Why doesn't Web Proxy Server use default route?

After downloading Sun Java Web Proxy Server, I notice that the path to retrieve URLs from the internet does not go out the default route.
However my pings, traceroutes, telnets, etc. to the same URLs do go out to the default route correctly.
I have tried with both SP5 and SP6.
Thanks

I went to about:cache. It says 0 Kib offline cache.
I went to the two links, but I can't understand what to do. I know I have to allow some storage in order for the Flash based cams to run. I have the one I use the most set to allow 100 KB but is says there is 0 being used.
I'm attaching a few screen captures. There are many sites listed below where the last one is cut off. I don't even know what some of them are. I don't understand what to do. Sorry.
EDIT. I may have found the area that is causing the problem. See last screenshot of Website Storage Settings panel. For some reason, that is now on 0. I don't remember changing it to that or ever seeing this section before. Should I move it to some other number?
Another EDIT: I did move that slider over in the last screenshot, and I now have the cache and Clear works again. So you helped me solve this problem that was causing FF to crash all the time, I think. Thank you!
But now that I've seen that list of places storing things, I'm worrried about the ones I've never heard of and don't remember visiting. Is it a good idea to click Delete all sites or am I over-reacting to all this malware scare? Maybe I picked them up from Pinterest. I do have Sophos Antivirus running, so I don't think I have a problem at this time.

Similar Messages

Web proxy server using servlet

Hello members,
I want to develop a web proxy server like this [http://www.webproxyserver.net|http://www.webproxyserver.net] using servlet. anyone of you have any idea how to this, kindly suggest me. Thanks

HttpProxyServlet's configuration properties are added as server init parameter in web.xml which one can configure at deployment time. Most of the properties have a default value which will take effect if it is not set in web.xml
Refer to http://e-docs.bea.com/wls/docs100/plugins/http_proxy.html#wp115201 for more details.

Why doesn't Sun ONE Web Proxy Server support full replication?

Sun believes caching on-demand is a much more appropriate model for either the World Wide Web or an intranet. Common indexes should be distributed, but data can (and should) be stored wherever is most appropriate on the network. If Proxy Servers are deployed, there will be a 50 percent to 75 percent chance that the document will be cached locally and no chance of getting stale data.
Sun ONE Web Proxy Server uses sophisticated statistical analysis to store the documents most likely to be needed. It also manages document expiry and version control, and by default checks the home server every time a document is requested. Full replication like that performed by other softwares presumes that each document needs to be fully replicated on every server. (Imagine doing that on the Web!) This model limits the scalability of the infrastructure, and requires many more servers, more hardware, and more management complexity. More importantly, it increases the likelihood of getting stale data. A document checked in at one location may take a day or more to be fully replicated around the world.

If you have a support contract, get in touch with a support engineer. We've run into a bug related to following referrals in the "off-the-shelf" version of the proxy server. I believe there is a hotfix that solves the issue.

IPlanet Web Proxy Server 3.6 SP 5 Persistent Connection doesn't work

I use iPlanet-Web-Proxy-Server/3.6-SP5 on Soloaris. and trying to use persistenet connection functions in forward proxy through setting keep alive to "ON". But I found this functions doesn't work at all. The following trace is the HTTP Header info i got from receiver.
1. The HTTP Header info without using Proxy Server
Request headers :
proxy-authorization: Basic YXBwLWVtcXVzZXI6MTIzNDU2Nzg=
connection: Keep-Alive
proxy-connection: Keep-Alive
server: IBM WebSphere MQ internet pass-thru V1.3.2
accept: application/octet-stream
host: 10.1.13.43:1414
user-agent: 10.1.72.254:1414
content-type: application/octet-stream
content-length: 132
accept-encoding: identity
2. The HTTP Header info using Proxy Server
Request headers :
server: IBM WebSphere MQ internet pass-thru V1.3.2
accept: application/octet-stream
host: 10.1.72.254:1414
user-agent: 10.1.72.254:1414
content-type: application/octet-stream
content-length: 132
accept-encoding: identity
date: Mon, 06 Sep 2004 18:04:12 GMT
forwarded: by http://iaccess.mor.cr:8085 (iPlanet-Web-Proxy-Server/3.6-SP5)
via: 1.1 S1PS,1.1 S1PS
I found Kepp-Alive information ( "connection: Keep-Alive" and " proxy-connection: Keep-Alive")
was taken out by proxy server.
Is a proxy server bug? Can I do something to make it work?
Regards,
songtao

