legit updates needed where windows did not see anything but LPT and COM ports for printer re-direction assignment.  There are Mr. Fix it's for those and registry patches.  When all of that fails, the information highway seems to dead end.
    Here is what I learned today via 2 specific printers:  HP1022 and HP2840 lasjerjets.
    After many months of frustration and 7 1/2 hours with Microsoft advanced prof support I've finally pinned down this printer and a slew of others.  This problem as far as I have come across deals exclusively with HP printers.  In simple terms:  the drivers are flawed.  This 1022 is a prime example.  It prints locally and via TCP/IP just fine. I have about 7 other printers and dummy printers in my printer folder.  Enter a remote desktop session and ALL of them populate except the 1022.  This shows that the hooks and RDT finders are locating your printers and installing them properly as remote printers.  All except the 1022. 
      Log out of your RDT session: goto the local 1022 setup and change the printer driver to a PCL driver.  I used a 1200 PCL driver.  Now log back into your RDT server and hockus pocus! there is your printer.  Totally un-usable because the driver will not run this printer.  Caveat:  each time I did this XP crashed (I couldn't get to the properties TAB anymore -- I had to un-install the 1022 and then re-install it with at least 1 reboot in the process)
    Moving on we go to the HP OfficeJet/LajerJet2840.  Same thing.  It won't pass through as remote printer in RDT.  Go local.  Set the printer driver to AppleLaserWriter8500 and boom. (same logout, change, back in steps) and your LJ2840 shows up and works.
    While I will have to wait until tomorrow I am betting that this will fix the exact same problem with the HP Officejet 8500A all in one with the exact same problem.
    Hey HP?  Whats with the drivers??
    Another work around if you have a static enough environment is to install your local printer that will not show up under RDT on the server, and then point the port to your fixed IP on your router, and passthru port 9100 to your locally installed printer that is failing.  You can now be on RDT and chooses the network printer that is printing to the TCP address of your home (or office) router.

  • Recently I was working on my home Network and lost my Password for my Home wireless connection. After many attempts, I remembered the password and was able to get in. Now the MacBook Pro only works at home on a Hard wire connection. I have an additional 9

    Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?

    I seem to have fixed it by putting <div  class="clearfloat"></div> after the navigation bar?

  • HT201412 Safari could not open the page because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work. Can you please help me. I've tried everything. Thanks ya'll!

    Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!

    Hello SavannahSweetie,
    I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
    Start with this section, and work your way down if needed.
    Basic troubleshooting
    Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
    Verify that you are in range of your Wi-Fi router or base station.
    Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
    Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
    Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
    Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
    All the best,
    Sterling

  • My iPad 1 apps keeps crashing. I have closed all running background apps,reset by holding power and home buttons but nothing works. Please its starting to get very frustrating and annoying.

    My iPad 1 apps keeps crashing. I have closed all running background apps,reset by holding power and home buttons but nothing works. Please help its starting to get very frustrating and annoying.

    What exactly do you mean by "crashing" and is it occuring on a specific app or under specific circumstances?

  • Apps are not working on my iPhone 4S but they work on my wifes iPhone 4

    Apps are not working on my iPhone 4S but the work on my wife's iPhone 4.

    You have to swipe once more (left to right motion).

Maybe you are looking for

  • USR_PROCESS_TRIGGERS or Response Tasks in OIM 9.1.0.2 seem inconsistent

    We have a scenario where an existing user is updated through trusted recon. The particular update needs to fire several unrelated adapters. For example, when a user is terminated in good standing in HR, they are given a grace period during which thei

  • Xf86-video-intel-2.5.0-1 causing "underrun in pipe b" errors

    Since todays upgrade to xf86-video-intel-2.5.0-1 I've been getting "Underrun in Pipe B" errors. The initial start of Openbox worked, but as soon as I switched to the virtual console and back, I'd only get a black screen in xorg, and the VC would be f

  • IMac 17" White Intel inverter cable

    I've replaced the LCD screen, but the cable, that comes out of the display and plugs into the inverter connector on the main circuit board, is to short. Is there an extension cable that I can purchase and where?

  • Reversal of customs MIRO.

    Hi, We have reversed a Customs MIRO due to some incorrect entries. However when I cheked the accounting document of reversal invoice, there are some entries of Price difference account which I am unable to understand. I followed the general procedure

  • Where is the Adobe AIR 3.2 SDK hiding?

    This is driving me loopy! I'm trying to locate the download for AIR3.2 SDK but whenever I find a link to it I'm directed to Adobe AIR 3.1.0.4880 SDK Am I missing something here? Could anyone shed some light on this for me please? Thanks, Mark