Why doesn't iCal print "Lists" in order, still, after how many different operating systems, and now with Lion?
I can't believe iCal List printing is still unsorted - HOW HARD CAN THIS BE TO FIX APPLE ?!!!!?
(bump)
Similar Messages
-
I have been unable to add an HP Photosmart C4480 printer to my existing printer list using a USB connection. Software seems to be available and thought I had downloaded it, but doesn't work. Any suggestions?
Try deleting the printer, restarting, and trying software update again.
If that doesn't work, you can download the entire HP package here:
http://support.apple.com/kb/DL907 -
HT2822 Why doesn't a network list appear anymore yet Apple TV says I'm connected to the internet?
Since updating Apple TV I lost the usual main menu. Now I can't even see Network lists like I did before the update. The main menu show options for Computer Sharing and Settings. Apple informs me that I am connected to the Internet through built in ethernet so why doesn't a network list appear?
Thanks.Welcome to the Apple community.
Are you actually connected using ethernet, if you are then you won't see a list of networks.
You clearly do have a problem, however before addressing that problem it would help if we could sort out whether you have an ethernet connection or not. -
Just upgraded to snow leopard, downloader apple support drivers for canon mp620. Why won't a printer list display in add printer window?
Assuming the MP620 is connected to your wireless network, then there are two components to this device - the printer and the scanner. The printer uses Canon proprietary software while the scanner is supported by Apple's Bonjour service. So in many cases, you will at least see the scanner, shown as Bonjour Scanner in the Kind column, while the printer can take longer to appear and is shown as canonijnetwork in the Kind column. If you cannot see either then you have a network issue. Try turning off the MP620 for a minute and then turning back on. Then see if the scanner / printer component appears in the Add Printer window. If you still don't see either, then confirm the MP and the Mac are using the same network. If you know the MP's IP address you can use Network Utility to Ping the address. You can also enable Bonjour Bookmarks in Safari preferences and when selected, the MP620 should appear.
-
why doesn't the "zoom in/out" feature by pinching the trackpad on my mac work anymore with firefox? It worked about a month ago, and still works on Safari.
Some gestures have been removed in Firefox 4 and later.
You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
browser.gesture.pinch.in -> <b>cmd_fullZoomReduce</b>
browser.gesture.pinch.in.shift -> <b>cmd_fullZoomReset</b>
browser.gesture.pinch.out -> <b>cmd_fullZoomEnlarge</b>
browser.gesture.pinch.out.shift -> <b>cmd_fullZoomReset</b>
browser.gesture.pinch.latched -> <b>false</b>
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br />
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu. -
I followed a procedure described in a book.
1. insert "Inventory.xml" file to a project "WpfXmlDataBinding" .
2. add the XML data source through the data panel of "blend for 2013", named it "InventoryXmlDataStore" and store it in the current document.
3. dragged and droppped the nodes from the Data panel onto the artboard.
Then I checked my Xaml file against the one provided by the book
Xaml file by the book:
<Window.Resources>
<!-- This part is missing in my xaml file --><XmlDataProvider x:Key="InventoryDataSource"
Source="\Inventory.xml"
d:IsDataSource="True"/>
<!-- This part is missing in my xaml file -->
<DataTemplate x:Key="ProductTemplate">
<StackPanel>
<TextBlock Text="{Binding XPath=@ProductID}"/>
<TextBlock Text="{Binding XPath=Cost}"/>
<TextBlock Text="{Binding XPath=Description}"/>
<CheckBox IsChecked="{Binding XPath=HotItem}"/>
<TextBlock Text="{Binding XPath=Name}"/>
</StackPanel>
</DataTemplate>
</Window.Resources>
<Grid>
<ListBox HorizontalAlignment="Left"
ItemTemplate="{DynamicResource ProductTemplate}"
ItemsSource="{Binding XPath=/Inventory/Product}"
Margin="89,65,0,77" Width="200"/>
</Grid>
my Xaml file:
<Window x:Class="WpfXmlDataBinding.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="MainWindow" Height="922" Width="874">
<Window.Resources>
<DataTemplate x:Key="ProductTemplate">
<StackPanel>
<TextBlock Text="{Binding XPath=@ProductID}"/>
<TextBlock Text="{Binding XPath=Cost}"/>
<TextBlock Text="{Binding XPath=Description}"/>
<CheckBox IsChecked="{Binding XPath=HotItem}"/>
<TextBlock Text="{Binding XPath=Name}"/>
</StackPanel>
</DataTemplate>
</Window.Resources>
<Grid DataContext="{Binding Source={StaticResource InventoryXmlDataStore}}">
<ListBox HorizontalAlignment="Left" Height="370"
ItemTemplate="{DynamicResource ProductTemplate}"
ItemsSource="{Binding XPath=/Inventory/Product}"
Margin="65,55,0,0" VerticalAlignment="Top" Width="270"/>
</Grid>
</Window>
All looks quite the same except the <XmlDataProvider ....> part under <Window.Resources>, which is gone completely in my Xaml file.
1, Why?
2, How many different ways to deal with xml data source through WPF?
Thanks, guys.
(ps My "WpfXmlDataBinding" runs without problem through.)Never do yourself down Richard.
Leave that to other people.
It's quite common for smart developers to think they're not as good as they are.
I coach a fair bit and it's a surprisingly common feeling.
And to repeat.
Never use anything ends .. provider. They're for trivial demo apps. Transform xml into objects and use them. Write it back as xml. Preferably, use a database.
You want to read a little mvvm theory first.
http://en.wikipedia.org/wiki/Model_View_ViewModel
Whatever you do, don't read Josh Smiths explanation. I used to recommend it but it confuses the heck out newbies. Leave that until later.
