Why don't my actions run?
I installed an action and when I click for it to run it does nothing. the defaul actions don't work either.
So many things have to be in place for an action to run properly - depending on the action you may have to have a document open, and image layer active, something selected or no selection made, etc. etc. that I'd have to ask whether you could be more specific. Not only that, but some actions aren't prepared to anticipate certain settings that may be different in your environment than when the action was recorded. It's not trivial to write a truly general purposse action.
Ideally, could you please describe what the action is supposed to do, and post a screen grab showing your whole Photoshop environment just at the moment you're about to run it? Perhaps someone here can spot something or make suggestions what to try...
-Noel
Similar Messages
-
Why don't 64bit versions run on my 64-bit computer?
I have a Creative Cloud subscription. 64bit versions will not run on my 64bit machine although the 32bit versions will work. I have Windows 7 Home Premium running on Intel i7 CPU 920 @ 2.67 GHz, 12 GB RAM, Nvidia Geforce GT 220 graphics card. Why don't the 64bit versions run?
The programs start to launch and then fail. They get as far as the welcome image and sometimes also the message from Adobe to participate in the product improvement program. But they never actually launch successfully. The error message is from Windows and states: "A problems caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". When I click okay, the error message goes away and I have never received a solution of any kind.
Please help if you have any idea what it may be.
Thank you,
graphics jody
Original message
From: "Nitin Gupta aka LP"
To: [email protected]
Received: 4/30/2013 9:18:54 AM
Subject: Why don't 64bit versions run on my 64-bitcomputer?
Re: Why don't 64bit versions run on my 64-bit computer?
created by Nitin Gupta aka LP in Adobe Creative Cloud - View the full discussion
graphics jody, What problems do you face?
Does the program launch?
Does it give any error message?
Did it install fine?
- Nitin
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5279782#5279782
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5279782#5279782
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5279782#5279782. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Why don't java applets run when using Firefox 4.0 in a windows limited user account?
Java applications will not run in Firefox 4.0 when the windows user/process only has limited user access rights. The systems, I see this behaviour on have Windows XP Pro SP3, Firefox 4.0 and JRE 1.6.0_24 installed. The java application will run when when full administrative rights are present. This issue did not occur with the 3.6 firefox version that was previously installed.
The problem also exists with the newer Firefox 4.0.1 and Java 1.6.0_25 versions.
Enabling administrative rights resolves the issue ... though this defeats the purpose of using a limited user.
The underlying bug appears to be in the Firefox java plugin detection code. The issue is related to the detection code requiring write access to the HKLM\SOFTWARE\mozilla.org windows registry key. The limited user only has read access for this registry key. The behaviour was identified using the Sysinternals ProcessMonitor utility ... showed firefox calling an interface to create the registry key and getting an access denied response in the limited user case.
A more targeted workaround for the issue is to grant the limited user write access on the HKLM\SOFTWARE\mozilla.org windows registry key. This avoids the need to grant administrative rights to the user and enables the java plugin to be detected. That is, it works on the 2 XP systems where the java plugin wasn't being detected in limited user accounts. -
Why don't you run a eduction program to train some members of the staff to be leaders in korea?
I'm disappointed you.
Mac Addresses of Erhernet and Wi-Fi on My iMac was exposed to network because of using terminal supported by apple iMac.
I just wanted that Using changed random mac address protect me from stealth connection and attack by someone, not spoofing other one.
After using terminal, my iMac is not under my control.
Network key to prevent further changes on system preferences pannel was opened very often. Network configuration was finally changed.
You would rather educate how to change mac address of Erhernet and Wi-Fi to me than hack my iMac.
I want to control my Mac by myself, because it's mine not yours.
You don't have any rights to control my iMac even thought your purpose is positive.
Why don't you run a eduction program to train some members of the staff to be leaders in korea?
Micosoft has run a various education programs to make new user and to upgrade user's system in korea.
I'm much interested in the distribution of your products, iphone, ipad & iMac as your agent in Ulsan, Korea .
I have a plan to apply your products to HYUNDAI expect project.
