Why don't my iMessages get marked as read on other devices?

It used to be the case that when I got an iMessage, if I read the message on one device (like my phone), it would be marked as read on my iPad, and the banner and notification would disappear (usually instantly).  One day, that feature just stopped working, and a message I read on my iPhone will stay 'unread' on my iPad (and my Mac), unless I go into the messages app on one of those devices.  I'm not sure if this is just a problem I'm experiencing, of if this is something that Apple changed..

Well, this has started happening to me very recently too. Could be a coincidence, but its at least interesting to know its not isolated.
Its a difficult one, as I dont seem to be able to recreate it when I test it (if I send a message to myself from my wifes iPad just after the problem has shown itself, it doesnt happen again). Its almost like iMessage has fallen asleep / disconnected somehow from syncing but reconnects for a while.
Im going to try the following:
1) forcebly closing iMessages on all iMessage devices (from the app switcher on iOS)
2) Turning off iMessage altogether on each device, then enabling it again (Settings > Messages > iMessage)
Interestingly after disabling iMessage on all my devices, when I try to send myself a message, it doesn't fail (at least not very quickly, I waited 15 minutes), it just doesnt show delivered or read.
After enabling iMessage again, the message I sent while it was off, still hasn't been received or failed (its been 5 mins). I'll see how it goes when I get a few more cross device messages.

Similar Messages

  • Why don't we keep Oracle Database ARCH logs in RAW devices

    Hi All,
    Why don't we keep Oracle Database ARCH logs in RAW devices?
    How ARCH process is related to Block Device and Character Device ?
    Thanks,
    Tusar
    Edited by: user11987718 on 26-Jun-2012 09:59

    Why don't we keep Oracle Database ARCH logs in RAW devices? 1.This is because raw devices do not enable sequential writing of consecutive archive log files.
    http://docs.oracle.com/cd/E11882_01/rac.112/e16795/rman.htm#RACAD320
    2.with raw you have to specify the exact size of the file at creation time, in contrast with file system, where you can create file without specifying its size, start writing to it, apending new blocks to it until you are done, and thus creating a file of whatever size it needs to be to hold all information.
    http://www.dbasupport.com/forums/archive/index.php/t-16429.html
    3.raw file systems are difficult to manage because you cannot run normal os commands on them.(as there is no file systems)
    How ARCH process is related to Block Device and Character Device ?A block device would read/write bytes in fixed size blocks, as in disk sectors. Character devices read/write 0 or more bytes, in a stream, such as a TTY or a keyboard.
    For more details about what is block and character device type :
    http://en.wikipedia.org/wiki/Device_file
    And now think, how arch process is related to block and character devices.
    Regards
    Girish Sharma

  • Mail with Gmail IMAP: All mail getting marked as read

    So other than being painfully slow, and just plain irritating, I have one huge problem with Mail (Tiger) and Gmail IMAP. All incoming mail is marked as read. The mail downloads, gets sorted into folders by the various rules, but the folders never show up with a number showing new messages. I have missed so many emails lately, I think I will have to go back to POP...or add a line to every single rule saying "mark as unread".
    Is there a simple solution to this problem I am overlooking?
    Thanks...Sam

    Yeah, the stupid part is that all SPAM comes marked as unread. So I get to see that I have spam, just not legitimate mail. Ugh.

  • How does music downloaded on one device get onto all of my other devices?

    I understand what "sharing" is, but this is not my question.
    When I downloaded three songs from iTunes yesterday, it asked me something about sharing this song with my other devices. I'm sorry but I don't rememeber the exact wording of the message as that was the first time I had ever seen it (I don't download a whole lot of music).
    I downloaded three songs from iTunes into my MacBook Pro (10.7.1 Lion). But I also have an iPhone (3GS running iOS4), and iPod Touch (running iOS4), and an iMac (running 10.6.8 Snow Leopard). All of these devices are on my home network (via an Airport Extreme).
    I sort of understood the message with the meaning that, okay, the song that you just downloaded to your laptop will also be available on all of your other devices....Did I not understand this correctly? Because I just looked at all of my other devices and computers and the new songs are not there. I crated a new "list" for the new songs, and it is this new list that I looked for (should I be looking in a different location?).
    Thanks for any help!
    PS: I did a "sync" of my iPhone and iPod Touch with my iMac, but the songs do not appear anywhere except in their original location, which is my MacBook Pro. I do not sync my devices with my MacBook Pro because that is my "travel" computer, and I use my iMac as my main "base" computer.

    Hello,
    I already did these things (listed above). Maybe I didn't ask my question the right way, so let me give it another shot.
    What do I have to do on my end in order to get my new music (that was downloaded into my MacBook Pro) into my iMac, iPhone, and iPod?
    Is there something I have to do---like a sync? Or do I have to somehow "tell" the system to go and grab these new songs? Or is this something that is completely out of the user's hands and it just "happens" as long as you have the settings as listed above? Because this seems to be where I'm having the problem. I have all of my devices set up properly, and I downloaded the three new songs last night. So far, only my my MacBook Pro has the new songs. How long does it take for them to get over to my other devices? And if someone can please clarify this for me: Is this all 100% automatic in that I don't do ANYTHING at all on my end? It just somehow happens? I'm a bit confused in this area.
    Thank you.

