Why endnotes are far of control in ID4?

I designed a publication with endnotes.
Lately the writer forgot to insert a note (footnote) but ID4-6.04 Mac can't renumber , if i try using footnotes options menu ID just ignore it.
Id insert the new note but not in a sequence. You may choose any number, repeated if you like, but the sequence is lost.
Endnootes have lost all the properties usually found in footnotes. Id does not understand endnotes... Well, that is my presumption.
As I have 200 endnotes, renumber half of the them in the text is just a waste of time...(problem is note 99).
(Incredibly, the list of endnotes at the end of the book I formatted them numbered list and inserting or deleting are very easy...)
If controls are not available may be an script exists?
Thanks.

mariana pineda wrote:
I designed a publication with endnotes.
Lately the writer forgot to insert a note (footnote) but ID4-6.04 Mac can't renumber , if i try using footnotes options menu ID just ignore it.
Id insert the new note but not in a sequence. You may choose any number, repeated if you like, but the sequence is lost.
Endnootes have lost all the properties usually found in footnotes. Id does not understand endnotes... Well, that is my presumption.
As I have 200 endnotes, renumber half of the them in the text is just a waste of time...(problem is note 99).
(Incredibly, the list of endnotes at the end of the book I formatted them numbered list and inserting or deleting are very easy...)
If controls are not available may be an script exists?
Thanks.
This link has some useful information on using cross-references for endnotes in InDesign CS4:
http://blogs.adobe.com/indesigndocs/2009/03/endnotes_in_indesign_cs4.html
(Please note ID CS4 is the correct name; you referred to ID4, which is an older version. They are not the same.)
You can also enter a formal request for endnotes here:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Similar Messages

Why we are not using "Message Control" for Master data ?

Hi friends,
We are using Message control as output determination for Transactional data, what is the main reason for not using the msg control for Master data.Please explain with details...
I am very thankful to them...
Thanks and Regards.
Naveen Kumar. Chamala

Hi Naveen,
 Listing down those I know -
 1. Master data is expected to be changed/created less frequestly.
 2. Transactional data is expected to be chnaged/created more frequestly.
 3. Transactions to create/change/display master data do no have message control integration, since you are not supposed to print/fax/mail master data to your partners.
 4. Distribution of master data in generally supposed to happen within Enterprise boundry and typically you will have one central server maintaining master data which will be distributed to multiple downstream operation system (Some thing where MDM fits). So ideally when distributing master data using ALE you will be sending it to multiple systems.
 5. Distributing transactional data PO/SO etc is same as sending fax/print which fits with the requirement of message control.
Hope this helps,
Regards,
Sanjeev

To transfer the data Cross the systems why we are not using BAPI Method?

Hello All,
To transfer the data Cross the systems why we are not using BAPI Method? why we are using only ALE/IDoc's?

Hi Naveen,
   Listing down those I know -
   1. Master data is expected to be changed/created less frequestly.
   2. Transactional data is expected to be chnaged/created more frequestly.
   3. Transactions to create/change/display master data do no have message control integration, since you are not supposed to print/fax/mail master data to your partners.
   4. Distribution of master data in generally supposed to happen within Enterprise boundry and typically you will have one central server maintaining master data which will be distributed to multiple downstream operation system (Some thing where MDM fits). So ideally when distributing master data using ALE you will be sending it to multiple systems.
   5. Distributing transactional data PO/SO etc is same as sending fax/print which fits with the requirement of message control.
Hope this helps,
Regards,
Sanjeev

Why there are big differences in the prices of spare parts (hinge) ..?? particular egypt ibm

I have Lenovo 3000 N200 0769 with problem in left hinge lcd , the number of it i think (41W5214) 15.4 lcd.
lenove egypt (IBM) was told to me cost 100 $ but in Many sites (hinge) cost betwen 19 $ , 30$ , 80 $
i want to understand why there are a big difference betwen prices , and why the ibm egypt is Highest price...!!!
i was asked ibm egypt can replace (Repair) it , if I bought one by my self from internet , but refuse my Request and told to me you must bought it from egypt ibm !!!
thank you

it`s hinge!!!! just Metal hinge !!??
not hardware like ram or H.d or vga.....etc
original or not it`s nothing important like other hardware must be original
if you see the hinge pic (41W5214) you will know what i mean about 80$ differences in the prices
and
why lenovo Egypt refuse my Request to replace (Repair) it , if I bought one by my self ??
the answer is Forced to purchase an Expensive one from lenovo Egypt "kind of business" and customers not important to agree or disagree
I hope Lenovo tighten the control of the Egypt Branch, with some simplification
Message Edited by sadzaglol on 03-07-2009 06:40 AM
I hope Lenovo tighten the control of the Egypt Branch, with some simplification
Message Edited by sadzaglol on 03-07-2009 06:41 AM

Why we are making a variable as final in method inner class ?

