Why doesnt my keyboard work anymore like i cant click it?
why doesn't my keyboard work anymore, I am not able to use the keyboard on certain parts of it, the whole top row of letters or anything wont work
I'm thinking that, it has gone bad.
If it is less than a year old and not abused, then it should be covered under Apple's one year warranty.
If it came with your iMac and you have Apple Care, then it should be covered for three years like your iMac.
To check your coverage, go to > https://selfsolve.apple.com/agreementWarrantyDynamic.do
Optionally any inexpensive generic USB keyboard will work, if you are not impressed with using or replacing yours with another expensive Apple one.
Similar Messages
-
HT4972 why doesnt my wifi work anymore now that i downloaded the new update?
after updating my phone to the new ios 6 the wifi doesnt work any more? any ideas on how to fix it?
Is a Norton update available yet?
If not, here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 4.
You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself! -
hello i have a problem with my fingerprint id its not working anymore like before his not recognised my finger anymore why ?
I have had to periodically delete and re-enter my fingerprint. The last update (7.1) may have improved that. You can delete by going to Settings > Touch ID & Passcode, enter your passcode and then tap "Turn Passcode Off" and then go back to the same area, put a passcode back on and then a fingerprint.
-
Why doesnt my shuffle, shuffle anymore?
why doesnt my shuffle, shuffle anymore?
I'm thinking that, it has gone bad.
If it is less than a year old and not abused, then it should be covered under Apple's one year warranty.
If it came with your iMac and you have Apple Care, then it should be covered for three years like your iMac.
To check your coverage, go to > https://selfsolve.apple.com/agreementWarrantyDynamic.do
Optionally any inexpensive generic USB keyboard will work, if you are not impressed with using or replacing yours with another expensive Apple one. -
Why doesnt the Blackberry work?
100's if not 1000's of people are having problems with there Black Berry phones.
Youll find search results such as Nuked berry, brick berry or dumb phone.
Blackberry technical support, had difficulty in handling an enquiry attempting to pass of the enquiry/complaint to the carrier who are not responsible for the incompetance of Blackberry, who call there faulty devices mobile/cell phones.
There simply not up to the standard of the rest of the world.
Why doesnt my phone work?
BB(Blackberry)'s Desktop Software, is not help, being unable to connect with my device, even though it detects it & erases files, & attempts to connect with the device, even though my computer immediately detects my device as soon as I plug it into the USB port.Hi and Welcome to the Community!
ChaserX wrote:
100's if not 1000's of people are having problems with there Black Berry phones.
Youll find search results such as Nuked berry, brick berry or dumb phone.
Blackberry technical support, had difficulty in handling an enquiry attempting to pass of the enquiry/complaint to the carrier who are not responsible for the incompetance of Blackberry, who call there faulty devices mobile/cell phones.
There simply not up to the standard of the rest of the world.
So thousands of problems, out of millions of users, dooms the entire brand? Seems like of bit of a stretch to me. Also irrelevant...only your specific issues matter, not the rest of the world.
ChaserX wrote:
Why doesnt my phone work?
BB(Blackberry)'s Desktop Software, is not help, being unable to connect with my device, even though it detects it & erases files, & attempts to connect with the device, even though my computer immediately detects my device as soon as I plug it into the USB port.
Your report is a little difficult to clearly understand...hence difficult to provide you with useful guidance. So, the simplest thing I can recommend is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Why is QuickTime not working anymore?
Why is QuickTime not working anymore?
Its working fine here.
Need more information, what problem are you having, what are you trying to do? -
Why do hyperlinks not work anymore
I use Adobe XI reader.
I have in one PDF several hyperlinks to mp3 files in the same directory as the PDF and one hyperlink to a Youtube URL.
They all used to work.
The mp3 hyperlinks called the Windows Media Player.
The YouTube URL calls the browser.
But now, the mp3 hyperlinks do not work anymore.
The Youtube URL still works.
The mp3 hyperlinks appear to be correct.
I have downloaded Adobe Reader XI again but that makes no difference.
Please Help!