  • Why does my computer not connect to the internet but other devices do

    I have a mac book pro, and it has not been connecting to the internet lately.  I also have an iPhone as well as other devices that do connect to the internet.  Why is this? Is there anything I can do to reset the internet settings on my computer, or some other solution to fix this?  I am guessing th problm is not my internet, because the other devices connect.

    1. Turn router off for 30 seconds and on again, this will refresh the IP address of the router? You may not have access to router.
    2. Reset network settings: Settings>General>Reset>Reset Network Settings
    3. Try adding your SSID and Password manually
    Settings>Wi-Fi>Other...>Other Network

  • Why don't my iMessages don't go to my iPad?

    I have iMessage configured on both.  I can send an iMessage to a contact, but when they reply, it doesn't return to my iPad.  In fact, NO iMessages goto iPad.
    They are configured the same, with the same AppleID.
    I don't understand, this is not how Apple said it should function.  Cannot resume, or continue conversation when switching devices as Steve demoed.

    I've been playing with this. In order for them to show up on both devices, messages must be sent to your apple ID. I also changed my iPhone to send messages from my apple ID. Keep in mind conversations you have already started by sending from your phone number will not show up on both devices. I found that I had to start a new message to get it on both devices once I changed my caller ID on the iPhone. iPhone settings/message/receive at/ caller ID. There will not be a caller ID option if your apple ID is not registered under messages on your iPhone.

  • Why don't older customers get iWork for free?

    I don't get why older customers don't get iWork for free. I just don't get it.

    Darknight83 wrote:
    What I am trying to figure out is why older customers don't get the software for free.
    Nobody here can tell you why Apple doesn't always make free stuff available to everyone.  But you can give them your opinion about at
    http://www.apple.com/feedback

  • Why don't I ever get the address I am seeking?

    When I search on Firefox, I never get a list that actually contains the site I want. Instead, I get a bunch of sites that may eventually take me to the site I want, but to use them I either have to put up with a lot of bull or pay first. Recently one of those sights charged me $30 just to get to a site I could have connected with using Internet Explorer at no charge. I have never paid on IE.
    Don't you ever list the actual sites in your search list or is it always just satellite sites whose sole purpose is to make money?

    Hello Stickerless!
    Be sure to check if the notifications are enabled in Settings > Notifications and check what does appears in the notification center.
    If it's everything configured and it doesn't work as it should this issue may be resolved by resetting all settings in Settings > General > Reset.
    If that doesn't work, create a backup of all your content and restore the device.
    Backing up your device - http://support.apple.com/kb/HT1766
    How to restore - http://support.apple.com/kb/HT1414?viewlocale=en_US
     hiniv

  • Why don't iTunes 11 get update of apps by syncing the already updated apps on iPad or iPhone?

    Please help!!!
    So annoying...coz it is too much waste the time waiting for every devices apps updated.

    Hello Stickerless!
    Be sure to check if the notifications are enabled in Settings > Notifications and check what does appears in the notification center.
    If it's everything configured and it doesn't work as it should this issue may be resolved by resetting all settings in Settings > General > Reset.
    If that doesn't work, create a backup of all your content and restore the device.
    Backing up your device - http://support.apple.com/kb/HT1766
    How to restore - http://support.apple.com/kb/HT1414?viewlocale=en_US
     hiniv

  • TS3991 Why don't shared files on the icloud update on my devices after they are edited by others?

    I have 4 different devices with 3 users. All users use the numbers app on iPads and the shared files don't for other users. For devices linked to the same Apple ID the updates appear immediately.
    What can I do?

    Purchased music does not count against your iCloud storage and you cannot get rid of them in the purchased tab.
    What is backed up
    You get unlimited free storage for:
    Purchased music, movies, TV shows, apps, and books
    Notes: Backup of purchased music is not available in all countries. Backups of purchased movies and TV shows are U.S. only. Previous purchases may not be restored if they are no longer in the iTunes Store, App Store, or iBookstore.
    Some previously purchased movies may not be available in iTunes in the Cloud. These movies will indicate that they are not available in iTunes in the Cloud on their product details page in the iTunes Store. Previous purchases may be unavailable if they have been refunded or are no longer available in the iTunes Store, App Store, or iBookstore.
    Look here for help on managing iCloud storage.
    http://support.apple.com/kb/HT4847

  • How can I stop emails pushed to the Curve from getting marked as "Read" in Outlook!

