Why doesn't my keyboard work when I am trying to sign up for 3G

Whenever I try to sign up for a month of 3G (AT&T), I am unable to fill out the form because the keyboard does not respond.  The form will respond to a touch to select a field, but not respond to the keystrokes on the keypad.  The only way that I have been able to make it work is to copy and paste from notepad.  That is not a satisfactory solution because I am unable to toggle back and forth to notepad to retrieve the next field entry. 
Please help...

Upgrading to iOS 5.0.1. solved this problem.

Similar Messages

  • Why doesn't my password work when installing AFP?

    I am trying to install the new Adobe Flash Player and my password is not working, but I can sign into my Adobe account. I have reset my password and it still works for the account.

    It's not.... your Adobe password, but your Operating System password, required to install software.

  • HT4993 why does my internet not work when not connected to wifi?

    why does my internet not work when not connected to wifi

    Hi farmgirl0812,
    Thanks for using Apple Support Communities.  This article has steps to try if you are unable to connect to a cellular network:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    - Ari

  • Why doesn't the keyboard display lower case when this is selected?

    Why doesn't the keyboard display lower case characters when these are selected?

    The same reason physical keyboards have capital letters, easier to read. If the iPad keyboard is in caps you'd know because the Shift key would be colored blue.

  • Why doesn't apple tv appear when playing video in safari?

    Hi Guys:
         I just bought an apple tv. I am able to use the mirroring function with no problem, and I can see the apple tv in the "Airplay" menu.
         But When i play a video in safari(mirroring turned off), I can not see my apple TV in the "AirPlay" menu.
          So my question is : why doesn't apple tv appear when playing video in safari?
    Does the same thing happen to you guys??
    btw, I just dont want to mirroring when play a video in safari, that's why i'm asking this question
    Any help is appreciated!
    Thanks!

    Experiencing the same issue.  Everything used to just work.  I'm up to date on *everything* and it's all apple devices (airport extreme, appletv, 2 macbook pro lion, iphone4s, ipad). 
    My gut says it's the AppleTV since it happens from both laptops that have itunes.
    Let me know if you find a fix.

  • On the iPhone, when the server rejects the email address and it sits in the outbox, why doesn't it automatically resend when the server is fixed?

    On the iPhone, when the server rejects the email address and it sits in the outbox, why doesn't it automatically resend when the server is fixed?

    Hi Razmee,
    Thanks for your response.
    The mail server worked when I originally set it up and continued to work for months afterwards.
    What would make the outgoing mail server not be set up correctly after all that time?
    Thanks again.

  • Why won't my pandora work when I'm not on wifi? I have the cellular data on for it but I never works. Also pandora isn't the only app of mine that does that.. What's wrong with it??

    Why won't my pandora work when I'm not on wifi? I have the cellular data on for it but I never works. Also pandora isn't the only app of mine that does that.. What's wrong with it??

    You're welcome.
    Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
    You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception.

  • Why won't my keyboard work in e-mail mode?

    Why won't my keyboard work in e-mail mode?

    Could you provide more detail on what you are doing? Using Mail? Does the keyboard appear when you touch the new Mail icon?
    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    No data will be lost.

  • Why Dynamic Parameter is not working, when i create report using stored procedure ?

    Post Author: Shashi Kant
    CA Forum: General
    Hi all
    Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
    Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
    is not shown to me when i referesh the report for viewing the results.
    I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
    ============================================================================================
    1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
    Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
    Dynamic Parameters in Action
    My question is that whether dynamic parameter is working with storedprocedure or not.
    When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
    One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
    Please reply soon , it's urgent
    Regards
    shashi kant

    Hi Kishore,
    I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
    expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
    =lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
    As to the second issue, please try to use the following expression:
    =Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
    Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl  file with all the size properties to us by the following E-mail address?  It is benefit for us to do further analysis.
    E-mail: [email protected]
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

    Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

    c.pfaffenbichler wrote:
    Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
    And what kept you from posting a screenshot?
    I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos.  You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
    It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image.  I've uploaded it at the size it was supplied to me at (about 2700 pixels wide).  So
    Click to open the full image, right click and copy, and paste into Photoshop.
    Select the clone tool, and set its blend mode to Darken.
    Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
    Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
    It works even better if you clone on a new layer also set to Darken.  No masking, just Photoshop blend mode magic.
    You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
    Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

  • What on earth is the "click me" lego man on the home page and why doesn't it do something when I click?

    What on earth is the "click me" lego man on the home page and why doesn't it do something when I click?

