Why downgrade instead of update?

After i "updated" the ipod software, i cannot manage my podcasts. Is there any explanations for that?

Okay, well the first thing is for you to ignore other threads and concentrate on your problem, not theirs.
Things appear to have changed since your first post (it was Podcasts, now it's "most of the stuff and Playlists". So one thing at a time, let's look at the Podcasts:
Let's try and walk through some steps to ensure you hasve the correct options set:
1. Connect your iPod to iTunes
2. (in iTunes) click on the device>your iPod's name> Podcasts - there should be a tick in the box named *Sync Podcasts*
3. ... underneath that what choices have you made? For example, my options are *Automatically include>all>episodes of>all podcasts.* Any other choice will mean that some or all Podcasts will not be transferred to your iPod. (We can discuss that later if you wish.)
How did you get on?
Now, what about "most stuff and Playlists"?
A. switch to device>your iPod's name> Summary.
B. Is the option *Sync only ticked songs and videos* checked (on)? - It should be
C. now switch to the device>your iPod's name> Music.
D. the *Sync Music* option should be ticked
E. what choices have you made in the section under the *Sync Music* optiion? (My choice is *Entire music library* and *Include music videos.)*
With the choices I have made, basically everything in my library is Synced to my iPod. However, if I want to remove one or two tracks, I then untick the track itself in the library. *(Library/Music?<song name> "untick")* Then Sync.
Has any of this made things clearer for you? If not, where do you get stuck?
Phil
Message was edited by: the fiend

Similar Messages

  • Why do they dribble updates in one at a time instead of combining them into a new soft pack.

    Every time I turn my computer off and then turn it back on there's a new update to download. Why aren't these updates combined into a single update instead of dribbling in one at a time. They appear to be older than my computer. I don't understand why these updates weren't included in the newer software or as a new soft pack.  When I upgraded to 8.1 I would've thought any security issues would've been included.
    Is there a way to get all the updates at one time rather than getting them dribbled in one at a time?

    lostinthetech wrote:
    Every time I turn my computer off and then turn it back on there's a new update to download. Why aren't these updates combined into a single update instead of dribbling in one at a time. They appear to be older than my computer. I don't understand why these updates weren't included in the newer software or as a new soft pack.  When I upgraded to 8.1 I would've thought any security issues would've been included.
    Is there a way to get all the updates at one time rather than getting them dribbled in one at a time?
    Unfortunately HP has nothing to do with this beyond their own drivers. You should contact MS customer service with your concerns.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Why won't my apps update when I push update button it goes straight to the site instead of updating

    MMy apps will not update. They go straight to the site instead of updating. just started this. what is wrong?

    Hi ..
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    No data is lost due to a reset.

  • Why does that app update not clear in App Store on iTunes Sync?

    I have noticed this as a problem ever since I upgraded to iOS8. I always update my apps on my iOS devices by a sync with iTunes. The reason I do this is because I do not like the annoying blue dot beside the app after I update it until I actually open the app. I have been doing this successfully for years. Now that I am on iOS8 I still sync to update but the update badge will not reset even though the app store knows the app is updated. The badge only goes away (resets itself) when there is a new update available in the app store. To overcome this I have turn off notification in the app store so I do not have to see the badge on my screen but I don't understand why iOS 8 is creating this problem. This did not occur in iOS 7 or 6. I thought it was initially because I installed a Beta app for Accompli but that was not correct because I did a complete restore and rebuilt my iOS device from scratch, did not install a backup. Is anybody else having this problem?
    Here is how to duplicate:
    Wait for you to have apps to update on your iOS device but don't update them through the device.  You will need to make sure the auto update for Apps is turned off.
    Download the updates for the Apps in iTunes.
    Make sure you have the box check in iTunes to for "Automatically install new apps".
    Sync
    iTunes will sync and update the apps on your device and there will be no blue dots on the update. However, the app store on your device will see that there is no update available any more, the button beside the app in the update section will say open instead of update, but the badge will not reset.  Used to be the badge would reset and they updates would no longer appear in the app store at all.

    I assume no one has encountered this before?

  • Why doesnt Adobe just UPDATE Flash Professional? Arent they reinventing the wheel?

