Why doesn't my camera work properly after backing up ISO7

Can anyone tell me hy my camera will not work after updating to ISO7.0.3. It appears in negative all the time. Unable to see any adjustments on my settings.

Nothing? Just left to resort to the 'geniuses'?

Similar Messages

Why doesn't the camera work the lock screen sometimes?

When I launch the camera app from the lock screen on my iphone (4), one of three things happens.
Sometimes the preview is really small, like this
http://i880.photobucket.com/albums/ac1/drtoffeejr/IMG_2358.png
http://i880.photobucket.com/albums/ac1/drtoffeejr/IMG_2359.png
this doesn't affect the actual size of the pictures however. Meaning if I take a picture while it's like that then swipe over to look at it, it is the normal size. I have also found that this part can be fixed by switching the the front camera then back to the rear camera.
The second thing that could happen is that the animation of the lens opening will freeze while it's still closed, meaning I can't see anything besides the closed lens picture.
The third thing that could happen is that it works fine.
These problems only seem to happen when I launch the camera from the lock screen as I have never had anything like that happen when I use the app after unlocking my phone.
Any help is greatly appreciated.

That is a new one. I haven't seen that before. You might have a hardware problem. Also may want to try to restore the phone and see if that fixes the problem. Also have you restarted the phone by holding the home button and the sleep/wake switch ignoring the swipe to power off message and then powering up the phone again?

Why doesn't my Phone work properly with my Cars Bu...

Car manufacturers are now building complex car kits into their vehicles.
The companies include:
Ford, Audi, BMW, Alfa Romeo, Peugeot, Vauxhall/Opel, Volkswagen, Mercedes, and other high end specification cars.
One of the functions, is that it pulls the phone book data from the phone via bluetooth.
Background Information
A lot of the Nokia E and N series, Symbian S60 handsets, do not carry the required bluetooth profile in their bluetooth stack.
The phone is missing the Phone Book Access Profile (PBAP) that allows the car to pull data from the phone.
Why the phones do not carry the profile is unknown. What is known is that using the Nokia 810 car kit downloader software, you can partly restore some of this functionality.
Additionally the Nokia 616 Car Kit Downloader will also function, along with the Ford Connectivity Downloader.
Workaround
The information is here:
http://europe.nokia.com/A4143881
You'll need to delete the existing pairing in the handset and the car, then install and run the application, don't just install the application and expect it to work, you must re-pair the handset and the car.
When it is installed start the application, and then re-pair the phone to the radio, this may then copy your contacts into the radio, be paitent, as it can take a few minutes to copy and setup.
It may copy the phone book over, but the Missed Dialled and Received calls may not work.
I have tested this with an Audi S3, A4, and A6 on a Nokia N82 and N95.
The Nokia E71, appears to have the profile and functions correctly with an Audi car kit, in Handsfree Profile mode.
The Nokia E71, when connected in SIM access profile mode is the same as the other E and N series handsets are requires the 810 or 616 downloader to be installed in the handset.
Installing the 810/616 downloader only restores phone book functionality, there are some software combinations on car and phones that work without the downloader.
It may also be possible for your car manufacturers franchised dealer to be able to update the software in your car so that additional features are available, they may charge for this service. Also updating software in the phone may also help, as Nokia may see fit to add the profile if they are able.
For some cars and handsets, when you are connecting with the SIM Access Profile function, you will still need to install the 616/810 downloader application as detailed above, as the phone normally switches off most of its functionality. The phone book will then normally function when you have installed the application.
The workaround only resolves the problem with the phone book. Problems such as random disconnecting which also is reported, are beyond the scope of this article.
Edit: 24-01-09
I have noticed recently that random disconnecting can be caused if you have an Internet Telephony Service running in your handset. Also if you have the WLAN discovery setting enabled then this can cause the same problem - whilst I am not attempting to try and resolve random disconnects, it could be a reason for why this is happening.
I have recently installed a VoIP service in my handset and 100 mtrs from my home when the handset disconnects from this service at my house, the Bluetooth disconnects from the Car Kit, in my E71.
Edit 14-04-09
Audi also make a Bluetooth Sim Access Profile adapter for their Generation II and Generation III (Low) mobile telephone interface. (Audi Part No: 8P0051440) The SIM access service will require the 810 phone kit downloader application. With this on my kit I am getting disconnections with Bluetooth. To prevent this, I switch Bluetooth off and then on again prior to connecting to the kit, this resolves the disconnecting.
Edit 12-05-09
Further to the Audi edit above, I now have an Audi S4 2009 with the Audi Mobile Phone Preparation (high) for this to function correctly with phone book access the 810 Downloader needs to be installed, and running when the phone connects to the car every time it connects. Otherwise the phone book access does not operate.
Edit:12-06-09
You can also use the Ford Contact Downloader application from
http://www.ford-mobile-connectivity.com/ - select downloads then Select a Nokia E or N Series Device and download the contact application (this works fine in my Audi)
Shunts...
Message Edited by shuntfield on 02-Nov-2009 02:51 PM
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