    The Click Me logo is part of the Humble Mozilla Bundle promotion - once clicked you should be able to control the character with the "WASD", and "IJKL" keys.
    Quoting '''the-edmeister''' from https://support.mozilla.org/en-US/questions/1025706
    That Click Me game is part of the Humble Mozilla Bundle promotion on the default Home Page [about:home], that loads from the Mozilla servers in the "Brand Logo" (DIV) section of about:home. A feature that was first used in Firefox 29 [IIRC] just prior to the start of the Olympic Games.
    Also, part of that promotion is addressed in the "Snippet" below the Search Container on the about:home page.
    If you want to block the "Brand Logo" section (and the "snippet" below the Search container) from ever being seen again, you can install Stylish and this UserStyle. https://userstyles.org/styles/104673/about-home-hide-snippets-and-hide-brand-logo

  • Why does my MacBook stop working when I tr to plug in my iPad to do some file syncing?

    Why does my MacBook stop working when I try to plug in my iPad to do some file syncing? This is the second time I have had it happen to my MacBook. The computer just shuts down and cannot be restarted. When I plug it into the charger I get a faint Green light where it plugs into the MacBook. When I took the computer into my local Mac store last time this happened (Nov 2012) they reckoned they couldn't find anything wrong with it. Has any body else encountered a similar issue?

    That would be a filter, yes. Didn't know Verizon handed out phone/DSL wall split filters. I would honestly take a look at the physical jack it is connected to for corrosion or lose connections as I doubt the filter is bad out of the box. Anyways, what was the original problem you had with the Phone and DSL that prompted Verizon to send out a filter?
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Why doesn't this update work?

    Why doesn't this update work? Can't I sum up two select count(*) in such a subquery?
    Thanks
    update sales T
    set T.field2 = ((select count(*)
    from sales t
    where t.field1 = trunc(sysdate)) + (select count((*)
    from sales t2
    where t2.field2 is null));
    I get
    ERROR at line 4:
    ORA-00907: missing right parenthesis
    with the * under the +
    In other words I want to run
    update sales set field = ((select count(*) ..... ) + (select count(*) ..... ))
    Edited by: Mark1970 on 26-mar-2010 1.37
    Edited by: Mark1970 on 26-mar-2010 1.38

    My problem is to undestand why I got a syntax error about parenthesis.Because you cannot perform arithmatic operation with a value coming from a subquery in a SET clause of UPDATE
    SQL> update emp
      2  set sal=(select 1 from dual)+1;
    set sal=(select 1 from dual)+1
    ERROR at line 2:
    ORA-00933: SQL command not properly ended
    SQL> select sal from emp
      2  where deptno=(select 10 from dual)+10;
           SAL
           800
          2975
          3000
          1100
          3000
    SQL>  select deptno,sal from emp
      2   where deptno=(select 10 from dual)+10;
        DEPTNO        SAL
            20        800
            20       2975
            20       3000
            20       1100
            20       3000Try such few examples..
    Twinkle

  • Why does AirPort Extreme stop working when I plug in a USB hard drive?

    Why does Airport Extreme stop working when I plug in a USB hard drive?  The USB drive has its own power supply.  I've tried isolating the hard drive from Airport using a powered USB hub to no avail.

    The USB port on the AirPort Extreme is borderline as far as its ability to supply adequate power to a hard drive. Another way of saying the same thing is that this is not a high power USB port, like you would find on a computer.
    Your 2TB drive likely requires a bit more current than the USB port on the AirPort Extreme can supply. It is also possible that the drive's firmware may not support a network USB connection....only a "local" connection to a computer. Check with Seagate support on that possibility.
    Try using a powered USB hub with the 2TB drive....and make sure that the drive is formatted correctly in Mac OS Extended (Journaled) or FAT32....which the AirPort Extreme USB port can accept.

  • Why does the alarm not work when the iphone 4 is turned off

    why does the alarm not work when the iphone 4 for is  turned  off works fine when on most other phones work when off

    The only phone I've ever had that would turn on and sound the alarm is a Blackberry. So, I'd hardly say "most phones" have this function.

Maybe you are looking for

  • How to get the callback from an asynchronous BPEL?

    Hi, I have deployed an asynchronous BPEL on Oracle Application Server as a Web Service. The BPEL is named CreditRatingBPEL. The input is a social security number (Ssn) and the output is a credit rating. Now I have some troubles in consuming BPEL with

  • Display blob field  on pdf  with pl_fpdf

    Hi All, I wish I could use some method to output PDF from the PL/SQL. I already have a document (image stored as BLOB). Now, I need to output this image in PDF. I know doing this outside database is easy and advisable. When I use pl_fpdf with image f

  • IPhoto quits unexpectedly after restoring from time machine backup

    After hard drive failure my hard drive was replaced. I restored my data using my time machine backup on the new hard drive. The first time I tried to open iphoto, it did "updating thumbnails" for at least half an hour or more and then quit unexpected

  • Number range of product group

    Dear all where we define the number range of product group? Rgds Avinash

  • M-audio device not detected

    I keep getting this message no matter what I do. Every time I try to op the M-audio firewire software, PT m-powered 7, I always get that message. "m-audio device not detected on this mac". I can't figure it out.