Why don't my 2007.1 XML service export files work in 2007.1.1?

Why don't my 2007.1 XML service export files work in 2007.1.1?
Due to changes to the XML export file format in version 2007.1.1, XML service export files from version 2007.1 are not usable in version 2007.1.1.

Hi Alexander,
Just a nit-pick, I'm sure you already know this, but the phone looks for "/spa303.cfg" not "spa303.cfg"
Let's simplify your issue, forget that you have CUCM running.
CUCM is not an issue unless you have CDP running on the swich connected to the SPA303 and the SPA303 is requesting files on the wrong VLAN.
CUCM is not an issue unless the responding DHCP server is pointing the SPA303 to the wrong TFTP server.
Try this:
a. Factory reset your phone [else it will not look for /spa$PSN.cfg]
b. What DHCP server responds to your SPA303 when it boots up? Is it the DHCP server you're expecting, or didn't a rogue DHCP server "jump" in and make an OFFER pointing the SPA phone to the wrong place?
c. Look at the DHCP OFFER OPTIONS from the server, is OPTION 66 *exactly* what you're expecting?
d. Now look at the ARP request that the SPA303 performs, is it ARPing the correct provisioning server?
Here's what you should see assuming your phone gets no response from a TFTP server:
1. The SPA303 will now look 4 times for the following files at 3-second intervals:
SEP1CDF0F2F14F2.cnf.xml
/spa303.cfg
2. The SPA303 will now look 8 times for the following files at 3-second intervals:
XMLDefault303.cnf.xml [repeat 8 times]
/spa303.cfg
3. The SPA303 will now look 20 times for the following file at 3-second intervals:
/spa303.cfg
4. The SPA303 will now look 33 times for the following file at 3-second intervals:
/Cisco/SPA303/1cdf0f2f14f2.cfg [33 retries for this file]
5. The SPA303 will now look 33 times for the following file at 3-second intervals:
/spa303.cfg
Up to now, about 6 minutes have elapsed since the phone was connected to the network and powered up.
6. Wait for about 54 minutes
7. Repeat steps 4 and 5 until a file is found [click Wireshark image for high-resolution version]
Regards,
Patrick----
Use this reference document to locate SPA phone resources

Similar Messages

Why don't I have the DCP export option in Adobe Premiere Pro?

Why don't I have the DCP export option in Adobe Premiere Pro?
Premiere Pro CC v7.2.2

I will reply to my own question!
I was on my Windows machine when I began producing my video. During Export, I wasn't able to package it. After a few hours of research I found that Wraptor DCP is not supported (yet) on Windows platforms. I switched over to my Macbook Pro and viola!
DCP'ing all day long now!

Why don't I have LTE service? I have been asking for several years why there's no coverage at my home.

Hi Verizon Wireless Team,
I have asked why there is no LTE coverage at my home for several years now and Verizon has failed to get back to me every time.
So forgive me, I'll ask again now since it is the end of the year.
The LTE icon never appears when I'm at home. Same for my MiFi gadget.
Your online coverage map shows that there should be coverage for me.
Any ideas?
Regards
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Message was edited by: Verizon Moderator

hcypress,
Help has arrived! What zip code are you experiencing these issues in? Does the service improve once you leave the home area? Does this affect voice, data and text? What model phone do you have?
EfrainM_VZW
Follow us on Twitter @VZWSupport

Why don't I have internet service for laptop and desktop at the same time

Time capsule will either provide Internet service to my iMac (hardwired) or my laptop (wireless), but not simultaneously.

Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Internet icon
Click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Share a public IP address
Click Update to save settings
Wait a full minute for the Time Capsule to restart, then check the network again.

