Why don't Photostream keep edits done in iPhoto?

If I rotate photos in iPhoto and them put them in PhotoStream they show up un-rotated - why is this?

Similar Messages

Why no response when hitting edit button in iPhoto

I'm using Mac os 10.10.1 and elements 13.
When I hit the edit button in iPhoto, nothing happens. I have iPhoto preferences set to use elements for edits. Also when I am at open at top left bar in elements , and try to import a picture from iPhoto library, I get Message that says it doesn't recognize file type, but photos are either jpg or psd.
-*-*- Following instructions from another posting, I changed preferences back to "edit in iPhoto",
and... I can go to the thumbnail image and select Edit in external editor and still nothing happens.

you have to check some points:
1) what r the views maintained in material master and material type.
2) Accounting view is maintained or not.
3) In PO, check the delivery tab page. Check the GR is valuated or non valuated.
4)Check the accounting document is generated at the time of GRN.
Sachin

Photostream keeps turning off in iPhoto.

Every time I quit and then reopen iPhoto, photostream is in a turned off state. Is this a bug or am I missing some setting?

I am having the same issue with this. As an aside, photo stream is not working on my Windows 7 computer at work. Although this launch went better than mobileme, I think it is still a C- grade. I'm really not sure why Apple is trying to recreate the wheel in terms of syncing instead of using some of their cash horde to purchase a company like sugarsync.
I really like some of Apple's in-house software, but they are really behind when it comes to syncing services. I think I'm going to wait using icloud for a good 6 months until they have worked out the bugs and added more functionality.
At least with sugarsync, I can view every spreadsheet and document on my iphone, I just can't save any edits. I don't have to "upload" through a webpage.

If I post a photo on Photostream, then edit it in iPhoto, will the edited version replace the original?

I am working with RAW photos. If iPhoto uploads immediately to Photostream after adding pics and then I edit the photo, will the edited version replace the original on Photostream?

Yes.
If you want to do this to squeeze more songs onto a device then take advantage of the feature to downsample as songs are transferred. Device > Summary tab > Convert higher bitrate songs to to 128kbps AAC
If you're running out of room on your library's hard drive then it is time to buy a bigger drive.
tt2

HT5622 I don't get why my Apple ID keeps saying this device is already associated with an Apple ID and something about 90 days but also it doesn't let me download any of my pre orders when available it has happened to me twice and my past purchases help m

I don't get why my Apple ID keeps saying this device is already associated with an Apple ID and something about 90 days but also it doesn't let me download any of my pre orders when available it has happened to me twice and my past purchases can someone contact me and give me some help sorting this out
Much appreciated
<Email Edited by Host>

Hi there
I'm getting a similar problem with my Macbook Pro. itunes match was working fine until two days ago when i created another 'user id' for the laptop and then an itunes account for that user under their profile. Now i cant turn on itunes match on my itunes under my user account. Contacted Apple today who said to use the Express Lane and email the problem and they might be able to make an 'exception' on the account. Otherwise I'll have to wait 88 days to access a lot of my music on the macbook pro. itunes match is still working on the iphone 4S and ipad2.
Can anyone help? The only thought was too re-stream the laptop. Ive already tried deauthorising the other user but it made no difference.
Thanks
Jules

Why don't we keep Oracle Database ARCH logs in RAW devices

Hi All,
Why don't we keep Oracle Database ARCH logs in RAW devices?
How ARCH process is related to Block Device and Character Device ?
Thanks,
Tusar
Edited by: user11987718 on 26-Jun-2012 09:59

Why don't we keep Oracle Database ARCH logs in RAW devices? 1.This is because raw devices do not enable sequential writing of consecutive archive log files.
http://docs.oracle.com/cd/E11882_01/rac.112/e16795/rman.htm#RACAD320
2.with raw you have to specify the exact size of the file at creation time, in contrast with file system, where you can create file without specifying its size, start writing to it, apending new blocks to it until you are done, and thus creating a file of whatever size it needs to be to hold all information.
http://www.dbasupport.com/forums/archive/index.php/t-16429.html
3.raw file systems are difficult to manage because you cannot run normal os commands on them.(as there is no file systems)
How ARCH process is related to Block Device and Character Device ?A block device would read/write bytes in fixed size blocks, as in disk sectors. Character devices read/write 0 or more bytes, in a stream, such as a TTY or a keyboard.
For more details about what is block and character device type :
http://en.wikipedia.org/wiki/Device_file
And now think, how arch process is related to block and character devices.
Regards
Girish Sharma

I am a Academy of Art University student. I purchased my CC on 04/18/2014. Since I don't graduate yet, I really don't know why can't I keep using my CC, or redeem it again!!!! Please help!!!!

