Why don't ALL pages process and print in iphoto when creating a book?

I have created a book using iphoto 6. All the pages are there when I see them on the screen, but when I go to assemble the book and do the preview as suggested before ordering only the first 20 pages are there. The last 20 pages are missing.
If I save as pdf file the same thing happens only the first 20 pages are there.
Any suggestions? Any Ideas?

That issue was discussed in the iPhoto 6 forum at length. I don't remember the exact topic but you can search in the iPhoto 6 forum and find the thread.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Similar Messages

  • HT4436 Why don't all my contacts and calendar events on my iMac (version 10.7.4) stream onto iCloud? For instance, there are 470 entries in my address book but only 270 on iCloud. And not all my appointments in iCal are transferred.

    Why don't all my contacts and calendar events on my iMac (version 10.7.4) stream onto iCloud? For instance, there are 470 entries in my address book but only 270 on iCloud. And not all my appointments in iCal are transferred either.
    I have the same problem transfering Address book on iMac to contacts on iPhone (old version 3G - on iCloud). this is a hard wired connection

    Might you have 200 entries in On My Mac groups and some of your appointments in On My Mac calendars?

  • "Use condition indicators" and "Print setting" errors when updating FM book

    I recently updated the designs of some templates used in our FM books. I created a sample manual using the new templates to test it out. When updating the book, I get the following errors. I have fixed errors before, but I've never seen these ones.

    Hi priya,
    Not sure: check syntax in your Update Roules, also at level of start routine.
    Ciao.
    Riccardo.

  • HT1338 I can't update my laptop why is it? I di all the process and it says it should restart with a gray screen and a status bar and it does not it just goes back to the regular screen

    I can't update my laptop why is it? I di all the process and it says it should restart with a gray screen and a status bar and it does not it just goes back to the regular screen

    You will need to contact support to have your account sorted.
    https://expresslane.apple.com/GetproductgroupList.action

  • How do you improve the speed of processing and printing of PDF from CAD in indesign?

    I work for an engineering consultancy company and for a long while I have suffered with using PDFs files generated from AutoCAD when placed within an InDesign report. There are three issues that arise:
    The files take a long time to process when preparing the InDesign report. (This is mainly in high quality preview mode)
    The files take a long time to export to PDF
    (The most annoying one) The files take a long time to process and print when sent from the PDF to the colour laser printer. So much so, a single page from InDesign that contains a PDF generated from CAD can take up to 15 mins to print.
    I have tried converting the PDFs to jpegs prior to insertion into the InDesign document, but the quality and colour is dramatically reduced thus them useless. Is there any pre processing on the PDFs generated from CAD that I can do to reduce the impact that it has within InDesign and in the post processing?
    We also get missing font warnings that arise from the inserted PDFs from CAD that may or may not be an issue. Your advice here would also be appreciated.
    I would be the first to admit that I am not the most advanced user of InDesign though I am sure that my workflow could be improved to alleviate the situation.
    Your assistance would be appreciated!

    Thanks for your quick response.
    I have tried both options you have recommended, but unfortunately the file size doesn't seem to be the issue. Most of our CAD files (except for when they contain raster backgrounds) are around 0.5-2Mb which isn't massive compared to some jpegs. The PDF optimization process does make a small difference to the file size but only in the region of perhaps 5% reduction.
    If it helps the most awkward file I am using at the moment has this audit result, pre-optimization. This is typical of the CAD files produced by AutoCAD. As you can see the content streams take up the highest percentage that doesn't reduce that much even when the optimizer has all options engaged.
    What do you think?

  • Why don't match the values of printer ports, obtained through WMI in different ways?

    Why don't match the values of printer ports, obtained through WMI in different ways?
    $Ports = Get-WmiObject Win32_TcpIpPrinterPort -namespace "root\CIMV2" -ComputerName $ComputerName
    $Printers = Get-WmiObject Win32_Printer -namespace "root\CIMV2" -ComputerName $ComputerName
    Further, for example, on the same computer $Ports.Name returns me: (10.0.66.204 10.0.66.210 10.0.66.246 10.0.66.247)
    and $Printers.PortName (XPSPort: USB001 10.0.66.247 HPLaserJet400MFPM425dn 10.0.66.246 SHRFAX :) I.e. the values don't match to each other although they logically should be the same. Why so?
    In the end I need to get a binding the printer - the value (not the name) of the port. In Win32_Printer there is no such parameter, and there is no information about the printer in Win32_TcpIpPrinterPort. I wanted to connect them through port name but they
    don't match.

