Why doesn't the IMAQ WindTools display properly in exe?

I'm using the IMAQ Wind Tools in LabVIEW and I'm noticing an odd behavior.  The IMAQ Wind Tools do not get displayed properly when using an exe (they work fine in the LV environment).  In the exe the Wind Tools window is just a title bar that shows up at the bottom left of the screen even though I specified tools to display.
Attached is an example demonstrating the issue.  (Windows 7, LabVIEW 2011 SP1, IMAQ 4.6.1)
Is this a bug in LV or in my code?
Thanks,
Bruce
Attachments:
IMAQ Tools Test.zip ‏223 KB

I took your project and was able to recreate the issue. This might be a bug, but is there a specific reason you need to run it from the Build Spec itself? Running from the executable is probably a safer debugging technique anyways. Either way, thanks for pointing this out.
Ravi A.
National Instruments | Applications Engineer

Similar Messages

  • Why doesn't the scatter graph display properly??

    Hi,
    I've already posted a thread regarding scatter graph
    but nobody (not even from Macromedia!) has been able to give me
    an answer and I've been trying on my own since then, but to no
    avail!
    I refer to WhazzInAName said on Dec 31, 2004 at 9:51 AM on
    Cfchart
    Livedocs
    I copied only the scatter graph part, pasted it in a CFM page
    and run it. It displayed fine.
    However, if I try to add more than 1 value for a particular
    chartdata item, e..g.
    <cfchartdata item="25" value="99.357">
    <cfchartdata item="25" value="90">
    <cfchartdata item="25" value="65">
    The graph only displays the value 65, but not the other 2!
    I tried plotting the same values in an Excel chart and there
    was no problem at all. All points displayed correctly!!!
    What's wrong with this cfchart?? Why isn't it displaying the
    other 2 values???
    Also, there is no possibility with the chart in Report
    Builder to specify sortxaxis="yes" xaxistype="scale"
    yaxistype="scale", or is it available somewhere?
    Thanks and regards,
    Yogesh Mahadnac

    Hi Ted,
    Thanks for replying.
    Too bad CF Report Builder can't handle such issues.
    Hope it's going to be
    MUCH BETTER with CF8?
    Thanks and regards,
    Yogesh Mahadnac

  • Why doesn't the CC app work properly?

    I've been using Creative Cloud for some time now and am really loving it, however I must say it is a source of annoyance that the Creative Cloud app just doesn't work properly.
    Firstly, I used it initially to download all my apps, then after an update those apps no longer appeared in the "Apps" list. Now only those that have been installed since that update appear in this list. Why doesn't the "Apps" list display all of the Adobe CC apps that I have installed on my computer?
    Why does it keep reinstalling fonts? I'm always getting "Lush Script Regular" and other fonts being added.
    It regularly comes up telling me that Dreamweaver and Premiere Pro need to be updated, but always I get an error, then the update request disappears.
    I'm regularly getting 4 files that it can't sync - even though they are the same files as others in the folder. If nothing else, why can't I say "Great, got the message". Also, why is the error message just "due to server error" with no advice on how to resolve it? Why is there a server error on only these 4 files?
    It seems to me there are still some teething issues with the CC app, but what I don't understand is why they aren't being resolved much faster, given that this is the portal to the service.
    Of course, given Adobe I doubt I'll get satisfactory answers – a little jaded with their responses. Anyway, thought I'd at least post the questions.  

    Questapo I am sorry you have been facing difficulties with your Creative Cloud experience.  I don't believe it will be possible to address all of your concerns in one discussion.  I would not be surprised if at least three of the issues are related to the same root cause.
    First in order for the applications to be visible are you regularly needing to delete the OPM.db file?  You can find this listed as solution 2 in CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

  • Why doesn't the weather icon display the current temperature in your "local" city?

    Why doesn't the current temperature display in the weather icon on the home screen?

    The application works and I do have location-based services on. I'm just wondering why the icon itself does not show the current temperature. Sort of how they upgraded the clock after show the current time.

  • Why doesn't the video app display libraries with filters?

    Why doesn't the video app display my shared video library like the music app does music? ie. no genre, tv show title. Or how about how displaying them like when i.m using the remote app on my apple tv? Either one of these two interfaces is better than loading four hundred thumbnails. The video app is useless when I want to choose a move from my shared library. If apple wants me to buy movies and tv shows from the iTunes store they should give me a better way to choose them from my library,

    Hi,
    You can also set the iPhone number by adding the Apple ID to the iPhone.
    This links the iPhone Number to the Apple ID.
    Soon afterwards a pop up messages will appear on the Mac saying the iPhone is using it's Number and the Apple ID (if it has not appeared in five minuted restart Messages)
    Accepting add the phone number to Messages as a "Send From" and Receive option.
    On both the iPhone and the Mac version of Messages you can then chose the "Send From " ID or iPhone number.
    8:50 PM      Monday; April 8, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Why Doesn't The App Store Display Correctly on my MBP?

