Why doesn't Shift+Drag scale a pic proportionally?

What is this? Shift + Drag doesn't scale a picture proportionally?
In every other Adobe application, combining Shift and Dragging scales a picture proportionally.
OK, then, so how DO I scale a picture proportionally?
(Muse 2014, OSX)
Thanks-
(EDIT)
OMG - Now I see. if I DON'T hold the Shift key, the picture scales proportionally. What planet am I on? Who at Adobe thought re-writing this universally accepted standard should be reversed in Muse?

This should have been done in every application a long time ago!
Normally scaling proportionally is the first choice. I can't remember, when I have willingly scaled an image unproportionally. And why using modifier keys for standard and no modifier for exceptions?
I assume, this is the way, Muse engineers are thinking.

Similar Messages

Why doesn't the 4th generation iPad do panaramic pictures.

Why doesn't the iPad 4 take pics like the iPhone 5 with panoramic pictures.

Apple has never said, but a common presumption is that, when they thought about the panorama feature, they thought for handheld devices, the iPhone (can't recall if it's on the touch or not). When you think of a handy video camera, you think of smaller devices, not something bulky like an iPad. Although I will say I've been in national parks and Disneyland and saw plenty of people using their iPads as their cameras.
They probably used the same premise as they did with the Passbook app....who needs a 'handy virtual ticket' app on a bulky device like an iPad?

Why doesn't the original document I'm dragging and dropping from one folder to another move?

Why doesn't the original document I'm dragging and dropping from one folder to another move?
What's happening is the computer is creating a duplicte of the document and placing it in the new location with a new creation date. The original document I wanted to drag and drop into a new location remains where it started as the "original" document and the new copy has this little arrow protruding up from the lower left of its icon.
At first I thought it was an alias, but it's a copy of the document I thought I was dragging and dropping.
What gives here?
Steve

That arrow indicates it is a linik to the original, though. This happens if you wish to drag files, for which you do not have permissions to do this operation, e.g. from Library or System folder. I am pretty sure you do not accomplish this operation from/to folders like Desktop or Documents; if so, there is a problem with your system.

Why doesn't my pictures on my PC upload to my Ipad and Iphone. Seems I have all my settings correct but none of my pictures are not showing up.

Why doesn't my pictures show up on my Ipad and Iphone? I have my pictures in the photostream upload folder but they do not seem to be uploading.
Thanks.

You will notice that in "My Pictures" folder you have a new folder called photostream. In photostream folder you will have another folder called "Upload" Anything you put in the "upload" folder will go to your phone and ipad. So just copy pics you want into that folder and they will go into photostream. I would not suggest moving them since I am not sure how it works on windows but there is a chance photostream might empty out the folder after 30 days.
On mac it automatically saves originals..

Why doesn't Personal.xlsb start when opening a different SS

I have my personal.xlsb installed in the following folder;
C:\Users\Toni Chaffin\AppData\Roaming\Microsoft\Excel\XLSTART
Why when I open a already completed WorkBook, say stats.xlsm why doesn't my personal workbook open so I can run macros that I have saved in there
Thanks
Toni Chaffin aka Talisa

I am experiencing the same exact issue. Running Office 2010 and whenever I open an xlsm file by double clicking on it in Windows Explorer, it opens in Excel but the macros do not open. If I open the VBA editor, only the current document is shown in there
and not the macros.
Opening Excel first and then dragging the spreadsheet file from Windows Explorer into Excel does work, and while the answers here are workarounds, they are far from solutions and are a very cumbersome workaround when dealing with multiple files.
Can anyone help with a proper solution to the issue? I've tried adding my XLSTART folder to the "At startup, open all files in:" setting in the Advanced options menu, and that has done nothing.
Thanks,
Mike

Why doesn't the keyboard display lower case when this is selected?

Why doesn't the keyboard display lower case characters when these are selected?

The same reason physical keyboards have capital letters, easier to read. If the iPad keyboard is in caps you'd know because the Shift key would be colored blue.

I have imovie and my files (movies) open. Why can't I drag the clips into iMovies?

I have imovie and my files (movies) open.
Why can't I drag my clips into imovie?

Drag and drop doesn't work - instead do a File -> import -> movies and select from there.

Why doesn't the "zoom in/out" via pinching the trackpad on my mac not work anymore with firefox? It worked before and still works with Safari.

why doesn't the "zoom in/out" feature by pinching the trackpad on my mac work anymore with firefox? It worked about a month ago, and still works on Safari.

Some gestures have been removed in Firefox 4 and later.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

Why don't still images scale to fit the safe areas of the frame?

Why doesn't Encore offer offer more flexibility for scaling images in slideshows. Yeah, I know it's very cool that it does a scale, but I want everybody who watches my dvd to be able to see ALL of my image. For those who own standard televisions, they won't be able to see the whole image unless I pan and zoom, and even then I have to time the pan correctly.
Programmers, please add a feature so that users have more control over scaling.
Thanks,
Laz!

