Why doesn't my phone auto-lock after one minute?

From the settings - it's checked to auto-lock after a minute, but for some reason - this does not always happen. I have tried turning off the phone and back on again - that did not work. How can this be resolved?

probably. turn it off for sometime , restart the phone and check.

Similar Messages

  • TS3474 Why does my iPod Nano turn off after one minute of use?

    I just got a new 16 GB iPod Nano and it turns off after one minute of use.  Why does it do this?

    I figured it out.  Headphones were not plugged all the way in.  This support community is awesome.  Thanks everyone.

  • My phone is not auto lock after 1min as specified

    my iphone 4 is not auto lock after 1 minute as i specified in the settings. operating sytem is iOS6

    to see the camera icon, double click the home button when you are on the lock screen. this will show the music controls and the camera icon. double-click again to close them.

  • My ipod touch won't dim after one minute

    I have an ipod touch 3rd gen and the other day I was changing some settings which changed a setting regarding the back light. I have it set to auto lock at one minute but as I have the music playing the ipod won't dim or lock itself unless I physically lock it.

    Follow the instructions here: http://www.apple.com/support/ipodtouch/assistant/ipodtouch/
    It will probably result in having to restore the iPod. Here are those instructions, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the Pod touch, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the device.
    If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Select the iPod in iTunes and choose "restore from backup".

  • E52 phone auto lock

    My E52 has proble. After enanled function phone auto lock period 30 mins, I could not disable it. When i goto phone autolock period, change, select NONE, then it appeared error: phone unable to unlock.
    I tried factory reset and reinstall software but still can not change. I have to enter lock code after every 30 mins phone unuse.
    Anyone can help to fix it? 
    Thanks.
    Solved!
    Go to Solution.

    I found this solution on Blog Hanzz, and it is working
    Menu - cntrl. panel - settings - general - security - phone and SIM card - phone autolock period
    The error was: Unable to change period
    To remove it, I did the following:
    Go to: Cntrl. panel - Phone - Encryption - Phone memory and switch setting to ON
    Reboot Phone (do not know if this is necessary), go back to Phone memory and switch it to OFF
    Now you can change the autolock period to None:-)

  • HT5037 Why doesn't my iphoto open now after the upgrade?... big bummer!

    Why doesn't my iphoto open now after the upgrade?... big bummer

    Because something is wrong? Really, with the amount of information you supply what else are you hoping for?

  • HT4972 my phone has locked  after updating , what should i do now to unlock ? now i don't live in  usa ,i live in Bangladesh and i don't have that sim that i used to . i want to use Bangladeshi sim .

    my phone has locked  after updating , what should i do now to unlock ? now i don't live in  usa ,i live in Bangladesh and i don't have that sim that i used to . i want to use Bangladeshi sim .

    The phone was hacked to unlock it. It relocked when you updated. ONLY the carrier it is locked to can authorize unlocking it. If you are not/never were an AT&T customer and you do not have an original store receipt from either an AT&T or Apple store in the U.S. for a no commitment AT&T iPhone, they will NOT unlock it.
    Buy a new phone.

  • Is there any app for phone auto start after swithced off??

    Is there any app for phone auto start after swithced off??

    Are you looking for an app which will startup the Z10 at a specified time?
    I don't know of one. I have a feeling once OS 10.2 is available you'll see apps such as this.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • TS3408 After I update my website, why doesn't Safari reflect this-even after emptying cache? (Chrome does)

    After I update my website, why doesn't Safari reflect this-even after emptying cache? (Chrome does). Any help would be great. I am a web developer and need to reload the page constantly to see changes, I can't have it be that safari takes a day to refelct changes-it used to happen instantly, what has changed?

    It probably says more about MySpace than Safari but anyway you could try the latest nightly build of Safari's Webkit web browser engine. I always use this now and find it offers greater all round performance.
    Try it and see if it helps.
    Just click the big 'Download Nightly builds' button on this page.
    http://webkit.org/
    In case you don't know, you just run the webkit application instead of Safari but in use it will seem no different than Safari because all you're doing is running an updated version of the rendering engine in Safari. Safari 3.1 remains untouched and you can switch back to that if you wish.

  • My phone was locked after updating ios 5.0

    my phone was locked after updating ios 5.0 can i get backto normal

    Charge it with a wall charger for at least 30 minutes.  Then, hold the on/off switch and home button together for at least 15 seconds untill you see the Apple Logo.
    Hope that works.

  • Why doesn't my phone charge? I changed the battery, now it won't charge at all and it's almost dead.. Any suggestions on how to fix it?