Hi
This as per the HTTP/1.1 RFC (RFC2616)
The Connection general-header field allows the sender to specify options that are desired for that particular connection and MUST NOT be communicated by proxies over further connections.
The Connection header has the following grammar:
Connection = "Connection" ":" 1#(connection-token)
connection-token = token
HTTP/1.1 proxies MUST parse the Connection header field before a message is forwarded and, for each connection-token in this field, remove any header field(s) from the message with the same name as the connection-token. Connection options are signaled by the presence of a connection-token in the Connection header field, not by any corresponding additional header field(s), since the additional header field may not be sent if there are no parameters associated with that connection option.
Read the following at
http://www.w3.org/Protocols/rfc2616/rfc2616-sec8.html#sec8.1.3
and
http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.10
Regards
Nagendra HK

Web Proxy Server 3.6 with Administration Server using SSL connection

In your manual: Administrator�s Guide Sun� ONE Web Proxy Server Version 3.6 SP3 for UNIX you wrote:
You should also make the administrative connection a mandatory SSL connection
Instead of using http://servername:port_number
I need to use:
https://servername:port_number
How can I do that?
Thanx
Gian Mario

HI
To enable https for the admin,
Create a certifcate for the proxy admin
Next, From 'Admin Preferences', click on 'Encryption on/off'
From the 'Encryption on/off'; screen that appears, click on the 'on' radio button. Select the certficate from the alias list and click on OK to enable encryption for the cerficate you have installed for your admin server.
Now restart you admin server.
You wil now be able to connect to your admin using https
Thanks
Nagendra HK

Why won't Web Proxy Admin Service start on Win Server 2008 installation?

Hi,
I've just installed Sun Web Proxy 4.0.13 on my Windows Server 2008 box. I cannot get "Sun Java System Web Proxy Server 4.0.13 Administration Server" to start, it fails with the following event messages:
In Application logs i get:
"+The description for Event ID 26 from source c__sun_proxyserver40_proxy-admserv_config cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.+
+If the event originated on another computer, the display information had to be saved with the event.+
+The following information was included with the event:+
+File C:\Sun\ProxyServer40\proxy-admserv\config/server.xml, line 8, column 8: Unknown element 'SERVER'+
+the message resource is present but the message is not found in the string/message table+"
...and....
"+The description for Event ID 26 from source c__sun_proxyserver40_proxy-admserv_config cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.+
+If the event originated on another computer, the display information had to be saved with the event.+
+The following information was included with the event:+
+File C:\Sun\ProxyServer40\proxy-admserv\config/server.xml, line 8, column 8: Unknown element 'SERVER'+
+the message resource is present but the message is not found in the string/message table+"
Any help would be greatly appreciated. I have JRE 6.0u18 installed, and pointed the install to use that directory for the JRE home.
Many thanks, Mark
P.S. the proxy server service starts fine, it's just the admin service that won't start....

Hello,
Could you please copy the model.mdf and modellog.ldf from
C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Binn\Templates
To
C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA
Rebuilding the system databases you will lose lose logins, jobs, SSIS packages. You may have to restore or attach user databases.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Can i setup a secure reverse proxy using sun one web proxy server and windows 2000?

I've tried this on IPlanet Proxy 3.6 and, after reading the documentation, realized that SSL is not supported on the Windows platform. So I'm asking if it is supported using Sun One Web Proxy Server

Hi,
Yes, What you say is right.
"The NT and Windows 2000 versions of iPlanet Web Proxy Server 3.6 do not support SSL".
Sun One Web Proxy Server is as same as iPlanet webproxy server.
May be in future relase of proxy server SSL will be supported in Win2000.
Regards,
Dakshin.
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support.

