Why doesn't voice-over work in one portion?

I'm doing my first voiceover and it seems to be fine except for one photo session of clips. For some reason it says I'm recording and all indications are there when finished. But when I playback, it's like the recording didn't work. Other clips in other sessions before and after work fine. Fortunately, it's a small section of clips and I can do without recording, but I would like to know why! You have helped me so much before, and I hope you can again. Thank you.

Not sure why, but sometimes a project will just cease playback of Voiceovers added to it. I've seen this before, but never had it persist into a new project. As with any issues that are specific to a single project, it's usually best to start over, as one problem is quite possibly indicative of further issues down the line with that same project.
As a workaround (if you REALLY want to avoid recreating the project) would be to copy the voiceover files from within the iMovie Project file (browse to your Movies/iMovie Projects/ folder and right-click or CTRL+Click on the name of the project, then click "Show Package Contents") for that project out to your Desktop (or any other accessible location), then drag them back in to add them as a regular audio track. I've used this trick successfully, but it's not 100% (going back to the 'one problem means more later' thing).

Similar Messages

Why is the voice over working on my nano, although I have reset and disabled it?

Occasionally, the voice over on my ipod nano 7th Gen. would interfere with my music playing. It interrupts songs with saying the song title, band names, things like "Top 25," "My Top Rated," "25 Most Played," etc. In addition, the fast foreward function would sometimes run while I am playing music, although I did not engage it. The music also pauses, skips, and plays without my choice. I have tried disabling voice over and resetting my nano, but the issue persists.How can I stop this from happening, or how may I procceed get this fixed?

Hi skymichelle,
If you are having sound issues with your MacBook Pro, you may find the following articles helpful:
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Apple Support: Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
Regards,
- Brenden

Why doesn't my timeline work in IE?

I created this page with a basic timeline. The timeline works in Firefox, Safari and Chrome but not in IE. All my browsers are up to date. Any help would be appreciated!
http://laartgallery.net/index2.html
Thanks again,
Steve

Nancy; THANK YOU!! OK..it still does not work but I see where there are a lot of errors. I changed the head tags and it still does not work but I would assume I can go to the site/page you sent and it analyzes webpages for errors? I will keep at it til I get it right or maybe redo the page but thank you very much for your time...I truly appreciate it. Steve
Steve Andrews
[email protected]
www.digital-tailoring.com
215-493-8958
Date: Sat, 3 Mar 2012 13:03:27 -0700
From: [email protected]
To: [email protected]
Subject: Why doesn't my timeline work in IE?
    Re: Why doesn't my timeline work in IE?
    created by Nancy O. in Dreamweaver - View the full discussion
Invalid code. http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Flaartgallery. net%2Findex2.html You have multiple sets of & tags in your document. Only one set is allowed. Nancy O.Alt-Web Design & PublishingWeb | Graphics | Print | Media Specialists http://alt-web.com/http://twitter.com/altweb
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4243531#4243531
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4243531#4243531. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why doesn't this update work?

Why doesn't this update work? Can't I sum up two select count(*) in such a subquery?
Thanks
update sales T
set T.field2 = ((select count(*)
from sales t
where t.field1 = trunc(sysdate)) + (select count((*)
from sales t2
where t2.field2 is null));
I get
ERROR at line 4:
ORA-00907: missing right parenthesis
with the * under the +
In other words I want to run
update sales set field = ((select count(*) ..... ) + (select count(*) ..... ))
Edited by: Mark1970 on 26-mar-2010 1.37
Edited by: Mark1970 on 26-mar-2010 1.38

My problem is to undestand why I got a syntax error about parenthesis.Because you cannot perform arithmatic operation with a value coming from a subquery in a SET clause of UPDATE
SQL> update emp
2 set sal=(select 1 from dual)+1;
set sal=(select 1 from dual)+1
ERROR at line 2:
ORA-00933: SQL command not properly ended
SQL> select sal from emp
2 where deptno=(select 10 from dual)+10;
       SAL
       800
      2975
      3000
      1100
      3000
SQL> select deptno,sal from emp
2   where deptno=(select 10 from dual)+10;
    DEPTNO        SAL
        20        800
        20       2975
        20       3000
        20       1100
        20       3000Try such few examples..
Twinkle

My ipod shuffle 4th gen bought today and the voice over works for naming playlist and battery percent but wont name song and artist can anyone help also is the voice over button meant to be soft when pushed ?

my ipod shuffle 4th gen bought today and the voice over works for naming playlist and battery percent but wont name song and artist can anyone help also is the voice over button meant to be soft when pushed ?
thanks

This document explains setting up and using VoiceOver.
http://support.apple.com/kb/ht4322
The overall settings for VoiceOver is on the shuffle's Summary screen in iTunes.
Artist name and song name - Press and release the VoiceOver button.
The playlist menu - Press and hold the VoiceOver button.

Sountrack or Logic/Logic Express for Voice Over work?

Hello,
I am wondering which software is best for voice over work? Sountrack or Logic/Logic Express?
Any input would be great. I would add the standard effects/filters to certain voice overs and add sound effects and music.
I have a midi/guitar and garage band is enough for me. I would not want to use Garageband as my software of choice for voice over work. I want markers and other more advanced tools?
Thanks,
Erik

Hi Erik,
I haven't used Logic or Logic Express, but I recently switched from Pro Tools to Soundtrack Pro 2. (I'm an independent producer/host for 2 weekly shows on Connecticut Public Radio.)
All I can say is this-- Soundtrack Pro has shaved hours off my Pro Tools workflow, is much more intuitive, and is (obviously) Mac-friendly, so I've been singing its praises ever since I made the switch.
In fact, I think Apple should be marketing it directly to radio stations!
Hope this helps,
Bruce
www,barberproductions.com
www.rlsguide.com

Why doesn't my panaramic work on my lock screen

why doesn't my panaramic work on my lock screen

Panoramic was only something apple had in the Betas and has not been seen on any device, even the 5S, since they released the full versions of iOS 7.