    Congratulations on getting to open beta with Flash Catalyst!
    I know its late in the game to mention something like this but why didnt Abobe just update Flash Professional?
    It seems that the arguments for flash Catalyst center around the following:
    1) smooth workflow between Photoshop & Illustrator, especially because of the same layer view
    2) No coding required to create components out of artwork
    3) Can create FXG  and FXPs to be used in Flash Builder
    4) Can create multi screen aplications
    1) 2) and 3) could all be solved by adding a new types of symbols to Flash Professional's 3 currently available symbols(MovieClip, Button, Graphic)
    1) could be solved by adding a new Sprite symbol.
    Flash Professional needs to be updated to keep up with and match the structure of AS3 anyway.
    Sprites were added in AS3 and now wireframe components are being added to the code structure, why not just at that on the design side as well?
    Sprites are essentially MovieClips with out a timeline.
    So if you created a new Sprite symbol and opened it up in the timeline, you would only see one frame with folders and layers.
    A Sprite symbol is essentially organized the in layers and folders and would just like a photoshop file.
    And if you really want it to look like a Photoshop layout, then you just move the timeline view over to the right.
    This would solve problem 1.  Designers could import their artwork into Flash Professional as a Sprite and it would be a seemless experience.
    Obviously I'm not saying that a bitmap is a sprite. But I am saying that layers of bitmaps and could be organized inside of a Sprite. And the designer could turn any of the assets into a Button, MovieClip, Graphic, Sprite, and hopefully other Classes and WireframeComponents available in Flash.
    2)&3) could be solved by adding a new Symbols for the new Wireframe Components. The Button symbol already has a template with 4 states. Why not update Flash Professional to visually represent more Classes and Component Classes, instead of just the MovieClip Class and the Button Class. Even better, maybe there could be a way to make a template for creating our own wireframe components. Just assign a base class for the wireframe class and a base template, and the introspection view will display accordingly.
    States of the component would be listed out at the top instead of frames,  just like the Button Symbol used to be.  Different layers could be designated for specific graphical parts of the component. The designer would be free to add their own layers if necessary.
    In previous versions of Flash, everything was a movieclip and everthing had a timeline. Thats not the case anymore. The timeline is for intropecting MovieClips, but this view could be different when intropsecting different types of symbols such as Sprites, Buttons, Wireframe Components, and even Custom Wireframe Components(extensible).
    These new Symbols and also Sprites could export to FXG very easily.
    The multi screen applications in 4) look pretty similar to the Slide Presentation Template. Why not just make a new MultiScreen App Template and youre done. these MultiScreenApp Templates could exporte Screens to FXG or export the whole Template to a FXP.
    I applaud the work done on the new wireframe components and FXG. Great Job!
    But, just cant understand why you cant update Flash Professional with new types of Symbols(Sprites, new Buttons and wireframe Component Classes) and a new MultiScreen App Template.
    Flash Professional needs to keep up with AS3 and also needs to export FXG and FXP.
    Why doesnt Adobe focus on on this rather than create a new Tool? These features need to be added to Flash Professional anyway.
    Isnt there more of a disadvantage to having 2  tools for designers that do the same thing?
    I'm sure this issue has been debated before. Can anyone point to me links that have the arguments for creating a separate tool instead of updating?
    Has anyone ever suggested that Flash Professional should keep up with AS3?
    Has anyone ever suggested making Sprites a new symbol in Flash Professional so that it could be more seamless with Photoshop?
    Has anyone ever suggested make Wireframe components in Flash Professional like the Button Symbol in Flash Professional?
    Has anyone ever suggested updating Flash Professional so that it would export FXG and FXP?
    What is your opinion on this?
    -thomasglyn

