Why Dynamic Link to Encore when CUDA doesn't help Encore?

Ok, so I just finished cutting together a 90 minute video and used Dynamic Link to bring it to Encore. My source files were AVCHD and HDV mixed, so Encore had to transcode them. I attempted to do a transcode before burning, and got all the way to 99% in the transcode when I got an error message saying that I couldn't transcode the file because it was open in another program (I had closed PPro, but apparently it was still open?). Anyway, I tried hitting "build" and got the same error, again at 99%. So I went back to PPro and used it to export an mpeg2-dvd file which I then imported into Encore and burned to DVD.
Now, though I would appreciate some suggestions as to the source of my error when transcoding with Dynamic Link, that's not the root of my post... here it is: I'm not likely to use Dynamic Link again when Encore's (failed) transcode took nearly two hours for my 90 minute video, while doing a direct export from Premiere took only 40 minutes. I can only assume that the difference in time is because PPro is a) 64 bit, and b) can take advantage of the CUDA (I did all my CC and transitions using CUDA effects). Until Encore hits 64 bit and can take advantage of CUDA, I doubt I'll be using Dynamic Link again... anyone have any insight or comments?

I'm not sure that the information is correct. Test project with dynamic link from PR to EN. I right-clicked and picked transcode now. Using windows task manager processes, the only programs using cpu are encore (60-80%) and premiere (10-20%). I happened to have AME open, but it was using zero.
I do not have a CUDA card, but I don't think it matters for this test.
I thought we had been told (probably in CS3 or CS4) that Encore was using ame, but this doesn't look like it. What engine is actually doing the EN transcoding? It certainly appeared to be running internally to Encore. Is there any difference in how Encore is transcoding between using "transcode now" versus transcoding through "build"?

Similar Messages

Why is my ipod saying 'iPod is disabled, connect to itunes' when i try connecting it to itunes, it comes up with this pop up saying it couldn't take my ipod because it has a passcode on it?, why should i connect it when it doesn't even take it!!!

Why is my ipod saying 'iPod disabled, connect to itunes' when i try connecting it to itunes, it comes up with this pop up saying it couldn't take my ipod because theres a passcode on it?, why should i connect it when it doesn't even take it!!!

Follow ALL the Steps in this article > http://support.apple.com/kb/HT1808
You may have to try it more than once...

I tried to uninstall itunes and appropriate apple products on my computer. It will not let me uninstall message I keep getting is"THE PROCEDURE ENTRY POINT_OBJC_INIT_IMAGE COULD NOT BE LOCATED IN THE DYNAMIC LINK LIBRARY OBJ.DLL. CAN ANYONE HELP?

I tried to update Itunes on my desktop computer and for some reason it did not work properly. I am receiving the following message:
"the procedure entry point_objec_ init_image could not be locaed in the dynamic link library objc.dll. can you help?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Why does RoboHelp 8 crash when compiling merged HTML help after deleting a child project in TOC

Why does RoboHelp 8 crash when compiling merged HTML help after deleting a child project in TOC? I would be grateful for any assistance.
Here's the situation:
-- I recently upgraded from RoboHelp X5 to RoboHelp 8. I upgraded my projects to RoboHelp 8 projects.
-- One large help system I manage is built such that there is one master project and about 25 child projects. Each of these is its own item in the master project TOC.
-- In RoboHelp X5 I never had any trouble deleting these.
-- However now in RoboHelp 8, whenever I delete one (by opening TOC pod, right-clicking on item in question, and clicking Delete), and proceed to "Generate Primary Layout" (MS HTML Help), the generation/compilation process proceeds as far as "Generating full-text search data" and then the whole program crashes!
Am I doing something wrong? Is there a bug in the software? I have installed patches 8.0.1 and 8.0.2.
Once again, I thank you in advance for any pointers.
Matthew Keranen
Jamsa, Finland

That does help - thanks a lot.
Wayne Kroger
State Street Corporation
SQA-Princeton
(609) 580-6264
mail to: [email protected]
The information contained in this email and any attachments have been classified as limited access and/or privileged State Street information/communication and is intended solely for the use of the named addressee(s). If you are not an intended recipient or a person responsible for delivery to an intended recipient, please notify the author and destroy this email. Any unauthorized copying, disclosure, retention or distribution of the material in this email is strictly forbidden.

Adobe Dynamic Link or Export from Premiere and load into Encore?

Hi
I'm making some tests about authoring DVDs and Blu-Rays from Encore CS6. My video editions are made in Adobe Premiere Pro CS6.
Looks like I have 2 ways to send contents from Premiere Pro to Encore.
1) I can set all my editions in Premiere Pro, then Export the entire timeline to a MPEG-2 DVD or MPEG-2 BLU-Ray file, then start a new Encore project and import this video file as a timeline.
2) I can finish my editions in Premiere Pro, then use the Adobe Dynamic Link > Send to Encore options. So, it's not necessary to export files, since the task of transcoding is an Encore's task.
Question is: Any advantage of using way 1 or 2??? Thinking about speed to finish the job, is one way better than other?
What do you use do choose?
Thank you for these tips
Gustavo.

