Why doesn't my keyboard type properly when I am using Googlemail for email?

When I am using googlemail, my new Toshiba Satelitte L350 doesn't type properly - constantly missing letters/spaces - i have to slow down incredibly to check that each letter has registered on the screen. The laptop keyboard has this problem, as well as plug in keyboards. No other application is affected ie i can type at speed in word
Anyone come across this problem?
Cheers
Katy

>The laptop keyboard has this problem, as well as plug in keyboards.
This issue has nothing to do with your notebook. This question is here on the wrong place. Try to contact Google support and ask them why this happen?
To be honest I have noticed similar behaviour when I write mails on GMX mail. Some letters are simply missing.
Believe me it has nothing to do with notebook functionality.

Similar Messages

  • Why doesn't my image show up when i attach it to an email?

    ok, i have a jpeg i want to email.  i click on attach and the drop down comes up, i navigate to the image i want and highlight.  at this point--always in the past up until last week--a thumbnail of the image shows up in the column to the right of the name of the image, so i can make sure i'm sending the right image.  suddenly, i'm no longer seeing the image to the right. (see attached)
    i fear this may be  more a mac query than a PS one, but you folks are so knowledgable i thought i'd start here.  any thoughts?
    thank you!

    see attached for File Handling settings.  see any problems there?
    thanks for reponding!

  • Why doesn't the keyboard display lower case when this is selected?

    Why doesn't the keyboard display lower case characters when these are selected?

    The same reason physical keyboards have capital letters, easier to read. If the iPad keyboard is in caps you'd know because the Shift key would be colored blue.

  • Why doesn't my imac turn on when I turn on Apple TV?

    Why doesn’t my imac turn on when I turn on Apple TV?

    Yes, otherwise some people might have to walk up to the third floor and turn on iMac,
    and then go back down to living room in order to stream form iTunes. My iMac is close,
    but not in same room. There must be something I don't have set up right.

  • Any idea why I can only hear a caller when I'm using speaker phone?

    Does anyone know why I can only hear a caller when I am using speaker phone? 

    Hi goodferg,
    The troubleshooting steps below may help you with the sound issue you are having with your iPhone 4:
    iPhone: Can't hear through the receiver or speakers
    Resolution
    Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    Make sure the Ring/Silent switch is not switched to silent.
    While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
    Restart the iPhone.
    If restarting the iPhone doesn't resolve the issue, try restoring the device.
    If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Hope this helps!
    - Judy

  • Why am I getting an error message when trying to use a template?

    Why am I getting an error message when trying to use a Pages template?

    You are getting an error message because there is an error.
    Knowing wht version of Pages you are using, what template you are attempting to open, and what error message Pages is sending you might help determine why you are getting that specific rror message. Without those, the first sentence above i pretty much all that can be said with any assurance.
    Regards,
    Barry

  • Why do i get an error 8003 when trying to download apps for my IPAD?

    why do i get an error 8003 when trying to download apps for my IPAD?

    There's some advice on that one in the "Error -50," "-5000," "8003," "8008," or "-42023" section of the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Why do assets shift to the left when I delete something?  For example if I have a whole series of te

    Why do assets shift to the left when I delete something?  For example if I have a whole series of text inserts in my movie and I delete one... assets to the left of the deleted text will shift.  And the snap is NOT checked.  It would be helpful if assets would stay in place and not shift to the left ... groan.
    And thanks for the help previously given on another issue.  I can't seem to find the origional post but did want to thank Steve for his help.  Most appreciated.
    Bev

    Hold the Shift key down while you press delete.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Hi ! i have this new itunes account but when i wanna use this for apps he ask me for a card number but i don't have one .what i supposed to do ?

    Hi ! i have this new itunes account but when i wanna use this for apps he ask me for a card number but i don't have one .what i supposed to do ?

    Hi Mada7ina,
    If you are looking to set up an iTunes Store account without an associated credit card, you may find the following article helpful:
    Apple Support: Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
    http://support.apple.com/kb/ht2534
    Regards,
    - Brenden

  • When I can use Cameraw for Canon EOS 7D Mark II?

    when I can use Cameraw for Canon EOS 7D Mark II?

    You must wait for the next Version!
    nice day
    mangray

  • How do i change the "profile" picture on m iPad when I'm using iMessenger for IOS5?

    How do i change the "profile" picture on m iPad when I'm using iMessenger for IOS5?

    You do realize that only you see the photo associated with this correct - nobody else will see your photo - only you will.
    You have to add the photo in the contacts app. Locate your vcard and tap Edit. Then tap the area where the photo will be located to add a photo. You can take a photo or choose one from your photos app.

  • HT5569 How do I print using a wireless printer when I'm using wifi for Internet at the same time

    I can't figure out how to print via wifi when I'm using wifi for Internet at the same time please help

    You need to have your printer & ipad connected to the same wifi router.  ( This would be my best guess. )
    Robert

  • Tryng to set up Aple ID on wifes iph 6, she's forgotten her password. At iforgot I type in her gmail ID and ask for email but none comes ?

    trying to set up Apple ID on wife's new iphone 6, she's forgotten her password. At "iforgot.apple.com" I type in her gmail ID and ask for email but none comes ?

    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • Why doesn't Oracle.DataAccess.Types classes support IConvertible?

    Hello:
    Is there a reason why the Oracle types don't support IConvertible?
    It is really annoying. Especially when cmd.Parameters["PARM1"].Value is usually an Oracle type and cmd.ExecuteScalar returns a .NET type.
    It essentially means I have to write different code for conceptually identical code. Is there are a way to tell Oracle classes what types I would like to recieve? Is there are way to get an integer, etc. without invalid cast errors and without needing to test my code first?
    I would really like to know what to expect when I access a property or a method. However, it is really hard for me. Some times I am expecting an Int32, but I will get a Decimal/OracleDecimal - even when I say in the OracleDbType that I want and Int32.
    If the Oracle type supported IConvertible I wouldn't have to worry about it and I could use the built-in .NET class Convert to do it for me. What am I to do? Am I missing something?
    Thanks,
    Travis

    For example:
    OracleCommand cmd = new OracleCommand("SCALAR_PROC", conn);
    cmd.CommandType = CommandType.StoredProcedure;
    cmd.Parameters.Add("PARAM1", OracleDbType.Int32, ParameterDirection.ReturnValue);
    cmd.ExecuteNonQuery();
    object o1= cmd.Parameters["PARAM1"].Value;
    // What is o1 without needing to guess?
    cmd = new OracleCommand("SELECT 123 FROM DUAL", conn);
    object o2 = cmd.ExecuteScalar();
    // What is o2 without needing to guess?
    // Shouldn't these return conceptually the same type?
    // How can I use the same code to get the type I want?
    Now, if Oracle types supported IConvertible, I could write this simple line of code to get an Int32:
    int i = (int)Convert.ChangeType(o1, typeof(int));
    Ta da! However, Oracle types cause an error because they are not IConvertible.

  • Why can I not edit tags properly when I click on the star/bookmark icon?

    Firefox 6.0
    When I try to edit tags, I cannot see the text I'm typing and when I type something and say "Done". The changes are saved so that's fine. I also noticed when I choose the folder for where the bookmark goes via clicking the star/bookmark icon, it doesn't update the choice I've made visually.

    What happens when you click the star (now colored gold) a second time? See the steps in the process of adding a bookmark by the method you are using. Step 1, step 2....
    See: http://support.mozilla.com/en-US/kb/Bookmarks#Making_new_bookmarks

Maybe you are looking for