Why doesn't the Discussions index link to Developer Discussions?

I found it confusing that
Apple.com > Support > Discussions
http://discussions.apple.com/index.jspa?categoryID=1
had no link to:
Apple.com > Support > Discussions > Developer Forums > Developer
http://discussions.apple.com/forum.jspa?forumID=727&start=0
Could one be added?

it does through http://discussions.apple.com/category.jspa?categoryID=162

Similar Messages

  • Adobe, Why doesn't the download link for FreeHand work???!!!!!!

    Adobe, Why doesn't the download link for FreeHand work???!!!!!!

    Right! I tried the trial download links and nothing happens: http://www.adobe.com/cfusion/tdrc/index.cfm?loc=en&product=freehand
    The download links are working for other discontinued programs like Pagemaker and GoLive but I see that this page officially made FreeHand no longer for purchase.
    Discontinued products

  • Why doesn't the new flash player I downloaded work on my mac?

    Hi,
    I download the last new flash player on my mac under Lion and I can't open some website like adobe websites

    Hi Sunil,
    I try http://www.adobe.com/software/flash/about/ and the file attach is the result: a white page.
    I uninstall it yesterday and download the last version on adobe
    it's on firefox, I can use safari but I need to reload many time to have something
    Le 27 sept. 2011 à 13:09, Sunil_Bhaskaran a écrit :
    Re: Why doesn't the new flash player I downloaded work on my mac?
    created by Sunil_Bhaskaran in Flash Player - View the full discussion
    After downloading, you need to run the installer.
    Could you please visit this site: http://www.adobe.com/software/flash/about/
    If Flash Player is installed in your machine, it will give you the version number.
    In the following link, you have step-by-step instructions on installing Flash Player on Mac:
    http://kb2.adobe.com/cps/908/cpsid_90893.html
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3940045#3940045
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3940045#3940045. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Flash Player by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Why doesn't the iPad have a guest screen like the PC for extra security?

    I just want to start off first by saying I just purchased my iPad about six months ago and I'm really enjoying it,but if you're like me,I believe in protecting my privacy.
    I don't like to turn down any of friends or coworkers when I'm asked to use my iPad,but when you have such things as your personal pictures,movies,music,business documents,etc...you'd like to keep them from prying eyes. I thought that with the new iOS 7 update,that issue would've been fixed, but I was wrong. I'm hoping Apple would correct this problem with the next iOS update,it would make a lot of loyal Apple consumers & anyone who's new to purchasing the iPad for the first time very happy to know that feature is available.
    Why doesn't the iPad offer a guest screen?

    Tell Apple at the link below.
    http://www.apple.com/feedback/ipad.html

  • Why doesn't the CC app work properly?

    I've been using Creative Cloud for some time now and am really loving it, however I must say it is a source of annoyance that the Creative Cloud app just doesn't work properly.
    Firstly, I used it initially to download all my apps, then after an update those apps no longer appeared in the "Apps" list. Now only those that have been installed since that update appear in this list. Why doesn't the "Apps" list display all of the Adobe CC apps that I have installed on my computer?
    Why does it keep reinstalling fonts? I'm always getting "Lush Script Regular" and other fonts being added.
    It regularly comes up telling me that Dreamweaver and Premiere Pro need to be updated, but always I get an error, then the update request disappears.
    I'm regularly getting 4 files that it can't sync - even though they are the same files as others in the folder. If nothing else, why can't I say "Great, got the message". Also, why is the error message just "due to server error" with no advice on how to resolve it? Why is there a server error on only these 4 files?
    It seems to me there are still some teething issues with the CC app, but what I don't understand is why they aren't being resolved much faster, given that this is the portal to the service.
    Of course, given Adobe I doubt I'll get satisfactory answers – a little jaded with their responses. Anyway, thought I'd at least post the questions.  

    Questapo I am sorry you have been facing difficulties with your Creative Cloud experience.  I don't believe it will be possible to address all of your concerns in one discussion.  I would not be surprised if at least three of the issues are related to the same root cause.
    First in order for the applications to be visible are you regularly needing to delete the OPM.db file?  You can find this listed as solution 2 in CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

  • Why doesn't the iPhone 5 have the call bar feature like the 4S does?

    Why doesn't the iPhone 5 have the call bar feature like the 4S does?

