Why doesn't it start?
If I close my iBook, the glowing light stays on. But then when I open the iBook, the whole thing goes dead. I then have to hold the button down for a few seconds twice to get it to restart. What is wrong? If this helps, recently the battery went dead and I replaced it.
Hi Dolfan650,
Welcome to Apple Discussions
Try Reseting the Power Management Unit (PMU). The Power Manager's settings over time get messed up. Hopefully it should fix your problem. The other safe thing to do is to bring it to your local Apple Store and have a Mac Genius take a look at it.
I hope that helps,
Jon
Similar Messages
-
NFS: Why Doesn't nfsd Start Automatically?
This on a 2009 MacMini running 10.6.8
Bleach:~ mnewman$ showmount -e
Cannot MNT RPC: RPC: Port mapper failure - RPC: Timed out
can't connect socket for RPC
Bleach:~ mnewman$ ps -ax | grep nfsd
594 ttys000 0:00.00 grep nfsd
Bleach:~ mnewman$ sudo nfsd enable
Password:
The nfsd service is already enabled.
Bleach:~ mnewman$ showmount -e
Exports list on localhost:
/Volumes/Media Everyone
And, why do I have to run restart twice?
Bleach:~ mnewman$ sudo nfsd restart
Bleach:~ mnewman$ ps -ax | grep nfsd
Bleach:~ mnewman$ sudo nfsd restart
The nfsd service does not appear to be running.
Starting the nfsd service
Bleach:~ mnewman$ ps -ax | grep nfsd
631 ?? 0:00.01 /sbin/nfsd -N
634 ttys000 0:00.00 grep nfsdWell, it's not that run() doesn't get invoked -- it's that it's not getting invoked in the order you expect, right?
I would think that this comes down to thread scheduling -- just because you create a thread and start it, it doesn't mean (I believe) that the thread's run() method is invoked either necessarily before or necessarily after the caller's Thread.start invocation returns. I believe that calling start() just tells the JVM to schedule the thread, and it decides when to actually do so.
To fix your code, I'd suggest fixing it so that there are no dependencies on run() being invoked before or after Applet.start() returns.
First of all, I'd suggest that not set isRunning after you call Thread.start(). Set isRunning to true before that. Or use some other way of tracking whether the thread should be running.
Secondly, I'd suggest that you stop catching Exceptions silently... -
Why doesn't FF5 start with previous tabs & pinned tabs, & no Save or Quit at shudown.
First up, the Feedback form wouldn't submit, so my gripes are included here. Perhaps more word allowance is needed for complex issues? Or the form simply has a glitch in it.
Using FF5. At shutdown last night FF did not ask if I wanted to save the pages I had open. In internet options (from 3.6 installation till now I have check-marked that FF open with tabs & windows from last time (session). Day before yesterday it loaded the previous session tabs just fine, but this morning it loads w/o the 4 or so tabs & 3 pinn'd tabs at quitting time, only iGoogle (the designated homepage) which wasn't open at shutdown time. In fact, I think it hasn't asked if I want to quit or save consistently since upgrading to FF5 a few days ago.
Bottom line IF by default I request FF to open with tabs & windows from last time, why at shutdown is it asking if I want save and quit. As I see it, open pages ARE tabs and should be automatically reloaded at start time. ANDDDD that should include the pinned tabs. Otherwise, the pages may as well be bookmarked.
Oh, one more problem: I created two toolbars but where are they? They don't appear nor are they acknowledged on the toolbar menu.
Thank you for any comments and advice.
BTW, love the Pinned Tabs but miss my Google Bookmark toolbar, however, I got around it by pinning the bookmark page. Now, if you could just get those pin-tabs to reload consistently. Wink, wink . . .1) Firefox5.0 has a built-in option to Restore Previous Session.
go to History Menu -> at the bottom you will see RESTORE PREVIOUS SESSION option.
2) If you want Firefox to startup with tabs & windows from opened last time.
go Tools Menu -> Options -> General -> Startup section -> select '''''When Firefox start: Show my Windows and Tabs from Last Time''''' -> Click OK.
3) go to View Menu -> Toolbar -> Customize -> see if your toolbars appear here. If not then they were probably incompatible with Firefox 5.0
Check and see if things workout fine. -
After restarting the iMac (OS 10.8) the dashboard won't display any info in any of the widgets. I tried kickstarting but nothing changed.