Web Proxy Server Load Balancing

I deployed Sun Jave Web Proxy Server 4.0 as a Reverse Proxy. I would also like to use it as a load balancer. As per the instructions, I configured the obj.conf file as shown below
Route fn="set-origin-server" server="https://xx.xx.xx.xx" server="https:yy.yy.yy.yy" sticky-cookie="JSESSIONID" sticky-param="jsessionid" route-hdr="Proxy-jroute" route-cookie="JROUTE" rewrite-host="true" rewrite-location="true" rewrite-content-location="true"
But, it is not doing load balancing. It always sends to the first server (xx.xx.xx.xx). I guess that is because I used mapping as follows:
NameTrans fn="reverse-map" from="https:xx.xx.xx.xx" to="https://server.net" rewrite-location="true" rewrite-content-location="true"
NameTrans fn="redirect" from="http://server" url="https://xx.xx.xx.xx"
NameTrans fn="map" from="https://server" to="https://xx.xx.xx.xx" rewrite-host="true" name="pa-server-farm1" NameTrans fn="map" from="/" to="https://xx.xx.xx.xx" rewrite-host="true" name="pa-server-farm1"PathCheck fn="url-check"ObjectType fn="block-ip"
ObjectType fn="cache-enable" cache-auth="1" cache-https="1" query-maxlen="0" min-size="0" Service fn="proxy-retrieve"
I don't understand how routing and mapping work togother. Any help in this regard is appreciated.

Motor,
the following is from the Web Proxy Sever Administration guide. Please, check the last paragraph for the explanation. Any how, the problem is simple. I am using the Proxy Server as the Reverse proxy. And at the same time, I would like to use two origin servers (for load balancing) instead of one. How do I make both load balancing and reverse proxy functions work together?
Thanks
To Create Regular or Reverse Mapping
Access the Server Manager, and click the URLs tab.
Click the Create Mapping link.
The Create Mapping page is displayed.
In the page that appears, provide the source prefix and source destination for the regular mapping,
for example,
Source prefix: http://proxy.site.com
Source destination: http://http.site.com/
Click OK.
Return to the page and create the reverse mapping, for example,
Reverse mapping:
Source prefix: http://http.site.com/
Source destination: http://proxy.site.com/
To make the change, click OK.
Once you click the OK button, the proxy server adds one or more additional mappings. To see the mappings, click the lView/Edit Mappings link. Additional mappings would be in the following format:
from: /
to: http://http.site.com/
These additional automatic mappings are for users who connect to the reverse proxy as a normal server. The first mapping is to catch users connecting to the reverse proxy as a regular proxy. The �/� mapping is added only if the user doesn't change the contents of the Map Source Prefix text box provided automatically by the Administration GUI. Depending on the setup, usually the second mapping is the only one required, but the extra mapping does not cause problems in the proxy.

Socks services errors in web proxy server

Using SunOne web proxy server 3.6+sp1, the socks service frequently out of service. Sometime its process is still alive , but can't response the client request; sometime the process is gone! The following is the errors log:
[25/Oct/2002:11:18:06] 8269 debug: io_loop: killing tunnel after rollover, lastactivity == 1966619898,PR_IntervalNow says 2026622109
[25/Oct/2002:11:20:31] 8269 debug: io_loop: killing tunnel after rollover, lastactivity == 1981101717,PR_IntervalNow says 2041102282
[25/Oct/2002:11:20:48] 754 error: unknown request type 0x47 from 10.160.8.159:30 83
[25/Oct/2002:11:41:07] 14946 debug: ACCEPT RETURNED NULL! io_total = 63 dead =-1
Any infomation is welcome!

