Why doesn't the 'Reanalyze' button work?

After accidentally syncing both the Upright Mode and the Upright Transforms (instead of just the mode) from 1 photo to approximately 200 other photos, I noticed something quite strange.
When selecting the 'Auto' upright mode on any of the other pictures, the transformation was done using data from the original photo.
When realising that I'd synced that transformation data across to a load of photos that it didn't apply to, I tried pressing the 'Reanalyze' button. This seems to have no effect - the images are still incorrectly transformed.
The only solution was to manually reset every synced photo to its imported state (although I suppose I could have undone the sync operation, but I only realised this after doing other changes). After doing this, the transformations work correctly.
Perhaps I have misunderstood what the button does, but if I have, then I can't see how you are meant to resolve this problem

Apple doesn't support web based email clients. Why not use the Mail app that's pre installeed on your Mac?

Similar Messages

  • Why doesn't the "back" button work all the time in Safari?

    Why doesn't the "back" button work all the time in Safari?

    thanks for the reply. You prompted me to check and I realised it wasn't installed on my test laptop and opening in Microsoft Reader. I've installed it now and it works.
    My next challenge is to prevent the mailto: command opening Microsoft Mail instead of Outlook, but I guess every user will have a different default.
    Thank you

  • Why Doesn't the XIRR function work?

    In Excel if you have 5 records from a1:b5 then XIRR looks like this:
    XIRR(A1:A5, B1:B5) you get a nice neat answer like .35
    Here is a version that works in Crystal that would require manual entry of any new quarters numbers and dates-- and if you plug this into Crystal it works:
    (XIRR([1000000,-100000,-100000,-100000,-100000,10277.49,-100000], [DateValue(1999,2,1),DateValue(1999,3,1),DateValue(1999,6,1), DateValue(1999,12,1),DateValue(2000,3,1),DateValue(2000,6,1),DateValue(2000,9,1)]))*.100
    You do get a nice answer of something like .035.  But this is all done manually and I need it to function automatically when the report is refreshed.
    So you have a range for the currency and a range for the date fields. I need to simulate this in crystal. Crystal has an XIRR function, and with the arrays, I should be able to fill in the range, but am having difficulty getting it to work.
    After building the arrays, I made another formula to combine the arrays in the XIRR formula.
    I am down to this error now after getting this formula this far  --
    "Numerical method did not converge; try another value for guess."
    Here's where I am with the formula, although they don't want to use the guess part of the XIRR function - they just want to use the XIRR(number/currency, date).  Maybe you could pass this on too?:
    /{@Reset} for the group header (NOT using a repeated group header):
    whileprintingrecords;
    numbervar array x := 0;
    datevar array y := date(0,0,0);
    numbervar i := 0;
    numbervar j := 0;
    //{@accum} for the detail section:
    whileprintingrecords;
    numbervar array x;
    datevar array y;
    numbervar i := i + 1;
    numbervar j := count({table.groupfield},{table.groupfield});
    if i <= j then (
    redim preserve x[j];
    redim preserve y[j];
    x<i> := tonumber({table.currency});
    y<i> := datevalue({table.datetime})
    //{@xirr calc} to be placed in the group footer:
    whileprintingrecords;
    numbervar array x;
    datevar array y;
    xirr(x,y)
    The array works correctly.  So why do I get that error and why doesn't the XIRR formula work like they say it should?  Has anyone used this successfully in Crystal--maybe you could shed some light?
    Thanks!

    Hi,
    I am receiving that same error when the last item in the array is 0, otherwise all works perfectly.
    When I run the same group of numbers and dates in Excel it returns without issue.
    -265500.00,-690000.00,-570000.00,16814.25,-855000.00,-619500.00,55293.46,30411.40,15183.76,  0.00
    01-25-2007,03-06-2007,05-02-2007,06-29-2007,08-01-2007,08-24-2007,09-17-2007,03-14-2008,05-28-2008,03-31-2010
    =XIRR(A2:J2,A1:J1,-0.1)
    Is there a known bug in Crystal's XIRR function when the last value is 0? 
    Or a hot-fix that will repair this?
    Thanks in advance,
    Gary
    PS. I am using Crystal XI Product Version: 11.0.0.2495

  • Why doesn't the CC app work properly?