Not sure what is meant by kickstart?
Is this a new installation of 10.8?
Did you restart your computer?
Could be a corrupt plist try deleting the
com.apple.dashboard.plist
open Finder>Go>Go to Folder copy and paste:
~/Library/Preferences/com.apple.dashboard.plist
delete or move this file to the desktop.
restart or in terminal copy and paste:
killall Dock
The plist will automatically rebuild. You can delete the desktop plist or return if no change. -
i have an ipod touch 8gb model number MA623LL. How do I install apps on my ipod? Is it capable of transferring/running apps? Why doesn't my ipod touch have the basic-beginning app on the beginning screen after i erased/wiped my ipod and started new?
Googling shows that you have the 1G iPod. For apps you need at least iOS 2. The iG can go as far os 3.1.3 that you get here:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
Just be aware that there are presently not that many apps that work with a 1G with iOS 3.1.3 -
Why doesn't my TestStand deployment installation show up under my Windows start menu of my target machine?
I have successfully installed working deployments to target machines. However, I was expecting to see the installation listed as "My TestStand System A" in my start menu, but it is not. Am I misunderstanding something here?
Also, if I peform a different second deployment to the target station like "My TestStand System B", all of the LabVIEW files from my previous installation for "My TestStand System A" disappear from the target directory (c:\Program Files\My TestStand System A).
I am using TestStand 4.2.1 Professional on the development station with Windows XP and LabVIEW 2009.
Solved!
Go to Solution.Thanks Paul,
That solved my second problem and inspired me to search deeper for the answer to my first problem. The answer is in the "Distributed Files" tab, "installer properties", "Create a Program Item" checkbox:
Wouldn't it be nice if this was automatically checked by default for the main sequence files? Wouldn't it also be nice if "Upgrade Code" was automatically regenerated by default whenever we saved the *.tsd file under a different name?
Thanks again,
Eugene
Message Edited by Eugene12 on 05-06-2010 04:27 PM -
Why doesn't Personal.xlsb start when opening a different SS
I have my personal.xlsb installed in the following folder;
C:\Users\Toni Chaffin\AppData\Roaming\Microsoft\Excel\XLSTART
Why when I open a already completed WorkBook, say stats.xlsm why doesn't my personal workbook open so I can run macros that I have saved in there
Thanks
Toni Chaffin aka TalisaI am experiencing the same exact issue. Running Office 2010 and whenever I open an xlsm file by double clicking on it in Windows Explorer, it opens in Excel but the macros do not open. If I open the VBA editor, only the current document is shown in there
and not the macros.
Opening Excel first and then dragging the spreadsheet file from Windows Explorer into Excel does work, and while the answers here are workarounds, they are far from solutions and are a very cumbersome workaround when dealing with multiple files.
Can anyone help with a proper solution to the issue? I've tried adding my XLSTART folder to the "At startup, open all files in:" setting in the Advanced options menu, and that has done nothing.
Thanks,
Mike -
Why doesn't trial Elements 13 start?
Downloaded trial Elements 13 in folder on PC desktop, but it doesn't automatically start. 1.6GB .7Z file is not recognized. What should I do?
The first method on Adobe's website didn't work; tried it twice. But the second method worked.
-
Maintaining Macs--Why doesn't Apple tell you more?
This is not a problem that I need to solve but just something I've been wondering about. Why doesn't Apple tell people the routines they need to use to maintain their Macs?
If you do a search on "maintenance" in Support the fourth item is Mac Maintenance Quick Assist:
http://docs.info.apple.com/article.html?artnum=303602
The things they tell you to do are:
1) Keep Things Up to Date; 2) Put Your Files Away; 3) Name Your Files; 4) Prune Through Your Files; 5) Back Up Your Files; 6) Check for Viruses; 7) Clean the Outside
Where is anything about running the maintenance scripts, checking permissions, checking your preferences, updating the databases, cleaning caches, or anything else that software programs like Onyx, Cocktail, etc make their purpose? Why don't they mention getting a program like Disc Warrior and running it periodically?