    Very unclear.
    Win32_Printer returns the bound port name.
    Get-WmiObject win32_tcpipprinterport -filter "Name='192.168.1.100_2'"
    ¯\_(ツ)_/¯

  • Why don't pictures from a slideshow made in iPhoto and then burned on to a DVD in iDVD not use the full screen?

    Why don't pictures from a slideshow made in iPhoto and then burned on to a DVD in iDVD not use the full screen?

    All I want to do is send my family the pictures for them to be able to see them on most dvds and use manually control.
    If you want set top DVD player playback, I suggest you create a a series of slideshows IN iDVD that each contain a MAXIMUM of 99 images. Do not create the slideshow in iPhoto or iMovie.
    Is there an easier way to do this, bypassing iDVD?
    Some DVD players will play a disc containing jpeg images

  • Why don't all the mailboxes illuminate when I'm trying to move/ save an email

    Why don't ALL mailboxes highlight when I'm trying to save something

    You can either leave it in the Inbox or move it to one of the non-greyed out folders. If you havn't got any non-greyed out ones then if your email account is an IMAP one then you should be able to login to your account on a browser and create new folders there, and they should then appears in the Mail app. If it's a POP type account then unfortunately you're stuck with what you've got.
    You can also, for example, copy-and-paste it into another app e.g. if it's plain text you could copy-and-paste it into Notes

  • Need a list of all services, processes and servers

    Hi experts,
    i'm totally new to this but i need a list of all services, processes and servers. Is there a easy way to get them?
    I try to create a tool where you are able to virtually shutdown servers and then you can see what happends to the services and processes. Hope someone can help me.
    Thanks
    btw - sorry for my english

    i'm not sure if you all understand what i'm trying to do so i'll ty to explain it
    first i'll try to explain how i understand SOA
    - there are several servers on which the services run
    - a service is only runnable if his server is active
    - a process consists of several services
    - if one of these services isn't runnable anymore the whole process isn't runnable too
    - there are user who use one or more processes
    - if one of the used processes is not able to run the user will be affected
    the tool i'm trying to write should automatically import the descriped information (server-, service-, process- and userlists) from a given SAP-Systemand then you can switch virtually a server to see which services, processes and user would be affected.
    This would be fine if you want to shut down a server for maintance work or something like that.
    so i hope you understand my problem and you are able to help me
    again i want to excuse for my english and my wimpy knowledge about the SOA Architecture of SAP

  • Why don't my iPhone 6 and macBook Air calendars sync?

    Why don't my iPhone 6 and MacBook Air calendars sync via iCloud or when connected?

    Hi Hooperi,
    If you're experiencing issues with iCloud Calendar syncing between your Mac and iPhone, then follow the directions in the article below.
    iCloud: Troubleshooting iCloud Calendar - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • I uninstalled my firefox cause I edited something I shouldn't have why is it all my extension and bookmark didn't disappear?

    I uninstalled my firefox cause I edited something I shouldn't have why is it all my extension and bookmark didn't disappear?. If those didn't reset to zero then did the files I edited in firefox didn't disappear?.

    What kind of change(s) did you make?
    *https://support.mozilla.org/kb/Basic+Troubleshooting
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox
    Firefox stores your personal data in the Firefox profile folder and that data is not affected by an uninstall and reinstall.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Why don't all iTunes movies have subtitles?

    How can you tell if an iTunes download has subtitles?
    Why don't all the downloads have subtitles?

    Welcome to the Apple Community.
    It's not Apple's decision, they get the movies the way the studios prepare them.

  • My Macbook Pro *****! I have had it for 2 weeks now, got it brand new at the apple store, it freezes all the time, and reboots itself, sometimes when i start it, purple dots cover the screen and i have to hold the power button.