Why don't my Apple USB keyboard and mouse work in Win XP after bootcamp driver installed

Hey there,
I just installed Win XP Pro + SP2 using Bootcamp 3.0 on my Mac Pro 1.1 (2006) which is running Snow Leopard (10.6.8). The Win XP installation went flawlessly and everything seemed to be working OK (mouse & keyboard were fine) until I installed the Bootcamp drivers from my OS X installation DVD. The installation didn't report any problems, but when it was finished, the keyboard (Apple USB keyboard) and mouse (Logitech USB mouse) stopped responding. No power to the mouse at all makes me believe that it is actually the USB drivers themselves that have failed. Rebooting WinXP didn't solve the problem - it boots WinXP just fine (and fast!), shows the Bootcamp Help screen, but no mouse or keyboard, a.k.a., USB, response.
Can I recover from this somehow?
Help please?
Thanks,
Ron

Problem solved.
It seems that the boot camp 3.0 drivers installed from my 10.6.8 DVD weren't sufficient. I repeated the install from scratch, but rather than rebooting as soon as the BC 3.0 drivers were installed, I allowed the Apple Update utility to D/L and install the BC 3.1 and 3.2 updates. Viola! Everything works brilliantly. My Mac Pro is now the best Windows PC I have ever owned

Why don't Photoshop and Illustrator open my files?

Photoshop and Illustrator CS6 are not opening two .psd and .ai files I made three weeks ago with the same CS6 programs on the same Macbook. I tried to open them either directly doble-clicking on the files than opening them from the programs, but it always come a sort of "the program can not open this file".
What can I do to solve this problem?
Thank you!

AriannaJuri, Are you sure the files that you are opening are not corrupted?
Were they saved properly at the time when you worked on them Last!
Edit: Can you try opening them on a diff system.
- Nitin
Message was edited by: Nitin Gupta aka LP

Why is H.264 not on the "export" file format list?

In QuickTime Help it says, "Video Format: Choose the video compressor (codec) you want to use to compress your video. For the highest quality at the lowest data rate (or the smallest file), H.264 is recommended." However, H.264 is not in the pop-up menu of formats, although the help file appears to say that it is. So how does one compress a .mov file to H/264 format?

Here:
http://babelfish.altavista.com/babelfish/trurlpagecontent?lp=fren&trurl=http%3a%2f%2fwww.qtbridge.com%2fQTCodecs.html
It's being translated from French so it may take a few secs to load.

Why don't the speakers for my iPod 5 work?

Since before the last update, my speakers stopped working. I can only listen to music when I have the headphones plugged in. When they are not plugged in it doesn't say they are, there's just no sound. Help me please!!!

Hey Kennnia, Most often it is a stuck switch inside the headphone port. Try this, quickly plug / unplug the headphone jack about 12 times to free the switch. If that does not work, try resetting, Press and hold the power and home buttons together until the Apple logo appears, about 10 seconds+/-, then release both buttons. If still no joy, Go into Settings>General>Reset and tap Reset All Settings. If still no joy, connect with your computer, make backups, then Restore from Backup, with iTunes. If still no joy, last resort, Restore to New with iTunes. If after a full restore it still does not work, you may have a hardware issue, contact Apple at your store or through the Genius Bar, set up an appointment and have your iPod evaluated. Good luck. Cheers.

Exporting files, keep date

I have shot a lot of raw files and imported them in LR 5.5
When I have edited and selected the pictures, I export them to jpg files for use on the internet.
I included all metadata info and remove location info is selected.
After the export, the files have a creating date of today and not the original date from the RAW file.
Is there a way to set the original date directly from the Lightroom export?

I don't believe so as the exported files are new iterations from the original raw data. They were created today when exported hence that date. Doesn’t mean you couldn't figure a way to somehow get the raw data created into some other metadata field but in terms of what the Finder reports, it has to report when that file was created.

Export file: EXPDAT.DMP

Hi all, need urgent assistance
am doing a full export..started since friday ...normally this should take 2 days. that is for whatever reason on monday morning it should have been done. The last line is
Export file: EXPDAT.DMP >
and from my last experience it can be like this for days without any progress(6 days or more)...and if enter key is pressed. it will give export terminated unsuccessful message
does it mean the export is completed?
all my folder destinations are already populated with copies of the exported files.
i await your responses
thanks