Why we are making the variable as final (method inner class) while we are accessing the method variable in inner class ?
regards,
namanc

As far as I can tell, the only reason is to protect the programmer: when the inner class instance is constructed, it is given the then-current value of the variable. If the variable (or method parameter) later changes, the value held by the inner class would not. By making the variable final, the programmer doesn't have to worry about them staying in sync.
Here's some code to ponder:
public class InnerExample
 void printMe( final int x )
 Runnable runMe = new Runnable()
 public void run()
 System.out.println(x);
 (new Thread(runMe)).start();
}When compiled with the Sun JDK 1.4.2, you get this bytecode:
void printMe(int);
Code:
 0: new #2; //class InnerExample$1
 3: dup
 4: aload_0
 5: iload_1
 6: invokespecial #3; //Method InnerExample$1."<init>":(LInnerExample;I)V
 9: astore_2
 10: new #4; //class Thread
 13: dup
 14: aload_2
 15: invokespecial #5; //Method java/lang/Thread."<init>":(Ljava/lang/Runnable;)V
 18: invokevirtual #6; //Method java/lang/Thread.start:()V
 21: returnAt line (byte) 5, it loads the passed value onto the stack; at line 6, it invokes the inner class constructor (which is created by the compiler). Nothing in this sequence of code would prevent use of a non-final variable.

For Enjoy Transactions why we are using BAPI only.

Hi All,
(already searched the forum for this one)
Can anyone please explain me or send related links--->
1) Why we are calling me21n as ENJOY transaction.
2) What are ENJOY Transactions.
3) Why we have to use BAPI ony
to update ENJOY Transactions instead of BDC.
regards,
phaneendra p.

These new transactions should make life for the end user a bit easier, since SAP transactions not always accelerate in design, logic, etc. That's why SAP has introduced these new transactions which in the end, will have the same result. In these socalled 'Enjoy' transactions, SAP started using these 'new' enjoy sap controls like ALV grid, text editor, HTML viewer etc.
For 'updating' Enjoy transaction (BTW: You are NOT updating the transactions, but rather the purchase order or whatever) you will have to use BAPI's (or FM for that matter) in stead of BDC since Enjoy Controls work with a different framework in which you can not call a certain screen and field. Like in an ALV grid, not every field has it's own screen field name. So you cannot use them in BDC.
Hope this makes any sense, otherwise search the forum. There have been some similar questions in the past as I can remember. Especially why you can not use BDC with enjoy sap transactions.

Why is my itunes video controls grayed out on mac?

why is my itunes video controls grayed out on mac?
How do I fix this problem so I can watch purchased videos ?

In many cases, they are related, I have many users who have reported the repair of QuickTime fixed the issue.
See if these articles will help:
iTunes for Windows plays video files without any audio
http://support.apple.com/kb/TS1696
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718

Why does Adobe Acrobat now control the photos on my pc?

Why does Adobe Acrobat now control the photos on my pc?

Hi,
Thank you for your reply.
After I downloaded Acrobat, Adobe Reader tries to control viewing of my photos. When I plug my digital camera into the PC, all the files are labeled “PDF”; the files still have the .jpg extension, though. For photos on my PC, when I try to open them, Adobe reader insists on opening them, but it can’t, and I get the message:
“Adobe Reader could not open photo.jpg because it is either not a supported file type or because the file has been damaged”
I attached several photos to an e-mail that I sent after downloading Acrobat, and I could not open the photos before sending the e-mail (in order to verify that they were the correct photos before I sent the e-mail). Adobe Reader was my only option when I clicked “open” to view a photo, and it would not open the photo.
I assume that I did something during the Acrobat download process that has caused this situation. My plan is to uninstall Acrobat and then re-install it and this will hopefully remove this situation.
Any suggestions you have about this situation would be greatly appreciated.
Doug McLean
469-766-9679

Why we are going for OOALV insted of function modules ?

Why we are going for OOALV insted of function modules. ?
Its very easy to use function modules directly compared to OOALV.
IS there any particular reasons or any advantanges of using ooalv
Thanks & regards,
hari priya

Hi
a) from abap coding point of view,
alv list is done with Function modules,
alv gris can also be done with FM,
but can also be done using OO concepts.
b) Alv grid (using oo concept) requires
designing the screen layout .
Hence, in one screen, we can show more
then one alv grid
(we cannot show more than
one alv list on one screen)
c) ALV grid uses ActiveX controls
present on the Presentation Server.
Hence, it consumes More Memory
on the presentation server.
d) ALV LIST is Display Only.
Whereas
ALV Grid Can Be made EDITABLE for entry purpose.
e) In alv grid, these options are possible,
but not in alv list.
without horizontal lines
without vertical lines
without cell merging during sorts
display total lines above the entries
ALV LIST Can be coded using only FMs
ALV GRID Can be coded using FMs and object oriented concepts
ALV LIST Can be displayed hieraicharlly
ALV GRID cannot be displayed hierarichally
Reward if usefull

Why sapscripts are client dependent & smart forms are client independent?

why sapscripts are client dependent & smart forms are client independent?