Jan van Puffelen* I downloaded both files and moved them to My Documents.
* I tried to start the mp3 from the pdf
* It did not work and gave the error message after the initial
warning:
* Cannot find the file C:\440Hz_44100Hz_16bit_05sec.mp3
* I experimented a bit and I only got it to work when I moved the mp3
to C:\Documents and Settings.
* Then the example works both with Safe Mode switched off as well as
on.
I created a test pdf as well, called CD1.pdf
In my case the hyperlink in the PDF points to:
file:///C|Documents and Settings/Jan/Mijn Documenten/Spaans, Maçonnieke
Muziek, CD1.mp3
Both pdf and mp3 are in the same directory.
If Safe Mode is switched on, it does not work at all without any error
message
If Safe Mode is switched off, it works, however, it does not call the
Windows Media Player but the Browser.
In the CD1.doc version the hyperlink works correctly, it calls the Windows
Media Player
Can I send you my test doc, pdf en mp3? -
My Wlan isnt working anymore.. i cant turn it on anymore.Why?
Hi everybody, I really need your help! Since I've got the new iOS 6 my WLAN isnt working anymore. I can't even connect it with my internet at home because it is switched off and i cant slide the button to turn it on.. Can somebody please help me? I've already did a back up and set everything back but that didn't help either. (
Try this??
https://discussions.apple.com/message/18479234#18479234 -
help...i cant seem to sort this out and itunes are really doing my head in...keeps saying check you have the right version when i have the most up to date version of itunes, it tells me to restart the computer and i do..then it still doesnt work and now i cant even turn my iphone on without it wanting itunes and not moving past the page...i am seriously needing help before i go completely insane! it isnt working and i cant call vodafone or apple because it will not work at all and its not even a day old. I am near the end of my tether with this and i have never had this problem before, raging isnt even the word i would use to describe how i am feeling.
LelouchGeass wrote:
so if you have any ideas on whether i screwed up the inside or its because the screens cable is unattached please let me know.
Yes, you have screwed it up. Time to buy a new phone. -
Why doesnt my keyboard/sound work and my safari keep glitching?
my macbook pro has been messing up frequently for the last couple weeks. It started with some of the letters on my keyboard not working, but then a couple days later fixing itself. But now my shift button broke on its own so everything is in shift, my sound isnt working, and whenever I pull up safari it glitches and wont open the website I want. I have the newest software update and Ive tried to do everything I could to fix it. Does anyone have any idea as to why its messing up like this or what I should do ?
Hi audreyy1006. Now I don't know what year and model MacbookPro your using or what operating system. But I'll see if I can help.First go to you utilities folder/disk utilities and repair permissions and verify you hard disk. Then see it you can reset your pram. Command/Option/P/R while holding down the power button while starting. Hold them down for three Chimes and release.Then try this.http://support.apple.com/en-us/HT201295 On rare occasions the battery on Macbook can become swollen and effect the keyboard or track pad. I don't know if your is removable or not to check. Or you keyboard is faulty and needs replaced. The safari problem might be something else. You could open safari and look in the safari preferences under extensions and turn then off and see if that helps. One of your extensions could be an adware virus that redirects or stops web pages loading. If you have one I'd need to know what to say how to get rid of it.
-
Why wont my paddle work anymore in my flash catching game?
Hey guys im making a flash game for a uni project and i had it all working great! I then proceeded to move my code and content onto the second frame to add menus and such to the game and i updated all the code so it should work on the second frame and the game still works great apart from my paddle no long moving and i cant figure out at all what ive done.
this is the code for the actual game part of it. sorry for the clutter of it but im not good with code!
could anyone tell me what i need to do to get my paddle moving again!