I am a Academy of Art University student. I purchased my CC on 04/18/2014. Since I don't graduate yet, I really don't know why can't I keep using my CC, or redeem it again!!!! Please help!!!!

Contact Adobe Support directly... preferably before the 18th.
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

Hi there, i want to upgrade to snow leopard in order to purchase lion os from the snowleopard store. The problem is that i can't find a shop selling original snowleopard os dvd in my country. Why don't you keep an online s.leopard so we can purchase it ?!

hi there, i want to upgrade to snow leopard in order to purchase lion os from the snowleopard store. The problem is that i can't find a shop selling original snowleopard os dvd in my country. Why don't you keep an online s.leopard version so we can purchase it ?!

Hi,
Have you tried your country's online Apple Store? Snow Leopard is still available on mine, here in the UK. Otherwise, your best chance is eBay. You might also try CeX.
Good luck,
S.

Hi Apple! I am having a few problems with my 6 month old iPad mini (ios 7.1.1). I am using my iPad and then some time later it just restars! Don't know why and it just keeps doing it! Please fix or if I restore my iPad will it do any good? Thank you

Hi Apple! I am having a few problems with my 6 month old iPad mini (ios 7.1.1). I am using my iPad and then some time later it just restars! Don't know why and it just keeps doing it! Please fix or if I restore my iPad will it do any good? Thank you

Plug your iPad into your computer, open iTunes, and click Restore. This will reset your iPad to factory settings, so make sure everything important is stored safely. Once the restore is complete, do NOT restore from your backup.
If you still have problems, take the iPad to the Apple Store or another AASP (Apple Authorised Service Provider). If you're still within warranty, any service will be of no cost. Check your serial number here or find your receipt.
Hope I've helped!
PS: This is a peer-to-peer forum. Apple generally doesn't pay attention here.

Why does i tunes keep bouncing and not open after I have done an update

why does i tunes keep bouncing and not open after I have done an update ?

Hello, romani-jo.
Thank you for visiting Apple Support Communities.
Try resetting your System Management Controller or SMC. Try launching iTunes after processing these steps. If the issue persists, try downloading a fresh copy of iTunes by accessing the second link below.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
http://www.apple.com/itunes/
Cheers,
Jason H.

Why my edits don't transfer between lr4 and cs4

I edit my images for the most part in LR4 then export as a raw file into a new folder. Then when I view the images in bridge my edits don't show up. Do I have to convert to JPEG for my edits to stick?
Thank you!!!

Victoria Bampton wrote:
The short answer is yes. CS4 won't understand the edits you've done in LR4, because it's so much older. You'd need CS6 for PS to understand them.
The original question asked about JPGs. The user could convert the photos to TIF, avoiding the drawbacks of JPGs, which would then work in CS4.

How to rotate photos in photostream so they don't show sideways on apple tv

how to rotate photos in photostream so they don't show sideways on apple tv? i am viewing my photos on my tv and many of them are sideways. how do i fix this?

ihint
Welcome to the Apple Discussions.
You'll need an application that edits the pics to do this: Acorn, Seashore, Photoshop Elements, Graphic Coverter are some, but there are many others - search on MacUpdate
Of course, iPhoto will do this too.
Regards
TD

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

Keeps printing done...