    Ever since OS updates were included in the App Store, I noticed that product icons never fully load on the storefront. I'm always having to reload the page to get everything to display properly and sometimes that doesn't work! Hey, Apple... fix your store or I'll be using my Windows 7 Virtual Machine more often!
    The Mac App Store rating...

    It doesn't sound like an Apple issue but rather one about your user profile. 
    I have a few apple comptuers running the same OS, and they have no issue.  As the iApps store, is an internet store, other people in your area would also be having the same issue if it was the iApps store that was causing the problem. 
    Try some basic troubleshooting on your computer to see if it helps. 
    REPAIRING DISK PERMISSIONS -
    NOTE: refer to article "About Disk Utility's Repair Disk Permissions feature" found here http://support.apple.com/kb/ht1452 - for the actual apple article on these step. ----
    - click finder in the bottom dock, and in the window that opens, select applications in the left column - scroll through until you see the 'Utilities' folder and double click to open it.  Then double click on 'Disk Utility'
    - When prompted to select a disk volume or image, select the 'Macintosh HD' in the left column
    - ensure the the "first aid" tab is highlighted blue in the middle of the screen
    - click the button at the bottom that says 'Repair Disk Permissions'
    - this process will take a few minutes to run.  It will indicate it's done, by scrolling to the bottom of the "details area" displaying 'Permissions repair complete'
    REPAIRING DISK - About OS X Recovery - http://support.apple.com/kb/HT4718.
    - restart your computer hold down command + R keys on the keyboard to boot you into Lion / Mountain Lion Recovery mode
    - select english as your main language then the continue arrow
    - select "Disk Utility" on the resulting screen then 'Disk Utility' ---
    - When prompted to select a disk volume or image, select the 'Macintosh HD' in the left column
    - ensure the the "first aid" tab is highlighted blue in the middle of the screen
    - click the button at the bottom that says 'REPAIR DISK' .......NOT "Repair disk permissions"
    - this process will take a few minutes to run.  It will indicate it's done, by scrolling to the bottom of the "details area" displaying "The Macintosh HD appears OK"
    If you get any other message OTHER than "The Macintosh HD appears OK", like "the Macintosh HD was repaired successfully" run the "Disk Repair" again, until it displays  "The Macintosh HD appears OK".
    Once done, restart the computer as normal

  • Ios 7.0.3. WHY doesn't the whole screen fit properly. Display is cut

    The whole display screen doesn't fit properly on the new 7.0.3 update?! My screen keeps getting zoomed in and cut, and it keeps getting moved. My phone is slower too. NOT HAPPY
    <Edited by Host>

    is your zoom on? Try double tapping with three fingers on your screen, it should go back to normal and then go to settings>general>accessibility>zoom and disable it

  • Why doesn't the iPod classic sync properly, and how do I fix it?

    Notes
    Before anyone mentions the lame suggestion of "Restoring", let me add that I have done that. Alot.
    I'm pretty good with computers, so please get as nerdy as you want, just as long as you're only trying to help me.
    This disscussion should only be about this particular problem, please refrain from posting you're problems to this (Make your own discussion).
    If necessary, contact me via email if you need more information, or have other misc. questions or inqueries.
    Basic Information
    Product: iPod classic
    Serial Number: ******0YMV
    Model: MB147LL
    Version: 1.1.2 PC
    Capacity: 80GB
    Diagnostics
    Retracts: 14
    RealLocs: 4928
    Pending Sectors: 120
    PowerOn Hours: 443
    Start/Stops: 16585
    Temp: Current - 31c
    Temp: Min - 3c
    Temp: Max - 67c
    Additional Details
    The iPod works fine after immediate restoration, however, after adding 500 or so songs it seems to quit responding and appears to terminate communications with computer while freezing iTunes. After fiddling around I usually grow tired and unplug it and iTunes quickly displays a message saying to restore the iPod, although it's unplugged... This happens everytime, so it's not a rare situation for me. I've tried repeatedly on two Windows computers and a brand new Mac.

    It is hit or miss whether replacing the cameras will resolve the problem. I would first try taking it apart and then carefully disconnecting and reconnecting the camera cables.
    Since it both cameras it is likely not a problem with the logic board but still could be.

  • Why doesn't the assets page display my used and free storage?

    I know it's available on the desktop app, but that's not where I constantly have problems with deleting archived files and need to know those values.

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.

  • Why doesn't the keyboard display lower case when this is selected?

    Why doesn't the keyboard display lower case characters when these are selected?

    The same reason physical keyboards have capital letters, easier to read. If the iPad keyboard is in caps you'd know because the Shift key would be colored blue.

  • Why doesn't my iPhoto library sync properly to my iPhone/iPad?

    Why doesn't my iPhoto library sync properly to my iPhone and iPad? I have already tried deleting the iPod photo cache. I sync the entire iPhoto library, which includes about 8,000 photos. The Events and Albums never match up, with many missing photos in most albums and events.

    Thats is how I did it originally and tried it that way again but it never brings in my library.  Now it gives me a response saying it doesn't have correct permissions. I'm the only user on the iMac. I did recently move the library from my old iMac iPhoto with no trouble.

