Why doesnt the smart filter mask move with the smart object?

OMG Why doesnt the smart filter mask move with the smart object? Yikes Way PITA

If you look at the other tread about transform Again and smart Object layers you will find I found there seems to be two flavors of Transform and some bazar behaviors when it come to smart object layers. http://forums.adobe.com/message/4611500#4611500
However for this problem here I think I can not show you how to do it.
First target the smart filters Mask. In fact so you can see what is happening Alt+Click on it so Photoshop displays the mask rather then the the composit image. Then use Ctrl+T free transform then just for a test hold down the Ctrl and the Alt keys and drag in a cornor to constrain and srink the Mask thee release the keys and press enter to commit the transform.
Next target the smart object layer then use the short cut Ctrl+Shift+T (Transform Again) on a PC the smart object layer will be transformed to match the filter mask transform.

Similar Messages

Can I lock the volume curve to the track so it moves with the track?

I can't seem to move the volume curve when I move the section or track. Is it possible to lock the volume curve to the track or section? Otherwise I have to recreate the curve for that section or track which seems so completely inefficient that I can't imagine that is how it is supposed to be done.
Thank you!

here, this should help:
http://www.bulletsandbones.com/GB/Tutorials.html#bsqmovingcurves

HT1212 I have no idea why suddenly my iPhone5 will not move past the Password screen; also, a voice describes each button I touch, and ends with "screen locked" (not "phone locked").

I have no idea why my iPhone5 suddenly will not move past the PW screen; a "voice" identifies each button touched (the Slide button, for example) or the PW buttons, and then ends with "screen locked" (not phone locked).

I believe you have Voice Over on:
You have to tap, then double-tap to select the numbers to enter your passcode.
Then:
Press Home.
Tap Settings. Then double-tap Settings.
Tap General. Then double-tap General.
Use three fingers on the screen to scroll to Accessibility.
Tap Accessibility. Then double-tap Accessibility.
Tap VoiceOver. Then double-tap VoiceOver.
Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.

Why when I move a midi event in the piano roll the film does not move with this event?

LOGIC X 10.0.3. Why when I move a midi event in the piano roll the film does not move with this event?

Film? Have you dropped a movie file into your Logic project as well? You need to be a little clearer.

HT4818 why doesnt the new macbook pro come with the windows installation disc?

why doesnt the new macbook pro come with the windows installation disc?

Because it is a Microsoft product. it must be purchased separately.

Why does my iPods background move with the movement of the device?

I noticed something wierd with my iPods background. When I tilt the device up and down vertically the background moves with the device and the apps stay still. Is this supposed to happen? And if so what feature of the device causes this.

Sounds like you have dynamic wallpaper turned on/using one.
Go to Settings>Wallpaper and check/change.
Do you have iOS 8
You say 7.1.2.

Lightroom ignores smart filter masks

I just noticed the following problem after upgrading from LR4 to LR5:
- Select RAW (.CR2) file in LR5
- Edit in -> Open as Smart Object in Photoshop (CS6)
- Apply smart filter
- Use smart filter mask to apply filter to portion of image
- Save
When viewed and exported as a .jpg in LR5, the filter effect is not masked, but applied to the entire image. The .jpg saved directly from CS6 is correctly masked. As a workaround, the smart layer can be duplicated and rasterized. Is this a defect introduced in LR5?
Update 6/27/2013:
The problem also exists in LR4
It is not related to RAW, or Open as Smart Object from LR. It can be reproduced by:
- create a new image in Photoshop CS5 or CS6
- convert to smart object
- apply smart filter (something noticeable, like solarize)
- add a smart filter mask for a portion of the image
- save as a .psd
When imported into LR4 or LR5, the smart filter mask is ignored, and the filter is applied to the entire image.
Can anyone else reproduce this problem? Is it a known limitation of LR?
Message was edited by: keg415

I doubt it. When you operate on the layers level, all you have is pixel values of the individual layers without one layer knowing about the other. Filter chaining outside of what smart objects offer would require a much different approach to the whole matter and then we talk about a workflow similar to node-based compositing applications, where each processing operation is concatenated with the previous one in terms of how the code runs under the hood. Not something that will happen any time soon in PS, I think.
Mylenium

Scripting brush strokes on smart filter mask

Hi guys, I am a complete newbie to all this so forgive me if this is a stupid question.
I am having problems when trying to record brush strokes on a smart filter mask using script listener. Is this possible? Is there some trick to it?
Cheers,
Philip

I can be wrong, but I remember somewhere on ps-script Xbytor writing about it.
ScriptingListener can't record brush strokes - afaik, according to Chris Cox, this would clog the log - but there's an "Allow tool recording" option in the Actions palette that should do the trick.
A workaround could be to record the brush into an Action, then parse the action with XTools and grab the raw data stream from the generated JS. Never attempted to try, but in principle should work.
Best
Davide

Resizing or moving an opacity mask along with the items inside it

I'm trying to resize a opacity mask by doing
transMaskItem.resize(
10, //scaleX,
10, //scaleY,
true, //[,changePositions]
true, //[,changeFillPatterns]
true, //[,changeFillGradients]
true, //[,changeStrokePattern]
0.1, //[,changeLineWidths]
This resizes the item, but it does not resize the item inside it. I tried similar command with the translation command
transMaskItem.translate(
100, //([deltaX]
100. //[,deltaY]
True, //[,transformObjects]
True, //[,transformFillPatterns]
True, //[,transformFillGradients]
True, //[,transformStrokePatterns])
and similar thing happened. The item gets moved, but the object inside it doesn't.
How do I resize or translate an opacity mask along with the items inside it?

