Why don't we use flash player on ipad ? Too much aplication is need flas player.
Why don't we use flash player on ipad ? Too much aplication is need flas player.
rahmioyekcin wrote:
Why don't we use flash player on ipad ? Too much aplication is need flas player.
Because, as has been stated numerous times today, Adobe has been unable to create a version of flash that met Apple's requirements
Stedman
Similar Messages
-
Why don't you use feather touch home button?
why don't you use feather touch home button?
We found out the feathers we were gonna use came from protected birds, so we had to scrap that idea.
Oh, and there are not enough pigeons. -
Architecture: Mware View Horizon 5.3 with SVGA K1 GRID, W7 64 bit 4GB RAM and 3 CPU and 512MB VRAM
Issue 1: Photoshop setting is gpu[0].MemoryMB=128. Why ? It wolud be 512MB.
Issue 2: Sometimes, We get the error not enough Vram. Why don't Photoshop use all 512MB vRAM?@Photoshop can only see what your video card driver reports.
You might want to update your video card driver from the GPU maker's website. -
Why don't I receive iMessages on my iPad when sent to my iPhone? When I send messages from my iPad, they show up on my iPhone, but doesn't hold true the opposite way?
Ok. So I figured out that I can add the email address to my iPhone 4s to receive the iMessages sent/received from my iPad. How do I get the messages on my iPad that were sent to my iPhone? Is it possible?
-
Why can't I use smileys on my iPad?
I was wondering if anyone knows why we can't use smileys on the iPad (mini air). On iPhone it's possible.....
I'd be suprised if it isn't possible.
Go to Settings->General->Keyboard->Keyboards
From here select Add new keyboard you're looking for something called Emoji
Regards,
Steve -
I need to organize medical photos. They are pre-op and post-op photos. What is the best way to organize them? should I use iphoto or is that too much trouble? Since they occur on different days, organizing by event does not seem appropriate. Also, organizing by face is not always possible as some are close up photos of an individual eye. Surely, this has been done before, and I don't want to spin my wheels reinventing this.
Who can tell with that amount of information to work with?
iPhoto is not limited to Events or Faces as organizational tools - Albums, Keywords, various forms of metadata can be leveraged for use as well, and these are often more flexible. Really it's up to you to look at the tools available and see if they suit your usage scenario. -
will all my music transfer from the mac to my macbook air? I don't want it to because there is too much and the air will not hold it.
Welcome to Apple Support Communities
First, when you are going to turn off or restart your Mac, you will see a box called "Reopen windows when logging back in" in the shutdown or restart window. Untick this box and see if the App Store opens automatically in the next startup.
If it starts, open System Preferences > Users and Groups > Login Items, and see if the App Store shows up. If so, remove it from this list -
Revision: 10216
Author: [email protected]
Date: 2009-09-13 08:20:06 -0700 (Sun, 13 Sep 2009)
Log Message:
Change Label verticalAlign to use "top" if there is too much text. RichText already works this way.
QE Notes: None
Doc Notes: None
Bugs: SDK-20589
Reviewer: Gordon
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/GraphicsTags
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-20589
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Label.asRemember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
Revision: 10144
Author: [email protected]
Date: 2009-09-10 18:46:11 -0700 (Thu, 10 Sep 2009)
Log Message:
Change Label verticalAlign to use "top" if there is too much text. RichText already works this way.
QE Notes: None
Doc Notes: None
Bugs: SDK-20589
Reviewer: Gordon
API Change: No
Is noteworthy for integration: No
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-20589
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/Label.asRemember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
Why can't I use Flash player?
Hi
Does anyone know why Apple will not use Adobe Flash? It is really frustrating to be told " you need to install the latest version of Adobe Flash player" and know that it cannot be done!No Flash for iPads, iPhones, or iPods
Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash. Adobe is not providing Flash for Apple iOS devices, and they no longer provide Flash for any other cellular phones. Flash is officially gone.
Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
A sample of Apps that can display some Flash content:
1. Puffin
2. SkyFire
3. Photon Flash
4. Browse2Go
5. Swifter
Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that." -
Why can't i use flash!!??
i have installed flash over a dozen times now, disabled every
pop-up blocker, virus, or firewall protector, and no website will
ever load. they all tell me to download and install flash all over
again. the google toolbar manages to work (even though i don't want
it), but no matter how many times i install it, restart internet
explorer, and restart vista it is never recognized.
any advice, kind people smarter than me? i had used flash for
months up until a couple weeks ago when this began....help!!It's working!!!
Here's where I went and what I did:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19166&sliceId=2
Scroll down to #4. Just above that is this:
If the ActiveX Control for Flash Player fails to install,
download the executable installer.
If the information above has not resolved the issue, download
the executable Flash Player installer here:
Download and unzip Install_Flash_Player_9_ActiveX.zip. (
http://www.adobe.com/support/flashplayer/ts/documents/tn_19166/Install_Flash_Player_9_Acti veX.zip)
Save this installer to your desktop, close out all
applications, and run the installer. This may help if you are
having trouble with the ActiveX installation from Adobe.com. To
confirm that Flash Player has installed successfully, please visit:
www.macromedia.com/software/flash/about/.
All of a sudden Flash is working again! -
Why can't I use face time on iPad 2 with 3g iOS 6.0.1
why can't I use face time on ipad2 with 3g and ios 6.0.1
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
Cheers, Tom -
Why my iphone 4s getting hot and bettery drains too much fast ??