Said this dozens of times, and will doubtless say it dozens of times more.
There are 2 issues at play here.
1 - Encore is an authoring app, not an editor, and as such it is down to you to prepare your assets correctly.
2 - a standard TV will always crop the images - they overscan. the same image in a progressive scan system will display fully.
So, what you need to do is decide what you need to create your images at, and if you use Photoshop, After Effects or Premiere, then you can use the title safe/Action safe overlays to scale things yourself.
It has to be done this way, as not all TV sets overscan to the same degree - as I just said, Progressive Scan systems and LCD/Plasma screens don't overscan at all.
This is what the safe areas are for.

Option-Shift Drag sets position to 1 1 1 1: Bug or feature?

When I option-shift drag on a region's position in the Event List, it sets the position to 1 1 1 1. Just curious if this is a bug or a feature? Despite the fact that I have found a use for this, it doesn't make a whole lot of sense for Logic to act this way. Thanks.
-Ben

Well it looks like your exact problem is listed on that incompatibility list:
JDBC - As of 5.0, comparing a java.sql.Timestamp to a java.util.Date by invoking compareTo on the Timestamp results in a ClassCastException. For example, the following code successfully compares a Timestamp and Date in 1.4.2, but fails with an exception in 5.0:
aTimeStamp.compareTo(aDate) //NO LONGER WORKS
This change affects even pre-compiled code, resulting in a binary compatibility problem where compiled code that used to run under earlier releases fails in 5.0. We expect to fix this problem in a future release.
For more information, see bug 5103041.
Michael Bishop

Why can't i drag songs onto my phone from my library

why can't i drag songs onto my phone from my library? Other people in my family can do it but it doesn't work for me.

You likely do not have Manually manage music selected

When I right click to save a picture why doesn't the box come up to choose where to put it?

When I right click to save a picture why doesn't the box come up to choose where to put it?
Or if I'm trying to upload a pic to a site say for instance a job site and trying to upload a resume and when I click on the button nothing happens.
This is very frustrating when I have a lot of time invested on the site I'm on and can't upload.

Ahh.. :)
A-Go to upper left corner and select preferences. In general tab,there is an option to ask everytime whenever you are going to put your downloading files.
B-Update your browser and reset it.Might be you are unable to upload because of viruses too. So make sure to scan your pc by a good antivirus. Okay? :)
Thank you for asking a question
Always at your service.
Mozilla.

Why doesn't the result look right when comparing?

Why doesn't the result look right even I used higlight execution to check true and false and found to be correct right?
Attachments:
comparenresult.zip ‏27 KB

At first I was not sure what you were asking. After looking more closely, I think I can answer your question.
First of all, you need to initialize your shift register. This is the array of Boolean results. The first time through it works OK, but subsequent runs are also added on instead of replacing the results, even though you used a local to "clear" the array first.
You are adding 2 to the iterations and indexing on the new number. This is a so that you skip the first two "bad" values. Therefore, you only have 13 data points and should only be running the FOR loop 13 times. Change the FOR loop count constant to 13 (or get the array size and subtract 2 and wire it in if the number of tests is variable).
Also, there is an 'In Range a
nd Coerce' node that will perform the two tests and the AND all in one node. This was not an error, of course, but it does make it a bit easier to read.
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]
Attachments:
fixed_test4a.vi ‏73 KB

Why doesn't SSRS like an IF Statement in my SQL Stored Procedure???