Who should i contact to talk about distribution in Ulsan, Korea in detail?
Please let me know Charger Name, email address and phone number.MAC addresses for network hardware are encoded into the network interfaces. To change them requires spoofing of the address, something not officially supported by Apple (or any manufacturer I know of) and hence would be beyond the sort of support any Apple Store employee could or would provide, or is it something that Apple would providing training to the dealers in how to accomplish.
As to distribution of Apple products, Apple has information on their channel programs on this web page:
http://channelprograms.apple.com/channel/index.html
Unfortunately, they say at this time they're not accepting any applications for resellers:
http://channelprograms.apple.com/channel/channel_update.html
You can keep checking that page from time to time and see if they once again open up application for resale. When or if that will happen, none of us here can say.
Regards. -
Question.Why don't the apple company ever make a memory card that people could use for their apple product just in case customers run out of memory on their apple product?
One thing the iPad lacks is a file manager. There is no file explorer native on the iPad. If you started adding plugin cards, then you add the need for that. And, in PC's, most viruses spread via the file explorer (the definition of a virus is a malicious program that propagates itself across multiple programs)
There are a few drives out there for iDevices. Such as the WiDrive and others. -
Why is my macbook pro running slow after os x yosemite upgrade
Why is my macbook pro running so slow after os x yosemite upgrade
Please describe the problem in as much relevant detail as possible. The better your description, the better the chance of a solution.
For example, if the computer is slow, which specific actions are slow? Is it slow all the time, or only sometimes? What other changes did you make, if any, just before it became slow? Have you seen any alerts or error messages? Have you done anything to try to fix it? Most importantly, do you have a current backup of all data? If the answer to the last question is "no," back up now. Ask if you need guidance. Do nothing else until you have a backup. -
Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time. You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up. Like it is frozen. I have tried rebooting the computer and it works for a few minutes then gets stuck.
Which model iMac do you have?
How large is your HD and how much space do you have left?
Check out the following & do the necessary:
User Tip: Why is my computer slow?
What to do when your computer is too slow
Speeding up your Mac
OS X (10.6.6)
Use Software Update or the OS 10.6.8 combo update to update your OS. Also, update everything SU has to offer for your computer. When done, repair permissions and restart your computer. -
HT1338 why my macbook pro is running slow now ?
why my macbook pro is running slow ?
Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Sluggish Finder - Bunch of icons on your desktop? An overcrowded desktop slows down your Mac. Get rid of needless Finder calculations - Open a window in Finder/View/Show View Options: ensure "Calculate All Sizes" option is unchecked.
Internet related - It's likely that your broadband connection is the bottleneck. You can check your speed on http://www.speedtest.net to see how fast your connection is. If your web browser specifically performs slowly, quit and relaunch it. If browser remains sluggish, empty its cache. Safari/Empty Cache Firefox/Preferences - select the Network tab of the Advanced preferences and click the "Clear Now" button in the "Offline Storage" area.
Application related - Launch "Activity Monitor" - Applications/Utilities - click the CPU heading and see what float to the top. If an application takes up a large chunk of CPU and won't let it go, it could be dragging down your Mac's performance. Quit it by clicking the Quit Process button at the top of the Activity Monitor window.
Too little ram - max out your ram. -
Why don't I have Boot Camp Control Panel?
I am currently asking this in Yahoo! Answers as well:
I just used Boot Camp Assistant around a week ago to install Windows 7 Ultimate on my Macbook Pro with Retina Display (and if it also helps find a solution: I'm also using Mountain Lion). At first, certain keyboard functions that can be used in the Mac OS (such as brightness and volume adjustment; oh, + the trackpad functions) that couldn't be used in Windows didn't exactly bother me since I was able to manage without them... until I started to play online games - which is the main reason I had to dual boot my macbook. When I already found it annoying to continuously click control+left click to perform right click, I started to look for solutions, and I noticed that most people online have said, "Oh, simply adjust your settings in the BOOT CAMP CONTROL PANEL. There should be this DIAMOND in your task bar; click on it so that you can apply changes you want. It should be there after you have installed Windows..." ... Well, thing is: in my case, it DOESN'T APPEAR! "Check your control panel," they say. "You will surely find it there." Check for me, if you will, because I seriously have no clue why I can't find it, even after checking using the Search bar...