//code!
import flash.utils.Timer;
import flash.events.KeyboardEvent;
import flash.events.MouseEvent
var keyArray : Array = new Array(false,false);//An array to check if keys are pressed
var ballSpeed : int = 5;//the speed of falling lemmings
var moveSpeed : int = 7;//the speed the player can move their boat at
boat.x = stage.stageWidth/2;//move the boat to the centre of the stage at the start of the game
var lives : int = 5;//the amount of lives the player will have
var score : int = 0;//the starting score a player has
var minSpawnTime : int = 1500;//the time it takes the lemmings to spawn
var maxSpawnTime : int = 3250;//maximum time before next lemming is spawned
var spawnTimer:Timer = new Timer(2000,1); //2 seconds and loops
lives_txt.text = "Lives Left: " + lives;//text box reads lives left
score_txt.text = "Score: " + score;//text box reads score
stop();
stage.addEventListener(KeyboardEvent.KEY_DOWN, keyPressed);//event listener to tell flash to call "key pressed"
stage.addEventListener(KeyboardEvent.KEY_UP, keyReleased);//event listener to tell flash to call "key released"
stage.addEventListener(Event.ENTER_FRAME, update);//event listener to tell flash to call "update" for new frames
startGame();//tells flash to call the startGame function
function startGame():void//a new function called startGame
spawnTimer.addEventListener(TimerEvent.TIMER, spawnBall);//new event listener to listen for the timer to run out and spawn new lemming
spawnTimer.start();//starts the clock on the timer
function keyPressed(event:KeyboardEvent) : void//a new function called keyPressed for when player uses arrow keys
if(event.keyCode == 39)//if the keyboard event is the right key
trace("right");//prints right in output window
keyArray[0] = true;//right key array is true
if(event.keyCode == 37)//if the keyboard event is the left key
trace("left");//prints left in output window
keyArray[1] = true;//left key array is true
function keyReleased(event:KeyboardEvent) : void//a new function called keyReleased for when arrow keys are released
if(event.keyCode == 39 )//if the keyboard event is the right key
keyArray[0] = false;//right key array false
if(event.keyCode == 37)//if the keyboard event is the left key
keyArray[1] = false;//left key array false
function update(event:Event) : void//a new function called update for updating the x position of the boat
if(keyArray[0] == true)//if the keyArray for left is true
boat.x += moveSpeed;//move the x position of the boat right with the designated move speed
if(keyArray[1] == true)//if the keyArray for right is true
boat.x -= moveSpeed;//move the x position of the boat left with the designated move speed
function spawnBall(event:TimerEvent): void//a new function called spawnBall
trace("SPAWN");//prints SPAWN in the output
var ball : Ball = new Ball();//declares a new "temporary variable called "ball" that stores object of Type:Ball and populates it with a new object Ball
stage.addChild(ball);//adds this new ball onto the stage
ball.y = 0;//set the ball's vertical position to fall from
ball.x = ball.width + (Math.random() * (stage.stageWidth - (2*ball.width))); //sets the ball to have a random position on the x axsis so they seem to fall randomly
ball.addEventListener(Event.ENTER_FRAME, moveBall); //new event listener for the ball to listen for a new frame and to call the "moveBall" function
spawnTimer.reset(); //resets the spawnTimer so it can be re-started
spawnTimer.delay = minSpawnTime + (Math.random() * (maxSpawnTime - minSpawnTime) ); //set the delay for the next time to be somewhere between the minSpawnTime (1.5 seconds) and maxSpawnTime (3.25 seconds)
spawnTimer.start();//tell the spawnTimer to start again
if((maxSpawnTime - 20) >= minSpawnTime) //if the maximum time between spawn times is too close to the minimum time between spawns
maxSpawnTime -= 20;//drop the minimum time between spawns by 20
function moveBall(event:Event):void //new function called "moveBall" takes up 1 argument "event"
event.currentTarget.y += ballSpeed; //move the object this functions event listener by the speed set.
