Why doesn't my default email work?

Hey Ya'll,
Quick question if anyone can help. I have a new MacBookPro, and LOVE it. My email was working great, but as soon as my free trial of .mac expired, I can't get my default email from my non-.mac account. Why doesn't it work and what do I do to get it working?
Alisa

Launch Mail and select preferences and reset your mail app to Mail. If you were using web-based mail with the trial .Mac account, I don't know if any of that's recoverable. Check the .Mac forum.

Similar Messages

Why doesn't my ntl email work on iphone 5

have set up gmail that works fine, have used both incoming and outgoing mail server addresses. tried doing it through mircosoft still no joy
it was working fine until update. i have totally reset phone still no joy HELP please no one knows/has my g mail address
Tina

Go here and see if 4G is available in your area http://www.optus.com.au/network/mobile/coverage

Why doesn't the "back" button work all the time in Safari?

Why doesn't the "back" button work all the time in Safari?

thanks for the reply. You prompted me to check and I realised it wasn't installed on my test laptop and opening in Microsoft Reader. I've installed it now and it works.
My next challenge is to prevent the mailto: command opening Microsoft Mail instead of Outlook, but I guess every user will have a different default.
Thank you

Why doesn't my VGA adapter work to connect my iPad2 to my projector. I haven't had any problems in the past?

Why doesn't my VGA adapter work to connect my iPad2 to my projector. I haven't had any problems in the past?

Hey MarieF-D,
Thanks for the question. The following article provides basic troubleshooting steps that may help to resolve your issue:
iOS: About Apple Digital AV Adapters
http://support.apple.com/kb/HT4108
Troubleshooting
If you encounter an issue using the Apple Digital AV Adapter or VGA Adapter:
Disconnect and reconnect the adapter from the iOS device and display.
Connect directly to the TV, projector, or external display using a known-good VGA or HDMI cable.
Remove any VGA or HDMI extension cables or converters.
Note that accessories that convert a VGA or HDMI signal to other video formats (DVI, Composite, Component) are not supported.
Ensure that you are using the latest version of iOS. Some Apple Digital AV Adapters require iOS 5.1 or later.
Note: When using an Apple Digital AV Adapter manufactured before early 2012 with iPad (3rd generation), you may see the "This accessory is not supported" alert. Dismissing the alert will allow you to use the adapter.
For optimal performance, you may need to adjust the video resolution or settings for your display. If your display offers an "auto detect" or "factory default" setting, you may be able to use these options to optimize video resolution and display.
Thanks,
Matt M.

Why Doesn't the XIRR function work?

In Excel if you have 5 records from a1:b5 then XIRR looks like this:
XIRR(A1:A5, B1:B5) you get a nice neat answer like .35
Here is a version that works in Crystal that would require manual entry of any new quarters numbers and dates-- and if you plug this into Crystal it works:
(XIRR([1000000,-100000,-100000,-100000,-100000,10277.49,-100000], [DateValue(1999,2,1),DateValue(1999,3,1),DateValue(1999,6,1), DateValue(1999,12,1),DateValue(2000,3,1),DateValue(2000,6,1),DateValue(2000,9,1)]))*.100
You do get a nice answer of something like .035. But this is all done manually and I need it to function automatically when the report is refreshed.
So you have a range for the currency and a range for the date fields. I need to simulate this in crystal. Crystal has an XIRR function, and with the arrays, I should be able to fill in the range, but am having difficulty getting it to work.
After building the arrays, I made another formula to combine the arrays in the XIRR formula.
I am down to this error now after getting this formula this far --
"Numerical method did not converge; try another value for guess."
Here's where I am with the formula, although they don't want to use the guess part of the XIRR function - they just want to use the XIRR(number/currency, date). Maybe you could pass this on too?:
/{@Reset} for the group header (NOT using a repeated group header):
whileprintingrecords;
numbervar array x := 0;
datevar array y := date(0,0,0);
numbervar i := 0;
numbervar j := 0;
//{@accum} for the detail section:
whileprintingrecords;
numbervar array x;
datevar array y;
numbervar i := i + 1;
numbervar j := count({table.groupfield},{table.groupfield});
if i <= j then (
redim preserve x[j];
redim preserve y[j];
x<i> := tonumber({table.currency});
y<i> := datevalue({table.datetime})
//{@xirr calc} to be placed in the group footer:
whileprintingrecords;
numbervar array x;
datevar array y;
xirr(x,y)
The array works correctly. So why do I get that error and why doesn't the XIRR formula work like they say it should? Has anyone used this successfully in Crystal--maybe you could shed some light?
Thanks!

