Why doesn't my screen scroll up when typing after updating to 8.3?

What am I doing wrong?
After updating my iOS to 8.3 on an iPad I have been unable to see my curser once it progrsses down the screen behind the keyboard.  The screen doesn't scroll upward to show the cursor.
This is very annoying since Id like to know where I'm typing and if I collapse the keyboard and touch the screen to move the cursor, the keyboard pops back up and hides the cursor.  This typing feature works fine on my iPhone 6s with the upgrade but not on my iPad.
Any help would be appreciated on this matter

Turn off "Split Keyboard" in General settings / Keyboard / Split Keyboard

Similar Messages

  • Keypad is slow when typing after update?

    why is it that after updating my phone to ios7 my keypad is incredibly slow when recognising touch and showing the typed words?
    I was wondering if anyone else has had the same problem after updating their phone/ipod too and if there is any way to fix it.
    its incredibly frustrating as I have to wait around 10 seconds before a sentence is typed up fully (its completely unresponsive then suddenly the whole thing appears) and if I need to add a number, comma, questionmark, etc it can take forever before I am able to do so. None of my friends who have updated have had the same problem but then they all have the iphone 5 (I have the iphone4)
    any advise is extremely appriciated, thanks very much!

    Although it has not happened to me, there are two solutions that seem to work to other people
    1.- Go to Settings > General > Reset > Reset All Settings
    2.- Go to Settings > iCloud > turn off Documents and Data
    Hope that helps

  • Why doesn't my imac turn on when I turn on Apple TV?

    Why doesn’t my imac turn on when I turn on Apple TV?

    Yes, otherwise some people might have to walk up to the third floor and turn on iMac,
    and then go back down to living room in order to stream form iTunes. My iMac is close,
    but not in same room. There must be something I don't have set up right.

  • Why doesn't the screen respond in bottom part

    why doesn't the screen respond in bottom part

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If they fail to resolve the issue, this would tend to indicate a hardware issue.

  • Why am I getting error code 1402 when trying to update adobe reader 10?

    Why am I getting error code 1402 when trying to update adobe reader 10?

    Impossible to guess the "why" with so little information, but this may be helpful if you want to solve the problem: Error 1402 | Error 1406 | Acrobat, Reader

  • HT4759 Why do I get "  require iOS 5"  when I try updating my apps? How do I download it to my device?

    Why do I get "  require iOS 5"  when I try updating my apps? How do I download it to my device?

    See "update your device using iTunes" here: http://support.apple.com/kb/HT4623.

  • UFT 12 doesn't support Adobe Acroforms. When is the updated APTT plug-in going to be released?

    UFT 12 doesn't support Adobe Acroforms. When is the updated APTT plug-in going to be released?

    Good morning ipodjockey,
    I had the opportunity to read your original post about the mifi 4510L and I see you have several questions about the functionality of the device. As you may know, we try to report any and all issues that customers may be experiencing with any device in our portfolio. I'm pleased to advise that as of 11/1, there has been a new software release for the mifi 4510L. This update provides several enhancements to the device, like connection improvements in 3G and 4G LTE areas. Below is a link to the website with information and instructions on how to complete the software update. 
    http://support.verizonwireless.com/system_update/mifi4510l.html
    Although the website says Coming Soon, you can click on Software Update Instructions (*PDF) to access the link to the software download. As far as new mifis launch dates & availability, here a link to stay in the know for on our upcoming products and services.
    https://email.vzwshop.com/servlet/formlink/f?NFOQU&SOURCEID=WEB_DGF_VZW_SUPPORTNAV
    Once you have completed the software update, please test the connectivity & reply with your findings. As always, we are available to assist you.
    Thank you...

  • HT5012 Why can't I log onto my online banking after updating my software

    Why can't I log into my online banking after updating my software on iphone5 and ipad

    In this case you would have to add this account in "Settings > Mail, Contacts, Calendars > iCloud" for email, calendars, contacts, reminders etc. After you have finished checking emails, etc. you can delete your account in the same way.