if(event.currentTarget.hitTestObject(sea)) //if the lemming falls and hits the sea object
if(this.currentFrame == 2)//and we are still on frame 2
lives--;//take 1 life away from player
if(lives > -1)//if the player still have lifes
//set the text box to display the amount of lives remaining
lives_txt.text = "Lives Left: " + lives;
if(lives < 0)//if the player has less than no lives game is over
stage.removeEventListener(KeyboardEvent.KEY_DOWN, keyPressed);//take away event listeners for key presses and releases
stage.removeEventListener(KeyboardEvent.KEY_DOWN, keyReleased);
stage.removeEventListener(Event.ENTER_FRAME, update);//remove the update event listeners
spawnTimer.stop();//stop the timer
gotoAndStop(3);//tell flash to go to and stop on the loser screen
event.currentTarget.parent.removeChild(event.currentTarget);//remove the falling objects from the game
event.currentTarget.removeEventListener(Event.ENTER_FRAME, moveBall);//remove eventlistener for when game is over updating falling objects
else
if(this.currentFrame == 2)//if the player is still in game
if(event.currentTarget.hitTestObject(boat))//if eventListener is attached to hits the game object called "boat"
score++;//add 1 to the players score
score_txt.text = "Score: " + score;//update the score text to read the players score
event.currentTarget.parent.removeChild(event.currentTarget);//remove remove the lemming after it has hit boat
event.currentTarget.removeEventListener(Event.ENTER_FRAME, moveBall);//remove the eventlistener after caught so it doesnt keep updating
if(score > 24)//if the player has more than 24 points
stage.removeEventListener(KeyboardEvent.KEY_DOWN, keyPressed);//take away event listeners for key presses and releases
stage.removeEventListener(KeyboardEvent.KEY_DOWN, keyReleased);
stage.removeEventListener(Event.ENTER_FRAME, update);//remove the update event listeners
spawnTimer.stop();//stop the timer
gotoAndStop(4);//tell flash to go to and stop on the 3rd frame of the time line i.e. the Game Over screentried commenting them out doesnt effect it either...
this is what the code now looks like with everything that should remove the key presses commented out
import flash.utils.Timer;
import flash.events.KeyboardEvent;
import flash.events.MouseEvent
var keyArray : Array = new Array(false,false);//An array to check if keys are pressed
var ballSpeed : int = 5;//the speed of falling lemmings
var moveSpeed : int = 7;//the speed the player can move their boat at
boat.x = stage.stageWidth/2;//move the boat to the centre of the stage at the start of the game
var lives : int = 5;//the amount of lives the player will have
var score : int = 0;//the starting score a player has
var minSpawnTime : int = 1500;//the time it takes the lemmings to spawn
var maxSpawnTime : int = 3250;//maximum time before next lemming is spawned
var spawnTimer:Timer = new Timer(2000,1); //2 seconds and loops
lives_txt.text = "Lives Left: " + lives;//text box reads lives left
score_txt.text = "Score: " + score;//text box reads score
stop();
stage.addEventListener(KeyboardEvent.KEY_DOWN, keyPressed);//event listener to tell flash to call "key pressed"
stage.addEventListener(KeyboardEvent.KEY_UP, keyReleased);//event listener to tell flash to call "key released"
trace(this); // if you fail to see this trace the playhead is not entering this frame and is executing none of this code.