I know why this code keeps printing done, its one my for loops. Currently this code does percisily what I want it to with a few hiccups that will be fixed. The current problem is that it keeps printing done for each row or record it places in the csv file. I need it to print to the file and then when it is truly done - print done. Also this is really slow....there are 1500+ records to pull from the cdata section, convert to comma delaminated and then place into the csv. the ripping and converting takes seconds. the writing's to the file takes .....well i never let it finish, every time I press stop its up to the 600th record and that's after a couple minutes.
I know I am missing something. I just need some eyes to look at it. its not the most efficient way to do this, I get that. All i care about right now is making it print done ONLY when it is truly DONE writing to the file - and it shouldn't take so long to write to a file. 600 records in 2 minutes? something is wrong.
Code is bellow. - prepare for a long read.
package xmlcsv;
import java.io.File;
import java.io.FileWriter;
import java.util.StringTokenizer;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import org.w3c.dom.CDATASection;
import org.w3c.dom.CharacterData;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
* Essentially we take a xml file, find its cdata section and then
* process the information in there to then spit out to a csv file.
public class XmlCSV {
      * We need to process the data in the Cdata section and spit it out in a csv file.
      * This is the "main" part of the program which is run.
      * @param args
     public static void main(String[] args) throws Exception
          File file = new File("Data.xml");
          DocumentBuilder db = DocumentBuilderFactory.newInstance().newDocumentBuilder();
          Document doc = db.parse(file);
          doc.getDocumentElement().normalize();
          NodeList nodes = doc.getElementsByTagName("TransmissionWrapper");
          for (int i = 0; i< nodes.getLength(); i++)
               Element element = (Element) nodes.item(i);
               NodeList cData = element.getElementsByTagName("TransmissionData");
               Element line = (Element) cData.item(0);
               //test
               getInfo(getCData(line));
      * We want to get all the data out of the CData Section.
      * Pass it into the getInfo() method to then get the
      * the data which will be parsed and thrown into a csv file.
      * @param e
      * @return
     private static final String getCData(Element e)
          NodeList child = e.getChildNodes();
          if (child != null)
               for (int i = 0; i< child.getLength(); i++)
                    Node childNode = child.item(i);
                    if (childNode.getNodeType() == Node.CDATA_SECTION_NODE)
                         CDATASection cdata = (CDATASection) childNode;
                         String data = cdata.getData();
                         return data;
          return "Theres nothing there";
      * We want to remove all pipes then replace all those pipes with commas
      * the simple .replace() does not work. so we pass all the data into a string array and
      * pass it to a method that reforms the data and replaces pipes with commas
      * TODO: I didn't realize some information is comma deliminated so we have:
      * CHEVROLET,COBALT which may pose a problem later.
      * @throws Exception
     private static final String getInfo(String str) throws Exception
          StringTokenizer st = new StringTokenizer(str.trim());
          while (st.hasMoreTokens())
               String[] info = str.split("\\|", -1);
               for(int i = 0; i<info.length; i++)
                    returnComma(info);
          return "Nothing to return";
      * We take the String array of data and reform it back into
      * a comma deliminated peice of data that we can then use with CSV
      * @param str
      * @return
      * @throws Exception
     private static final String returnComma(String[] str) throws Exception
          StringBuffer sb = new StringBuffer();
          for (int i =0; str != null && i < str.length; i++)
               sb.append(str);
               if(i < str.length - 1)
                    sb.append(",");
          writeToFile(sb.toString(), "data2.csv");
          return null;
     * Write the data to a csv file.
     * @param st
     * @param filename
     * @throws Exception
     private static final void writeToFile(String st, String filename) throws Exception
          FileWriter fw = new FileWriter(filename);
          fw.append(st);
          fw.flush();
          fw.close();
          System.out.println("done");

The question(s) is: +"How do I make it write to the file and print done only when done?"+Move the print statement out of the loop?
+"Why is it taking up to 5-10 minutes to write 600 records to a file when it takes 30 seconds to parse the pipes, and put commas in and spit it out to the page"?+Because you are writing to the file every time you call returnComma(), and you are calling returnComma() lots of times. Most probably your entire file writing scheme is up the pole. You can't really want the file just to contain whatever the last invocation of returnComma() printed, and if you do why do all the preceding writes at all?
Also returnComma() doesn't return a comma. Poor naming. Fix its name to describe what it really does.

Photo-size edits don't save

All my other edits---color, contrast, effects, &c, all render and save when I hit Done or click another photo, but the Change Size slider edits don't seem to save: when I come back to the photo it's the same size as it was originally. And of course there's no "save file as" command. Can anyone comment or help---
John

John:
If you're referring to cropping a photo you have to hit the Crop button after setting the crop area. Just hitting the Done button will not save the crop.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Why don't Photostream keep edits done in iPhoto?

Similar Messages

Maybe you are looking for