Now... why don't I have Boot Camp Control Panel? I find it really strange how it doesn't appear in mine when it does in most of other people's... I kinda dislike the idea of reinstalling Windows, because over the week, I've downloaded several drivers and other applications (mostly games). Is there any way I could get it without having to undergo the process of deleting and uninstalling files? I need my Mac OS for school and office work (don't ask) and I need to have my entertaining pastimes using Windows. Please don't hesitate to suggest as many ideas as you can...
Thank you!It appears from your description that you did not download and install the Windows support software. It was one of the first menu items you saw when you started Boot Camp Assistant.
Run Boot Camp Assistant again and select the menu option to download the Windows support software. Save this download as described then install it from within Windows. -
Why Mac crashes when I run the clean speech ring of osx and then run the RestoreTime Machine?
Why Mac crashes when I run the clean speech ring of osx and then run the RestoreTime Machine? Could it be that I run restore the setup from a usb drive. I've done thisbefore and when it has not been a problem.
Does anyone have a good answer on this so I'm happy.kjell-einar wrote:
Why Mac crashes when I run the clean speech ring of osx
What is that?
run the RestoreTime Machine?
What are you restoring?
Do you mean a full system restore? Or something else?
When does your Mac crash -- during the restore, when you try to start up afterwards, or ? -
Hi,
We have cluster with two hosts (Host01 , host02) replicated to another server (Replica01)
in order to test automatic failover to the replica server (Replica01) We unplugged the power cables from Host01 and Host 02
now the VMs on the replica server is still off , why don't the VMs start up automatically on the replica server?
Ramy Shakeroverall there is no automatic failover in Hyper-V
Of course there is. It's enabled by Failover Clustering. This is a totally separate technology from Hyper-V Replica.
There is no automatic start up in Hyper-V Replica because it is not designed to detect a split-brain condition where the same virtual machine is running in multiple locations simultaneously. The replica site has no way to know why it can't reach the primary
system anymore. It might just be because someone unplugged a network cable. If the primary's virtual machines are still running and the replica decides to spin up its copies, you will have many troubles.
Eric Siron Altaro Hyper-V Blog
I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.
"Every relationship you have is in worse shape than you think." -
Pop up enrollment form after teh action run
Hi experts,
I have a situation where I want the Enrollment thing (HRBEN0001) to come up after I run an action. The action runs fine i.e. it goes through all the infotypes but it doesn't come up with enrollment part like the one it comes up with new hire action. HOw do I bring that up.
The infotypes sequence I have is: 0001. 0008 0171 0378
I want HRBEN001 to come up right after 0378. Please guide me how it can be done.
Thanks,
RashmiHi Rashmi,
I am having a similar situation to pop-up BN enrollment form after filling infotype 0378. Can you help me on how to achieve the same.
Thanks in advance
Lakshmi -
Why don't my 2007.1 XML service export files work in 2007.1.1?
Why don't my 2007.1 XML service export files work in 2007.1.1?
Due to changes to the XML export file format in version 2007.1.1, XML service export files from version 2007.1 are not usable in version 2007.1.1.Hi Alexander,
Just a nit-pick, I'm sure you already know this, but the phone looks for "/spa303.cfg" not "spa303.cfg"
Let's simplify your issue, forget that you have CUCM running.
CUCM is not an issue unless you have CDP running on the swich connected to the SPA303 and the SPA303 is requesting files on the wrong VLAN.
CUCM is not an issue unless the responding DHCP server is pointing the SPA303 to the wrong TFTP server.
Try this:
a. Factory reset your phone [else it will not look for /spa$PSN.cfg]
b. What DHCP server responds to your SPA303 when it boots up? Is it the DHCP server you're expecting, or didn't a rogue DHCP server "jump" in and make an OFFER pointing the SPA phone to the wrong place?
c. Look at the DHCP OFFER OPTIONS from the server, is OPTION 66 *exactly* what you're expecting?
d. Now look at the ARP request that the SPA303 performs, is it ARPing the correct provisioning server?