    From the Swype website:
    Why isn’t Swype available for iPhone/iPad/BlackBerry/Windows Phone?
    Due to the technical design of some operating systems, it is not possible for third party keyboards (such as Swype) to be offered at this point in time. Please communicate to your device/OS manufacturer that you’d like to see Swype available as a keyboard option!
    Here is the link:
    http://www.swype.com/about/swype-faq-3/
    Cheers,
    GB

  • A message is marked as unread - so why doesn't the Inbox count show it?

    There is a message marked as unread (the little blue ball) in an IMAP account's inbox.
    So why doesn't the Inbox show a (1) next to it to indicate there are unread messages?
    doug

    Thanks for your replies, people.
    I actually just created this IMAP account about a week ago.
    Yesterday I deleted a separate, POP3 account and recreated it as IMAP. At that time everything got re-indexed (at least the activity window was going on forever about rebuilding and reindexing this and that).
    Rebuilding from the Mail menu doesn't help.
    I might try removing and re-adding the IMAP account or the entire re-index later if I find this behavior annoys me too much. Will that lose my replied-to indicators?
    So anyway, what I am seeing is not normal? If you go to a message and mark it "unread" does your Inbox for that account go up by 1?
    Thanks,
    doug

  • Why doesn't the Calendar allow one to schedule the last Friday of each month?

    Why doesn't the Calendar allow for making repeating appts. like the 1st Saturday of each month or the last Friday of each month?  This is such fundamental functionality. Virtually all other third-party calendar apps include this feature. I was very disappointed this wasn't addressed in iOS 5.  Hopefully an Apple Support person sees this...  

    Apple support people don't participate here. You can leave feedback for any feature that you want to see included in an update via this link.
    http://www.apple.com/feedback/ipad.html

  • Why doesn't the camera kit I bought fit into my iPad dock?

    Why doesn't the camera kit I bought fit into my iPad dock?

    Maybe you purchased the wrong item.
    iPads that have the 25 pin connector use the original Camera Connection Kit. That kit has two parts and adapter to allow you to insert SD cards and a second adapter to connect a USB cord from your camera. Here's a link to that kit:
    http://store.apple.com/us/product/MC531ZM/A/apple-ipad-camera-connection-kit?fno de=3a
    Newer iPads have the Lightning connector. You have two choices for those iPads. If you want to read SD card purchase a Lightning to SD Card Camera Reader.
    http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader?f node=3a
    Or you can connect your iPad directly to your camera with a Lightning to USB Camera Adapter.
    http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter?fnod e=3a

  • Why doesn't the result look right when comparing?

    Why doesn't the result look right even I used higlight execution to check true and false and found to be correct right?
    Attachments:
    comparenresult.zip ‏27 KB

    At first I was not sure what you were asking. After looking more closely, I think I can answer your question.
    First of all, you need to initialize your shift register. This is the array of Boolean results. The first time through it works OK, but subsequent runs are also added on instead of replacing the results, even though you used a local to "clear" the array first.
    You are adding 2 to the iterations and indexing on the new number. This is a so that you skip the first two "bad" values. Therefore, you only have 13 data points and should only be running the FOR loop 13 times. Change the FOR loop count constant to 13 (or get the array size and subtract 2 and wire it in if the number of tests is variable).
    Also, there is an 'In Range a
    nd Coerce' node that will perform the two tests and the AND all in one node. This was not an error, of course, but it does make it a bit easier to read.
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]
    Attachments:
    fixed_test4a.vi ‏73 KB

  • Why doesn't the video app display libraries with filters?

    Why doesn't the video app display my shared video library like the music app does music? ie. no genre, tv show title. Or how about how displaying them like when i.m using the remote app on my apple tv? Either one of these two interfaces is better than loading four hundred thumbnails. The video app is useless when I want to choose a move from my shared library. If apple wants me to buy movies and tv shows from the iTunes store they should give me a better way to choose them from my library,

    Hi,
    You can also set the iPhone number by adding the Apple ID to the iPhone.
    This links the iPhone Number to the Apple ID.
    Soon afterwards a pop up messages will appear on the Mac saying the iPhone is using it's Number and the Apple ID (if it has not appeared in five minuted restart Messages)
    Accepting add the phone number to Messages as a "Send From" and Receive option.
    On both the iPhone and the Mac version of Messages you can then chose the "Send From " ID or iPhone number.
    8:50 PM      Monday; April 8, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Why Doesn't the XIRR function work?

