Why doesn't Illustrator recognize all of my hard disks when I go to select a scratch disk?

I have four dard drives installed on my Mac Pro. One is the 640 GB drive that came with it, one is a 500 GB drive and there are also two 1.5 TB drives. However, when I go to select the Scratch Disk in Illustrator CS5 it only lists the Start-up disk and Time Machine as my Scratch Disk options. What gives? Photoshop shows all of the hard drive options for Scratch disks.

You've posted in the scripting forum… You will have an audience of <= 5 here…

Similar Messages

  • Why doesn't Apple include all iTunes extras with bundle purchases?

    I have noticed this before but now I am wondering: Why doesn't Apple include all iTunes extras with bundle purchases?
    I am currently looking at the Buddy Comedy Pack.  On this page they say that the following movies have iTunes Extras:
    21 Jump Street, 22 Jump Street, and Step Brothers. 
    As you scroll down the page it says that if you purchase this bundle, you also receive:
    iTunes Extras for: 21 Jump Street, Step Brothers, and The Other Guys
    A) Why not include 22 Jump Street's extras with this bundle?
    B) The Other Guy's does not have an iTunes extra unless bought through this bundle! (What the heck?!)
    Thanks for your help!

    Future,
         This is a user to user forum. We help other each other if we have problems. We do not work for Apple. If you would like to put a suggestion in or a complaint, use the link on the right hand corner of this page to contact Apple. Good Luck!
    Tommy

  • Why doesn't the "Command Number" keyboard shortcut apply the colored label to the selected image?

    Why doesn't the "Command Number" keyboard shortcut apply the colored label to the selected image?  The similar keyboard shortcut to assign stars works, but the shortcut to assign a label color doesn't?

    Just to be sure they haven;t been reassigned in your Aperture go to Aperture->Commands->Customize then in the search box in the upper right hand corner enter color.
    You should see the keyboard shortcuts and the corresponding add label commands.
    If they are set then quit Aperture move you preference file to the desktop and restart Aperture. The instructions for moving the preference file can be found at Aperture 3: Troubleshooting Basics
    Post back the results
    Message was edited by: Frank Caggiano - Added preference file move

  • HT1373 why doesn't the mini ipad image appear in itunes when syncing

    why doesn't the mini ipad image appear in itunes when syncing ?

    It doesnt along with the Ipad 4th gen. I wouldnt worry about it, most likely it will when the new Itunes comes out.

  • Why doesn't the iPad pick up my camera videos when it syncs with my computer?

    Why doesn't my iPad pick up my camera videos when syncing with my PC?

    Some people have fixed this with a simple re-start of the phone, others needed to reset the Phone.
    Regards
    TD

  • Why doesn't mini iPad have such a hard time keeping and getting a wireless signal?

    Why doesn't mini iPad have such a hard time keeping and getting a wireless signal? It's model PD531LL/A  Version 6.1.3

    Hi there,
    You may find the troubleshooting steps found in the article below helpful.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    -Griff W.

  • My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not workin

    My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not working. I have two older imacs and a wii that connect to the router. Any thoughts? Thanks

    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Setting>:General>Reset>Reset Network Settings.
    - iOS: Troubleshooting Wi-Fi networks and connections

  • Why doesn't ITunes show all my music in my computer?

    I have 11,482 music files in my computer for a total of 37.1 GB. When I bring up my music list in ITunes, it shows 1197 songs and 5.27 GB. Why is ITunes not showing all of my music? In instructions, it says I can drag my music into the list, this could take forever?

    I've been having the same problem since the upgrade to 10.4. Most of what I try to add to my Music Library is simply not showing up. These files are not corrupted, they're the same files I had on the last version of iTunes. I'm simply trying to reorganize all my music, so I started over, but this update has ruined my efforts.

  • HT1947 Why can't I see all songs for an artist when using iPad remote for home sharing music through apple tv.

    Why can't I see all my songs for an artist when I search by artist using iPad remote? I'm listening to music via home sharing through apple tv using iPad 2 as my remote. All my songs seem to be listed fine under "songs", but when I select "artist" many of the songs I have for that artist are not there, any idea why that is or how I can fix this.....I suspect it's because many songs may not be associated with an album and it seems only songs in albums are displayed when I search by artist.

    Thanks Ferretbite, but that's not the issue in my case, the songs are not part of a compilation. I just checked several of them and the "Part of a compilation" box is unchecked.....it seems as if the song does not have an album associated with it, it will not display under the artist when I search by artist on the iPad remote which REALLY stinks.
    Hope someone else might have a solution.

  • Why  doesn't my ipod advance to the next song when i'm listening to it.

    why doesn't my ipod nano, 6th generation advance to the next song while playing.  i have to manually advance it to hear the next song. .This is a nex nano, 6th gen that apple just sent me  because of possible battery issues in the nano, 1st gen.

    Hi lauraleeu,
    Thanks for visiting Apple Support Communities.
    If your iPod nano isn't advancing to the next track, this article is a good starting point for troubleshooting:
    How to reset iPod
    http://support.apple.com/kb/HT1320
    Best Regards,
    Jeremy

  • Why does the Mail app (among other apps) go bananas when you try to select multiple emails to delete for instance?

    I have an iPhone 4S and it's as if the function to select mulitple emails is still there in iOS 7, but it's not possible to execute it. When I try to select several emails it often automatically deselects some or all of the emails almost instantaneously. After a while, you are able to select all email that you want to delete fast enough and then press delete. Very strange. This worked so much better in the previous iOS, what has happened and how do I solve it? It's like the touch screen is totally inaccurate.
    Best regards,
    Staffan

    roaminggnome wrote:
    When your tantrum has run its course, please restate in an actual question as opposed to a rant.
    Wasn't there a "select all" button in iOS at one time ? Where did it go ?!?

