WHy don't Final Cut Pro 7 recognize my sony hdr-sr11 camera.

Final cut won;t recognize the camera for log and capture. iMove doesn't recognize it either. Help

That's an AVCHD camera.
You connect it with a USB cable and use Final Cut Pro's *Log & Transfer* function to bring in the clips.
[AVCHD workflow in FCP.|http://documentation.apple.com/en/finalcutpro/professionalformatsandworkfl ows/#chapter=6%26section=0]

Similar Messages

Does Final Cut Pro X support Sony HDR-SR8E

How could i import the footage from Sony HDR-SR8E to edit on Final Cut Pro X?
Thanks,
Winston Er

http://help.apple.com/finalcutpro/cameras/en/index.html

Final Cut Pro X and Sony HDR V1U camcorder

Can I import HDV footage with this setup via firewire?

Thanks for the reply, I'm asking because I heard that FCPX cannot import tape-based footage. Is that correct, or not? Secondly, if it does work, once captured will those QT files also work with my FCP 7.0.3 software? Meaning can I just use FCPX to capture, and then later import those files into 7.0.3?
Thasnk again, I appreciate any info.
Message was edited by: Uncle Marsh

Why does my final cut pro is not responding every time I open it????!!!!!!

why does my final cut pro is not responding every time I open it?

As you give no background info nobody can possibly guess.
However, have you tried trashing the preferences?
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
There is absolutely no danger in trashing preferences and you can do it as often as you like.
The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones . . . instantly.

Why does our Final Cut Pro Batch Exports incorrectly name sequence files?

Why does our Final Cut Pro 7.0.1 Batch Exports incorrectly name sequence files?
For example I can Batch Export 10 sequences one of which is called:
"899-006TL013 It's Not Your Fault 800-509-2875"
Then the output for some of the files are along the lines of:
"899-006TL013 It's No#61386E.mov"
I have seen this happen with 1-6 files or not at all... is it just dumb luck?
What is going on here and is there any way to avoid or remedy this issue?
We first thought having the render destination window open caused it but that was not the source.
Any ideas?

I've run into the same problem with FCP 7.0.2 when exporting from the sequence using File --> Export --> QuickTime Movie. I exported a file today called "BSP - 01 - How You Can Be Sure You Are A Christian" and it came out as this "BSP - 01 - How You Can#1630". This is getting to be annoying. I also need to name these files the length they are. I'm hoping someone may see this and have a suggestion (besides shortening the file name). It seems like I've also seen this on shorter file names, but at the moment I can't prove it.

Why is updating final cut pro such a nightmare for all users?

How come I cant get back to final cut pro 6.0.3? Or 6.0.4? These were a stable version of FCP for MY SET UP..... I can not find how to get back to these versions. All that I see is pro updates, or updates using apples software update, that will just get me back to 6.0.6, a version of FCP that my plugins dont work under.
Is there a secret place where 6.0.3 lives that I dont know about? I have seen reports saying there is no more way to get back to 6.0.3 or certain levels of FCP.
This truly is a nightmare. This is coming from a 10 year user of logic, a program that was bought from a german company by apple, and intergrated into their own product line of apple products. With logic, I can go back to 7.2.3 if I wanted to, or logic 8.0.2, if thats the set up that works for me with my plugins. Is this even possible?

When item(s) are available in Software Update, go to the menu bar > Update.
Activate the option *Install and Keep Package*
The individual Installers will be saved at: Hard Drive/Library/Packages.
Now, stop cherry picking the advice you have been given over the past few days. Copy the contents of your User space to an external drive. Bite the bullet and reinstall Mac OS X. Run Software Update and accept everything. Repair Permissions and restart the computer when it is done.
Install Final Cut Studio. Run Software Update and accept everything. Repair Permissions again and restart the computer when it is done.
Install other software from their original discs or download them again.
Copy the contents of the folders from the old User space back to the folders with the same name in your new User space. *Do not copy the contents of the Library folder*.
When you have done that, post back and I will help you retrieve your email and third party fonts.

