Why doesn't VCast see my DroidX? Version wrong?

Hi All,
Anyone know what to do? My VCast install doesn't 'see' the DroidX.
Is thaere a specific version needed to sync the X?
Thanks,
Chip

... nope...
Needed a repair-run for the Motorola Driver Installation...
Then it appeared correctly in Device Manager and Explorer.
Needed an Uninstall of VCast.
Switched to Motorola Media Link.

Similar Messages

Why doesn't Firefox see that I have Flash loaded on my computer?

I have Flash 10.1.102.64 loaded on my computer and I can watch youtube videos on Windows IE. I just loaded Firefox 3.0.5 and when I try to watch a youtube video, it tells me I need to install Flash. Why doesn't it see Flash? Do I need to do something first?

Safari>Preferences>Security
Is "Allow Plugins" checked?
If it is, follow the illustrated instructions here: http://forums.adobe.com/thread/1343084 to do a complete "clean install".

Why doesn't iTunes see my iPod 80gb Video since I upgraded to OSX 10.4?

I upgraded to Tiger from Leopard a couple of weeks ago and haven't been able to sync my iPod since. I've rebooted both the iPod and my Mac, Re-installed iTunes, replaced the ipod.plist and DRM key, and done everything on the Apple Help:
http://docs.info.apple.com/article.html?artnum=61937 "Mac OS X 10.4.x-Install the latest available Mac OS X 10.4.x update. If you are already using the latest version of Mac OS X 10.4, or if updating does not help, perform an archive installation of Mac OS X 10.4.
I didn't do the "Archive installation which I can't do because there isn't enough room to copy the internal hard dive data onto itself. Please tell me why my iPod appears in the finder, but iTunes just won't recognize it!

Hi mattweb,
Windows is probably confusing your iPod with a USB network device. In this case, definetely try assigning your iPod a different drive letter.
If "My Computer" recognizes your iPod, then try performing the steps below:
1 - Don’t plug in your iPod yet.
2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
3 - Click on the "Disk Management" button in the left panel area.
4 - Now, with "Computer Management" and Control Panel windows opened, reset your iPod, and connect it.
5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
Here's what it should look like:
Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
For more details, see this article:
Windows confuses iPod with network device / Changing drive letter
I hope this helps you,
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

Why can I only see the mobile version of certain websites instead of the full site?

some website are shown only in mobile version instead or full version, even when I click on the link that says "full site" I get redirected to the mobile version. This only happens in Firefox since I've tried other browsers too.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

Why doesn't Photoshop see my scanner or the plugin? (Mac OS)

Just loaded CS4 on Mac 10.5.7. I downloaded and installed the latest OSX Epson 1240U scanner software, and also copied the Twain plugin from the Adobe Goodies CD to the Photoshop > Plugins > Import/Export folder. Rebooted the computer, power off and unplugged my USB scanner, fired it back up, restarted Photoshop, etc. The scanner software works fine in stand-alone mode.
But Photoshop doesn't see my scanner at all. In fact, the TWAIN plugin doesn't even show up in the plugins folder list.
Whaz goin' on? How do I fix this?
Thanks, Lou

PHOTOSHP IS RELATED TO SCANNING...
NO! PS is about retouching, color-correcting, compositing, converting, etc...
How you get the image into your computer as a digital file is irrelevant to Photoshop...
Yeah, back in the day of SCSI scanners, it was a great convenience to scan into PS, do some preliminary adjustments, and save the file, to be worked on later...
You don't need to scan into PS to "Please/Win" the client. They couldn't care less about your workflow. You agree that the end result is what matters, right?
Using the TWAIN plugin to bring an image into PS, or scanning outside of PS, then bringing it in for final adjustment, makes no difference...
Except, as Chris points out, you're less apt to lose a lot of work if you do it OUTSIDE of PS.

Why doesn't FMLE see my Datavideo HDR-50 through firewire?

I'm trying to use the firewire output of my Datavideo HDR-50 as an input device for Flash Media Live Encoder but it doesn't see it in the device settings. Are there some parameter settings that need to be changed?

more information please, What operating system are you using? does your HDR-50 work with any other programs on your computer?
If you are using Windows vista or windows 7 you may need to upgrade youre firewire drivers to use the legacy driver shipped with window
you can see this video for info about how to change youre drivers..
http://www.youtube.com/watch?v=s4JfbDW6AtI

Why doesn't my firefox support latest version of IDM ?

m working for golalaa.net and while i want to download some files or backup of cpanel then tend to use idm but what to do in order to be able to download my backup using it ?
''Title edited by a moderator.''

Why are you still running Firefox 3.6? It is horribly out of date and insecure, you need to update to Firefox 14.0.1 to receive all security update. [[Update Firefox to the latest version]]
Then, if you till have problems, can you explain what you are trying to do here?

Why doesn't itunes see that my ipod is a video ipod?

Hi,
I am getting really annoyed with this. I have always used a photo ipod 30GB, but I now have a video one. However when I try to add videos to the ipod itunes tells me that not all songs were added to the ipod because they cannot be played on this ipod.
Also, when I go to preferences the video area is greyed out.
What can I do?
I have reinstalled the software, and itunes itself. I have restored the ipod, updated it to 1.1.1, and I have looked through all the online tutorials, but I still can't do it.
My friends ipod also has the same problem on my PC.
WHY?
PLEASE, PLEASE HELP - I'm going out of my mind!