    In Excel if you have 5 records from a1:b5 then XIRR looks like this:
    XIRR(A1:A5, B1:B5) you get a nice neat answer like .35
    Here is a version that works in Crystal that would require manual entry of any new quarters numbers and dates-- and if you plug this into Crystal it works:
    (XIRR([1000000,-100000,-100000,-100000,-100000,10277.49,-100000], [DateValue(1999,2,1),DateValue(1999,3,1),DateValue(1999,6,1), DateValue(1999,12,1),DateValue(2000,3,1),DateValue(2000,6,1),DateValue(2000,9,1)]))*.100
    You do get a nice answer of something like .035.  But this is all done manually and I need it to function automatically when the report is refreshed.
    So you have a range for the currency and a range for the date fields. I need to simulate this in crystal. Crystal has an XIRR function, and with the arrays, I should be able to fill in the range, but am having difficulty getting it to work.
    After building the arrays, I made another formula to combine the arrays in the XIRR formula.
    I am down to this error now after getting this formula this far  --
    "Numerical method did not converge; try another value for guess."
    Here's where I am with the formula, although they don't want to use the guess part of the XIRR function - they just want to use the XIRR(number/currency, date).  Maybe you could pass this on too?:
    /{@Reset} for the group header (NOT using a repeated group header):
    whileprintingrecords;
    numbervar array x := 0;
    datevar array y := date(0,0,0);
    numbervar i := 0;
    numbervar j := 0;
    //{@accum} for the detail section:
    whileprintingrecords;
    numbervar array x;
    datevar array y;
    numbervar i := i + 1;
    numbervar j := count({table.groupfield},{table.groupfield});
    if i <= j then (
    redim preserve x[j];
    redim preserve y[j];
    x<i> := tonumber({table.currency});
    y<i> := datevalue({table.datetime})
    //{@xirr calc} to be placed in the group footer:
    whileprintingrecords;
    numbervar array x;
    datevar array y;
    xirr(x,y)
    The array works correctly.  So why do I get that error and why doesn't the XIRR formula work like they say it should?  Has anyone used this successfully in Crystal--maybe you could shed some light?
    Thanks!

    Hi,
    I am receiving that same error when the last item in the array is 0, otherwise all works perfectly.
    When I run the same group of numbers and dates in Excel it returns without issue.
    -265500.00,-690000.00,-570000.00,16814.25,-855000.00,-619500.00,55293.46,30411.40,15183.76,  0.00
    01-25-2007,03-06-2007,05-02-2007,06-29-2007,08-01-2007,08-24-2007,09-17-2007,03-14-2008,05-28-2008,03-31-2010
    =XIRR(A2:J2,A1:J1,-0.1)
    Is there a known bug in Crystal's XIRR function when the last value is 0? 
    Or a hot-fix that will repair this?
    Thanks in advance,
    Gary
    PS. I am using Crystal XI Product Version: 11.0.0.2495

  • Why doesn't the location information in an iCal meeting show up on my iPhone, when it does show up in iCal?

    Why doesn't the location information show up on my iPhone 4S calendar when I accept an invitation to a meeting?
    The other information such as the date, time and invitees all show up on the iPhone, while in iCal all the information including the Location field is showing up.

    If it won't charge you probably need to try a different dock to usb cable.  More information on troubshooting this is available here:  http://support.apple.com/kb/TS1591.

  • Why doesn't the weather icon display the current temperature in your "local" city?

    Why doesn't the current temperature display in the weather icon on the home screen?

    The application works and I do have location-based services on. I'm just wondering why the icon itself does not show the current temperature. Sort of how they upgraded the clock after show the current time.

  • Why doesn't the "back" button work all the time in Safari?

    Why doesn't the "back" button work all the time in Safari?

    thanks for the reply. You prompted me to check and I realised it wasn't installed on my test laptop and opening in Microsoft Reader. I've installed it now and it works.
    My next challenge is to prevent the mailto: command opening Microsoft Mail instead of Outlook, but I guess every user will have a different default.
    Thank you

Maybe you are looking for