  • Why doesn't the slide present?

    Why doesn't the slide present, but the audio and highlighted areas do?

    Hi Lilybiri,
    I am using Captivate 6 and I have created a Software Presentation. When I am previewing the Project, I notice that the Audio, Highlighting, Mouse, and Typing display, but the slide doesn’t. I’ve tried starting the Audio, Highlighting, Mouse, and Typing after the slide is supposed to present, but that doesn’t seem to fix the problem. Notice the screen shot below. The Highlighted text field is presenting but that is actually on the next slide. If I had let the preview run a little longer, the typing in that text field would be seen as well.
    Here is what that slide looks like.  Notice that the Text and Highlighting are one second after the slide, but they are presenting before the slide.:
    I hope this helps.
    Thanks for any assistance you can provide.
    BNYM Ralph

  • Why doesn't the iPad have a guest screen like the PC for extra security?

    I just want to start off first by saying I just purchased my iPad about six months ago and I'm really enjoying it,but if you're like me,I believe in protecting my privacy.
    I don't like to turn down any of friends or coworkers when I'm asked to use my iPad,but when you have such things as your personal pictures,movies,music,business documents,etc...you'd like to keep them from prying eyes. I thought that with the new iOS 7 update,that issue would've been fixed, but I was wrong. I'm hoping Apple would correct this problem with the next iOS update,it would make a lot of loyal Apple consumers &amp; anyone who's new to purchasing the iPad for the first time very happy to know that feature is available.
    Why doesn't the iPad offer a guest screen?

    Tell Apple at the link below.
    http://www.apple.com/feedback/ipad.html

  • Why Doesn't the XIRR function work?

    In Excel if you have 5 records from a1:b5 then XIRR looks like this:
    XIRR(A1:A5, B1:B5) you get a nice neat answer like .35
    Here is a version that works in Crystal that would require manual entry of any new quarters numbers and dates-- and if you plug this into Crystal it works:
    (XIRR([1000000,-100000,-100000,-100000,-100000,10277.49,-100000], [DateValue(1999,2,1),DateValue(1999,3,1),DateValue(1999,6,1), DateValue(1999,12,1),DateValue(2000,3,1),DateValue(2000,6,1),DateValue(2000,9,1)]))*.100
    You do get a nice answer of something like .035.  But this is all done manually and I need it to function automatically when the report is refreshed.
    So you have a range for the currency and a range for the date fields. I need to simulate this in crystal. Crystal has an XIRR function, and with the arrays, I should be able to fill in the range, but am having difficulty getting it to work.
    After building the arrays, I made another formula to combine the arrays in the XIRR formula.
    I am down to this error now after getting this formula this far  --
    "Numerical method did not converge; try another value for guess."
    Here's where I am with the formula, although they don't want to use the guess part of the XIRR function - they just want to use the XIRR(number/currency, date).  Maybe you could pass this on too?:
    /{@Reset} for the group header (NOT using a repeated group header):
    whileprintingrecords;
    numbervar array x := 0;
    datevar array y := date(0,0,0);
    numbervar i := 0;
    numbervar j := 0;
    //{@accum} for the detail section:
    whileprintingrecords;
    numbervar array x;
    datevar array y;
    numbervar i := i + 1;
    numbervar j := count({table.groupfield},{table.groupfield});
    if i <= j then (
    redim preserve x[j];
    redim preserve y[j];
    x<i> := tonumber({table.currency});
    y<i> := datevalue({table.datetime})
    //{@xirr calc} to be placed in the group footer:
    whileprintingrecords;
    numbervar array x;
    datevar array y;
    xirr(x,y)
    The array works correctly.  So why do I get that error and why doesn't the XIRR formula work like they say it should?  Has anyone used this successfully in Crystal--maybe you could shed some light?
    Thanks!

    Hi,
    I am receiving that same error when the last item in the array is 0, otherwise all works perfectly.
    When I run the same group of numbers and dates in Excel it returns without issue.
    -265500.00,-690000.00,-570000.00,16814.25,-855000.00,-619500.00,55293.46,30411.40,15183.76,  0.00
    01-25-2007,03-06-2007,05-02-2007,06-29-2007,08-01-2007,08-24-2007,09-17-2007,03-14-2008,05-28-2008,03-31-2010
    =XIRR(A2:J2,A1:J1,-0.1)
    Is there a known bug in Crystal's XIRR function when the last value is 0? 
    Or a hot-fix that will repair this?
    Thanks in advance,
    Gary
    PS. I am using Crystal XI Product Version: 11.0.0.2495

  • Why doesn't the location information in an iCal meeting show up on my iPhone, when it does show up in iCal?

    Why doesn't the location information show up on my iPhone 4S calendar when I accept an invitation to a meeting?
    The other information such as the date, time and invitees all show up on the iPhone, while in iCal all the information including the Location field is showing up.

    If it won't charge you probably need to try a different dock to usb cable.  More information on troubshooting this is available here:  http://support.apple.com/kb/TS1591.

Maybe you are looking for