Please see below....that was the full export command that was used
USERID=user/password@H_172.7.303.72
LOG=E:\history\02Nov2007history.log
FULL=Y
DIRECT=Y
FILE=(
E:\HISTORY\hist_01.dmp,
D:\DUMPS\history\hist_02.dmp,
D:\DUMPS\history\hist_03.dmp,
D:\DUMPS\history\hist_04.dmp
E:\HISTORY\hist_05.dmp,
E:\HISTORY\hist_06.dmp,
E:\HISTORY\hist_07.dmp,
E:\HISTORY\hist_08.dmp,
E:\HISTORY\hist_09.dmp,
E:\HISTORY\hist_10.dmp,
E:\HISTORY\hist_11.dmp,
E:\HISTORY\hist_12.dmp,
E:\HISTORY\hist_13.dmp,
E:\HISTORY\hist_14.dmp,
C:\HISTORY\hist_15.dmp)
FILESIZE=30000M
your kind response please

Why not passing only one XML String parameter to Axis Web Service interface

Hi,
I am a newbie of axis and this is the first post in SUN site.
I am writing a web service. I am considering this question after trying some examples in Axis:
Why not defined parameters of our service interface (Service method.) as a XML String? -We can provide a XML Schema to Client, client fill all required information to a XML according to XML Schema. Seem that it is more straightforward than passing some complex objects.
Your answer will be high appreciated!
Thanks,
-Hut

Did you find a solution for that? Even im trying the same...

Why don't oam files placed in indd cc show up in ibooks after being exported as an epub?

Why don't oam files placed in indd cc show up in ibooks after being exported as an epub? I work on a PC not a mac and have done everything described in tutorials. OAM animations are not working. please help.
Thank you.
Kathy

This discussion explains the whole issue. Nothing has changed since it was written:
How to add Edge Animate Web Publish to FL EPUB 3 for iBooks.

Why don't the star ratings export into Photo Mechanic or Bridge?

When I export a version out of Aperture with metadata the star rating does not export. Why?
I notice that keywords do export but not the stars. Is there a way for Aperture to export these ratings so that PhotoMechanic will read them on the jpg output?

It's the same thing when you import images to Aperture with sidecar files created in Bridge: Everything comes but the ratings.
DLS

Why won't copy/paste images appear in PDF (from Word 2007)?

I find all places in a Word 2007 document where content copied from Power Point 2007 and then pasted into a Word 2007 document does not appear in the subsequent PDF file I generate. White space of the same size as the pasted content appears in its place. Why is this happening and are there any suggestions to work around this issue? What is curious is the free PDF creation tool that you can use to generate a PDF within Word 2007 (by choosing file save-as PDF) does NOT have this same issue. I don't want to use Word's tool since it doesn't allow for the option settings flexibility I need to produce the final PDF.
I already tried saving the Word file as XML and then re-saving as Word .docx and regenerating the PDF from Acrobat: the graphics are still missing. I also tried in Acrobat Help> Repair Installation and then shut down/restarted my computer. Again, the regenerated PDF is missing the graphics.
Personally, I do not use a copy/paste method; rather, I use insert>picture>from file or paste special as a grphic file type. I know the same graphics placed this way come out fine in a PDF I generate from Acrobat. However, I support a bunch of engineers who make copy/paste a shortcut habit. I will have no luck telling them not to do this.
I appreciate any help with this.

Preferences in Acrobat reader under Page Display are already set to Show Large Images. I assume that is the setting you mentioned.
I don't know of any setting in Word 2007 that would make a difference. Does anyone else have work around suggestions?

XML Import/Export on 64-bit UNIX

Hi,
can anyone help me about Analytic Integration Services XML import/export on 64 bit Unix?
The document "eis_93100_readme.pdf" explain that the import/export function is not available on 64-bit UNIX platforms and I don't know how to perform it.
Does any tools exists?
Thanks for any response in advance.

This is usually an indication that something is wrong with the credential store. I've run into a bug with cryptotools where it truncates passwords on Unix. Try running cryptotools without encrypting the password. After that, see if the password is correct in the credential store.
If this seems to be the problem, then I recommend generating your credential store on Windows and then moving it to your Unix platform.
Bryan

Why don't my 2007.1 XML service export files work in 2007.1.1?

Similar Messages

Maybe you are looking for