Why doesn't Match upgrade these AAC/MPEG tracks?

I still fail to understand Match. It's supposedly completed its process, but I have a smart playlist displaying over 1000 tracks that do NOT appear upgradable to the unprotected 256k format. None has the iCloud Download icon, though they all meet these criteria:
1. iCloud status = either Purchased or Matched
2. Bitrate = 128 – 240kbps (well above the 96k minimum, well below 256)
3. Kind = AAC or Protected AAC or MPEG (m4a, m4p, mp3)
Why do these not offer the Download icon? What am I missing?
Thanks,
Chuck

You have to delete the original song from your iTunes library (and computer) before the download icon will be offered. However, is a song is classified as "purchased" you will simply be downloading the same track that was just deleted. Only "matched" songs are "upgraded."
Before deleting any files from your computer be sure your backup is current.

Similar Messages

Why doesn't Adobe upgrade CS6 Encoder

Why doesn't Adobe upgrade CS6 Encoder and only CC Encoder?

Hi rbnbrl,
I would just like to reconfirm the eligibilities of purchansing CC at special offer price :
The serial number which qualifies for special offer for CC has to be :
1.CS3 & above
2. Retail product (purchased for personal usage,with only two installs permitted)
3.It can not be an Adobe product obtained as a bundle pack with purchase of any Electronic Item(e.g computer/printer/camera etc.)
4.It can not be any purchase under Educational licenses
5.It can not be any Volume License product(it is registered in www.licensing.adobe.com)
Note:An OEM(Section 3) serial number, Educational serial number, few Volume licensing Serial number prior to CS6 can be registered in Adobe.com, they still do not qualify for special price offer.
Please check :
There is a hyperlink of "Terms" in the purchasing in :
https://creative.adobe.com/plans?plan=individual&store_code=us
It states that (http://www.adobe.com/store/en_us/popup/offer/ccm_complete_offer.html)
Regards,
Rajshree

Why doesn't my iTunes Library list any track info. for the CDs I burn?

I've bought a new PC and after setting up iTunes i began to copy my CD library back into my new iTunes library on my new computer.
But when I copy a CD now the only album information that copies is "track 1" "track 2" "track 3" etc. No song titles, no artist names, no album names. No album covers. All of this information was automatically copied from the same CDs on my old computer with a slightly older version of iTunes.
What's wrong? How can I fix this?

Are you reimporting the CDs themselves or are you copying over the files from the old computer? I assume the latter.
If you are copying over the old files from the old computer, what format where they imported as? My guess is that you used AIFF or WAV files? If so, that is the problem. WAV and AIFF files can not store info like artist, track title, etc. like you can with MP3 and AAC files. Instead the iTunes database file (the .itl file on a Windows machine) keeps track of that stuff. If you move the WAV or AIFF files, that information is lost/disconnected.
Try this and see if it works. Pick all the tracks from an album and then use the Get Track Info command. Since they were originally imported by iTunes, it may work and fetch the proper information.
Patrick

Why doesn't Quicktime Support MPEG-2 with AC3 sound?

Last summer I bought a Mac Mini so I could use iMovie and iDVD to convert and edit my 20 year old VHS tapes of family events to DVDs. This Christmas I got a Samsung DVD Recorer-VCR unit that easily copies VHS to DVD in MPEG-2 format with AC3 sound.
So, I'm all set to use my Mac Mini and begin my family archives project - or so I thouhgt. I found that Quicktime and iMovie don't read MPEG-2!! Then I was relieved to find that there is a plug-in that works with Quicktime Pro that will read MPEG-2. I spent the $50 to download these 2 programs and sure enough Quikcktime Pro will now read the MPEG-2 files from my Samsung unit. However, there is no sound!!!
Is Apple purposely making it impossible to do what I'm trying to do?
Why doesn't Quicktime or iMovie support MPEG-2 with AC3 sound?
Is there some other sound format that is normally used with MPEG-2?
Why would someone create software that reads movie files but doesn'rt read the sound that goes with them?
If I can't hear my little girl sing on these movies, then this whole project is a big waste of time and money!!
I hope someone from Apple can give me some answers.
A frustrated father,
R. Leifield

FWIW, MPEG is a distribution format, not an editing format. The best way would be to convert VHS to DV, edit it in iMovie and burn THAT to DVDs.
Sure, MPEG is a nice compressed format taking much less space than DV but the compression takes away quality.
IMO the best approach with MPEG source would be to edit (yes, it CAN be edited) it with apps like MPEG Streamclip (very limited editing features) or Capty MPEG Edit EX (more features) and author the edited MPEGs via apps like Toast, DVDSP, Capty MPEG Edit, Sizzle etc. THEN you won't lose any quality (unless some of the GOPs have to be re-encoded, that is).
BTW, unlike QT Player, MPEG Streamclip can play also AC3 or PCM audio in MPEG files.
See also:
http://www.sjoki.uta.fi/~shmhav/SVCDon_a_Macintosh.html#edit_convertMPEG

Why doesn't my art match on my iPad2? I have iCloud?

Why doesn't my art match with my music on my iPad2? I have iCloud?