Hi mattweb,
Windows is probably confusing your iPod with a USB network device. In this case, definetely try assigning your iPod a different drive letter.
If "My Computer" recognizes your iPod, then try performing the steps below:
1 - Don’t plug in your iPod yet.
2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
3 - Click on the "Disk Management" button in the left panel area.
4 - Now, with "Computer Management" and Control Panel windows opened, reset your iPod, and connect it.
5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
Here's what it should look like:
Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
For more details, see this article:
Windows confuses iPod with network device / Changing drive letter
I hope this helps you,
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

Adjusted exposures in LR, why doesn't PS see changes

I am completely stuck with LR! If anyone has any ideas please share! I have adjusted exposure and straightened images in LR then when I bring then into PS (using Edit in PS) it isn't carrying any of the exposures or adjustments etc over on the image. Any ideas?

Which version of LR4?
Have a read of this post, see if it helps:
http://www.lightroomforums.net/showthread.php?19637-Lightroom-edits-not-appearing-when-usi ng-quot-Edit-in-Photoshop-quot

New hard drive, itunes library on an external drive... why doesn't it see it?

My internal hard drive died, has to reinstall snow leapard on my older macpro. Even though I have pointed itunes to the library I want it to use in preferences, the library isn't seen by itunes. If I click on a song from the external drive, itunes suddenly finds the song and it is sees it. Is there any other way to do this? I have way too much music and video files to click on each one...

Well, I can say that the question is partially solved.... while most of my music library popped up, much of it did not. The only common denominator I can see is that the music I transferred off of disc may not have transferred over, only the itunes purchases? I can't see for sure. I am still trying to figure out how to get the new itunes app on my new hard drive to see everything without me having to click on every file thats missing. Let this be a lesson to all to back everything up on time machine. I thought that having my data on a seperate hard drive would be ok. Seriously wish I had used time machine.

Why doesn't Google+ work in some versions of Firefox for Mac?

I had a problem a couple of months ago, where Google+ no longer worked properly through Firefox. After the next automatic update, the problem was resolved. However, the most recent update has rendered Google+ useless once again. I can load the page, but none of the links do anything when I click them, and the chat/hangout options do not load on the right hand side either.
Please could you stop changing whatever it is in the updates that toggles this problem, or tell me how to fix it.
Cheers,
Rob

Please reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
See if this helps solve the issues you had and please report back to us!

Why doesn't Adobe see my printer?

I cannot print my PDF files. I have a new Toshiba laptop, use Windows7, and just downloaded the latest version of Adobe. When I select Print, the default printer is a Lexmart 800. I don't have that printer. The only printer I have installed ( I checked on it) is an Officejet 6500A from HP. Any way to let Adobe know what printer I have?

Hi Mendy, I am afraid you will have to go for : http://www.ecamm.com/mac/ichatusbcam/

Why doesn't fcpx see my xml - its greyed out

I exported an xml from FCP7 and want to import it into X. On import it shows a greyed out xml file. Help please!

You need 7toX. FCPX doesn't read legacy XML files.

I am getting an error saying "Your computer doesn't seem to support any version of Media Player". When I look at my list of plugins I do see that I have Window Media Player Firefox Plugin 1.0.0.8. Why am I getting this error?

I am trying to load a page & I get the error "Your computer doesn't seem to support any version of Media Player". I then go to the tools & to add ons & to plugins. There under the plugins is Windows Media Player Firefox Plugin 1.0.0.8. It is enabled. My question is what does this error mean? Do I have the Media Player I need or not?

Notes:
1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

Why doesn't version 17.0.0.169 show up in IE11 8.1 64-bit Manage Add-Ons?

KB3044132 shows as installed for Flash Player update, and the Control Panel Flash Player icon for 32-bit shows 17.0.0.169 installed (I have 64-bit and 32-bit), but the Manage Add-Ons for Shockwave is Enabled and showing version 17.0.0.134! When I check the version using Adobe it only shows 17.0.0 and not the important part, so I cannot tell if Adobe detects 17.0.0.169 or 17.0.0.134! I think I need to know if IE11 64-bit has 17.0.0.169 also. Please advise because Microsoft technical support says to contact Adobe about this. Please delete my entry in Adobe general forums, Bridge general discussion as michaelh94875078. I did not see Flash Player on the list of communities provided during my first post.

It occurs to me that maybe Microsoft will not allow their 17.0.0.169 KBitem to go out until their next update on the second Tuesday of May for their convenience and reputation! I want any update for Flash Player to be installed immediately for security. That is why I tend to use Firefox with NoScript and Web of Trust when I use a Google search. I will be watching the next Microsoft update to note if the KBitem it said was not appropriate for my computer - goes in!
Sent from Yahoo Mail on Android
From:"m_vargas" <[email protected]>
Date:Wed, Apr 22, 2015 at 4:15 PM
Subject:[Using Flash Player] Why doesn't version 17.0.0.169 show up in IE11 8.1 64-bit Manage Add-Ons?
Why doesn't version 17.0.0.169 show up in IE11 8.1 64-bit Manage Add-Ons?
created by m_vargas in Using Flash Player - View the full discussion
Hi michaelh94875078,
I'm sorry, I misread your previous post and thought it had been installed. From my experience with Microsoft Updates is that some times they depend on some update being installed. I'll run Windows Updates and install all updates, then run Windows Updates again after all updates finish installing. Sometimes it finds new updates that weren't there before, and sometimes it doesn't. You can try that route, or download the Microsoft update posted at the bottom of the Flash Player Issues | Windows 8 page. Download the one that corresponds with your OS version. You may want to bookmark this tech note for future reference in case Microsoft Updates fails to detect the update is available for your system.
Maria
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7467865#7467865 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7467865#7467865
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Using Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Why doesn't VCast see my DroidX? Version wrong?

Similar Messages

Maybe you are looking for