Why won't Final Cut Pro X export in 1080P

I'm trying to export video in 1080P in Final Cut Pro X 10.1.4. Every time I click the share button it says I'm exporting in 720P. I tried to change it to 1080P and its greyed out. I even tried click share to Apple device in 1080P still 720. I verified all the clips are 1080P. I've never had this problem before its always just done it. Heres a screenshot of the share screen.

D-OH! Headslapper!
I have those. Every day. Thanks for posting your solution instead of just letting it go. Hardly anyone closes their threads around here and it really helps those who come after, those looking for similar issues.

Why won't final cut pro x import my media anymore?

I recently encountered a bug with final cut pro x. Previously I have been importing AVCHD files and working with them directly in the application. But, today as I went to import some more of the same footage it acknowledges an import, but nothing shows up in my events folders.
This is really bizarre. Not only this, but I tried importing a regular .MOV file directly by drag and drop, and via the import button, to no avail.

I never knew that "/" were part of the Unix code. Thanks for that. As for importing AVCHD video through the application by Cmd-I, I have done that as well. It still doesn't work.
Here is what I've done:
And nothing shows up in the event folder.

Why doesn't Final Cut Pro X update songs from Garageband?

While working on a short film in Final Cut Pro X, I worked up a simple sound track in Garageband. I imported the Garageband project, aligned it, and discovered that I'd mistimed one of the sound transitions.
So, I went back to Garageband and updated the transition, moving the sound effect to the right spot to match up to the video, and then went back to FCPX. I dragged the Garageband project onto the original copy that I'd imported, and selected "replace" and ended up with... the original. After some experimenting, I actually went and deleted an entire track from the Garageband project and reloaded it in FCPX... still no change. How can I fix this?

Here's an update...
I made some changes to the Garageband track and saved it as another project... Final Cut refused to even detect it until I restarted Final Cut.
I have a sound effect that's placed at 1:32 in Garageband, and it ALWAYS plays at 1:31 in Final Cut, no matter how shift it around in Garageband. After changing the song in Garageband and sharing it to disk, I verified that the sound effect is happening at 1:32 by playing it back in Quicktime, so it must be Final Cut that's misbehaving.

Why is my final cut pro so slow?

I just started using final cut pro on my iMac and I've noticed the performance is horrible. I have an event with about 20-30 clips in them, each 10-20 seconds long. The videos are shot using a DSLR using 60p with the AVCHD format. Even when I tried to scroll the event browser, the lag is 2-3 seconds long. The panel doesn't even scroll smoothly.
Here are my specs of the iMac.
Hardware Overview:
Model Name:          iMac
Model Identifier:          iMac13,2
Processor Name:          Intel Core i5
Processor Speed:          2.9 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          24 GB
Boot ROM Version:          IM131.010A.B05
SMC Version (system):          2.11f14
Do I need a better machine to operate final cut pro?

It is stored in my external drive, a thunderbolt raid drive. LaCie 5big.
http://www.lacie.com/products/product.htm?id=10607

Why is my Final Cut Pro Dropping Frames?

Final Cut Pro 3 has been capturing media for years. Now every 20 seconds it says " Dropped frames." Is this because I updated to Mac OS 10. 4.9? Help. I'm frustrated.

This is a known issue. Updating to 10.4.9 causes FCP 4.5 and earlier to drop frames when capturing. The solution? You'll need to archive and install the OS all over again, and get back to 10.4.8.
Search the forums for 10.4.9 and FCP and you will fine MANY threads talking about this.
Search is your friend:
http://discussions.apple.com/thread.jspa?messageID=4378582&#4378582
Shane

Why won't Final Cut Pro 7 allow me to Shift, Command or Option-select items?

I am having a major problem with Final Cut Pro 7. I commonly select multiple items using the Shift (⇧), Command (⌘), or Option (⌥) keys. However, just recently it started not allowing me to select multiple items this way. What happens is either the timeline, the slug, or the canvas will play (depending on which one is selected) I didn't change anything on the computer; it just started happening. I even tried reinstalling the whole entire Final Cut Studio. However, the problem still remains. This is a real problem and really is causing major issues for me. How do I fix this!?!? I'm at a loss. I've tried everything that I could think of short of reinstalling the entire OS (which I may end up doing). Can someone help me?