Hi Stanley
Thank you very much for your tips. Just one thing:
In Premiere we can choose, for Blu-Rays, the MPEG-2 or H.264 codecs. You mentioned the H.264 Bly-Ray choice.
Any advantage regarding the H.264 instead of the own MPEG-2 coded?
Best Regards and thank you very much again.
Gustavo.

In cs6, my preview files are not saving on my Dynamic Link AE comps when i reopen the project

i cant figure out the life of me what seems to be the problem
This has been going on for a long time for me, dont know if anybody else has this problem, but for me, when i render out the whole entire sequence, everthing has the green bar, i save, i quit and reopen, the red bar appears and i have to re render all the Dynamic link comps again! its really annoying, i feel like its just collecting more space every time i do this
Any fix for this, and here are my specs
Macbook Pro early 2011
Processor 2.2 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6750M 1024 MB
and im running mountain lion

It happens sometimes that preview files get lost. There's no definitive fix yet, but you could try this:
http://forums.adobe.com/thread/1144624?tstart=30

When attempting to open iTunes: 'the procedure entry point JSObjectDeleteProperty could not be located in the dynamic link library WebKit.dll'....help!

....please help. any suggestions???
never seen this screen before, computer all updated and security proteted etc.etc.

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

Dynamic link premiere to after effects doesn't send clips to after effects timeline

This option has always worked for me but al of the sudden it stopped.
I tried to restart after effects and premiere but that didn't work neither did restarting my computer.
HELP ME

You can export a Premiere Pro project from After Effects, but the results are usually pretty messy. Because of the different way in which tracks in Premiere and layers in After Effects work (ie. you can have multiple clips on a single track in PPro, but only one clip/item per layer in AE), you can end up with an unmanageable number of tracks in Premiere. Still, it's an option to explore.
Note that AE-only effects won't come through to Premiere, and certain project items will be recreated in a way you might not expect.

How to handle dynamically created row values when get upadted "please help"

Hi,
In my application I have requirement to display the data for specific date when user clicks on viewData. (it shows the entries for that specific days . There may be number of entries). For showing this I have created Value Object and I am setting all the entries for particular selection date to value object and (simply one day entry indicates one instance of my VO if there are 10 entries then I am creating 10 instances of VO and passing this to the actionfor)
On my JSP page I am displaying that data by using <logic:iterate>
<logic:iterate id=�myid� name =�nameofform� property =�Listproperty�>
<tr>
<td><input type=�text� property=�abc� value=<bean:write name=�myid� property=�propertyinVO�></td>
// and same for other other values as well
�.
</logic:itearte>
Now I have requirement that if user edit these entries and click on SAVEDATA the updated values should go to the DB.
As I don�t have property mapped separately I am not able to take updated values of those as they are getting dynamically generated
Is there is any way by which I can get these updated values.
I am in badly need of that . Urgent help will highly appreciated.
Thanks
Sheena

Hi, first off, no need to determine what has been checked or not. If the checkbox is checked, on the post, the value will be submitted as part of the request. If the checkbox is not checked, it will not be submitted (it's value will be null). Depending on what you need, I have approached this a number of different ways. One way is to name all checkboxes the same name. If you need to distinguish between two rows in the form, then in the value field for the checkbox, use some type of distinguishing factor, for example,
<input type=checkbox name=chkName value="1:abc">
<input type=checkbox name=chkName value="1:def">
Now, you only have to make one call on the Servlet/JSP receiving the form post, request.getParameterValues("chkName") which will return an array of the non-null Strings that were checked.

I can't find the adobe dynamic link to encore in premiere pro...?

New to encore and dynamic link... I'm running Premiere Pro CC and Encore CS6. When I go to send my sequence to Encore (File>Adobe Dynamic Link>..), there is no "Send to Encore" like what I've heard in seen in the tutorials... any ideas?
I've also tried to dynamic link from encore to premiere pro, but it never loads the sequence.

a workaround for the Cloud http://blogs.adobe.com/davtechtable/
-http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
-http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/

No video of Dynamically Linked asset from AE to Encore

Hi Folks,
I’m working with Adobe CS5 Collection Premium and I experience the following problem with bringing animate assets through a dynamic link into my encore project. I’ll try to explain briefly the issue:
I’m building a blu-ray disc in Encore, which has animated transitions between the menus. These transitions are created in After Effects and brought into Encore via a dynamic link. All the dynamically linked transitions are output correctly in the final disc with the exception of the first-play animated introduction (created in AE) to my main menu – the sound is there but there is no video. There are no issues during the preview of the project in Encore - everything plays just fine and all dynamic links to my animated transitions play ok in Encore. The problem occurs after burning the BD-disc - the video is missing from the intro scene.
Has anybody had a similar issue with dynamically linked assets to Encore projects? I tried bringing the same animated asset via dynamic link with After Effects CS5 and Premiere Pro CS5. The result is the same – the first scene lacks the video. Could it be because my Encore project settings are 20mbps, which causes the blu-ray player to struggle with the first-play animated menu?
Any solutions?