Why doesn't my sound work on apps

Why doesn't my sound work on downloaded apps ?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Why doesn't voice or sound work when in a moving vehicle?

When I am in a moving vehicle nothing voice activated works. Also I can get no sounds.

Hi BobM1234,
If you are having issues using Siri you may want to troubleshoot using the steps in this article -
iOS: Troubleshooting Siri
http://support.apple.com/kb/TS4079
Thanks for using Apple Support Communities.
Best,
Brett L

Looking for a reading App. iPad (iOS 7.1.2) - Kindle. I am looking for a good app that can help a college student with reading books that cannot be found on audio book. Voice over works, but monotone!

Looking for a reading App.
iPad (iOS 7.1.2) - Kindle.
I am looking for a good app that can help a college student with reading books that cannot be found on audio book. I have tried voice over and it works but it's very monotone and it really strings things together.
- I'm willing to pay for a good app but I can't seem to sort though the many that are out there. Any suggestions.

Ah. I'm surprised, but there we go.
Have a look here ...
http://jam.hitsquad.com/vocal/about2136.html
(courtesy of googling 'OSX free multitrack recording software')
Didn't have time to do more than skim, but 'Ardour' looked promising. Protools is the only one I've used, the full product is one of the industry standards, but the free 'lite' version listed here seems to be limited to 2 in/out as well.
Referring to your original post, I'd think trying to write or 'script' something would be a nightmare ... synchronisation of streams within something like Applescript would be a major issue, quite apart from anything else.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

Why doesn't my password work to allow others to access my airport?

A year ago when I first got the airport extreme I set it up with a base name, network name, and password. My wifes cheap laptop pc was able to access the web with my password easily. I recently had friends come over and need to get on the web with their computers but it wouldn't accept my password. I'm pretty sure I know my password. So I tried to access my keychain and realized i don't understand how to use it because I thought it saved passwords but I can't view any passwords (just the fact that I have passwords for all sorts of things-but no passwords shown). I don't know why it would work in one computer and not any more. Does anyone know how to look up and double check your airport extreme password and/or know why both mac or pc computers can pick up my signal network but the password is incorrect or won't work? I'd greatly appreciate any tips, directions, or advice!

Hello Mt514. Welcome to the Apple Discussions!
Does anyone know how to look up and double check your airport extreme password
To find your current AirPort wireless encryption password, just do the following...
o Macintosh HD > Applications > Utilities > Keychain Access
o Run Keychain Access.
o Select "All Items" in the Category window.
o Look for entries of Kind "AirPort network password"
o Select it, and then, double-click to open it.
o Select "Show password," and then, enter your OS X User password to reveal the stored value.
or know why both mac or pc computers can pick up my signal network but the password is incorrect or won't work?
Which wireless encryption (WEP or WPA) are you using on your AirPort?

IPad quit working but voice over works...?

My dad used his iPad all the way till it died, then when he tried plugging it back in, it wouldn't come on. So now it's just a plain black screen. We have charged it, and we have reset it numerous times and the logo only comes on for a split second then goes off. The voice over is the only thing that works. We keep reseting it and sometimes little glitches of the screen will come on for a nano-second and thats it. How do we fix this? And we have updated it on iTunes and charged it with different chargers and everything.

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

Why doesn't viewport tag work if the page is local?

If the ipad just connects to my computer and views the .htm page then the viewport tag is not supported. However, if I upload that same page to a web server and visit it the ipad does support it.
Any idea why that is or what can be done to fix it?

Hi Morpheus:
I haven't tested it but Firefox 26 from the Google Play store should work on the Galaxy Mega. I'd be surprised if it doesn't. It works fine on the 3 other Samsung devices I have.
Please try re-installing Firefox and then if you still have the same issue namely:
QUOTE
'''I get the Metro PCS default page that says I need the Mobile Hotspot service'''
END QUOTE
than it's probably a Metro PCS issue because it is possible for your mobile carrier to do things like take over what's displayed when you open Firefox or any other browser. We've had cases of other US mobile carriers changing the home page on Firefox and other Android browsers for example.
If you still get the same Metro PCS issue, does the issue go away when you use another WiFi provider, e.g. at Starbucks?
'''IF the issue goes away when you use another WiFi provider, it's definitely a Metro PCS issue (in that case please ask Metro PCS support).'''

Why has my voice over stopped recording

I've done many voice overs in iMovie, but, suddenly it's not working. The first clip on the project recorded fine, I then added several more before finding out that although the clips appeared (in purple) as expected, there was no sound. The mic (snowball) appeared to be working as the volume indicators were all moving. I tried quitting and restarting but with no luck. Checked all the connections etc
I really have no ideas here. Anyone seen this before????
Thanks
MMK

OK so I solved my own problem. I made a copy of the project and renamed it. Started all over again and it worked fine. Still don't know what the problem was though?

Why doesn't my eprint work on my android anymore?

Why doesn't my e-print work on my android anymore?

Panoramic was only something apple had in the Betas and has not been seen on any device, even the 5S, since they released the full versions of iOS 7.

Why doesn't voice-over work in one portion?

Similar Messages

Maybe you are looking for