    Why doesn't my phone charge? I changed the battery, now it won't charge... Any suggestions on how to fix it?

    iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.

  • Hi my iPhone 4 is stolen, I ve on it Igotya app. It sent me the pic and location of the *******. I don't know what to do next; a question plz does the phone get locked after 3 times of entering wrong password lock, thanks

    Hi my iPhone 4 is stolen, I ve on it Igotya app. It sent me the pic and location of the *******. I don't know what to do next; a question plz does the phone get locked after 3 times of entering wrong password lock, thanks

    What To Do If Your iDevice Is Lost Or Stolen
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
    Reporting a lost or stolen Apple product
    What-To-Do-When-Iphone-Is-Stolen
    Lost or Stolen iPhone? Here’s What to do.
    6 Ways to Track and Recover Your Lost/Stolen iPhone
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
    Find My iPhone
    Setup your iDevice on MobileMe
    How To Set Up Free Find Your iPhone (Even on Unsupported Devices

  • I do not know what I should phone is locked after changing the operating system

    I do not know what I should phone is locked after changing the operating system , have the original box , receipt lost, Apple said that it is necessary to support the receipt of the first as I can not find the receipt of the first purchase when I moved to another country . I now throw my iPhone ?

    It depends what you mean by 'locked' - it can mean locked by a passcode or linked only to one particular carrier (service provider). If the latter, see the post above; if it's a passcode issue:
    1. Assuming this was bought new and you have set up Activation Lock and forgotten the passcode, please see this page:
    http://www.lifehacker.co.uk/2011/10/24/youve-forgotten-iphones-passcode
    2. If you bought it second-hand (used) - though this is not the impression I get from you post - then only the previous owner can unlock it.

  • Windows 7 locking after 1 minute

    OK, so starting off, i have read over all of the other posts and have found none of them work.
    My computer locks after 1 minute, this started today, i have not changed any settings, nor have I recently as I have had this computer for a while.  I have looked at all of the settings and i have all of the sleep/hibernation functions turned off. 
    I have the "lock screen on wake up" function also turned off.  I do however have it set to dim, and then turn off the display after 1 minute, but this has nothing to do with the sleep function.  It does not dim the display before locking, only after,
    as if it wasnt locked, please give me anything you can to help as this randomness is very irritating.

    I don't think Arthur Xie's response should be marked as the answer.  This doesn't sound like it has any relevance to Craig's original question, and hasn't been corroborated by anyone.  It threw me off the scent when I encountered the exact same
    problem - Windows 7 locking me out after 1 minute and requiring password re-entry
    It turns out that Ramesh's answer was the one that worked for me.  Somehow my machine got set to wait 1 minute and "on resume, display logon screen" was ticked.  Don't know how this happened.
    I initially missed this, because the selected screensaver was "(none)", so I assumed all the settings on this page were irrelevant.  It does raise the interesting usability point that a screen saver of "(none)" can still blank the screen, even
    though the user hasn't purposely selected the "Blank" screensaver.

  • Nokia N900 auto off after 15 minutes

    Nokia N900 auto off after 15 minutes. I am also reflash my mobile but problem is not solve please help me

    More information..
    Does it happen when it is plugged into a charger?
    What is the battery level?
    Are you using the battery that came with the phone?
    Are you using a different battery?
    Have you "over clocked"?
    Does it power off when you are actively using the phone?
    Does it power off only when the phone is idle and untouched?
    What happens if you run this command in the terminal application?
      cat    /proc/bootreason

Maybe you are looking for

  • Photos look less sharp when not in editing view

    This is kind of confusing to explain...but I'll try! When editing a photo in iPhoto '09, I adjusted it to what I wanted, but once I leave editing mode and view the photo as a preview (by double clicking on the thumbnail) it looks much less sharp and

  • Is it neccesary certificate&ACL data to use functions in R3 via the RFC?

    Hi. I create sap r3 471 ides version. And try to connect via the iway(third party product to call function via the RFC). I referenced some block, and they says if I want to call functions in sap r3 471 via the RFC, I should check create remote functi

  • Controller in Search help exit

    Hi From where comes the callcontroller-step? If it comes as 'disp' how can i change it to 'Select'? and How in different users there are different results? Thanks Have a nice day

  • Comcast Metro Ethernet Setup

    We have one customer with one ASA and one 3750 switch in headquater. 6 1801 Routers in 6 branches. All connected via MPLS/BGP provided by ATT. And it was terminated at one port on 3750. We plan to replace that with Metro Ethernet Hub/Spoke topology s

  • My safe mode won't come off

    having trouble with my pc