I have multiple IF Statements at the end of my SQL Stored Procedure Process that utilizes a @ReportTypeName Parameter to produce the chosen report result set
IF @ReportTypeName = 'HMO-POS New To HFHP - No Prior Year Member Spans'
BEGIN
SELECT DISTINCT
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Member Contract Nbr],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Member Subscriber Member Nbr],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Pkg],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Division Nbr],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER EFF DATE],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER FIRST NAME],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER LAST NAME],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Broker Name],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER ADDRESS 1],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER CITY],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER STATE],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER ZIPCODE],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE1],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE2],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE3],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER EMAIL],
CONVERT(VARCHAR,CAST(CONVERT(VARCHAR, [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER YMDBIRTH]) AS DATETIME),101) AS [INDV MEMBER BirthDate],
FLOOR((CAST (GETDATE() AS INTEGER) - CAST(CONVERT(DATETIME, CONVERT(CHAR(8), [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER YMDBIRTH])) AS INTEGER)) / 365.25) AS [INDV MEMBER AGE]
FROM [#TempTable_Distinct_Individual_Member_All_Info]
WHERE (CHARINDEX('HMO',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0
OR CHARINDEX('POS',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0)
AND [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR] NOT IN
(SELECT [#TempTable_Distinct_Individual_Member_Prior_Year_Spans].[INDV MEMBER NBR]
FROM [#TempTable_Distinct_Individual_Member_Prior_Year_Spans])
ORDER BY [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR]
END
IF @ReportTypeName = 'HMO-POS Renewals'
BEGIN
SELECT DISTINCT
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Member Contract Nbr],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Member Subscriber Member Nbr],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Pkg],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Division Nbr],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER EFF DATE],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER FIRST NAME],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER LAST NAME],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV Broker Name],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER ADDRESS 1],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER CITY],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER STATE],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER ZIPCODE],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE1],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE2],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER PHONE3],
[#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER EMAIL],
CONVERT(VARCHAR,CAST(CONVERT(VARCHAR, [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER YMDBIRTH]) AS DATETIME),101) AS [INDV MEMBER BirthDate],
FLOOR((CAST (GETDATE() AS INTEGER) - CAST(CONVERT(DATETIME, CONVERT(CHAR(8), [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER YMDBIRTH])) AS INTEGER)) / 365.25) AS [INDV MEMBER AGE]
FROM [#TempTable_Distinct_Individual_Member_All_Info]
INNER JOIN [#TempTable_Distinct_Individual_Member_Prior_Year_Spans]
ON [#TempTable_Distinct_Individual_Member_Prior_Year_Spans].[INDV MEMBER NBR] = [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR]
WHERE (CHARINDEX('HMO',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0
OR CHARINDEX('POS',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0)
ORDER BY [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR]
END
Microsoft Visual Studio and SQL Server Reporting Services did not like this! When I added my dataset and parameters accordingly, my Dataset had no fields...almost as if running the Stored Procedure in the background to get its Metadata was not working. I
know this works because I tested it as a result of a straight EXEC Command. Why doesn't Microsoft Visual Studio and SQL Server Reporting Services not like this IF? I did end up getting around this by parameterizing the WHERE clause based on the @ReportTypeName
chosen.
WHERE (@ReportTypeName = 'HMO-POS New To HFHP - No Prior Year Member Spans'
AND (CHARINDEX('HMO',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0
OR CHARINDEX('POS',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0)
AND [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR] NOT IN
(SELECT [#TempTable_Distinct_Individual_Member_Prior_Year_Spans].[INDV MEMBER NBR]
FROM [#TempTable_Distinct_Individual_Member_Prior_Year_Spans]))
OR (@ReportTypeName = 'HMO-POS Renewals'
AND (CHARINDEX('HMO',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0
OR CHARINDEX('POS',LTRIM(RTRIM([#TempTable_Distinct_Individual_Member_All_Info].[INDV Benefit Plan Name])),1) > 0)
AND [#TempTable_Distinct_Individual_Member_All_Info].[INDV MEMBER NBR] IN
(SELECT [#TempTable_Distinct_Individual_Member_Prior_Year_Spans].[INDV MEMBER NBR]
FROM [#TempTable_Distinct_Individual_Member_Prior_Year_Spans]))
I appreciate your review and am hopeful for a reply.
Thanks!

Hi ITBobbyP,
I have tested on my local environment and can reproduce the issue, the issue can be caused by the temp table you are using which will also cause the data not display.
I have use below sample table and record to have a test and details information below for your reference:
Right click the DataSet to select the "DataSet Properties" and click the query designer to execute the stored procedure by click the "!" to check if you can get the data:
If you got some error, the issue can be cause by the temp table invalid, so please make sure you have add the query to create and insert recored to temp table like below:
CREATE PROCEDURE vickytest0311_1
@ReportTypeName nvarchar(50)
AS
create table #VickyTest
column1 int,
column2 varchar(20)
insert into #VickyTest values (1,'Test1')
insert into #VickyTest values (2,'Test2')
insert into #VickyTest values (3,'Test3')
IF @ReportTypeName ='Test1'
BEGIN
select * from #VickyTest
where Column1=1
END
IF @ReportTypeName ='Test2'
BEGIN
select * from #VickyTest
where Column1=2
END
GO
3. I recommend you to not use the temp table and you will not need to add the create and insert statement in the stored procedure.
4. If you still got no data, please try to click the "Refresh fields" as below:
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Why doesn't my whole iTunes music library show up on Apple TV? Only songs I have purchased or downloaded show up

Why doesn't my whole iTunes music library show up on Apple TV? Home sharing is on on all devices.

nevermind, i had automatic graphics switching check off. i removed the check mark and then went into about my mac and voila there was the amd card. Figured i'd post what i found in case anyone else was looking for an answer.

Why doesn't Shift+Drag scale a pic proportionally?

Similar Messages

Maybe you are looking for