    I've been using Creative Cloud for some time now and am really loving it, however I must say it is a source of annoyance that the Creative Cloud app just doesn't work properly.
    Firstly, I used it initially to download all my apps, then after an update those apps no longer appeared in the "Apps" list. Now only those that have been installed since that update appear in this list. Why doesn't the "Apps" list display all of the Adobe CC apps that I have installed on my computer?
    Why does it keep reinstalling fonts? I'm always getting "Lush Script Regular" and other fonts being added.
    It regularly comes up telling me that Dreamweaver and Premiere Pro need to be updated, but always I get an error, then the update request disappears.
    I'm regularly getting 4 files that it can't sync - even though they are the same files as others in the folder. If nothing else, why can't I say "Great, got the message". Also, why is the error message just "due to server error" with no advice on how to resolve it? Why is there a server error on only these 4 files?
    It seems to me there are still some teething issues with the CC app, but what I don't understand is why they aren't being resolved much faster, given that this is the portal to the service.
    Of course, given Adobe I doubt I'll get satisfactory answers – a little jaded with their responses. Anyway, thought I'd at least post the questions.  

    Questapo I am sorry you have been facing difficulties with your Creative Cloud experience.  I don't believe it will be possible to address all of your concerns in one discussion.  I would not be surprised if at least three of the issues are related to the same root cause.
    First in order for the applications to be visible are you regularly needing to delete the OPM.db file?  You can find this listed as solution 2 in CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

  • Why doesn't the hold button on my Ipod work anymore?

    The hold button on my Ipod Nano 4th Generation no longer does anything so my ipod dies within hours.

    Then take the iPod Nano to an Apple store or an AASP.  Whichever is more convenient for you.

  • Why doesn't the Wi-Fi work on my IPod

    My IPod is connected to my wifi but it doesn't actually work.

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Why doesn't my home button work?

    I just recently exchanged my iphone for a brand new one, because the "home" button didn't work, unless I pressed a thousand times. So the Apple store exchanged it for me, took it home, updated it, and its doing the same thing!!!  Can ANYONE help me on this? Im about to throw this thing of the Zakim Bridge!!!!
    Dave

    I have been having the same issue with my home button for the last few weeks, and it's only getting worse. When you went to the Apple store, did they say what was causing it?  I don't have the extemded warrenty on mine, I never bought one.  Not sure if they'll be able to help me with mine or not.  But I came on here and was going to complain about the same issue, then I saw yours.  I googled it and it seems like it's becoming a common issue, but everyone seems to have a different opinion of why and how to fix it.  ANNOYING. 

  • Why doesn't the alt tag work in firefox to open a description of an image on mouseover

    In IE, when I roll my mosue over an image, it gives a tooltip description of the image contained in the html alt tag. Why doesn't this work in Firefox?

    The "alt" tag is meant to show text when the image isn't loaded, the "title" tag is meant for a description of an image on cursor hover. IE has been doing that wrong for many years, where Firefox follows W3C standards. A properly coded webpage should have both "alt" and "title" tags.

  • Why won't the home button work

    I just dropped my iphone for the first time. It didn't have an otter box, just a thin plastic cover. It landed on it's screen but shows no screen damage whatsoever. Now I can't use the home button. I can listen to my music and play games just fine, but when it comes to getting back to the home screen with the home button it doesn't work. It makes the usual clicking sound, but nothing else. I got it to the home screen a couple of times by pushing the button with alot of force but I'm affraid that will damage it more. What should I do? Is it fixable? Do I have to take it to be repaired or can I fix it at home?

    Sounds like you broke your phone.  Bringt it and $149 to the Apple store for an out of warranty replacement.

  • Why doesn't the import tool work in Thunderbird 24.7.0?