what's the software name of socks? how i can download it?
you mean it's not good?
And the following is the issue in detail:
The socks service frequently out of service. Sometime its process is still alive , but
can't response the client request; sometime the process is gone.It occurs once a
day, and after restart, its go away. And the last issue about must reconnect the gameroom
is gone now, and was identified as the network's problem.
mangus.conf:
#ServerRoot /iPlanet/proxy/proxy-proxy-proxy
ServerName proxy
ServerID proxy-proxy
Address 10.160.1.14
Port 8080
User root
LoadObjects obj.conf
RootObject default
ErrorLog /iPlanet/proxy/proxy-proxy-proxy/logs/errors
LDAPConnPool 5
SearchDepth 30
Dyngroups ON
SearchTimeLimit 30
BindTimeLimit 15
LdapCheckUp 30
CertificateChecking OFF
PidLog /iPlanet/proxy/proxy-proxy-proxy/logs/pid
MaxProcs 1024
ProcessLife 128
DNS on
Security off
Ciphers rc4,rc4export,+rc2,+rc2export,+des,+desede3
SSL3Ciphers
rsa_rc4_128_md5,rsa_3des_sha,+rsa_des_sha,+rsa_rc4_40_md5,+rsa_rc2_40
md5,-rsanull_md5
ACLFile /iPlanet/proxy/httpacl/generated.proxy-proxy-proxy.acl
obj.conf
# Netscape Communications Corporation - obj.conf
# You can edit this file, but comments and formatting changes
# might be lost when the admin server makes changes.
Init funcs="icp-init,icp-route" shlib="/iPlanet/proxy/plugins/icp/icp.so" fn="load-
modules"
Init funcs="pa-init-proxy-array,pa-init-parent-array,pa-enforce-internal-routing,pa-set-
parent-route,pa-set-member-status"
shlib="/iPlanet/proxy/plugins/parray/parray.so" fn="load-modules"
Init fn="load-types" mime-types="mime.types"
Init access="/iPlanet/proxy/proxy-proxy-proxy/logs/access" format.access="%
Ses->client.ip% - %Req->vars.pauth-user% [%SYSDATE%] \"%Req->reqpb.proxy-
request%\" %Req->srvhdrs.clf-status% %Req->vars.p2c-cl%" fn="flex-init"
Init fn="init-proxy" timeout="300" timeout-2="15"
Init fn="init-dns-cache" status="on" dir="/tmp" semas="4" size="4096"
expire="28800"
Init fn="init-cache" status="on" ndirs="256" dir="/iPlanet/proxy/cache"
Init fn="init-partition" status="on" name="p1" dir="/iPlanet/proxy/cache/p1" max-
size="8000" min-avail="5"
Init status="on" dir="/iPlanet/proxy/cache/p2" name="p2" max-size="8000" min-
avail="5" fn="init-partition"
Init status="on" dir="/iPlanet/proxy/cache/p3" name="p3" max-size="8000" min-
avail="5" fn="init-partition"
Init status="on" dir="/iPlanet/proxy/cache/p4" name="p4" max-size="8000" min-
avail="5" fn="init-partition"
Init status="on" dir="/iPlanet/proxy/cache/p5" name="p5" max-size="8000" min-
avail="5" fn="init-partition"
Init status="on" dir="/iPlanet/proxy/cache/p6" name="p6" max-size="8000" min-
avail="5" fn="init-partition"
Init status="on" dir="/iPlanet/proxy/cache/p7" name="p7" max-size="8000" min-
avail="5" fn="init-partition"
Init status="on" dir="/iPlanet/proxy/cache/p8" name="p8" max-size="8000" min-
avail="5" fn="init-partition"
Init fn="init-urldb" status="on" dir="/iPlanet/proxy/cache/urldb"
Init fn="init-batch-update" status="off" dir="/tmp" conf-file="bu.conf"
Init status="on" dir="/tmp" hash-size="17191" table-size="85955" expire="3600"
fn="init-pauth-cache"
Init config_file="icp.conf" status="off" fn="icp-init"
Init set-status-fn="pa-set-member-status" file="/iPlanet/proxy/proxy-proxy-
proxy/config/parray.pat" status="off" fn="pa-init-proxy-array"
Init set-status-fn="pa-set-member-status" file="/iPlanet/proxy/proxy-proxy-
proxy/config/parent.pat" status="off" fn="pa-init-parent-array"
<Object name="default">
NameTrans fn="map" from="file:" to="ftp:" cont="yes"
NameTrans fn="pfx2dir" from="/ns-icons" dir="/iPlanet/proxy/ns-icons" name="file"
NameTrans fn="pac-map" from="/" to="/iPlanet/proxy/proxy-proxy-
proxy/pac/proxy.pac" name="file"
PathCheck fn="url-check"
PathCheck fn="check-acl" acl="proxy-proxy-proxy_formgen-READ-ACL_deny-
5619"
PathCheck fn="check-acl" acl="proxy-proxy-proxy_formgen-WRITE-ACL_deny-
5619"
Service fn="deny-service"
AddLog fn="flex-log" name="access" iponly="1"
AddLog fn="urldb-record"
</Object>
<Object name="file">
PathCheck fn="unix-uri-clean"
PathCheck fn="find-index" index-names="index.html"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service fn="send-file"
</Object>
<Object ppath="ftp://.*">
ObjectType fn="cache-enable"
ObjectType fn="cache-setting" max-uncheck="21600"
Service fn="proxy-retrieve"
</Object>
<Object ppath="http://.*">
ObjectType fn="cache-enable"
ObjectType fn="cache-setting" max-uncheck="7200" lm-factor="0.100"
Service fn="proxy-retrieve"
</Object>
<Object ppath="https://.*">
Service fn="proxy-retrieve"
</Object>
<Object ppath="gopher://.*">