Ive been checking the rightones import all vs import slevted and syncing over and over again, even now plugged in and since the iCLOUD cant get my ring tones..these also are paid for ringtones..this is sucky
HEY APPLE FIX THIS

Why doesn't iTunes add protected MPEG-4 audio files to its music library?

Why doesn't iTunes add protected MPEG-4 audio files to its music library? I copied these files to my iMac from an old PC laptop that no longer has internet access.

After downloading via iTunes, I move MP3 files from the default iTunes podcast folder to another folder (on an a external disk), I also change the name of the file and I change some MP3-tags.
You download from the iTunes store, delete the podcast, mess with it, move it around, rename it, change the tags then try to add it back to iTunes?
I want all my files in one index, the iTunes Music Library
In iTunes, right click - get info, click the Options tab and set *Media Kind:* to Music.

HT5037 Why doesn't my iphoto open now after the upgrade?... big bummer!

Why doesn't my iphoto open now after the upgrade?... big bummer

Because something is wrong? Really, with the amount of information you supply what else are you hoping for?

Why my ipad warranty doesn't match with date that i bought? I bought ipad 4 yesterday but as you guys know it was already discontinued.. Has my ipad been used?

Why my ipad warranty doesn't match with date that i bought? I bought ipad 4 yesterday but as you guys know it was already discontinued.. Has my ipad been used?
I bought in 14 january 2014 and the expiration said it will be in 5 september 2014
Is it mean that my ipad had been activated in 5 sept las year?
But the packaging is good and it looks like very new.
Please help me....
I bought in IT plaza in kuala lumpur, malaysia..
Heeellllppp...

The merchant told me it is new. And when they opened the box and turn the ipad on, the ipad asked me to activate first.
Is the 'restore to factory setting' can make us must activate the ipad again??

HT202157 So why doesn't the new software upgrade the Apple TV to 1080hp...from the 720hp? Do I have to buy a new Apple TV to get that Upgrade? Mine is only about 2 months old! Very frustrating if thats the case!

So why doesn't the new software upgrade the Apple TV to 1080hp...from the 720hp? Do I have to buy a new Apple TV to get that Upgrade? Mine is only about 2 months old! Very frustrating if thats the case!

If you want 1080, you will need to purchase the new Apple TV.

HT1491 Why doesn't it let me upgrade my app by buying the upgrade for $0.99 ?

Why doesn't the app let me buy the upgrade ?

What happens when you try?
If an in-app purchase is the Restriction to prevent in-app purchases set? Settings>General>Restrictions

Why doesn't my macbook upgrade?

why doesnt my macbook upgrade?

We need more information than that. How much RAM does your Air have? Hard drive space? What happens after the progress bar finishes and says install complete? Does it prompt you to restart? Do you install from the desktop or do you reboot to the disc first? Details, please!

Audio doesn't match the video ... why

Last night I tried to sort some of the clutter from my desk by downloading some recorded video on VHS tapes. The images worked fine with no dropped frames at all, however, the audio doesn't match the video.
Example 1: the footage is of skydiving recorded from Channel 4 (UK) while the audio that is captured with is commentry from several years ago when we lived back in Australia (Channel 7).
Example 2: the audio is very very slow.
The footage was recorded on a VCR which has no audio/video out facility and is converted via the ADVC 110 from a VCR which does have the audio/video out plugs. The DV is then saved to an external drive 500GB.
Can anyone suggest a way around this unique effect .... please.
Blue skies
Dean

G'day Martin,
Here are the answers to the questions you asked.
As far as I can tell everything is PAL. The VCR used to record the footage and the VCR used to download to the converter. The later has NTSC capability but not turned on (I checked).
The Canopus is set to PAL and the FCE easy set up is set to DV PAL converter.
The Video and Audio are recorded at the same time.
I should add that I tried it again this morning and it worked for a short while but then reverted to previous reported faults. I have tried about 8 different VHS tapes and they all do either of the two described faults.
Thanks for your suggestions.

HT4623 Why doesn't my iPad have a software update showing for me to upgrade?

Very frustrated why I can't upgrade my iOS! I don't have software upgrade option under setting.

Tpuente wrote:
... I don't have software upgrade option under setting.
That is only a feature of iOS 5 or later...
If you have iOS 4... See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
Note:
The iPad 1 can only update to iOS 5

Error: The decapsulated inner packet doesn't match the negotiated policy in the SA