    Hello!
    I'm running Thunderbird 24.7.0, on Mageia Linux 4.1, with the KDE4 desktop. Thunderbird was installed from the Mageia repositories using their package manager, rpmdrake. I have many filters that I have created on earlier versions of Thunderbird, and wish to import them. However, when I go to the "tools" menu, and pick "import", and then choose the radio button to import "filters", I get a message: "Choose the file you would like to import", but below that, is only a blank white box. I cannot click on it to get a cursor, and the "next" button is grayed-out and non-functional. Only the "back" and "cancel" buttons work.
    The filters I wish to import are simple text files, created in Thunderbird, and saved to back-up. It appears that perhaps the UI is breaking at the point where it should let me browse for files to import. Is this possibly something that has gone wrong with the Mageia build of Thunderbird? -Or is this a common issue? -And is there a fix for it? Thank you!

    import only imports third party mail clients. It does not transfer profile data or parts of it from installation to installation.
    Simply copy the msgfilterrules.dat file yourself

  • Why doesn't the back button have a dropdown to jump back multiple levels in Firefox 4? Is there an option to re-enable that?

    Before I upgraded to Firefox 4, the back button (as it is in every other browser under the sun,) had a dropdown so you could skip one tier of going back and drop back multiple levels. This is especially important when there is a site redirecting you and you can't rewind past it with single Back clicks. However, FF4 doesn't have this -- at least not by default -- and I don't see it anywhere in the options to add it. Is it hiding somewhere I haven't found, or was that removed?

    You have to either click and hold the back button or right click to access the drop down selection.

  • Why doesn't my bottom button work sometimes

    Sometimes it acts like its locked up and the bottom button won't work....

    I'm not exactly sure what could be causing this to occur, but this "fix" seems to have helped other users with a similar home button issue.
    From the home screen, double tap the home button to bring up the task bar with the recent apps in it. Tap and hold down on one of the app icons until they all begin to wiggle. Tap the minus signs in the corner of all of the apps to close them. Then tap the screen above the task bar. Restart the iPad by holding down on the sleep button until the red slider appears, then slide to shut down. Press and hold the sleep button until the Apple logo appears, to start up.
    You can also try an old standby -reset the iPad. Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears - ignore the red slider - let go of the buttons. See if that helps.

  • In Firefox 3.6.17,why don't the tab buttons work?

    I've tried left and right click to gain access to new tab, but they do not work. I know they work in a later version, 4, but with version 4 I experience a lot of "freezing up".

    I didn't have the plain Ask toolbar, as I have refused it whenever it was offered. However, I updated Foxit reader yesterday, and noticed it was included, but couldn't see any way to not install it with the upgrade. So when my New Tab button didn't work, and I read here that Ask was probably the problem, I went and found the Foxit Toolbar and got rid of it. That worked a treat, and my button works again. Using Firefox 3.6.18. Thank you Edmeister :) Cheers, Keith

  • Why won't the sound buttons work on my HP Pavilion g series?

    for some reason the sound buttons UP, DOWN and MUTE will not work on my laptop.  even when i plug in the headphones it does not work.  HELP!

     Hi,
    Try the following.
    First, download the Flash uninstall utility on the link below and save it to your Desktop.
    Flash Player Uninstaller.
    When the download has completed, close all browser windows and run the uninstaller.  After this has completed, restart the notebook.
    Next, download and install Firefox and then using Firefox, download and install the latest version of Adobe Flash.  Note: You may want to deselect the option to include McAfee Security Scan Plus before downloading.
    Close all browser windows before running the Flash installer.
    Launch Firefox and see if videos etc play Ok in this browser - if they do, close Firefox, open Internet Explorer and click on the same Adobe Flash link above to get a prompt to install the ActiveX component.  When done, restart Internet Explorer.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Why doesn't the download button appear on the App Store for some apps?

    Hey. So, I have an iPhone 5 with iOS 7.0.4. And the download button doesn't appear on the App Store for some apps. So, I would be happy if someone could help me with this problem..

    Remove the App Store app from Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the App Store app preview card to remove it from the list
    - Press the home button when done.
    Try the App Store again

Maybe you are looking for