ObjectType fn="cache-enable"
ObjectType fn="cache-setting" max-uncheck="14400"
Service fn="proxy-retrieve"
</Object>
<Object ppath="connect://.*:443">
Service fn="connect" method="CONNECT"
</Object>
<Object ppath="connect://.*:563">
Service fn="connect" method="CONNECT"
</Object>
socks5.conf
# Netscape Communications Corporation - socks5.conf
# You can edit this file, but comments and formatting changes
# might be lost when the admin server makes changes.
auth 10.160.0.0/255.255.224.0 - -
auth - - u
permit u,- - - - - - -
set SOCKS5_BINDPORT 1080
set SOCKS5_LOGFILE /iPlanet/proxy/proxy-proxy-proxy/logs/socks5.log
set SOCKS5_DEBUG 1
set SOCKS5_WORKERS 100
set SOCKS5_ACCEPTS 5
set SOCKS5_NOIDENT
set SOCKS5_NOREVERSEMAP
socks5.log
[19/Nov/2002:11:31:14] 830 debug: request from 10.162.169.176:2305
[19/Nov/2002:11:31:15] 830 debug: auth: userpass
[19/Nov/2002:11:31:15] 830 debug: authentication type 2 successful for hs
[19/Nov/2002:11:31:15] 830 debug: request 1 to jason314.3322.org:21
[19/Nov/2002:11:31:15] 830 request: hs 5 connect: ok 10.162.169.176:2305 ->
jason314.3322.org:21
[19/Nov/2002:11:31:15] 831 debug: request from 10.162.169.176:2306
[19/Nov/2002:11:31:15] 831 debug: auth: userpass
[19/Nov/2002:11:31:15] 831 debug: authentication type 2 successful for hs
[19/Nov/2002:11:31:15] 831 debug: request 1 to jason314.3322.org:21
[19/Nov/2002:11:31:15] 831 request: hs 5 connect: ok 10.162.169.176:2306 ->
jason314.3322.org:21
access
10.160.115.222 - scy-tl [19/Nov/2002:11:32:33 +0800] "GET
http://www.eefoo.com/c
ommunity/images/bbs0gg.gif HTTP/1.0" 200 146
10.160.115.79 - whh-tl [19/Nov/2002:11:32:33 +0800] "GET
http://fayhoo.com/image
/blank HTTP/1.0" 404 276
10.160.19.151 - lhb [19/Nov/2002:11:32:33 +0800] "POST HTTP://rich-bj.stockstar.
com:8892/1 HTTP/1.0" 200 81
10.160.160.130 - gsp-ld [19/Nov/2002:11:32:33 +0800] "GET
http://images.sohu.com
/cs/button/sony/12060.swf?clickthru=http://goto.sohu.com/goto.php3?code=sony-
sh2
40-fr12050 HTTP/1.0" 200 8302
10.160.23.141 - wyn [19/Nov/2002:11:32:33 +0800] "POST HTTP://rich-
bj.stockstar.
com:8891/1 HTTP/1.0" 200 81
10.161.159.40 - - [19/Nov/2002:11:32:33 +0800] "PUT http://204.177.92.204/w/getc
lientid?srv=china_sex&ver=0,0,0,62 HTTP/1.0" 407 271
10.160.17.108 - weizc [19/Nov/2002:11:32:33 +0800] "GET
http://www.guosen.com/cg
i-bin/RHStockGraphics.dll?GetTLine?code=10000001&cx=150&cy=70&am=0
HTTP/1.0" 200
1004
10.161.130.3 - czy-ykj [19/Nov/2002:11:32:34 +0800] "GET http://ad4.sina.com.cn/
btn/dbtel-tlhp.swf HTTP/1.0" 304 -
10.161.159.40 - - [19/Nov/2002:11:32:34 +0800] "PUT http://204.177.92.204/w/getc
lientid?srv=china_sex&ver=0,0,0,62 HTTP/1.0" 407 271
errors
[19/Nov/2002:11:33:13] failure: for host 10.160.80.148 trying to GET http://myjh
xp.com/bbs/forums.cgi?forum=4, retrieve-exit-routine reports: proxy retrieve fai
led: Proxy server's network connection was refused by the server: myjhxp.com.
The server may not be accepting connections or may be busy. Try connecting
agai
n later.
[19/Nov/2002:11:33:13] warning: last-modified in future (not caching): Tue Nov 1
9 03:51:01 2002
[19/Nov/2002:11:33:13] failure: for host 10.160.80.148 trying to GET http://myjh
xp.com/bbs/forums.cgi?forum=4, retrieve-exit-routine reports: proxy retrieve fai
led: Proxy server's network connection was refused by the server: myjhxp.com.
The server may not be accepting connections or may be busy. Try connecting
agai
n later.
[19/Nov/2002:11:33:13] failure: for host 10.162.101.73 trying to GET ftp://202.1
15.144.37/software/special/WinPE-9down.rar, retrieve-exit-routine reports: proxy
retrieve failed: Proxy server's network connection was refused by the server:
202.115.144.37. The server may not be accepting connections or may be busy. Tr
y connecting again later.
[19/Nov/2002:11:33:13] warning: last-modified in future (not caching): Tue Nov 1
9 18:21:00 2002
[19/Nov/2002:11:33:13] warning: last-modified in future (not caching): Tue Nov 1
9 03:51:01 2002
The logs is so large, i only can give you some of them typically.
and the types of log's record when problem occurs i have supplied to you, also i
pasted here
[25/Oct/2002:11:18:06] 8269 debug: io_loop: killing tunnel after rollover, lastactivity
== 1966619898,PR_IntervalNow says 2026622109
[25/Oct/2002:11:20:31] 8269 debug: io_loop: killing tunnel after rollover, lastactivity
== 1981101717,PR_IntervalNow says 2041102282
[25/Oct/2002:11:20:48] 754 error: unknown request type 0x47 from
10.160.8.159:30 83
[25/Oct/2002:11:41:07] 14946 debug: ACCEPT RETURNED NULL! io_total = 63
dead =-1
------------------------------------------------------------------