  • Why I can't buy thing from my game after updating my billing information as iut ask me to contact I tune service to complete the transaction ? Help!

    Why I can't buy thing from my game after updating my billing information as iut ask me to contact I tune service to complete the transaction ? Help!

    Go here:
    https://expresslane.apple.com/Issues.action
    Ask for assistance.

  • Why doesn't the result look right when comparing?

    Why doesn't the result look right even I used higlight execution to check true and false and found to be correct right?
    Attachments:
    comparenresult.zip ‏27 KB

    At first I was not sure what you were asking. After looking more closely, I think I can answer your question.
    First of all, you need to initialize your shift register. This is the array of Boolean results. The first time through it works OK, but subsequent runs are also added on instead of replacing the results, even though you used a local to "clear" the array first.
    You are adding 2 to the iterations and indexing on the new number. This is a so that you skip the first two "bad" values. Therefore, you only have 13 data points and should only be running the FOR loop 13 times. Change the FOR loop count constant to 13 (or get the array size and subtract 2 and wire it in if the number of tests is variable).
    Also, there is an 'In Range a
    nd Coerce' node that will perform the two tests and the AND all in one node. This was not an error, of course, but it does make it a bit easier to read.
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]
    Attachments:
    fixed_test4a.vi ‏73 KB

  • [SOLVED] aterm and auto-scroll-down when typing

    I've been using aterm for a while now, and before that urxvt.
    What bothers me about aterm that I was very used to in urxvt was that, when you have scrolled up a bit, it doesn't jump to the bottom when you start typing.
    Is there any way for aterm to behave like this?
    Solved: I just found out about the scrollTtyOutput and scrollTtyKeypress options for .Xdefaults
    Last edited by Gilneas (2007-08-01 20:18:21)

    Hi jzola and welcome to the BlackBerry Support Community Forums!
    Does this only occur when typing SMS messages or does it occur with BBM messages as well?
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Since updating to 18.0 for mac, my scrollbar has been distorting when scrolling; started ~2 days after updating.

    The odd thing is that it is an on and off issue, meaning that sometimes the scrollbar distorts when scrolling, and sometimes it doesn't, and it started doing this about 2 days after updating. It didn't start immediately, which I find kind of odd. Is this just a graphical glitch? I'm pretty sure it is. I'm using Snow Leopard 10.6.3.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Why don't I get google results when typing keyword into the location bar?

    When typing keywords into the location bar, instead of taking me to Google I get a "problem loading page the connection was reset" error. And the domain it automatically takes me to is domainnotfound.Internetserviceprovider.net. Is there any way that if I don't type in a full url and just press enter it will give me the google results for those keywords? thank you for the assistance

    Sounds that your ISP is detecting whether a DNS look up fails in redirect you to that optimum.net url.
    In such a case you need to contact your ISP and ask them for alternative DNS servers that do not redirect you or you can set other DNS servers yourself.
    *http://kb.mozillazine.org/Error_loading_websites#DNS

  • HT4623 Why doesn't my I phone 4 have a software update option in the general settings?

    I have an I phone 4 with a 4.2.7 ios. Why isn't anything in my general settings that says software update?

    That option comes after updating to iOS 5 or later via iTunes.
    Install iTunes 10.7 on your computer and update your iPhone via iTunes.

  • Why did I lose all my Verizon ring tones after updating to new software?

    Why did. I lose all my Verizon ring tones after updating to new software?  Always worked before, now they are gone!  Contacted Verizon, who could not explain. 

    I was having a similar problem and here's what solved it for me: Under Settings>Notes the default account was changed from iCloud to another account for no apparent reason when I upgraded to iOS 7.  When I changed it back to iCloud, my notes started appearing on all devices again.  You might also want to check the Accounts setting under the Notes app to make sure All Notes is checked to retreive notes from all accounts.  Similarly, Settings>Mail,Contacts,Calendars has a default account that should match as well.  Good luck.
    -Brad

Maybe you are looking for