The first item on their list is Keep Things Up to Date, meaning download system and application updates. Well after looking at these forums for a while I would have to say that is the worst thing you could do, as so many posts start, " Help! I updated my software and now things don't work...." Even if you look at this article about updating your software...
http://docs.info.apple.com/article.html?artnum=106704
...nowhere does it mention repairing your permissions! Yet everywhere on this forum that is mentioned as one of the first things to do...unfortunately AFTER people are crazy with problems.
I don't get it. Even in the manuals that come with the computers none of this stuff is mentioned (last time I looked) except in the troubleshooting section. Would you buy a car where the owner's manual had "change the oil regularly" listed in a section on what to do after you've blown your engine?
Granted, a lot of people on this forum know all these things and do them regularly, but I have several friends with Macs who never do any regular maintenance because they've never been told to. One just called me last week because his iMac auto-updated and he had all sorts of problems.
So why is this? Why isn't basic Mac maintenance explained to people better? Going back to the car analogy, people have been taught they have to give their cars tune-ups or face an eventual breakdown. Why not with Macs?
I have been using Macs for years and enjoy looking into this geeky stuff. And I rarely have any serious problems. I would think it has a lot to do with the fact that I don't automatically update without checking MacFixit first and seeing what problems people are having and running a few simple maintenance routines periodically, plus backing up for good measure. Why isn't Apple more upfront with people about maintaining their Macs? Am I off-base here?
ibook G3, imac G5 Mac OS X (10.4.9)I'll provide you with several references you will find interesting reading:
http://www.macfixit.com/article.php?story=20060413075624652
http://www.macworld.com/2006/08/secrets/repairpermissions/index.php
http://www.macworld.com/2006/03/secrets/tcopermissions/index.php
http://www.atomicbird.com/node/view/29
The document to which you referred is an old one that dates back a ways when permissions repairs were often still needed because many installers improperly changed permissions or caused permissions to change through other improper operations. In reality the only thing permissions repair affects are the permissions on OS X installed software for which there are receipts in the /Library/Receipts/ folder and third-party software that install a receipt that includes information on resetting permissions for that software. The vast majority of third-party applications provide no such information and repairing permissions has no impact on them.
As for maintenance scripts they are now supposed to be run automatically regardless of whether the computer is turned on in the early AM, but this is an implementation with Tiger because Tiger introduced a new method of task launching. It's not 100 percent effective but it's better than it was. However, it's an easy problem to solve because there are some excellent utilities that solve the problem: Macaroni, Anacron, and Pseudo Anacron - VersionTracker or MacUpdate. I use Macaroni on all my Macs.
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.2 is Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com.
I know that Joe Average has no clue, but it's not Apple's responsibility to provide Joe Average with clues on how to use a computer. No more than it's not GM's responsibility to teach you how be an automotive mechanic or how to drive. Some things you have to take responsibility for yourself. It's just that Joe Average is too lazy to read the User Guide, buy a book, or in any other way learn about computers before buying one.
As you can tell I am somewhat heavy handed about personal responsibility. Computers are essentially toys that aren't dangerous, but the person playing with them is. What really scares the crap out of me is that same Joe Average has a driver's license and may be old enough to drink liquor. When it comes to driving or drinking and driving Joe Average is no more competent. -
Why doesn't version 17.0.0.169 show up in IE11 8.1 64-bit Manage Add-Ons?
KB3044132 shows as installed for Flash Player update, and the Control Panel Flash Player icon for 32-bit shows 17.0.0.169 installed (I have 64-bit and 32-bit), but the Manage Add-Ons for Shockwave is Enabled and showing version 17.0.0.134! When I check the version using Adobe it only shows 17.0.0 and not the important part, so I cannot tell if Adobe detects 17.0.0.169 or 17.0.0.134! I think I need to know if IE11 64-bit has 17.0.0.169 also. Please advise because Microsoft technical support says to contact Adobe about this. Please delete my entry in Adobe general forums, Bridge general discussion as michaelh94875078. I did not see Flash Player on the list of communities provided during my first post.
It occurs to me that maybe Microsoft will not allow their 17.0.0.169 KBitem to go out until their next update on the second Tuesday of May for their convenience and reputation! I want any update for Flash Player to be installed immediately for security. That is why I tend to use Firefox with NoScript and Web of Trust when I use a Google search. I will be watching the next Microsoft update to note if the KBitem it said was not appropriate for my computer - goes in!