Does Sun ONE Web Proxy Server have built-in log analysis tools? What kind o

Sun ONE Web Proxy Server automatically logs all requests using either the common log-file format or an extended log-file format. The extended log-file format includes the referrer field and user agent. You can also create your own log file format by selecting which HTTP fields you would like to log. A built-in log analysis program includes reports such as total number of requests, total bytes transfered, most commmon URLs requested, most common IP addresses making requests, performance during peak periods, cache hit rates, and estimated response time reduction. The items logged and the analysis program are completely configurable using the server manager's HTML form.

Sun Java System Web Server is a web server; it serves web pages to web clients. Sun Java System Web Proxy Server, on the other hand, is a web proxy server; it routes requests/responses between web servers and web clients.
You can configure Web Server to act as a simple reverse proxy by installing the Web Server 6.1 Reverse Proxy Plugin. This doesn't provide any of the forward proxy or caching proxy functionality found in Web Proxy Server.
Both Web Server 6.1 and Web Proxy Server 4.0 are supported on Solaris 10.

IPlanet Sun ONE Web Proxy Server 3.6 SP6 terminating

I have a problem with my proxy server server.
I use iPlanet Sun ONE Web Proxy Server 3.6 SP6
It is terminating and the service is restarting. This happens about 10-15 times a day. The message I get from the log is :
[22/Mar/2005:09:29:30] info: server terminating... each time it terminates.
I know for sure that this is no hardware issue (as I have changed the hard disk recently). My OS is win2000 server SP4 + all released patches from MS.
Also I have reinstalled the OS several times (clean install after format) and I got the same result.
Also I tried to use the proxy with/without LDAP server for authentication - the same.
Any suggestions/recommendations are mostly welcome.
Thanks in advance,
Kaloyan