>I believe that the uninstaller that Digital Rebellion provides (and I used) does, in fact, delete the preferences...
Of course. DR's FCS Remover does exactly what it says on the tin. Except it does not come in a tin.
What it does is remove every vestige of any version of Final Cut Studio.
I ran it on my computer and filled the space that FCS took up by running a script which installed an animated .gif of a dancing banana several times over. Let's be honest. Video editing is a stupid hobby anyway.
Here is the banana...

Trying to download video into Final cut pro from my canon XHA1 HD camera

I have a brand new I-mac 24 inch 4gs of memory and a terabite of hard drive, with Final Cut Pro 6.0.1 Studio 2. I have a brand new Canon XHA1 HD camera. when I plug in my 4pin firewire the computer it won't except the camera or the firewire, but I-movie will? the warning sign says it can't find the firewire? does any body know what settings I need to set, so my computer will except and download my video footage in final cut pro?

I've got the Canon XH-A1, but I'm still using FCP 5.1.4, for the moment. I've had no problem capturing from the camera. Are you using Log and Capture? The simplest way to try capturing, once you're in Log and Capture is to hit play in the controller section (or space bar), and then use the capture now button, once the video has started playing. There is an entire chapter in the book on how to use the log and capture facility, so I'm not going to get too detailed here. If you can't get it to work, please be specific about how far you get. Can you play the video on the camera?, Does it show the transport controls?, etc.

Final Cut Pro X and Sony Handycam HDR-CX105

I'm thinking of buying Final Cut Pro X, but the list of compatible cameras here:
Cameras supported by Final Cut Pro X - Apple Support
doesn't contain the HDR-CX105 - although it seems to contain literally dozens of other Sony AVCHD cameras.
Does anyone know if this is simply an omission, or does its absence from the list mean that it won't be possible to import directly? I'd rather avoid having to convert files first, especially since Final Cut Pro will now accept AVCHD files.
Thanks for any advice on this.
Lyndon

Hi Tom - there has been a development, of sorts.
I had been recording onto the 32Gb Pro Duo memory stick, and FCP X didn't seem to recognise it. The 'NO NAME' disk that appeared on my desktop would appear to be the camera's internal memory, and that didn't contain any data.
I switched to Internal Memory, recorded a clip and connected the camera again. This time, NO NAME appeared under Cameras, and the MTS clip appeared in the Input window. The trouble is that my internal memory is only 8Gb, which only gives me an hour's recording time. Am I likely to be stuck with this limitation? I have just ordered a USB card reader from Amazon which apparently reads Pro Duo sticks in the hope that that might work...
Many thanks for your prompt help!

PDW-HD1500 - Final Cut Pro export to Sony XDCAM error

I have a sequence in Final Cut Pro with XDCAM HD422 1080i50. When I try to export going via the "File > Export > Sony XDCAM" menu, choose "XDCAM HD422 1080i50 CBR" and hit the "Export" button.
On a 5 minute clip, I get this error message after 8% of exporting. In the system.log in Mac OS X there is a "write error 138" reported by the XDCAM exporter.
If I set an out point to reduce the in-point to just 5 secons, the export is successful. If I try 1 minute, the export fails. If I check "recompress all frames" and export the 1 minute clip, the export is successful.
Waiting for Final Cut Pro to recompress all frames takes too long on a new MacBook Pro 17-inch. 1 minute takes about 4 minutes to recompress.
I am running Mac OS X 10.5.8, Final Cut Pro 6.0.4, QuickTime 7.6.4, XDCAM Transfer 2.11, and firmware version 1.51 on the PDW-HD1500.
I have set the audio outputs of my sequence to 8 tracks dual mono discrete, and set each audio track to go 1-1, 2-2, 3-3, 4-4 and so on. The video settings are XDCAM HD422 1080i50 50Mb.
I have checked that the settings on the PDW-HD1500 is set to HD422, 50i, 8ch 24-bit. Are there any other settings I might have overlooked?
Any suggestions? I would really appreciate some help.

I've had experience wiith using 7toX and never had that message. Have you tried contacting the developer? My guess is they would be responsive.
Russ

WHy don't Final Cut Pro 7 recognize my sony hdr-sr11 camera.

Similar Messages

Maybe you are looking for