Sent from Yahoo Mail on Android
From:"m_vargas" <[email protected]>
Date:Wed, Apr 22, 2015 at 4:15 PM
Subject:[Using Flash Player] Why doesn't version 17.0.0.169 show up in IE11 8.1 64-bit Manage Add-Ons?
Why doesn't version 17.0.0.169 show up in IE11 8.1 64-bit Manage Add-Ons?
created by m_vargas in Using Flash Player - View the full discussion
Hi michaelh94875078,
I'm sorry, I misread your previous post and thought it had been installed. From my experience with Microsoft Updates is that some times they depend on some update being installed. I'll run Windows Updates and install all updates, then run Windows Updates again after all updates finish installing. Sometimes it finds new updates that weren't there before, and sometimes it doesn't. You can try that route, or download the Microsoft update posted at the bottom of the Flash Player Issues | Windows 8 page. Download the one that corresponds with your OS version. You may want to bookmark this tech note for future reference in case Microsoft Updates fails to detect the update is available for your system.
Maria
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7467865#7467865 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7467865#7467865
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Using Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Why doesn't the iPad have a guest screen like the PC for extra security?
I just want to start off first by saying I just purchased my iPad about six months ago and I'm really enjoying it,but if you're like me,I believe in protecting my privacy.
I don't like to turn down any of friends or coworkers when I'm asked to use my iPad,but when you have such things as your personal pictures,movies,music,business documents,etc...you'd like to keep them from prying eyes. I thought that with the new iOS 7 update,that issue would've been fixed, but I was wrong. I'm hoping Apple would correct this problem with the next iOS update,it would make a lot of loyal Apple consumers & anyone who's new to purchasing the iPad for the first time very happy to know that feature is available.
Why doesn't the iPad offer a guest screen?Tell Apple at the link below.
http://www.apple.com/feedback/ipad.html -
I've just started to use Adobe Digital Editions, due to a library book in electronic form. I just wonder how on earth I can get the book to open at the page I was last on, when I restart the program. I watched the program open today, ans saw it actually does, but only for 3 seconds, then goes back to show the book cover. The bookmarks are no help, as they only appear to be used for putting down notes. I did try to use a bookmark to write down the page I was on, but there was no bookmark to open next time. Of course I've also tried the save-button.
Why doesn't the program work just like Acrobat Reader, and open on the page where you last were?
I have Mac OS X version 10.4.11
Would be very pleased for some helpThanks, I did try, but I couldn't choose the document,as it was in grey letters. When I opened the library, however, there were as many pictures of the cover as times I had opened the book, so in some way it looked as if it had left its mark there.
Make sure you have added the book to the ADE library. ADE does not remember
bookmarks
for any books not added to the library -
Why are the threads start and terminate randomly?
Hi there,
I got the program below. I am wondering why are the threads start and terminate randomly? Everytime, I run the program, it produces different results.
I know that these four threads have got same normal priority (should be 5), and under windows there is something called timeslice. Then these four threads rotate using this timeslice. How do we know what exactly the timeslice is in seconds? If the timeslice is fix, then why the results are ramdom?
Thanks in advance!
* To change this template, choose Tools | Templates
* and open the template in the editor.
package mythreadone;
* @author Administrator
public class MyThreadOne implements Runnable {
String tName;
Thread t;
MyThreadOne(String threadName) {
tName = threadName;
t = new Thread(this, tName);
t.start();
public void run() {
try {
System.out.println("Thread: " + tName);
Thread.sleep(2000);
} catch (InterruptedException e) {
System.out.println("Exception: Thread "
+ tName + " interrupted");
System.out.println("Terminating thread: " + tName);
public static void main(String args[]) {
// Why are the threads start and terminate randomly?
new MyThreadOne("1");
new MyThreadOne("2");
new MyThreadOne("3");
new MyThreadOne("4");
try {
Thread.sleep(10000);
// Thread.sleep(2000);
} catch (InterruptedException e) {
System.out.println(
"Exception: Thread main interrupted.");
System.out.println(
"Terminating thread: main thread.");
1. Firstly, I set in the main function:
Thread.sleep(10000);
and I run the program it gives:
Thread: 1
Thread: 4
Thread: 2
Thread: 3
Terminating thread: 1
Terminating thread: 3
Terminating thread: 4
Terminating thread: 2
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 10 seconds)
Run it again, it gives:
Thread: 2
Thread: 4
Thread: 3
Thread: 1
Terminating thread: 2
Terminating thread: 1
Terminating thread: 3
Terminating thread: 4
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 10 seconds)
And my question was why it outputs like this? It suppose to be:
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 1
Terminating thread: 2
Terminating thread: 3
Terminating thread: 4
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 10 seconds)
Why these four threads start and finish randomly each time I run the program? I use Windows, suppose there is a timeslice (i.e. 1 second), these threads have the same priority. Then the threads should start and finish in turn one by one. Am I right?