    @Ross
    Thanks for your explanation. I appreciate your feedback.
    I'm glad we agree that ideally there should be 2 main tools, one for designers(Flash Professional) and one for programming(Flash Builder).
    You had mentioned "But, that assumes this is possible.  As it currently stands it is not" and the reason being "Catalyst, and Builder both use a completely different framework from Professional. The component architecture is drastically different, not to mention the entire backend of the software.".
    You could also argue that, the reasons to make a separate flex component creation tool like Flash Catalyst assumes that updating Flash Professional CS4 is NOT possible. But is the statement about the framework being entirely different really true?
    Well, that depends on what you mean by the term "framework".
    Framework can refer to 3 things in this case.
    1) the component framework
    2) the code framework(AS3)
    3) the flex framework (mxml, fxg)
    If you are refering to #1 then you're right, because Adobe hasnt updated the flash component framework in Flash Professional from Flex3 Halo components to Flex4 Spark components.
    Flash components have gone through many iterations, and the switch from AS2 to AS3 was probably more profound than the new wireless component structure(Spark). And now that we have AS3, isnt the only difficulty creating a intuitive UI in Flash Professional, and adding export features?
    If you are refering to #2 then I think you're incorrect, because Flash Professional has been updated to AS3 and Flex4 Spark components use AS3. I would totally agree with you, if CS4 did not go through all of the trouble updating to AS3.
    If you are refering to #3 then you're right, because Flash Professional doesnt export mxml, fxg, or fxp, but with a little creativity, it would probably be possible to allow such an export. Adding FXG/FXP export features could be solved by creating a new type of project file.  Adobe did this for AS2, AS3, flash lite, etc. Why cant they just make a new AS3/FXG file that only allows you to build fxg/fxp exportable assets.
    Why cant Adobe make a Sprite class the default document class for AS3/FXG projects and when some adds a movie clip asset, export movie clips as swfs or swcs?
    So to be honest, after opening up Flash Catalyst again and looking at it again, I almost get the feeling that its just a Flash Component creation tool with a Photoshop UI, for the new AS3/Flex 4 components(Spark components) that Adobe just refuses to add to CS4.  CS4 uses AS3 and Spark components use AS3.  CS4 needs to be a visual design tool for all the classes in AS3(as much as possible).
    Perhaps Adobe originally meant to name this product...
    ADOBE FLASH COMPONENTS
    Or maybe Adobe Flex Components(but thats no longer true, because Flex 4 will be Flash Builder).
    In regard to "reinventing the wheel". Flash components have been reinvented several times, and I totally agree with you that this is important to "reinvent" components to keep up with new techiques as2,as3,fxg.  You are right, this is a positive thing. However in this case, I am using "reinvent in a negative sense.
    So maybe I shouldnt say "reinvent the wheel", but "reinvent the car".
    Perhaps Adobe is trying to create a wheel for the upperclass RIA programmer Flex car, and isnt making it compatible common designer/programmer Flash car. And when they finished the wheel, and they decided just to make a Segway for the Designers and Flash people to ride, that uses this new wheel.
    You might argue that its more approachable for designers, and designers feel at home because the ui is similar. This is precisely why Adobe should hurry up and finish updating the ui of the Flash Professional IDE so that its ui is more compatable with Photoshop and Illustrator. The fact that Photoshop and Illustrator is the standard for designers are perhaps one of Adobe's greatest advantages.  They could make the designers happy if they just make a Sprite inspector view with layers like photoshop in Flash Professional, instead of using the old "everything
    is a movieclip" paridgim. Flash Professional has already upgraded to AS3 and in AS3 everything isnt a movieclip.  So it would be nice if they could make views for some of the new classes and wireframe components.
    This is the age old debate, update or start from scratch.  I guess I'm saying that I think the hard work of updating to AS3 has already been done, and its just plain wierd that Adobe decides to build a separte tool for components, when they use the same AS3 code base.
    Its just insanely exciting to just think about what could have been if Flash updated and brought on more Designers and at the same time linked in the Flex community. Thats what Flash has always been about! The meeting point between Designers and Programmers.
    To go this far and quit just because of components just leaves me blue.
    It seems that many projects stop at 80% complete and if the developers just spent the extra 20% on fine tuning things then they would have a very high quality product. In this case the remaining 20% is  components, ui, and export. I understand that there are probably many things I dont understand, especially when you through in marketing, and product life cycle.
    But I think Adobe could have done it, if they put as much effort into it as they did to make an entirely new product.
    Maybe we should make some noise before its too late.
    I'm still interested in seeing more links that show the logic behind the initial discussions of this debate when it was first decided.
    pls keep me posted.
    @nwfa & macsavers
    Yes, youre right. it does seem to be their plan.  I just hope they are just testing the waters.  Perhaps after they do the initial selling of Flash Compenents, then maybe they could offer a free update to CS4.
    As I mentioned above, the main reason designers feel at home is because of the UI of Flash Catalyst. UI's can be updated, and I believe Flash Professional can and should update itsui for the reasons I mentioned above.

  • HT4972 Why I can't update my iPad to the iOS 7.0 when I go to general there's no section for update

    Why I can't update my iPad to the iOS 7.0 when I go to general there's no section for update.please help

    If you have an iPad 1G you cannot run iOS 7. If you are currently using iOS 4.x.x then you cannot upgrade OTA. Instead do this:
    Give this a try:
    Download Apple – iTunes 11.1. Connect your device to your computer and open iTunes. Select your device under the Devices heading in the iTunes' sidebar. Click on the Summary tab in iTunes' main window. Click on the Update button.