Hi,
I am receiving that same error when the last item in the array is 0, otherwise all works perfectly.
When I run the same group of numbers and dates in Excel it returns without issue.
-265500.00,-690000.00,-570000.00,16814.25,-855000.00,-619500.00,55293.46,30411.40,15183.76, 0.00
01-25-2007,03-06-2007,05-02-2007,06-29-2007,08-01-2007,08-24-2007,09-17-2007,03-14-2008,05-28-2008,03-31-2010
=XIRR(A2:J2,A1:J1,-0.1)
Is there a known bug in Crystal's XIRR function when the last value is 0?
Or a hot-fix that will repair this?
Thanks in advance,
Gary
PS. I am using Crystal XI Product Version: 11.0.0.2495

Why doesn,t my mail iccon work?

Why doesn't my mail icon work?

If you moved Mail out of the Applications folder, then applied the security update, Mail has been disabled.
It must stay protected in the Applications folder, or you risk the possibility that malware might change it and use it to send spam.
Mac OS X v10.6: "You can't use this version of Mail…" alert after installing Security Update 2012-004

Lost my iPhone and why doesn't find my iPhone work

Lost my iPhone and why doesn't find my iPhone work

A friendly reminder: In order to use Find My IPhone Successfully, you need to 1. Turn on Location Services, 2. Lock Location Services (Using Restrictions in Settings, General, Restrictions) so that if some one else finds your IPhone, they can NOT turn off Find My IPhone And/Or Location Services itself! 3. Add your Mobile Me and/Or ICloud Account to your IPhone. 4. Lock Accounts (Again in Restrictions) from being changed or Deleted so that your Mobile Me And/OR ICloud Account can NOT be Deleted! 5. Look Up the Location of your IPhone Before Suspending Service to the IPhone, NOT after Suspending Service (simple common since applies here as well).

Why doesn't my duplicate frame work in photoshop 2014?

why doesn't my duplicate frame work in photoshop 2014?
I draw a figure in frame 0 then duplicate frame. After the frame is duplicated I move the figure over to make sure there are different frames but as soon as I check the first frame Ive noticed that both frames have moved together. So nothing has changed. Why?

I always create the individual frames in layer groups first. So build what you need, break them up or duplicate them, position them where you want them and then create your frames by turning off all the layer groups or layers you don't need.
Here is an example of one of my layer pallets:
Each scene is a frame and I turn them on and off as I need them.

Why doesn't my iWeb page work with google chrome?

Why doesn't my iWeb page work with google chrome?

Bonjour
Don't test your website with Google Chrome if you publish it into a local folder.
Publish to a server. You need an URL with http:// and ( not file://) to view an iWeb site in Chrome.
You can also
activate the web sharing on your computer (Preferences system > Sharing > Check web sharing)
publish to Sites folder (MacIntosh HD > Users > Home folder >Sites)
and use the URL (with http) given by the web sharing tab in preferences system http://computer_name.home/~user_name/site_name/

Why doesn't Find my iPhone work?

I have set up the Find my iPhone app on my iPod, but it seems to be entirely useless. Perhaps you can help me understand what's going on here and why it's having problems.
The app is set up on my computer and my iPod. I recently left my iPod in the car, and later found it there, but the app was no help. Here are the details.
Before finding my iPod (manually), I tried to locate it via the app. I thought it could have still been in the house, where it would have been connected to the internet. (It wasn't.) Before searching the car, I opened Find my iPhone from the computer, where it told me the location of the computer, but not the iPod, which it said was offline. I turned on "lost mode", clicked "play a sound", and checked "notify me when found." Of course, since it was offline, not much could be done about it. I understand what's going on so far.
Then, I went to the car to search for my iPod, and I found it there. I brought it inside, and it immediately connected to the internet. It downloaded my email, worked perfectly. Except, Find my iPhone still didn't find it. I even opened Find my iPhone from ON the device I wanted it to find, and it still listed the very same device as "offline" -- even when I checked it from that device, which was connected to the internet, logged in, had the app open, downloading other things fine... I can even eliminate the possibility that it was searching for a different device, because it was labeled "This Device" when I select it on Find my iPhone from the iPod. It listed the pending actions, which "will take effect when this iPod connects to the Internet." It isn't even a case where this app wasn't connecting, while other apps were connecting -- the app was connecting well enough to tell me the location of my computer. But it still said the iPod was offline.
What is going on here? In this case, I found my iPod on my own and don't need help with that, but the app seems so completely useless I don't know what circumstances would have to be where it WOULD find it. I understand the limitations -- that it can only find a device that is on and connected -- but it should at least be useful for playing a sound on a device that fell behind the dresser or some such, and it doesn't even seem to be doing that properly. What's wrong? Is there some way to fix this?
Thank you!