It allows me to load the AKO CAC sign in page. I click sign in using CAC, it asks me for my pin, I enter it then it load the page saying it has a problem with the security

Always on doesn't appear to work properly after downgrade from Standard to Basic

I was running a Standard tier setup for my webapps, with the always on option set to "on" without issue - sites would respond almost immediately even after not having been accessed for more than the 20 minute sleep period of the lower subs.
However, since I downgraded to basic (due to simply not making use of any of the extra features) I've found that my sites seem to take a while to load again after a period of inactivity. I've double checked the always-on option and it is on, and I've also
tried turning it off and on again.
Is this a known issue and does anyone have any suggested solutions?
Thanks, Daniel.

Hi Daniel,
Azure unloads your site if it is idle for the standard 20 minute timeout, which can cause slow responses for the initial site users after it is unloaded. Enabling Always On essentially causes Azure to automatically ping your site periodically to ensure
that it remains in a running state. Always on is not an available option on lower end plans.
However in Basic or Standard mode, you can enable Always On to keep the app loaded all the time.
It is not a known issue, I suppose in theory it could consume more CPU cycles and thus could require the deployment of more infrastructure.
Couple of things you might want to check :
- Increase the Instance count
- Check the Monitor Tab in Azure Website to see how much of CPU, DataIN and Data Out time is taken for a request to the site.
Recommend you to see this thread discussion on  Failed request tracing
for troubleshooting on Slow requests and a video  on
Troubleshooting Slow Requests with Failed Request Tracing that might help troubleshoot the slowness of website.
Regards,
Shirisha Paderu

Extreme & Express - Why doesn't extending range work properly?

I have an Airport Extreme 802.11n and an Airport Express 802.11g. The reason I bought the Airport Extreme was that I could use the Express to extend it's range and the two would integrate and all would be good and well. But here's the issue, and it's been with me pretty much since I bought the pair about 3 months ago.
They seem to have trouble keeping together. What I mean by this is, if both are plugged in and connected, at some point (I haven't noticed a regular pattern to it) when I open a laptop, be it an 11g iBook or an 11n MacBook, it will get a self assigned IP address. Which isn't greatly useful to me. The only way to resolve this is to unplug the Express, turn off airport on the client, turn it back on again and reconnect directly to the Extreme.
Now I can't work out what might be going on here, since it happens both when the clients are set to obtain an IP address through DHCP or if it's been set up manually. I have tried setting up the base stations both manually and through apple's setup assistant in Airport Utility. Often when a client finds itself stuck like that though, when I open Airport Utility only the Express will show up. Currently, the Express has had it's IP set statically. The DHCP pool has been adjusted so 10.0.1.1 through 10.0.1.100 are available for manual use and the rest are DHCP, so there's no conflicts of IPs.
Can anyone please help me? This functionality is pretty much the only reason I bought the Airport Extreme over a Linksys or D-Link box, and if I have to set the Express to remain solely a client and not extend the range, then the justification for the higher price of the Airport Extreme is void. I have reset the units in the past to no avail and as far as I can tell, they both have the latest firmware.
Thanks in advance, Daniel

Hi Macdanuk,
I am having the same issue and have had it from the start.
I use ADSL connected to airport extreme and then have 2 airport express units located around the premises.
I have the issue whereby if one of the units are plugged out (power socket) and plugged back in, it can;t seem to reconnect. Eventually it will supply itself a IP. (in the 169.254.... range).
The only way I can rectify the issue is to reconfigure the whole airport system and simply said, not plug out the airport express.
I hope I can also find some assistance here as I think my problem is very similiar to yours.
Regards,
Grootbaas

Question for music producers ! MacBook Pro and my audio interface from Virus Ti doesn't seem to work properly after I updated 10.9.4 Mavericks