  • Why can't I update LR cc

    why can't I update LR cc, "there was a problem updating your lightroom cc"  error code uu4m1l210

    The CC system is farked.  If you update LR from within LR, you take it out of CC's cocoon and it doesn't recognize that LR is even installed.  I installed 5.3 as an update within LR.  LR disappeared from my installed apps in the CC list, and with 5.4 it showed up as an "install" option.  I did that instead of upgrading withing LR, and everything went well.  CC now lists LR as installed.

  • Playbook reinstalled the OS instead of updated it

    Hi, I've been having trouble connecting my playbook to my PC ever since I installed Windows 8. When I ran the Blackberry desktop software it gave me the option to update the Playbook OS. I did this but the install froze on me so after a few hours I unplugged the playbook. However -- and here's what I need help with -- when I turned on my playbook again it acted as though it was the first time I used it. Evidently it seems to have totally reinstalled the OS (version 2.1.0.1753) instead of updating it ---- meaning that I have lost my files and apps. Is there any way to access the information that I have lost? And why would this have happened in the first place?

    unless you have a backup the info is lost
    how did it happen, there is a question that askes about updating it when not connected and usualyl gives warning all will be erased and maybe you didnt see that pert and just choose next
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Why do the mac updates take a ridiculously long time

    why do the mac updates take a ridiculously long time? 10 hours? this is ridiculous - my ISP is 40mbps

    Which updates were you trying to get? If you are going to a very busy web site or server, the connections could be extremely slow. But to wait so long invites troubles.
    If the machine is terribly slow, that should be an indication some maintenance or repair may be needed first. Some keyboard shortcuts can be used to check and attempt repair, and the problem likely is in the Mac.
    Everything from the amount of RAM installed, to the total capacity of the HDD (or SSD) vs free or unused space on the drive, is important to the function of the OS X. Or there may be an issue, if the OS X checks out OK, in the internet connection. If you use wireless mostly, check the connections by wire instead.
    Try to not get into a position where you end up using 'force quit' if the computer appears to freeze up. In the process of an update or upgrade, that's almost never a positive outcome.
    Good luck & happy computing!

  • CC keeps showing INSTALL instead of UPDATE - Mac

    I need to know why Creative Suite CC Adobe Download Manager says 'install' for apps that are already installed instead of 'update'.
    I have all the programs I need installed in my Adobe CC folder and have been using them for a couple of weeks. But the CC Manager says to 'install' instead of 'update'. I have searched forums for ages and not found an answer. Does anyone know? Thank you.
    (I have tried waiting over an hour on Live Chat but constantly get 'your estimated wait time is 2 minutes and 19 seconds or longer.)

    I ended up clicking the INSTALL on each and they re-installed. Have no idea why. But they are now all up-to-date.

  • Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

    Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

    You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
    (118441)

  • I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version.  How do I update my PHONE and why is an itunes update being confused for my iphone?

    I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version.  How do I update my PHONE and why is an itunes update being confused for my iphone?

    You need iTunes 10.0 or greater to update your phone...iTunes isn't confused at all. If you're on a Mac, you'll need OS X 10.5.8 or greater to update iTunes to 10.0 or greater.

  • TS3694 Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out.

    Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out. Make sure your network settings are correct and your network connection is active. or try again later." and next to the file it has err = -3259. I have tried this 17 times and it won't work. My iTunes is completely up to date. I have made sure that my connection is fine and I have tried turning my firewall off with no avail. This has happened to me before but usually the update will go through after 2-3 tries, never to this extent. I don't know what to do. Help!

    Error -3259 is a network timeout error, usually. This article might help:
    http://support.apple.com/kb/TS2799

  • Why does "Check for Updates..." show that there are no updates available while I'm using Firefox 3.6.18 and latest version is 5.0.1?