stage.addEventListener(Event.ENTER_FRAME, update);//event listener to tell flash to call "update" for new frames
startGame();//tells flash to call the startGame function
function startGame():void//a new function called startGame
spawnTimer.addEventListener(TimerEvent.TIMER, spawnBall);//new event listener to listen for the timer to run out and spawn new lemming
spawnTimer.start();//starts the clock on the timer
function keyPressed(event:KeyboardEvent) : void//a new function called keyPressed for when player uses arrow keys
trace("keyPressed",event.keyCode);
if(event.keyCode == 39)//if the keyboard event is the right key
trace("right");//prints right in output window
keyArray[0] = true;//right key array is true
if(event.keyCode == 37)//if the keyboard event is the left key
trace("left");//prints left in output window
keyArray[1] = true;//left key array is true
function keyReleased(event:KeyboardEvent) : void//a new function called keyReleased for when arrow keys are released
if(event.keyCode == 39 )//if the keyboard event is the right key
keyArray[0] = false;//right key array false
if(event.keyCode == 37)//if the keyboard event is the left key
keyArray[1] = false;//left key array false
function update(event:Event) : void//a new function called update for updating the x position of the boat
trace(keyArray[0],keyArray[1]);
if(keyArray[0] == true)//if the keyArray for left is true
boat.x += moveSpeed;//move the x position of the boat right with the designated move speed
if(keyArray[1] == true)//if the keyArray for right is true
boat.x -= moveSpeed;//move the x position of the boat left with the designated move speed
function spawnBall(event:TimerEvent): void//a new function called spawnBall
trace("SPAWN");//prints SPAWN in the output
var ball : Ball = new Ball();//declares a new "temporary variable called "ball" that stores object of Type:Ball and populates it with a new object Ball
stage.addChild(ball);//adds this new ball onto the stage
ball.y = 0;//set the ball's vertical position to fall from
ball.x = ball.width + (Math.random() * (stage.stageWidth - (2*ball.width))); //sets the ball to have a random position on the x axsis so they seem to fall randomly
ball.addEventListener(Event.ENTER_FRAME, moveBall); //new event listener for the ball to listen for a new frame and to call the "moveBall" function
spawnTimer.reset(); //resets the spawnTimer so it can be re-started
spawnTimer.delay = minSpawnTime + (Math.random() * (maxSpawnTime - minSpawnTime) ); //set the delay for the next time to be somewhere between the minSpawnTime (1.5 seconds) and maxSpawnTime (3.25 seconds)
spawnTimer.start();//tell the spawnTimer to start again
if((maxSpawnTime - 20) >= minSpawnTime) //if the maximum time between spawn times is too close to the minimum time between spawns
maxSpawnTime -= 20;//drop the minimum time between spawns by 20
function moveBall(event:Event):void //new function called "moveBall" takes up 1 argument "event"
event.currentTarget.y += ballSpeed; //move the object this functions event listener by the speed set.
if(event.currentTarget.hitTestObject(sea)) //if the lemming falls and hits the sea object
if(this.currentFrame == 2)//and we are still on frame 2
lives--;//take 1 life away from player
if(lives > -1)//if the player still have lifes
//set the text box to display the amount of lives remaining
lives_txt.text = "Lives Left: " + lives;
if(lives < 0)//if the player has less than no lives game is over
//stage.removeEventListener(KeyboardEvent.KEY_DOWN, keyPressed);//take away event listeners for key presses and releases
//stage.removeEventListener(KeyboardEvent.KEY_DOWN, keyReleased);
stage.removeEventListener(Event.ENTER_FRAME, update);//remove the update event listeners
spawnTimer.stop();//stop the timer
gotoAndStop(3);//tell flash to go to and stop on the loser screen
event.currentTarget.parent.removeChild(event.currentTarget);//remove the falling objects from the game
event.currentTarget.removeEventListener(Event.ENTER_FRAME, moveBall);//remove eventlistener for when game is over updating falling objects
else
if(this.currentFrame == 2)//if the player is still in game
if(event.currentTarget.hitTestObject(boat))//if eventListener is attached to hits the game object called "boat"
score++;//add 1 to the players score
score_txt.text = "Score: " + score;//update the score text to read the players score
event.currentTarget.parent.removeChild(event.currentTarget);//remove remove the lemming after it has hit boat
event.currentTarget.removeEventListener(Event.ENTER_FRAME, moveBall);//remove the eventlistener after caught so it doesnt keep updating
if(score > 24)//if the player has more than 24 points
//stage.removeEventListener(KeyboardEvent.KEY_DOWN, keyPressed);//take away event listeners for key presses and releases
//stage.removeEventListener(KeyboardEvent.KEY_DOWN, keyReleased);
stage.removeEventListener(Event.ENTER_FRAME, update);//remove the update event listeners
spawnTimer.stop();//stop the timer
gotoAndStop(4);//tell flash to go to and stop on the 3rd frame of the time line i.e. the Game Over screen -
Hello all
I am trying to include a header file in my jsp page, and then include a servlet on another server. Question is, is this possible? In my code below, the header file is shown but the results of the servlet, which resides on a different server, are not. Any idea why the second line doesnt work?
Thanks in advance for any help.