Hello
Few days ago I upgraded my Macbook Pro to 10.9.4 Mavericks And I’m using the sound card from the Virus Ti for all audio in/out and when I’m not producing music , I usually close my Logic and I use the Virus Ti as a sound card for listening to Soundcloud or iTunes on my Mac and the audio usually come out of my studio monitors , but right now even when everything is connected , the sounds from the web site is coming out from my Macbook speaker instead of my studio monitors ? and I already checked the “Output/Input” in preference and is already say Access Virus Ti and I already repair disc too ! ,
Right now when I’m using Logic to produced with Virus sound card everything is working fine and the audio is coming out of my monitors but as soon as I turn off Logic to use Youtube or other web site, the audio automatic switch back to laptop speakers ?
If anyone had this problems with their audio interface and OS 10.9.4 , please advise !
Your help is much appreciated : )

@michelle929 don't feel so bad, i too which i never would have upgrade to ff4, OMG, so piss., worse is they deleted the old version from my computer, how dare them..lol... but most of the thing i use now don't wanna work.. i want my 3.6.15 well i think that was the last one i had.. piss piss,,and Michelle your not whining , just stating the fact's.. give me back the old version Mozilla... can't even find it on here,, any one knows where i can find it... if not gonna have to go to a server an get it,,
thanks Lotta firefox. great job, not tell us first hand what won't work....:(

My palm m105's touch screen doesn't work properly after a sync.

I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
Thanks in advance!
Post relates to: Palm m105
Post relates to: Palm m105

Maldoman578,
Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
EfrainM_VZW
Follow us on Twitter @VZWSupport

Camera not working properly after ios7 upgrade in iphone 4s

Iphone 4S
Camera not working properly after iOS7 upgrade.
It defaultly takes other effects that is chrome in filter section, once we wdit in phone it can brought to normal (without filter)
help me to solve this problem

Have you tried a battery pull? If the issue is still there, you can either take it to the store or downgrade your software to the previous version to troubleshoot.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?

I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?

See Recover your iTunes library from your iPod or iOS device.
tt2

Why doesn't my camera open from the lock screen after I updated to 5.1

Why doesn't my camera open in lock screen now that I have 5.1?

you have to slide the camera app up. then the camera will open.

Why doesn't this update work?

Why doesn't this update work? Can't I sum up two select count(*) in such a subquery?
Thanks
update sales T
set T.field2 = ((select count(*)
from sales t
where t.field1 = trunc(sysdate)) + (select count((*)
from sales t2
where t2.field2 is null));
I get
ERROR at line 4:
ORA-00907: missing right parenthesis
with the * under the +
In other words I want to run
update sales set field = ((select count(*) ..... ) + (select count(*) ..... ))
Edited by: Mark1970 on 26-mar-2010 1.37
Edited by: Mark1970 on 26-mar-2010 1.38

My problem is to undestand why I got a syntax error about parenthesis.Because you cannot perform arithmatic operation with a value coming from a subquery in a SET clause of UPDATE
SQL> update emp
2 set sal=(select 1 from dual)+1;
set sal=(select 1 from dual)+1
ERROR at line 2:
ORA-00933: SQL command not properly ended
SQL> select sal from emp
2 where deptno=(select 10 from dual)+10;
       SAL
       800
      2975
      3000
      1100
      3000
SQL> select deptno,sal from emp
2   where deptno=(select 10 from dual)+10;
    DEPTNO        SAL
        20        800
        20       2975
        20       3000
        20       1100
        20       3000Try such few examples..
Twinkle

Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

Up next doesn't seem to work properly with multiple speakers over airplay. The status bar on the computer shows the song playing, but not over airplay. When I restart the song it plays, but the same thing happens when the next song cues up. Any ideas?

Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David

Asha 501 : Whatsapp not working properly after 14....

Hi,
whatsapp is not working properly after software update, some times contacts never sync. screen goes pale and chat window doesn't show properly.
Looks like memory problem after the new updates or anything else?

Similar complains around the web. I'd recommend getting the phone flashed at a care point to see if that improves the situation.
Do wait for a couple of weeks for the full firmware files to be available at the respective care centers. AFAIK, they are not yet available in India.

Why won't my camera work? I used the screen shot for the first time and since i did that every time i take a picture the shutter closes as though it's taking it but no picture gets taken...help! Any suggestions?

Why won't my camera work? I used the screen shot for the first time and since i did that every time i take a picture the shutter closes as though it's taking it but no picture gets taken...help! Any suggestions?

Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David

Aluminum Wireless Keyboard not working properly after Firmware update 1.1

Hi,
Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
Thanks in advance.
Franco.

I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
Steve

Why doesn't my camera work properly after backing up ISO7

Similar Messages

Maybe you are looking for