You developed the script in development client , you can't find the same in testing client even though the server is same.
Where are You developed the smartform in development client , you can find the same in testing client even though the server is same.
Few more reasons why....? Please read below:
SAPscript technology is based on a mainframe product from the 1980s,
while Smart Forms have only been around since (roughly) 2001. With that sort of time gap,
there are bound to be significant differences between the two tools. As you have noted correctly, client dependence is a fundamental one.
Although SAPscript has had some incremental improvements over time,
its forms have always been -- under the hood -- relatively passive objects, with minimal embedded logic.
These forms were designed to be driven and controlled by ABAP programs,
much in the way ABAP programs read in database tables to produce reports;
if you ever download a SAPscript form (e.g., via utility program RSTXSCRP),
and look at the portable text file it produces you'll see what I mean.
Many text objects (e.g., invoice header texts) are bound directly to documents which are client-dependent, so it makes sense for these text objects to also be client-dependent. From a complexity standpoint, SAPscript forms are close enough to these text objects where I can see how it made sense at the time to make them client-dependent too.
Conversely, a Smart Form is significantly more robust and complex. For instance, it can contain program nodes and nested tables with patterns. When a Smart Form is compiled, it generates an ABAP function module and these are always client-independent. This is appropriate, given that this form has more in common with an ABAP program than its predecessor. For instance, when a print program calls a Smart Form, the form itself takes over to produce output, without any further direction from the print program. In fact, the join is so seamless that I often find myself using a Smart Form's Initialization section for logic to handle any data gathering not handled by the print program. I would never even think to attempt this with SAPscript.
Several factors figured into SAP's decision to make Smart Forms client-independent, including customer feedback. There are significant advantages to client-independence. For instance, a change made in one development client happens immediately across all development clients. Among other things, this means we don't have to waste time figuring which client contains the most recent version -- they all do! In addition, transporting Smart Forms is easier, since we can safely bundle them together in the same transport as their client-independent print programs (no worry about mixing client-dependent and independent objects).
Check the beloe links for more information
script and smart forms
http://www.sap-img.com/smartforms/smartform-sapscripts.htm

I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.

I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.

Update: An Apple rep called me today to update the status of my return. I was told that the replacements for the BLACK iPad 2's was still another 3 weeks out (at least) so they offered me a brand new WHITE 16GB iPad 2. I could have that or continue waiting. I opted to go ahead and accept the offer of a new white one. Worst case scenario if I don't like the white one I have buddy that just bought a 16GB black one that he would be willing to swap it.

Why exceptions are not using in BAPI

Hi,
I would like to know why exceptions are not using in STANDARD bapi.Is there any reason for this.
Please explain me clearly
Thanks in advance
Thanks and Regards,
Venkat

Hi,
If the exception is being handled by the caller, meaning that the exception is listed in the EXCEPTIONS section of the
funciton call, then the program will handle it gracefully and continue processing,if it is not in this section of the
funciton call, and it is raised inside the funciton module,
it will issue an ABAP dump and end. This is true for
foreground processing as well as background processing.
https://forums.sdn.sap.com/click.jspa?searchID=12141509&messageID=5433799
Regards
Kiran Sure

Why lables are not possible in smartforms.

In script Lables are possible but in smartforms lables are not possible .
why lables are not possible in smartforms?

HI,
Refer to the wiki in the link.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/label%2bprinting%2bin%2bsmartforms
Regards
Sumit Agarwal

Why Interceptors are not used in Entity beans?

Why Interceptors are not used in Entity beans?
Interceptors can be used in MDB, Session bean but not in Entity bean....why so?
Thanks,
Rahul.

Hi,
why batch updations are not prefered in entity beansPlease refer the specification of ejb and find out what the entity bean is meant for.In short the emtity bean represents the object state which can be persisted.
Talking regarding the batch updations does not make sense , also the entity bean represents the row of the table mapped to the Object(java Object).
Regards
Vicky

Why there are no layout in number 3.0 ????????

why there are no layout in number 3.0 ????????
I need to export the number file to PDF file , I don't want all of the pages are together , I need to seperate the pages in PDF file , I need the PDF file with layout function , just like previous version .
why are this useful function missing in new version ????????????????????????????????????????????????????????????

All we know here is that the new version of Numbers is significantly different than the old version of Numbers. We didn't write the specifucation nor do we know what the objectives were for the redesign, other than Apple's stated desire to make the three platform versions of Numbers as compatible as possible across platforms. That's the best "why" we can give you.
Thanks for using only one exclamation point in your last post.
Jerry

Why endnotes are far of control in ID4?

Similar Messages

Maybe you are looking for