It sounds like the iPod's Find My [Device] feature became disconnected to the service. This can sometimes happen after a password change or something weird like an update.
Try this and see if it helps give you some consistency.
On the iPod, go to Settings > iCloud and turn off Find my iPod (you may be prompted for your iCloud password if you are on iOS 7). Next Tap Delete Account at the bottom and "Keep on my iPod" for any pop-ups that have this option.
This action should kick you back to the main Settings screen. Tap on iCloud again and it should prompt you for your password (don't log in, just make sure it shows that to ensure you are logged out).
Restart your iPod by holding the Power (Sleep/Wake) Button and sliding to power off. Wait about 2 - 3 minutes then power it back on.
Go to Settings > General > Reset > Reset Network Settings.
Go to Settings > Wifi and tap your home network and join it again.
Go to Settings > iCloud. Sign in again with your Apple ID and password. Allow iCloud to use the location of your device (Find my iPod switch is on).
Check iCloud.com or the Find my iPhone app to see if your ipod is now locatable.
Also, Go to Settings > Privacy > Locaiton Services and make sure Find my [Device] is turned on.

Why doesn't the CC app work properly?

I've been using Creative Cloud for some time now and am really loving it, however I must say it is a source of annoyance that the Creative Cloud app just doesn't work properly.
Firstly, I used it initially to download all my apps, then after an update those apps no longer appeared in the "Apps" list. Now only those that have been installed since that update appear in this list. Why doesn't the "Apps" list display all of the Adobe CC apps that I have installed on my computer?
Why does it keep reinstalling fonts? I'm always getting "Lush Script Regular" and other fonts being added.
It regularly comes up telling me that Dreamweaver and Premiere Pro need to be updated, but always I get an error, then the update request disappears.
I'm regularly getting 4 files that it can't sync - even though they are the same files as others in the folder. If nothing else, why can't I say "Great, got the message". Also, why is the error message just "due to server error" with no advice on how to resolve it? Why is there a server error on only these 4 files?
It seems to me there are still some teething issues with the CC app, but what I don't understand is why they aren't being resolved much faster, given that this is the portal to the service.
Of course, given Adobe I doubt I'll get satisfactory answers – a little jaded with their responses. Anyway, thought I'd at least post the questions.

Questapo I am sorry you have been facing difficulties with your Creative Cloud experience. I don't believe it will be possible to address all of your concerns in one discussion. I would not be surprised if at least three of the issues are related to the same root cause.
First in order for the applications to be visible are you regularly needing to delete the OPM.db file? You can find this listed as solution 2 in CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

Why doesn't my create pack work?

Why doesn't my create pack do anything that I need it to do. Can't save to pdf, can't retrieve, doesn't recognize format. The free trial version worked; the subscription does not.

If you moved Mail out of the Applications folder, then applied the security update, Mail has been disabled.
It must stay protected in the Applications folder, or you risk the possibility that malware might change it and use it to send spam.
Mac OS X v10.6: "You can't use this version of Mail…" alert after installing Security Update 2012-004

Email Submit Button doesn't use default email software

When I click the Email Submit button, the form does not use my default email program (Eudora). Instead it uses an old hotmail account which I don't even use anymore.
All other web pages bring up Eudora when I click on a mail link.
Only Live Cycle documents do not.
I have the latest version of LiveCycle.
Is there a fix for this?

When you click the submit button, do you get a window that has the title "Select Email Client"and has the options of "Desktop Email Application" and "Internet Email"? If not, does anything at all happen?
Note that Mac users must have Acrobat or Reader installed and be viewing the PDF in Acrobat or Reader for it to work. Many (most?) Mac users have the Preview Application as their default PDF viewer, and it does not support many interactive features such as form submissions. Although some third-party PDF viewers for Windows support form submissions, many do not.
For those that do not use PDF viewers that support form submissions, they will have to manually attach the document to an email message.

Why is Gmail the default email account in iOS 7?

When I open iOS 7 Mail (after quitting it) it automatically opens my Gmail account. I have tried using Setting to change the default email and I have tried reordering the accounts in the Inbox window but nothing works.

I don't know. Mine generally opens in whichever account it was in when I closed it (including All Mailboxes).

Why doesn't the alt tag work in firefox to open a description of an image on mouseover

In IE, when I roll my mosue over an image, it gives a tooltip description of the image contained in the html alt tag. Why doesn't this work in Firefox?

The "alt" tag is meant to show text when the image isn't loaded, the "title" tag is meant for a description of an image on cursor hover. IE has been doing that wrong for many years, where Firefox follows W3C standards. A properly coded webpage should have both "alt" and "title" tags.

Why doesn't my default email work?

Similar Messages

Maybe you are looking for