I Have iphone 4s and it is a big peoblem for me now because its bettery drains too much fast and it becomes too much hot after some time. I am too much worried about that. I dnt knw what can i do now with that. Please help me in this matter
The battery can be too much used. There are a number of ways to help batter life from too much draining.
First, you might want to have an Apple technician run a diagnostic on the battery to see if it is either bad, or consumed. Consumed meaning the battery has lived its life. Batteries are like tires, they will run out sooner or later until it needs to be serviced.
Second, you can preserve battery life by turning your brightness down, You can turn off background app refreshes, your some location services off, turn some notifications off that you might get regularly that you don't really need, you can also change email setting to get manually rather then pushed from the email server, lastly you can turn off WiFi and Bluetooth when not around a WiFi network or a Bluetooth device.
Good luck! -
I purchased CS5 for my laptop and now want to use it on my Mac book too. Do I need to buy a separate license?
Serial numbers are platform specific. You cannot use a PC license on Mac and vice versa. You would need to run a platform swap to use it on a Mac and upgrade to CS6, but then would lose the PC license. Therefore you eitehr need to buy a separate license for the Mac or join Creative Cloud.
Mylenium -
Why don't be used composite index in partition table.
A table has done range list partition.
Then, I create a composite index named INDEX_N2(COLUMN_005, COLUMN_002). --COLUMN_005 AND COLUMN_002 ARE VARCHAR2
When I run the SQL
select 1
from table1 T1
where T1.COLUMN_005 = 'x'
and T1.COLUMN_002 = 'y'
And view the explain plan, INDEX_N2 has been used.
But when I join the COLUMN_005 to other column, the index will not be used.
The SQL is like below.
select 1
from table1 T1, table T2
where T1.COLUMN_005 = T2.COLUMN_002 --T2.COLUMN_002 IS VARCHAR2
and T1.COLUMN_002 = 'y'
The explain plan is like below
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 426 | 44730 | 65367 (1)| 00:13:05 | | |
|* 1 | HASH JOIN | | 426 | 44730 | 65367 (1)| 00:13:05 | | |
| 2 | PARTITION RANGE ALL| | 8 | 792 | 5 (0)| 00:00:01 | 1 | 32 |
| 3 | PARTITION LIST ALL| | 8 | 792 | 5 (0)| 00:00:01 | 1 | 8 |
|* 4 | TABLE ACCESS FULL| TABLE1 | 8 | 792 | 5 (0)| 00:00:01 | 1 | 256 |
| 5 | PARTITION RANGE ALL| | 1112K| 6519K| 65355 (1)| 00:13:05 | 1 | 34 |
| 6 | PARTITION LIST ALL| | 1112K| 6519K| 65355 (1)| 00:13:05 | 1 | LAST |
| 7 | TABLE ACCESS FULL| TABLE2 | 1112K| 6519K| 65355 (1)| 00:13:05 | 1 | 442 |
Query Block Name / Object Alias (identified by operation id):
1 - SEL$1
4 - SEL$1 / T1@SEL$1
7 - SEL$1 / T2@SEL$1
Predicate Information (identified by operation id):
1 - access("T1"."COLUMN_005"="T2"."COLUMN_002")
4 - filter("T1"."COLUMN_002"='y')
Column Projection Information (identified by operation id):
1 - (#keys=1)
2 - "T1"."COLUMN_005"[VARCHAR2,150]
3 - "T1"."COLUMN_005"[VARCHAR2,150]
4 - "T1"."COLUMN_005"[VARCHAR2,150]
5 - "T2"."COLUMN_002"[VARCHAR2,20]
6 - "T2"."COLUMN_002"[VARCHAR2,20]
7 - "T2"."COLUMN_002"[VARCHAR2,20]
Note
- dynamic sampling used for this statement
My Questin is:
Two columns are include the columns of index.
Why it can't be used?
ThanksI create a new index on column2, (INDEX_N3)
and change SQL to
select 1 from table T1 where
T1.COLUMN_002 = '848K 36892'
This time INDEX_N3 will be used.
but change SQL to
select 1 from table T1 where
T1.COLUMN_002 = '848K 36892'
and T1.COLUMN_004 = '1000'
The explain plan will show full scan.
Why?
Thanks.
Maybe you are looking for
-
Imac won't start, not sure if it is the hard drive
My computer wont start now. It was taking ages to start up and now it wont at all. It was suggested on this forum that the hard drive was knackered. I pressed squiggle button + R, and then copied the disk to an external hard drive. I then re-started
-
Example "sample test report" doesn't run - Error -1073741819
I am trying to run the "Sample Test Report.vi" example in a totally unmodified version. I receive the message "Unknown System Error in Font Style.vi->Set Report Font.vi->Sample Test Report.vi" I have some trouble finding where the error occurs exactl
-
Need help getting my iMac to boot to main screen
Last night while I was using my iMac, we had some serious rain and all of a sudden the power went out. Then it went back on, and then off again. The mac was off and I figured give it a rest? Went back to restart today and I can't get past the apple l
-
Hi all, i was recently asked to develop the BI server. I was wondering what that meant. We just installed ECC 6.0 (new implementation rather than an upgrade) and have a stand alone server for BI. could you please tell me what i need to do to develop
-
Mass T-code Of Planned Order Deletion
Dear All Is there any mass T-code For Deletion of bulk planned order. An PIR. Rgds Pankaj Agarwal