Dear Kaloyan,
Migration to another proxy (e.g. ISA) seems to be quickest solution for your problem, as WebProxy doesn't work well on w2k platform.
Vladimir
P.S. Regards to Delyan :)

Sun Java System Web Proxy Server (4.0.2) - manage server will not start

In short here's the scenario and main problem.
a. Proxy admin server start - no problem
b. Create a new manage server (no proxying - just testing it) using different port. It just won't start. No logs produced either.
Here's the server.xml for the new manage server.
<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE SERVER PUBLIC "-//Sun Microsystems Inc.//DTD Sun Java System Web Proxy Server 4.0//EN" "file:///E:/Sun/ProxyServer40/bin/proxy/dtds/sun-web-proxy-server_4_0.dtd">
<SERVER>
    <PROPERTY name="accesslog" value="E:/Sun/ProxyServer40/proxy-server3/logs/access"/>
    <LS id="ls1" port="8083" servername="cbaob-b3-csddb1.adp1.cibc.pte"/>
    <MIME id="mime1" file="mime.types"/>
    <ACLFILE id="acl1" file="E:/Sun/ProxyServer40/httpacl/generated.proxy-server3.acl"/>
    <USERDB id="default"/>
    <FILECACHE enabled="true" maxage="30" mediumfilesizelimit="537600" mediumfilespace="10485760" smallfilesizelimit="2048" smallfilespace="1048576" transmitfile="false" maxfiles="1024" hashinitsize="0"/>
    <CACHE enabled="true" cachecapacity="2000" cachedir="E:/Sun/ProxyServer40/proxy-server3/cache">
        <PARTITION partitionname="part1" partitiondir="E:/Sun/ProxyServer40/proxy-server3/cache" maxsize="100" minspace="5" enabled="true"/>
<GC enabled="true" gchimargin="80" gclomargin="70" gcleavefsfull="60" gcextramargin="30"/>
    </CACHE>
    <LOG file="E:/Sun/ProxyServer40/proxy-server3/logs/errors" loglevel="finest"/>
</SERVER>
Nothing seems to be wrong with this. The XML format follows the specified DTD.
Would appreciate any help.
Thanks.

Thanks for your reply. Yes. This is really odd.
Anyway to make the whole story short, i uninstall this proxy server 4.0.2 on this server (say server1) and try to reinstall a new proxy 4.0.13 but having odd problem (i have administration rights)
Here it goes.
a. CMD java -version is 1.4.2_XX
b. Double click the proxy 4.0.13 setup.exe - nothing happen.
c. CMD setup --javahome c:\jdk1.6_XX - nothing happen
Here retrying.
a. Login to server2 and map conection to server1
b. Double click the proxy 4.0.13 setup.exe on server1 (while on server2) - setup.exe runs. This proves the proxy setup.exe on server1 is good.
c. Make a copy of proxy 4.0.13 on server2
d. Login to server1 and map connection to server2
e. Double click the proxy 4.0.13 setup.exe on server2 (while on server1) - setup.exe did not run.
Both servers are on the same domain and i'm using same ID to access both servers
Again, no logs on the windows events (security, application, system)
This is becoming mind a boggling mystery.
Any idea what's going on?
Thanks.

Routing problem with Web Proxy Server SP5 on AIX

I downloaded Sun Java System Web Proxy Server 3.6 Service Pack 5 and loaded it onto an AIX v4.3.3 server. Everything is configured correctly, and the server and admin functions start clean.
This server has two interfaces. One is an INSIDE interface that points toward our network. The other is an OUTSIDE interface pointed toward the Internet. When a user uses the proxy server, he queries the INSIDE interface at port 8080. At that point, the proxy server should contact the destination web address using the OUTSIDE interface on port 80. However,
a firewall log shows that the request that should be coming from the OUTSIDE is really originating from the INSIDE.
My routing table looks OK, but I wanted to prove it. So on the proxy server, at command line, I ran a ping and traceroute to www.sun.com. The firewall log showed that the attempts were correctly coming from the OUTSIDE interface. Yet, at my PC, I try to go to the www.sun.com from a browser, and the log shows that it is coming from the INSIDE.
Does anyone know why the port 80 relays are going out the wrong way?
Thanks to all in advance.
Bill

This also happens on Solaris. Suspect they are performing raw IP connections - and not paying particular attention to the server routing tables.