The composition background is transparent. It has per se no color and does not react to blendmodes and such. It's imaginable that Encore resets it to black for whatever reason (wouldn't know, as I design my menus always with full frame backgrounds to begin with). Still, I would consider it a bug regardless, so please fiel away:
http:www.adobe.com/go/wish
Mylenium

Please help, I cannot get play menu to work after using dynamic link.

Ok. So I sent a video from premiere pro to encore using dynamic link. Then I created a menu in encore and dragged video to play button I created for the dvd. However, when I burn the dvd, the menu is not a part of the DVD. I do not know why this happens when I use a dynamic linked video. It does not happen when I use other videos. Please help. Thanks Matt

You need to set the menu to be first play.
If you create a timeline before you add a menu, the timeline becomes first play. If you set the end action of the timeline to the menu, it will eventually get there, but that does not appear to be what you want.

Rendering from Premiere Pro Dynamic Link vs After Effects = fast vs slow?

So I'm doing graphics for a show using a fake 3D look in Adobe After Effects CC 2014.1. In segment 1 there are about 30 fonts that display for about 3-4 seconds each. Technically it's just a bunch of 2D layers of text, not a real tricky or intensive thing.
In my Premiere timeline, things render pretty quickly in the sequence. The show is composed of RED R3D 6K files, AJA KiPro quicktime files and some AVCHD stuff. Sequence timeline is 1080i29.97 for broadcast delivery. The sequence is rendering out to ProRes422 HQ. With no graphics, even the RED 6K files render out snappy. So I've brought these new graphics in as a Dynamic Link file. When I try to render out the graphics things get SUPER slow. Inordinately so. I don't get it. I thought the new "Render and Replace" would speed things up (great feature) however that seems to make things just as slow. So now I'm rendering out of After Effects the old fashioned way (each font is a 10 second file or so) with an alpha channel. I chose the 8-bit Cineform codec w/ alpha channel. Things rendered out, as expected, very quickly. A few minutes and all 42 fonts I built were done.
So what I don't get is why render and replace is so much slower than manually rendering straight out from After Effects CC 2014.1. Based on the time stamps from a "render and replace" process I did overnight - it took about 6 hours to render out a handful of graphics. I rendered out twice the amount straight from After Effects CC 2014.1 this morning in like 5-10 minutes. Isn't render & replace basically just rendering stuff out straight from After Effects (or AME) in the background and then just popping it in your timeline? If that's what is supposed to be happening, I don't understand the discrepancy in time. I'll bring the rendered out files into Premiere and see how quickly that video renders over the original video.
I just wanted to throw this out there to see if I'm missing some obvious thing or if this is as expected behavior.
#editorproblems #deliverydeadline

What, exact, version of CC 2014 do you have?
How long have you used AE?
When did this problem start?
Have you tried rebooting your machine?

Adobe Dynamic Link will not work - Premiere Pro CS4 to After Effects CS4

Hello,
I am edited a video with a deadline, I'm importing a sequence from Premiere Pro CS4 to After Effects and making edits in After Effects. I'm able to import the Premiere Pro sequence into After Effects using Dynamic Link, but I go back to Premiere Pro and nothing has changed. Then I have to export the 21 minute long video in After Effects and that takes about 12 hours, that I can't afford. I don't know what I'm doing wrong, before I imported the timeline into AE, while I was in Premiere Pro I right clicked it and selected -Edit original. It took me to the .mov that I imported- since it's a redo. I learned how to use Dynamic Link from this tutorial-
http://tv.adobe.com/watch/learn-cs4-production-premium/using-dynamic-link/
At first when Dynamic link didn't work I thought it was because I was cutting the imported Sequence from Premiere Pro in After Effects becasue I was motion tracking. When you import a Premier Pro sequence can you cut it into individual layers in After Effects?

I'm importing a sequence from Premiere Pro CS4 to After Effects
That doesn't create the type of Link you want here. In this case, changes made to PP would show up in AE. You want the reverse. (And you can only go one way, not both.)
http://help.adobe.com/en_US/PremierePro/4.0/WS725e431141e7ba651172e081238226cdf5-8000.html

Dynamic Link... My Question Disappeared?

I tried to import a video to Photoshop CS6 Extended, in order to export it as an animated gif.
I posted a question about it here, it appeared in 'trending' and then disappeared ! Did a moderator move it?
My question was... when I tried to import I got a message error to say "Dynamic Link missing...'
Can anyone help?

Your question was moved over to the Photoshop forum here http://forums.adobe.com/message/4413189#4413189.
You can always find all of your posts via Your Stuff > Discussions from the menu. So in your case http://forums.adobe.com/people/KieranBrennanDublin?view=discussions.

Why Dynamic Link to Encore when CUDA doesn't help Encore?

Similar Messages

Maybe you are looking for