    I have had it for 2 weeks now, got it brand new at the apple store, it freezes all the time, and reboots itself, sometimes when i start it, purple dots cover the screen and i have to hold the power button. a 2 week old computer is not supposed to do this! it wastes all its time being so flashy that it just craps out all the time. sometimes i feel like i should have stayed with my virus covered PC. at least when it shut down randomly you could turn it back on, but with the macbook pro, it just keeps restarting itself over and over. need help with this, any answers?

    Here's a novel thought. Take it back to the vendor. Should have done that one week ago.

  • Why do i get 2 curves and not just 1 when i create a diagram from a row of data in a table ?

    Why do I get 2 curves and not just i when I create a diagram from a row af data in a table ?

    Erik,
    Thank you for giving me the points.  Generally you wait to award points until your problem is solved.  It is totally your at your descretion.
    OK.
    This is still not clear.  To post a screenshot get the "stuff" you want to show in view on your screen, then type the key combination <Command>+<Shift>+3.  The cursor will change to a crosshair.  Click and hold on the top-left corner, then drag to enclose what you want to show (to the bottom-right corner), then release.  The screenshot will appear on your desktop and will be named something like "".
    Now click the camera icon in the tool bar for this forum:
    , click the text box to allow you to navigate to, and select your screenshot.
    Here is what you sent me:
    The graph does not seem to be associated with the table of data you are showing.  Generally when you highlight a graph the corresponding table will highlight and show the source of each of the series in the graph (dark and light blue).
    This is what I would expect to see when highlighting a graph:
    Right now I think there is ANOTHER table arround that is the source for the graph and the table you show is "just another table".  You can move your data into the table the graph refers to by copy and paste, or simply typing the values.  You can change how many series there are by grabbing the little circle at the bottom right of the highlighted cells (when you have the graph highlighted) and dragging as shown:
    The Numbers Users' Guide is a great resource you should utilize and can be found here:
    http://support.apple.com/manuals#macosandsoftware
    The chapter on graphing (or charting) is 7 and starts on page 134.

  • I moved all my photos and videos from iPhoto to external hard drive and now can't play any videos. Please help!!!

    I moved all my photos and videos from iPhoto to external hard drive, then totaly formated my macbook and now trying to play videos of external hard drive, but they wont play and they in "quicktime containers" and really small in size (50 - 150 Kb). Please Help!!! My misuse will kill me if find out that we have no more videos from our honeymoon...

    I moved all my photos and videos from iPhoto to external hard drive, then totaly formated my macbook and now trying to play videos of external hard drive, but they wont play and they in "quicktime containers" and really small in size (50 - 150 Kb). Please Help!!! My misuse will kill me if find out that we have no more videos from our honeymoon...
    You may need to prepare yourself for a "World of Hurt" from your wife...
    Since the average 0.9 megapixel JPEG photo file of normal graphic complexity stored at a high quality compression setting is 125-135 KBs in size, I would have to assume any QT video files you created of more than a fraction of a second in duration were most likely saved as "reference" files to only be 50-150 KBs. Basically, a reference file is q QT (MOV) file that tells a video player how to play data that is still stored in its original source file container(s). For instance, you could trim and merge a number of files together and save the result as a "reference" file that takes up very little room on your hard drive. Or, you could post fles to a server and create a "reference" file that is small enough to be sent as an email attachment that plays the uploaded data on someone else's computer as long as they are connected to the Internet. Unfortunately, for these reference files to work, all of the resources referenced within the file must continue to exist in their proper locations in order to be found and played by the reference. Since you did not indicate what "but they won't play" really means here or how you actually "moved" your iPhoto library files to the external drive, I can only make some "educated guesses" at this point. (BTW: for future reference, iPhoto has a built-in function that allows you to copy your library to one or more back-up locations and then connect to them by default when iPhoto opens or switch source libraries at will within the opened application.)
    If you created reference files and saved them to an external drive, you should be getting an error message telling you the app needs to know where the source files are located so the reference file can re-connect to the resource data. If the original files were also saved, then simple navigate to the source files in oder to tell the app where they are now located. If the source files were deleted as part of the reformatting process, then you are up the proverbial creek whithout a paddle with little or no hope of doing anything about this issue. (I.e., reformatting and then re-installing a system drive usually means you would have little hope of recovering the specific "lost" data you want as there is always a good chance that some of the data segments were overwritten during the process.)

Maybe you are looking for