    First and foremost, I'd like to clarify that I hardly have any technical knowledge. So pardon me if this comes across as a silly question to the professionals. Here are the details pertaining to this problem as per the best of my limited knowledge:
    I'm currently using Mozilla Firefox 3.6.18; previously it was 3.6.13. It was updated to 3.6.13 from 3.6.9 after I clicked on Check for Updates... and it told me that it'd be done when I reboot my system. When I restarted my PC, I was surprised to find that it was downloading the version 3.6.18. I didn't know how much it'd progressed in the process, so I let it finish it. After that, I disabled the option that enables it to download and update on its own, and turned it off. Next time when I started it, it was 3.6.18, but wasn't updating on its own anymore.
    Now I wanna update it directly to the latest version 5.0.1. But when I leave it to "'''Automatically download and install the update'''" option under Tools>Options>Advanced>Update, it downloads and updates the versions as per their release order. So if I leave it to it, then when I start it next time, it'll start downloading the version next to 3.6.18 and update to it instead of updating directly to 5.0.1. It'll keep doing so until it reaches there. For reasons of my own, I don't like that. So I '''unchecked '''the "Automatically download and install the update" option and chose the "'''Ask me what I want to do'''" option (so that it doesn't keep repeating the "downloading and updating" process on its own every time I start my PC). Then I went to Firefox site and thought of downloading and updating to the latest version on my own. But then I was informed that if I do so, '''I'll get the latest version, but I'll lose all my saved bookmarks unless I follow some hectic procedure to save them and load them again after installing the latest version of Firefox'''. I don't want to let that happen either. So, can anyone suggest me a way out of this situation without losing my bookmarks?
    Almost forgot. I tried several times by going to '''Help>Check For Updates...''', but every time it returned the same result: "There are no updates available. Firefox will check periodically for updates." How come no update is available while the version I'm using is 3.6.18 and the latest version is 5.0.1? In short, '''Check for Updates...''' didn't help either. (Even when I updated it last time, shouldn't it have updated itself from version 3.6.13 to 5.0.1 directly?)
    So, can anyone suggest a way by which I won't lose my bookmarks and would be able to update to the latest version directly too? An answer that wouldn't involve removing the current version and installing the latest one, but directly update to it (it's okay if it needs downloading) would be more welcome. I know that the bookmarks can be saved in a file and all, but I'd like to know if it's possible as it happened for my current version from previous version. (It downloaded and updated itself on its own, disturbing nothing, not even logged me out of certain accounts where I stay logged in. The only problem there was that it wasn't updating directly to the latest version.)
    I hope the aforementioned details make sense and are helpful enough for others to help me. Thanks.

    Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
    BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
    Thanks for your help; hope this wasn't extremely long.

  • Error when a try to update a xmltype view thru a trigger instead of update

    <PERSON>
    <ID>4</ID>
    <FIRSTNAME>Frédéric</FIRSTNAME>
    <LASTNAME>Philippekin</LASTNAME>
    <SEX>M</SEX>
    <WEIGHT>75</WEIGHT>
    <HEIGHT>175</HEIGHT>
    </PERSON>
    CREATE OR REPLACE VIEW personne_oracle OF XMLType
    XMLSCHEMA "personOracle.xsd" ELEMENT "PERSON"
    WITH OBJECT ID (EXTRACT(sys_nc_rowinfo$, '/PERSON/ID').getNumberVal())
    AS SELECT XMLELEMENT("PERSON",
              XMLFOREST( Id,
    FirstName,
    LastName,
    Sex,
    Weight,
              Height)
    ) AS Valeur     
    FROM Person;
    CREATE OR REPLACE TRIGGER u_personne_oracle_tr
    INSTEAD OF UPDATE on personne_oracle
    BEGIN
    UPDATE Person SET
    Person.FirstName = extractvalue(:new.sys_nc_rowinfo$,'/PERSON/FIRSTNAME/text()'),
    Person.LastName = extractvalue(:new.sys_nc_rowinfo$,'/PERSON/LASTNAME/text()'),
    Person.Weight = extractvalue(:new.sys_nc_rowinfo$,'/PERSON/WEIGHT/text()'),
    Person.Height = extractvalue(:new.sys_nc_rowinfo$,'/PERSON/HEIGHT/text()')
    WHERE Person.Id = extractvalue(:new.sys_nc_rowinfo$,'/PERSON/ID');
    END;
    UPDATE personne_oracle x
    SET value(x) = updateXML(value(x), '/PERSON/FIRSTNAME/text()','Fred')
    WHERE extractValue(value(x), '/PERSON/ID') = 4;
    ORA-24358: OCIBindObject not invoked for a Object type or Reference
    please help me !

    What happens if you move the view to the remote db?
    and create a synonym for the view on the local?it doesn't work !
    >
    alternatively,
    what happens if you modify from person@oraclelink in
    the create or replace view personne_oracle?it doesn't work !
    The problem is the dblink ! Without it it's work !
    thx for your answer.

Maybe you are looking for