Here's what you should see assuming your phone gets no response from a TFTP server:
1. The SPA303 will now look 4 times for the following files at 3-second intervals:
SEP1CDF0F2F14F2.cnf.xml
/spa303.cfg
2. The SPA303 will now look 8 times for the following files at 3-second intervals:
XMLDefault303.cnf.xml [repeat 8 times]
/spa303.cfg
3. The SPA303 will now look 20 times for the following file at 3-second intervals:
/spa303.cfg
4. The SPA303 will now look 33 times for the following file at 3-second intervals:
/Cisco/SPA303/1cdf0f2f14f2.cfg [33 retries for this file]
5. The SPA303 will now look 33 times for the following file at 3-second intervals:
/spa303.cfg
Up to now, about 6 minutes have elapsed since the phone was connected to the network and powered up.
6. Wait for about 54 minutes
7. Repeat steps 4 and 5 until a file is found [click Wireshark image for high-resolution version]
Regards,
Patrick----
Use this reference document to locate SPA phone resources -
I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running mountain Lion 10.8.2
Because line-in has been removed.
It does allow for an Apple headset with mic., but I don't know if it would work with third-party ones.
You'll need to use a Griffin iMic or similar to use line-in via a USB port.
The same goes for the 15" retina, the newest MBA and the new iMac (whenever it finally arrives). -
Why don't we keep Oracle Database ARCH logs in RAW devices
Hi All,
Why don't we keep Oracle Database ARCH logs in RAW devices?
How ARCH process is related to Block Device and Character Device ?
Thanks,
Tusar
Edited by: user11987718 on 26-Jun-2012 09:59Why don't we keep Oracle Database ARCH logs in RAW devices? 1.This is because raw devices do not enable sequential writing of consecutive archive log files.
http://docs.oracle.com/cd/E11882_01/rac.112/e16795/rman.htm#RACAD320
2.with raw you have to specify the exact size of the file at creation time, in contrast with file system, where you can create file without specifying its size, start writing to it, apending new blocks to it until you are done, and thus creating a file of whatever size it needs to be to hold all information.
http://www.dbasupport.com/forums/archive/index.php/t-16429.html
3.raw file systems are difficult to manage because you cannot run normal os commands on them.(as there is no file systems)
How ARCH process is related to Block Device and Character Device ?A block device would read/write bytes in fixed size blocks, as in disk sectors. Character devices read/write 0 or more bytes, in a stream, such as a TTY or a keyboard.
For more details about what is block and character device type :
http://en.wikipedia.org/wiki/Device_file
And now think, how arch process is related to block and character devices.
Regards
Girish Sharma
Maybe you are looking for
-
Help with an error message: This edit cannot be done...
"This edit cannot be done because a transition would be cut or an item to one side of a transition would become too short." Can someone please help me understand this one? I have a project with self made lower thirds from a .tif graphic on V2 and a t
-
(how to submit a form to a case) Plus another email of customer...
Here is my problem. Web App search supplies a list of customer submitted items- DONE When in the detail of an item there is a form that is used to contact the Customer - DONE I want an email with the form data sent to the customer, AND the form to be
-
I have a HDMI to thunder port cable and I have mu Macbook pro hooked up to it and trying to mirror to my tv but I cannot choose a different display then my built in, and the F7 is not working to switch it like it says to do in instructions, What do
-
How can I import photos from iPhoto into a power point presentation
I would like to take a group of photos from iphoto and import them into a power point(for mac) presentation- the PP for windows allows you to take a large number of pics and make a "photo album presentation" but can figure how to do it in Mac.
-
Hi All, I have a smartform where i am using my own Style (zstyle). I have a standard text which i need to print in bold. So i have a charter format in zstyle for this (BT), which i used in text "<BT> text <slash>". Now this is printing in bold in Eng