<%@ include file="header.jsp" %>
<jsp:include page="http://differentserver:1080/servlet/Docu?dir=AdminProc" flush="true" />Thanks for the clarification. I am actually trying to convert some PHP to JSP, and idea what the equivalent of
<?php
include("header.php");
include("http://differentserver:1080/servlet/DocuServ?dir=Procedures");
?>
is in JSP? -
Why doesnt the webcam work on my DV6 I have downloaded the driver again but still no good
Still no answers about why it doesnt work it seems crazy that this isnt simply solved, it doesnt leave a good impression of HP. Oh and the USB ports stiill dont work despite troubleshooting, reloading and downloading drivers. Not a good impression at all
You can try removing the app and reinstalling; that sometimes cures the problem. If not, then contact the developer as diesel suggested.
http://www.getapp.net/#contact
Good luck. -
When I am at school, I get the schols wifi and when I'm walking home I get the wifi of the neighborhood. As I get closer to my house my wifi pops up but the moment I set itno the house all five of our wifi's are gone and wont come back. So basically I get wifi everywhere but my house. It's just my iphone 4 too! My Mothers ipod and latop, my brothers Iphone and laptop and MY OWN laptop is connected to the wifi. It always worked until now! Also my phone as recently suffered from water damage a few weeks back but the wifi still worked after that, it's just been recently! Sorry for all the typing but Im hoping someone could helo me please!!!!
Hello dlanibarnhill,
Thank you for using Apple Support Communities!
So it sounds like suddenly your wifi at home is not being seen by just this 1 device.
I found this article about troubleshooting wifi connectivity on an ios device.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.If unable to do so, see this article.
Confirm that your Wi-Fi router and Cable or DSL modem are connected to power, turned on, and indicate that they are connected to the Internet.If not, refer to your network administrator or ISP for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you are connected. Then tap and Forget this Network. Try to connect to your desired Wi-Fi network again.
Note: You will need to enter your Wi-Fi password again if your desired network requires one.
Turn your Wi-Fi router off and then on again2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2.For AirPort Base Stations, see this article for information about firmware updates.
If needed, I would do this troubleshooting next:
Unable to locate a Wi-Fi network
Check to see if the network is available by tapping Settings > Wi-Fi and choosing from the available networks listed there.
Note: It may take a few seconds for the Wi-Fi network name to appear.
Move closer to your wireless router ( access point) and attempt to locate the Wi-Fi network again.
If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
Cheers,
Sterling -
well~ just got the s4 was happy about getting it till i actually started using it.
wifi doesnt work, text wont send, and heats up around the camera area after just about 1 minute use.... =.=
i have tried factory reset and any other way i can think of but none of them works! plz help meh~Hello Sonokongo13,
I am so sorry to hear that you are having issues with your Samsung Galaxy S4. I want to make sure you are able to fully enjoy the device and all of its great features. When was the device purchased? If the device is purchased within the 14 day worry free guarantee. You can return the device and exchange it for a brand new handset.
WarrenM_VZWSupport
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
How do I stop iCal from changing the server path of CalDAV accounts?
I'm using Davical as a calendar server for our family. Some may wonder why I use Davical and not iCloud. I do for one reason...there is no way to disable getting other users' alarms on the iPhone. I want to be able to view my wife's calendar but not
-
Troubleshooting: Memory Quick Check : Failed
Before I explain the current problem, I will explain what I have done so far: I have replaced the hard drive. Hard drive is accessable and working. Placed the installation disk on a USB (Windows 7 Disk I had was not compatible) After having the setup
-
Why can't they uses the swipe feature like they do for multiple pages of apps? It gets frustrating having a whole bunch of folders that have the same content.
-
IWeb not capable of online store, what is?
Hi folks, I know iWeb is not capable of doing an online storefront, least that's what I read. What mac software out there can? Looking to start an online business and wondering if there is some software I can use. Any info would be appreciated. Thank
-
When editing (eg.) multitracked drums on one group and multiple tracks (in this case midi regions for triggering gates) on another group I find that if I do a quick swipe of regions from both groups only one group will fully select - the other (actua