Why EP is very slow just after it is started?
Hi, all.
Our env is like the following.
EP 7.0(NW 2004s).
But i think this also applies to NW 2004.
Just after EP is started, when the first user logs on, EP is very very slow
(takes long time while logging on and navigating) and its server CPU goes 100%
for a while. Why?
This phenomena is very similar to the situation that usual JSP web pages are
slow at first because it has to be compiled. Does EP have the same reason?
1. Could someone teach me what would be the possible reason?
2. Is there any way to avoid this phenomena? Like precompiling or something
like that.
Best Regards.
Hi Sejoon,
To add to answers above - When a user logs in , in addition to login time and services/components are loaded into memory, also first time navigation takes time. This is to load the entry points (in TLN and first level DTN). These entry points are loaded into navigation cache (if not there yet). if indeed it takes too much time to load these navigation entries and its a problem , you can consider using the navigation cache preloader:
see http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0f1358d-0812-2c10-b58c-c7bdd7a0cdce?QuickLink=index&overridelayout=true&42477226648018
and http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0f1358d-0812-2c10-b58c-c7bdd7a0cdce?QuickLink=index&overridelayout=true&42477226648018#page=30&zoom=100,0,842
It will upload all of the roles of a specified user into the navigation cache.
Best Regards,
Tal
Similar Messages
-
Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I am using ipod touch 4g 8 gb, with ios6 software. It is getting very very slow even after i reinstalled the software. Apps like temple run 2 and subway surfers are getting stuck and it is very very slow.My ipod has 2.6 gb free space. What is the problem. I am not getting to know. Even after i reinstalled these apps it is still getting stuck and it is very very slow. Is this what i get after paying so much money for ipod. Is this what i get very poor perfomance.
Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
Next
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
helloo my name is jafthel i have problems with my ipod touch 4g. if you can help me how i can fix it or solution i will be very happy. the problem is: when i push some aplication my ipod is very slow i after 3 minutes it goback to the home screen.
Next try the remaining items of:
Apps crashing
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
Very slow Safari after IOS8 Iphone 5S
Hello all
I live in Iraq, so basically internet here is very slow, however after installing IOS 8, Safari now is very very slow
I tried other browsers and they were a better
any one of you guys have similar issue ?My iPad and iMac are really screaming after the update. My iPhone 4 is running more slowly. What's odd is that even with it right next to the AEBS it's running slow. The iPhone 4 is listed as 802.11 b/g/n in Airport Utility in the Advanced/Wireless Clients window. When it was running slow, the signal level was OK (actually good-about the same level as the iMac) but the noise was high so the signal to noise ratio was only between 12 and 20 dB. Also the rate was at 5 and staying there 9 (not sure what the rate number is but it was much smaller than all the others clients).
I turned WiFi OFF on the phone then back on again. When it came back, the signal to noise ratio was better (went to about 30-40 dB, and the rate went up to 58. Then after a few minutes, the signal to noise ratio went back to about 20 and the rate number dropped to 5 again.
I'm not sure what this all telling me exactly, but I agree the iPhone seems a bit slower. It's running quite a bit below my 60 day average for download and uplaod speeds - especially a ways away from the AEBS (new 5th gen). The other devices (iMac and iPad are performing as good and even a little better than their 60 day averages. -
Why system is very slow after installing Mavericks
After installing mavericks my system becom very slow. startup also very slow. when i open an application it spins. what should i need to do
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
Why aperture running very slow?
I just installed additional ram and the other day aperture was running extremely slow. The only other application was iphoto.
How much CPU power does aperture require?
thanks.sharon108 wrote:
After consolidating iPhoto pictures into Aperture Library - and having to rebuild library all photos are shown under "Other" in storage under About this Mac. How do I get photos back into the Photo section. I am sure this is why Aperture is running very slow. Aperture library is on a 500 GB external USB hard drive. Does anyone know how to get photos into the right spot in the storage.
Nothing in my experience would make me draw the same conclusion (that the reporting of your Aperture Library as "Other" is why Aperture is running slowly). You report that your Library is on an external drive connected via USB. Is this USB 2 or USB 3?
The consensus is to put your Library on your fastest (lowest latency and highest throughput) drive. This is almost always your system drive. If your Library does not fit on your system drive, you are advised to move some or all of your Images' Master from the Library to a second drive using "File→Relocate Masters". If you want help with these set-ups, post back. -
Mid-2010 27" iMac very slow, even after clean OS install - HELP!
Good afternoon guys, I'm hoping someone can offer me some advice.
I bought my Mid-2010 27" iMac in May-ish 2011. Everything was brilliant, I couldn't believe the ease of use, and especially the start up speed, coming from a world of PCs. My iMac was used almost every day, for web browsing, photo editing, etc.
Maybe about April / May this year it started becoming very slow, slow to boot, slow to respond to mouse clicks, slow to do anything. Since I'd used about 750GB of my HDD (mainly photos), I decided I would archive some and hope that would ease the congestion. As my photos were stored in Aperture, it took about 3 days to export them all to my external HDD, 3 days of the iMac only getting so far, switching itself off, then me finally getting it to come back on (I was getting messages about Kernals, etc. now and again through boot too) - it finally backed up my photos I have from my daughters first year.
Great news, but I still had probably 400GB / 500GB of photos from her second year and any other photos I'd taken. I found the root of my Aperture directory, and managed to pull these images off, so everything is now backed up.
I decided I should try and clean install, and managed to get the HDD to boot and choose the option to re-install from Apple's Servers. All installed OK, and we're good to go! Fired up the iMac, and although it's fractionally quicker to respond, and a lot more stable, it's not quite right. And I've lost all my iLife Apps which originally came with the iMac.