I upgraded my ASA from 8.2(1) to 8.4(3) as I wanted to try to get Android devices to properly connect via VPN.
After some effort, I was able to get the Android devices to connect via VPN. However, my syslog server has a number of errors recorded that look this this:
%ASA-4-402116: IPSEC: Received an ESP packet (SPI= 0x1E76EFA6, sequence number= 0x1F0) from x.x.x.x (user= testuser) to y.y.y.y. The decapsulated inner packet doesn't match the negotiated policy in the SA. The packet specifies its destination as z.z.z.z, its source as a.a.a.a, and its protocol as tcp. The SA specifies its local proxy as y.y.y.y/255.255.255.255/udp/42246 and its remote_proxy as x.x.x.x/255.255.255.255/udp/0.
Digging further, it seems this error might be due to a NAT issues with the VPN connections. VPN previously worked with Cisco's VPN client on Windows, though I did not test to see if that is no longer working. However, I made no changes in the config, except for those related to additions needed to support L2TP. With the below config, Android clients can connect to the ASA and access the internal network, but they cannot connect to external addresses. I'm at a loss.
The addresses used in the config: 192.168.1.0/24 are on the internal LAN and 192.168.3.0/24 are addresses assigned to VPN clients.
I noted in the config this line:
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
The access list is not referenced anywhere, though it was referenced in the 8.2(1) config like this:
nat (inside) 0 access-list inside_nat0_outbound
I'm not sure what else changed, but I've looked over the config and I just cannot see what the issue might be. I'm hoping somebody might be able to point out my error.
Here's the config file (at least the parts that might be of interest):
: Saved
ASA Version 8.4(3)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
boot system disk0:/asa843-k8.bin
object network obj-192.168.3.0
subnet 192.168.3.0 255.255.255.0
object network obj_any
subnet 0.0.0.0 0.0.0.0
access-list outside_access_in extended permit icmp any interface outside time-exceeded
access-list outside_access_in extended permit icmp any interface outside echo-reply
access-list outside_access_in extended permit icmp any interface outside unreachable
access-list outside_mpc extended permit ip any interface outside
access-list inside_mpc extended permit ip 192.168.1.0 255.255.255.0 any
access-list testVPN_splitTunnelAcl extended permit ip 192.168.1.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
ip local pool VPN-Pool-1 192.168.3.1-192.168.3.254 mask 255.255.255.0
ip verify reverse-path interface outside
nat (inside,any) source static any any destination static obj-192.168.3.0 obj-192.168.3.0 no-proxy-arp
object network obj-192.168.3.0
nat (outside,outside) dynamic interface
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
group-policy testVPN internal
group-policy testVPN attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value testVPN_splitTunnelAcl
default-domain value test.us
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
group-policy testVPNns internal
group-policy testVPNns attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
username testuser password PASSWORD encrypted privilege 15
username testuser2 password PASSWORD nt-encrypted privilege 15
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group testVPN type remote-access
tunnel-group testVPN general-attributes
address-pool VPN-Pool-1
default-group-policy testVPN
tunnel-group testVPN ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNns type remote-access
tunnel-group testVPNns general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNns
tunnel-group testVPNns ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp type remote-access
tunnel-group testVPNnsl2tp general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group testVPNnsl2tp ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp ppp-attributes
authentication ms-chap-v2
One last question: in order to get the connection from Android to work, I was forced to use "tunnel-group DefaultRAGroup". Is that actually a limitation, or did I make an error that forced that requirement? I wanted to use "tunnel-group testVPNnsl2tp".
Thanks!

Chris,
This is still a bit off the mark. I think I might be confusing the issue by including some of the VPN configuration that I had previously installed and working (e.g., two other VPN tunnel groups with split tunneling on one of them). Let's just remove that stuff from consideration. I actually tested the current configs just to see if they are working since the upgrade. testVPN is working with the split tunneling, but testVPNns (no-split tunneling) does not allow external access. I guess there is a NAT config issue there, too, but not sure what it is, yet. I've not investigated that closely.
I want to solve one problem at a time, though I understand there are some interdependencies.
What I'd like to focus on right now is just the L2TP VPN connection.
From what I've been able to understand from the documentation, what I need are these lines:
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key P74bmqL6rT40bl5
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
I still want to assign the IP addresses to VPN clients out of 192.168.3.0/24.
The tricky part is understanding exactly what NAT rules to insert and to avoid that error message I'm getting relatred to the encapsulated packets. I tried to introduce the commands you had, but it's missing stuff that I would need for L2TP/IPSec (e.g., "mode transport"). I also don't think I want "pfs group5". The above config "works" in that I get connected -- all negotiation is done. It's just that packets from the VPN client are not able to go out to the Internet and I'm seeing that encapsulation error messages when I try to send a packet.
Paul

Image in Lightroom doesn't match exported image viewed in Photoshop

After all my hard work in Lightroom, I export the image to a folder on my hard drive. When I open this exported image in Photoshop and view it alongside the Lightroom version of its "twin" in Lightroom, there is a significant difference. Why is this? I want to use these images in my books, but my time is wasted if I end up with anything other than what I created in Lightroom. Shouldn't these images match exactly?

Thanks Jao and Michael...the color management idea makes a lot of sense.
Adding to this idea, when I open the Pshop file I get a message about the doc having an embedded profile that doesn't match current RGB working space, and the usual 3 options: Use the embedded profile, Convert color to the working space, or discard embedded profile. No matter which option I choose, none of the opened docs match the Lightroom version.
The color balance is fine, but the colors aren't as vibrant. The Pshop photo is dull and lifeless compared to the Lightroom version. I used Clarity which added subtle brightness, and Vibrance to crank up the color in LR which added wonderful dimensionality and punch to the landscape scene, but the Pshop version has dulled these back down.

Why doesn't Match upgrade these AAC/MPEG tracks?

Similar Messages

Maybe you are looking for