  • Why doesn't Adobe recognize my password on my iPad?

         Unfortunately my iPad2 went for a swim the other day and drowned----serious user error.  Fortunately the user (me) had backed up the iPad on a regular basis so all data, aps and setting were recovered.  The only serious glitch occured when I tried to open my books downloaded from the library using OverDrive. ADOBE popped up and asked me to enter my ID and Password.  When I did, Adobe did not recognize me, declared all of my books as "Invalid Titles" and directed my to 'verify your ADOBE ID and try again.'  I tapped the OK but then nothing else happened. 
         Where do I go to verify?  I checked in settings but couldn't find anything that looked helpful.
         Please help.....my check out itme for book 5 of Dance of Dragons expired before I could finish.  . . .sooo sad. I read lots of books from the library this way and right now I am completely locked out.

    I'm wondering if you did the Overdrive update that was just released before your iPad got wet? I think there may have been issues with the update and Adobe Authorization as I had the same problem. But I was getting an Adobe Authorization Error 256 message every time I tried to authorize and it was not working for 3 days. I did delete Overdrive from my iPad ( not recommended unless you have to) then reinstalled, then I synced my iPad to my computer. Still couldn't get it to authorize.
    This is what I did and was able to get it working...
    In settings at the top it should say Adobe Authorization, click authorize it should ask for your ID and password click authorize may take a minute, if that doesn't work I did the following.
    In settings I turned off Auto play, Cellular download, automatic downloads and auto check messages. I then tapped clear deleted titles even though there weren't any, then I tapped check for messages.clicked ok when it said there were none. Then clicked Authorize, tried two times with everything off then when it didn't work I turned on all the settings I had turned off ,did the Authorization again and it worked. I was able to download the books from the library directly from my iPad.
    I hope this helps, I know how frustrated I was when I couldn't get it to work!
    Cheryl

  • Why Doesn't Illustrator do "Convert to Profile?"

    In Photoshop, I can do all my work in Adobe RGB and then use "convert to profile" to create the final output file depending on how it will be used (sRGB, CMYK Sheetfed Coated, CMYK SWOP Uncoated etc.)
    But in Illustrator there is no "convert to profile" -- and "assign profile" doesn't do the same thing.
    I use Illustrator to create graphics for both web and print projects... so how do I work in Adobe RGB (to take advantage of the wider gamut) but still output proper colour profile files -- without having to go and change the colour settings every time I go from a print project to a web project?
    Leif

    Well, File>Document Colour Mode only converts to the working CMYK or the working RGB colour space -- so it's not quite what I'm after...
    But maybe I should just make my default RGB space to be sRGB. That would simplify my web graphics workflow, and I could still easily go to CMYK when I output for print. It seems like the convenience of working in sRGB outweighs the benefit of the wider gamut of Adobe RGB.
    What do you guys think? Are there any practical, real-world downsides to using sRGB for all my RGB design work? (we're not talking about fine art photography)
    What default working spaces do you guys use? How do you deal with going back and forth between web projects and print projects?

  • Why doesn't Logic recognize my loop as an Apple Loop

    I have challenges with getting LPX to recognize my wav > aiff file as a bona fide apple loop that I can then stretch tempos.
    I have a drum brushes loop that I exported in WIN7/Audition, saved as wav and moved over the my mac. Then I dragged it into LPX, found the correct exact tempo manually (60bpm) in order to make an Apple Loop. Couldn't do it with the wav so saved it as an aiff from within LPX. LPX sees the "tempo information" (not really) and then was able to drag into Apple Loops browser, still, didn't create the tempo meta data or whatever it does to allow me to stretch it. I drag the re-indexed loop on an audio track and it's juts the same 60 bpm loop. Changing my global tempo does not alter the tempo of the loop.
    Appreciate any help it getting another 10 bpm outta this thing for a project. Took forever to find a decent ballad drum with brushes!
    thanks

    OK that works insofar as it saves the file with no issues and I can drag into the track area (does say there is time data to import- "YES") but it doesn't change with global tempo changes.
    Also maybe there is a problem with the index? I deleted the other attempts from User Loops >SingleFiles folder but LPX still is searching for the file at every index.
    So two problems now:
    index still looks for older files
    ALU is saving but LPX not changing tempo of Apple Loop
    I read the manual re: file type.
    The File Type tag determines if an application treats a file as a looping or non-looping file. Looping files are matched to the project tempo and key— if the Key tag is set to a value other than None. Non-looping files are not matched to the project tempo or key. (Untagged files added to a project are treated as non-looping.)
    When I choose "Looping" in ALU, it changes the sound drastically which although would give tempo stretch, is probably ties to it thinking it's 120 bpm (and not 60)?
    Yet it was recorded at 60 bpm.
    The catch-22 is that the ALU can't recognize my tempo and if I change it (via choosing "looping", the only way to correct the beats btw) it messes with the sound because it's twice as fast.
    Otherwise, as a non-loop, I'm stuck with only 60 bpm (even though it has "time data" to import)

  • Why doesn't ical add all of my google calendars on the same page?

    why doesnt ical add all of my google calendars on the same page.
    like in gmail, i have different calendars that all show up together on the same page.
    i see that they are there in ical when i click window. but the are not all see together on one page.

    If the box next to each calendar in the list is checked, it should show the contents of the calendars on the page. Unchecking the box hides the calendar.

Maybe you are looking for