2. My second question is:
When I change the codes in the 'main' function into:
Thread.sleep(10000); -> Thread.sleep(2000);
it gives me the results like:
Thread: 1
Thread: 4
Thread: 3
Thread: 2
Terminating thread: main thread.
Terminating thread: 1
Terminating thread: 4
Terminating thread: 3
Terminating thread: 2
BUILD SUCCESSFUL (total time: 2 seconds)
Run it again:
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 3
Terminating thread: main thread.
Terminating thread: 4
Terminating thread: 2
Terminating thread: 1
BUILD SUCCESSFUL (total time: 2 seconds)
I tried several times. The main thread always terminates before or after the first child thread finished.
My question is why it doesn't output something like:
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 3
Terminating thread: 4
Terminating thread: 2
Terminating thread: main thread.
Terminating thread: 1
BUILD SUCCESSFUL (total time: 2 seconds)
or
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 3
Terminating thread: 4
Terminating thread: 2
Terminating thread: 1
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 2 seconds)user13476736 wrote:
Yes, my machine has multi-core. Then you mean that if I got a one core machine the result should always be:
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 1
Terminating thread: 2
Terminating thread: 3
Terminating thread: 4
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 10 seconds)
???No.
>
How to explain my second quesiton then? Why the main thread always terminates before some of the child threads end? Thanks a lot. -
Why doesn't my ipod advance to the next song when i'm listening to it.
why doesn't my ipod nano, 6th generation advance to the next song while playing. i have to manually advance it to hear the next song. .This is a nex nano, 6th gen that apple just sent me because of possible battery issues in the nano, 1st gen.
Hi lauraleeu,
Thanks for visiting Apple Support Communities.
If your iPod nano isn't advancing to the next track, this article is a good starting point for troubleshooting:
How to reset iPod
http://support.apple.com/kb/HT1320
Best Regards,
Jeremy -
Why rmiregistry & Server must start in the same directory.
I have 2 servers & one rmiregisty for both. I want to start this servers separetely from different directories.
But if I try to start server from the directory other than where I've already started rmiregistry the server doesn't bind.
Please, can anyone explain why rmiregisty & server must start from the same directory?Are you sure the classpath when rmiregistry is started includes jar/directories where rmiregistry can find your server stubs ???
rmiregistry does not need your implementation, but it needs your stubs to be able to register your server objects ...
Maybe you are looking for
-
IDES ECC6.0 including EHP4 on 32 bit machine
MARKUS, I am installing IDES ECC6.0 including EHP4 on 32 bit machine.. I came to know from the following ( Note 1379040 - IDES ERP 6.0 ECC 6.0 incl. EHP4) that i cannot install IDES ECC6.00 on 32 bit,but i can install via system copy method.. I follo
-
BT Home Hub 3 is **bleep** !!!!!!!!!!!!!!!!!
Okay so its know secret that BT send out HH3 that are **bleep** and can't do the job of talktalk modem/routers so i asked if i could have a Home Hub 2 send out to me because i need to run a server and HH3 will not or can not do "loopback" so they are
-
I have a an iMac 11,2 is there anyway I can stream what's on my computer screen to my HD TV? I have apple TV2 also.
-
Unable to Create End User in Apex 4.0.2
I want an End User to use an application without seeing Development links at the bottom (like 'Edit page x' or 'Session' or 'Debug'). I go to the Administration tab, click 'Manage Users and Groups', and click Create User. In the Account Priveleges se
-
How to create PDF from Publisher A3 landscape file
I have a poster in an A3 landscape Publisher file, two pages. When I created a PDF it came out as portrait, and only the left half of each page. What can I do? I need to take it to be printed, as I don't have an A3 printer, and the office shop wan