Issue with Sun Java Web Proxy Server

I am using Sun Java Web Proxy Server to test my webservice in https mode.(SSL mode).When i test the webservice in http mode,its working fine,but when I test it in SSL mode ,it is giving the following error:
Unable to tunnel through localhost:8082. Proxy returns "HTTP/1.1 403 Proxy denies fulfilling the request"
When I am requesting the webservice using the following parameters:
a)-Dcom.yodlee.soap.services.url=https://localhost:1080/yodsoap/services
b)-Dyodlee.sdk.https.proxyHost=localhost
c)-Dyodlee.sdk.https.proxyPort=8082
d)-Dcom.yodlee.soap.client.http11Enabled=1
this parameters is used to set the client http connection to HTTP1.1 by setting the HTTP_TRANSPORT_VERSION.
Detailed error message is as follows:
Caused by: java.io.IOException: Unable to tunnel through localhost:8082. Proxy returns "HTTP/1.1 403 Proxy denies fulfilling the request"
     at org.apache.axis.AxisFault.makeFault(AxisFault.java:129)
     at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:131)
     at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:71)
     at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:150)
     at org.apache.axis.SimpleChain.invoke(SimpleChain.java:120)
     at org.apache.axis.client.AxisClient.invoke(AxisClient.java:180)
     at org.apache.axis.client.Call.invokeEngine(Call.java:2492)
     at org.apache.axis.client.Call.invoke(Call.java:2481)
     at org.apache.axis.client.Call.invoke(Call.java:2176)
     at org.apache.axis.client.Call.invoke(Call.java:2099)
     at org.apache.axis.client.Call.invoke(Call.java:1622)
     at com.yodlee.soap.core.login.CobrandLoginSoapBindingStub.loginCobrand(CobrandLoginSoapBindingStub.java:225)
     at com.yodlee.soap.core.login.CobrandLoginSoapClientProxy.loginCobrand(CobrandLoginSoapClientProxy.java:119)
     ... 1 more
Caused by: java.io.IOException: Unable to tunnel through localhost:8082. Proxy returns "HTTP/1.1 403 Proxy denies fulfilling the request"
     at org.apache.axis.components.net.JSSESocketFactory.create(JSSESocketFactory.java:197)
     at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:157)
     at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:114)
     ... 12 more
This error message shows that its not able to get the socket connection to the server.Can anyone tell me the reason of it.
If you need any more info do let me know.
Regards,
Somendra

First of all, is there a reason why you are using jRockit?
Since the issue appeared after upgrading the windows, the issue would potentially be in the interaction between JVM and OS.
Also, there were some issues related to memory leak that were fixed in AS 8.2.
May be you should try with a Sun JVM and AS 8.2.

Web Proxy Server

an body explain me what is web proxy server ?

Motor,
the following is from the Web Proxy Sever Administration guide. Please, check the last paragraph for the explanation. Any how, the problem is simple. I am using the Proxy Server as the Reverse proxy. And at the same time, I would like to use two origin servers (for load balancing) instead of one. How do I make both load balancing and reverse proxy functions work together?
Thanks
To Create Regular or Reverse Mapping
Access the Server Manager, and click the URLs tab.
Click the Create Mapping link.
The Create Mapping page is displayed.
In the page that appears, provide the source prefix and source destination for the regular mapping,
for example,
Source prefix: http://proxy.site.com
Source destination: http://http.site.com/
Click OK.
Return to the page and create the reverse mapping, for example,
Reverse mapping:
Source prefix: http://http.site.com/
Source destination: http://proxy.site.com/
To make the change, click OK.
Once you click the OK button, the proxy server adds one or more additional mappings. To see the mappings, click the lView/Edit Mappings link. Additional mappings would be in the following format:
from: /
to: http://http.site.com/
These additional automatic mappings are for users who connect to the reverse proxy as a normal server. The first mapping is to catch users connecting to the reverse proxy as a regular proxy. The �/� mapping is added only if the user doesn't change the contents of the Map Source Prefix text box provided automatically by the Administration GUI. Depending on the setup, usually the second mapping is the only one required, but the extra mapping does not cause problems in the proxy.

Why doesn't Web Proxy Server use default route?

Similar Messages

Maybe you are looking for