I see...it seems to be a bug, the actual mask gets ignored. Probably to be consistent with the user interface, you can not select the mask with the mouse either.
maybe someone else has found a way to work with Opacity Masks, I haven't.
as a side note, there's no need to select the objects in order to size them or move them, you can just reference them. Also, there's no "Selected" object, change that to "selection".

Photoshop CC v 14.0 for Mac-Smart Filter Masking

I have a standalone Photoshop CS 6 v 13.05 and a Photoshop CC v 14.0 both running on the same MacPro using OS x 10.8.4.
The Smart Filter Masking by painting in the standalone version of Photoshop CS 6 works perfectly.
However, try as I might I just cannot get my smart filter/s masked by painting in them in the Photoshop CC version.
Is there a switch or setting somewhere that I’m missing? Checked everywhere I can think of.
Any tips

I'm moving this post from this forum for photoshop-dot-com (an online portal) to the correct forum for Photoshop pro users like yourselves.
FYI, the correct forum URL is: http://forums.adobe.com/community/photoshop
Since you've posted in this forum for Photoshop.com, you may receive additional posts in this forum unless you update your profile. After signing in on these forums, go to Your Stuff > Forums, and disable any forum you don't want to watch.
Kind regards,
Charlie

Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

Many, many thanks for both of you Todd and Rick.
to Rick:
I suppose you mean the Color Settings in Project Settings as follows:
- Working Space: None
- Match Legacy ... Gamma Adjustments checked ON
But it does not correct the colors in effects. And checking or unchecking Make Movie/Output Module Settings/Color Management/Profile/Preserve RGB does not make any difference.
to both of you:
Those parts of the video image that does not have color effects are just fine. In these parts the color is preserved when reimporting to FCP. However, those parts having color effects (except Levels, as decribed earlier) have altered color results. So, only the parts having effects affecting color are misinterpreted in the image area. The mismatch is of course seen in AE, before making the movie.
What I ment with "Color Management not working properly" is that (instead of "disabling" it) Color Management does not seem to be able to correct this "misinterpretation" or difference in effect handling between AE 6 and 10.
So, would you have any solution for this problem?
Again, many thanks for your fast replies!

HT201209 I bought a movie with the digital copy and it gives me option to redeem it with iTunes, but when I type in the redeem code it shows a message saying: you must insert your digital copy dvd in the computer in order to redeem this code" . The dvd is

I bought a movie with the digital copy and it gives me option to redeem it with iTunes, but when I type in the redeem code it shows a message saying: " you must insert your digital copy dvd in this computer in order to redeem this code" . The dvd is in. WTH? This is especially with FOX movies, I never have trouble with Universal Picture movies.

Thanks for your reply, but you might have misunderstood it a bit. I'm NOT trying to buy a movie. ****, I'm not even in the actual Apple Store, when this happens I'm in the library not the Store part of iTunes.
To clarify - I have purchased a physical copy of a movie which came with another physical copy which contains the digital copy. The digital copy is on the DVD, all I need is just to transfer this file to my iPod Touch, for example, I'm not trying to download it from the store or repurchase it and it's not any gift code that I've received, the digital copy is on the disc. This is the first time ever that I've purchased something on a disc and I'm not allowed to access it because the disc hasn't been purchased within my country.
So again - I'm not attempting any purchase or download any purchased digital copy - it's on a DVD I own physically so... why is even the region of my Store relevant, the code I enter is (as I assume) just supposed to check if it's a legal genuine copy (which it is, as I've said - there are 6 discs in the pack: 3 movies on 3 Blu-rays and 3 DVD containing these digital copies of them). If I own it, I think that's proof enough that I have the right to use it. I just don't get it. I fully agree with you and understand your point if there was any purchase going on here, but it's not, it's just - I put a disc into my computer and I can't access it

HT4528 Why doesnt my iphone 4 from Verizon have the FCC ID text on the back?

Why doesnt my iphone 4 from Verizon have the FCC ID text on the back?

Because you or someone replaced the back with an aftermarket piece maybe?
Why does it matter?

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille

PS CS5 Extended on Windows - When trying to use the clone stamp and/or healing brush as soon as I move the cursor over the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush. W

PS CS5 Extended on Windows
When trying to use the clone stamp and/or healing brush as soon as I move the cursor from the toolbar over to the image I get an exact copy of the existing layer that moves around the window with the movement of the clone stamp/healing brush. This just started tonight. What's causing this weird behaviour?

What are the settings in Window > Clone Source?

Why doesnt the smart filter mask move with the smart object?

Similar Messages

Maybe you are looking for