Laurent Bugnion did a great presentation at mix10. Unfortunately that doesn't seem to be working on the MS site, but I have a copy. Download and watch:
http://1drv.ms/1IYxl3z
I'm writing an article at the moment which is aimed at beginners.
http://social.technet.microsoft.com/wiki/contents/articles/30564.wpf-uneventful-mvvm.aspx
The sample is just a collection of techniques really.
I have a sample which involves no real data but is intended to illustrate some aspects of how viewmodels "do stuff" and how you use datatemplates to generate UI.
I can't remember if I recommended it previously to you:
https://gallery.technet.microsoft.com/WPF-Dialler-simulator-d782db17
And I have working samples which are aimed at illustrating line of business architecture. This is an incomplete step by step series but I think more than enough to chew on once you've done the previous stuff.
http://social.technet.microsoft.com/wiki/contents/articles/28209.wpf-entity-framework-mvvm-walk-through-1.aspx
The write up for step2 is work in progress.
https://gallery.technet.microsoft.com/WPF-Entity-Framework-MVVM-78cdc204
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML -
When ordering a movie how many megabites does each movie use in my internet downloads
when ordering a movie how many megabites does each movie use in my internet downloads
Peter Hillman wrote:
It doesn't really matter if an AppleTV2 has to re-download since using the same bandwidth twice doesn't effect the user. There are no data caps on home internet like there are on 3G cellular service.
Many home internet services do have caps, at least in the UK, and I suspect elsewhere to. My current service is capped at 100GB/month for downloads, though I rarely use that much.
I recall a post from someone a few months ago who said that during the course of watching/rewatching a single HD rental they'd used over 20GB of their monthly usage allocation which is a significant chunk if you do have a cap.
AC -
Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flash player. With the Reader, I was able to find a different installation link using the troubleshooting guide. I cannot find the same with flash player. Please tell me how to install Flash player because there is a website that I cannot even view without it. BTW That is annoying that I cannot even see the website without flash player
my system is XPUse these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Flash Player for Mac OS X
For Adobe Reader go to http://get.adobe.com/reader/enterprise/ -
I have Windows 7 Operating system and an HP 6500 A Plus printer. My iPad no longer prints wirelessly. An error message says the printer is offline. Suggestions?
1. Turn off router, printer and iPad
2. Turn on router and wait 30 seconds
3. Turn on printer and wait 30 seconds
4. Turn on iPad and test printing -
Dear
I try to create my Account ID....and i don't understand why i have to put payment? before my friend create Account ID don't have to put payment they still can create account ID... and now i buy iphone but i don't have credit card that mind i can't not do itHi,
This Link explains how to Set Up an Account ID... without a credit card...
http://support.apple.com/kb/HT2534
Hope it helps,
Cheers, -
Do I have to alert adobe if I'm moving my product from one computer to another? or will they recognise my intentions when my product is removed from their database?
Is there a way to export my movie timeline (as in the organisation of my
clips, not just the movie) to a external hard drive. I thought publish
would help but I'm unsure and the export button under file doesn't light
up. I'm using Elements 11 and I'm trying to save it to a hard drive so I
can unistall the program, upgrade my operating system and reinstall.
Message was edited by: Christopher Hewett
On Tue, Dec 30, 2014 at 12:14 PM, Barbara B. <[email protected]> -
hi,i was about to update my software version of i phone 4,but suddnley power went off.now my phone is not recognised ,and my phone doesn't work,how to reinstall operating system,please help me.....
Put the device in DFU mode: http://www.iclarified.com/entry/index.php?enid=1034
-
Why have the channel shortcuts changed in CS4? Cyan used to be "cntrl+1" and now it's "cntrl+3" for
Why have the channel shortcuts changed in CS4? Cyan used to be "cntrl+1" and now it's "cntrl+3" for example. Why?
http://blogs.adobe.com/jnack/2008/10/shortcut_changes_in_pscs4.html
Note there's a link to a plug-in in the article that remaps the keys to the old behavior. -
Why am I suddenly getting the following error message: "The specified location is reserved by the operating system and is not permitted. Please choose a different location." I've been recording all night and I haven't changed any of the parameters.
Hi Tom,
Looks like we have problem here as we see another blank post from you here. It's probably something to do with your email. Let me send you a PM with my email address and we can communicate that way.
Thanks,
Kevin -
My ical is not populating after i reinstalled my operating system - my Outlook 2011 is ok but I now want to sink my iphone 4 with my outlook and i presume i need ical to be populated for this
Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Maybe you are looking for
-
Multiple Value in additional fields using SAP Query
HI All, I have a question related additional field in SAP Query. I tried to create report about PR and PO using SAP Query. Since one PR can be converted to multiple PO, I decided to create additional field po_1 to display the value of PO that related
-
How do I syncronize a PDA with PC? (activesync/web service?)
Hi! Short intro: I’m currently working in a project with the goal to create a program where a user is collecting data in the field with a PDA. When the user has returned to his office, the stored data in the PDA is to be added to a central database w
-
Which table stores page id and name?
Hi, When we navigate through the portal pages, each page url will contain a unique id to identify itself: for example "page?_pageid=33,1,33_32417". Based on the page id parameter, from which database table can I retrieve the corresponding page name?
-
Comment écrire en colonne dans un Write to spreadsheet
Bonjour, J'ai plusieurs données à récupérer, mais mon problème n'est pas dans l'écriture du fichier mais plutôt les écrire en colonne dans le fichier. J'ai deux boucles imbriquées, une qui va prendre les données et les écrire dans un fichier , et l
-
Autoinvoice failed: Please define all periods in which revenue is to be rec
Dear All, Is there anyone encounter such error when executing Autoinvocing? Errors: 1) Please define all periods in which revenue is to be recognized or credited. Note that revenue cannot be recognized or credited in closed and close pending periods.