    I get 100 or so emails a day, and get them bolded in Outlook until I read them.  In two of my three email accounts, the emails remain bolded in Outlook even after being pushed to the Curve.  In the third, which runs through my work server, all emails come in unbolded as if they're already read. 
    This is confusing me and making it hard to go back and pick up important emails (and delete others).  Anyone got any ideas of how to fix this in my email set-up on the Curve?
    Thanks much. 

    your other two email accounts, which type are they? MSN, Hotmail, Yahoo, or Gmail or another provider? I have one of each of these and i have mine setup as delete on mailbox and server, wireless reconcile on and on conflict mailbox wins, so when i see these emails on my computer, they are already read and if deleted( yahoo and gmail) will be deleted on the server, the msn and hotmail just stay as read but not deleted.

  • Items wont get marked as 'Read' in Outlook

    The problem I have is that when I read an email on my Iphone it continues to appears as 'Unread' on Outlook.
    So at the moment I have 24 unread emails in Outlook dating back to the 12 of May and only 9 unread emails on my Iphone.
    My Iphone is set to sync the last month of emails in my inbox and I have an email from last Thursday I definitely read on my Iphone (and appears as unread) which appears as 'Unread' in my Outlook despite having a full 3G signal and the WiFi is switched off as well.
    Anybody seen this before or can suggest a fix?
    Thanks
    David

    Hi and Welcome to the Forums!
    Here is a KB that documents the various OTA reconciliation features via BIS:
    KB05133 Email reconciliation features for the BlackBerry Internet Service
    Hopefully it contains the information you need.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Why don't my updated apps in iTunes sync to my devices when syncing?

    I used to be able to just update all apps on iTunes which downloads all of the latest updates. Then I could plug in my iphones and ipads and hit sync and it would transfer (sync) the updated apps to my plugged in device.  Now I do sync but it does not transfer the apps.  I have to dowload the updates on each of my three devices which takes lots of time, battery life, and bandwidth usage.  Before I could even do the updates on one of my phones and then when plugged in to itunes and synced it would transfer the updated app to the itunes where I could then connect other devices and sync them.  Am I missing something?  It seems stupid to have to do a 435MB update four different times for the four devices where I could just do it once on itunes and sync it to the other devices. I have iTunes 11.1.0.126 and running on WIndows Vista PC

    Same problem for me... It should update apps automatically...
    I found that to update the apps I have to push the button on the right side of the app in tha "App" view of the Iphone (the wondow where you devide which apps to install on the Iphone). Description will change from Update to Will Update, and after that when I sync the app will be updated.
    To select all the apps to be updated, find the first one and click on the Update button holding down Ctrl key, and after that all the apps will be updated... Annoying, but it is a workaround to avoid checking all the apps one by one.

  • Is my router and school's network making imessage fall out of sync with other devices?

    Hi,
    I'm having issues with iMessage and other iCloud services syncing properly between my iPhone, iPad and Mac, which are running the most up to date versions of their OS's
    This issue happens when I'm living in my school's residence. I have my own router (D-Link DIR-601) hooked up to the ethernet jack on my wall and I'm thinking that things like iMessage are having trouble finding my devices because these services are going through the internet and then through two networks that have two different sets of rules (ex: firewall, NAT)?
    I think that's the issue, because when I'm at home for summer and holidays iCloud services work perfectly fine on my home network.

    Could be.  If your school's router is handling the DHCP service, make sure you don't try to enable DHCP on your router too.  If that's the case you would want to disable DHCP on your router so it operates as a wireless access point.

  • How do I turn off iCloud so that my iMessages aren't shared with the other devices on my account

    When I send a message on iMessage on my iPod touch, it comes up on the family iPad. How do I configure the iCloud settings so this doesn't happen? Thanks

    Either use different icloud IDs (accounts) on each device, or on the iPad, turn off iMessage (Settings>Messages).  Or use a different Send & Receive address (same settings page).

Maybe you are looking for

  • 30 pin Female ADC adapter?

    I just picked up a 2001 17 inch Stusio monitor and want to connect it to a MacBook pro. The monitor has a 30 pin connector so I need a DVI to ADC with a female connection at the end. All the convertersI found have male ends. Is there a female end?

  • Message do not exists in adapter engine

    I have a message being sent to IE via JMS Adapter . In Communication channel monitoring i could see the message Id & error message(Error in converting Binary message)  but with that message id i could not find any entry in Message monitoring - > Adat

  • Pod re-sizing compromises graphics in Share pods

    How can I avoid or at least minimize the annoying effect of a pod being resized on every attendee's local screen? I've been charged with creating a wide variety of jpgs to be uploaded into share pods but am confounded by the seemingly random way in w

  • Mysterious Media Attaching to Objects - Why?

    I'm working on a FCPX transition in Motion and I randomly get the following error when I save the project. "One or more objects that use this media will also be deleted. Are you sure you want to delete the media used for these objects?"  I didn't try

  • ArrayNew and cfinvoke

    Hello Everyone, I am working on a small tool and I want to invoke another function from within another function while passing an array to the function being called. I create the the array: <cfset zones = ArrayNew(1)> <cfset ArrayAppend(zones, #get_op