Does this sound like a HDD issue? As I say, it was on quite a lot through the backup procedure, and I had set it (maybe stupidly looking back now) to never sleep, and for the monitor to only switch off after 3 hours. Or does it sound like something more is wrong with it?
I am quite confident of working with PCs, so would manage to replace the HDD I think, looking at some videos, etc. online. I did upgrade the RAM to 16GB, and that was simple enough. My question is, when you replace the HDD, how does it know where to look to the Apple Servers for the clean OS install? Or do I have to do something to let it know where to look first? I have to point out I don't have any Time Machine backup, etc. as the iMac was just not stable enough to get this in place - and up until that point, again probably stupid now looking back, I had never bothered to set up.
Any help / advice on this matter would be greatly appreciated. At the moment I have totally fallen out of love with the iMac, for something to cost £1,500+ and only last 3 years, where my last build PC lasted Approx 8 years for half the price, is very disappointing.
Thanks in advance,
ColJust suggesting things right off the bat here-
To me it sounds as though the HDD is failing, if your iMac shipped with a Seagate drive try entering your serial number to see if Apple will replace it:http://www.apple.com/au/support/imac-harddrive/
Or try running Apple Hardware Test a few times back to see if it is a hardware error.
As for the iLife apps they should've come on one of the install discs that shipped with your mac.
If your iMac is ineligible for the program above I would consider replacing it yourself with either an SSD or HDD, as for recognising apples servers for download, you will need the original install discs that came with your computer or if you haven't already it will need a firmware update to enable internet recovery
See here:Computers that can be upgraded to use OS X Internet Recovery
Good Luck! -
Very slow connection after phone line repair
I had my phone line repaired yesterday with new cabling and new BT box for phone and computer.My phone is fine, but the hub for my broadband does not appear to be ok. the phone symbol on the hub did not light up at all this morning, and after restarting the hub and going back to default settings it is now glowing orange only. It was ok yesterday after being fixed. Very slow connection now. Should i keep everything on to see if it will right itself, or re-start yet again?
I have been looking on BT's options for fixing but can't seem to find anything. the connections in my area are fine so it can't be an outside faultWhich home hub do you have? Did you recently re-contract or change your package, as that will affect your hub phone.
As for the speed issue, it should get better if you leave it alone.
See Why has my speed dropped
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Macbook running very slow - just started, HELP
Hello,
My MacbookPro just recently started running very slow, even doing simple tasks it runs slow. Was working perfect Sep. 8, 2014. Turned it off for the night, then turned it on the next morning and it took about 5 mins just to even turn on. After it finally turned on EVERYTHING just started running opening the internet, Word, Power Point, and even iTunes was running slow. The songs were literally stopping every 30 seconds. My Mac has worked perfect and all of the sudden BAM. I use it for school all the time so its kind of stressing me out. It keeps freezing up as Itype this message unfortunately.
I ran Etrresoft like most ask here are results:
NOTE** - I deleted Hamchi awhile back, i am unsure how to get rid of it because i don't know where to find it, i thought i had deleted everything.
EtreCheck version: 1.9.15 (52)
Report generated September 10, 2014 at 9:21:52 AM CDT
Hardware Information: ?
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 1:15:47
Disk Information: ?
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (419.23 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.logmein.hamachi (1.0) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[running] com.logmein.hamachi.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
Launch Agents: ?
[failed] com.gopro.stereomodestatus.plist Support
[failed] com.logmein.hamachimb.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
User Login Items: ?
iTunesHelper
Alfred
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Cineform Support
Flash Player Support
Java Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
4% syncdefaultsd
4% WindowServer
1% hidd
0% securityd
0% usbd
Top Processes by Memory: ?
160 MB mds_stores
115 MB Safari
102 MB com.apple.WebKit.WebContent
82 MB com.apple.IconServicesAgent
53 MB Finder
Virtual Memory Information: ?
1.61 GB Free RAM
1.36 GB Active RAM
415 MB Inactive RAM
639 MB Wired RAM
328 MB Page-ins
0 B Page-outsStart up in safe mode and uninstall or update Hamachi.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software. -
Since download of Firefox Hello my home desktop & laptop, both on Windows 7, are very slow to open. I have refreshed firefox, removed download history and turned off the anti virus software in extensions. All the plugins are up to date. Can we revert back to Firefox without Firefox Hello?
Firefox Hello is simply a wrapper for technology already in Firefox, it doesn't negatively impact performance if you aren't using it. Are you saying that your entire computer is slow or just Firefox?
-
Very slow mac after installing yosemite
I have already tried all the online tips (like turning off transparency etc) but nothing works. I have also run Etrecheck and will include the report:
Problem description:
Mac very slow after installing yosemite
EtreCheck version: 2.1.8 (121)
Report generated 25 Mar 2015 16:49:59 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Click the [Adware! - Remove] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,1
1 2.7 GHz Intel Core i5 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
Empty
BANK 1/DIMM1
Empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 1:0:10
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (414.76 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5690H
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/hosts - Count: 5
Gatekeeper: ℹ️
Mac App Store and identified developers
Adware: ℹ️
Geneio [Adware! - Remove]
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.10) [Click for support]
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (2.0 - SDK 10.10) [Click for support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.avast.update-agent.plist [Click for support]
[loaded] com.avast.userinit.plist [Click for support]
[loaded] com.hp.help.tocgenerator.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[not loaded] com.teamviewer.teamviewer.plist [Click for support]
[not loaded] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.avast.init.plist [Click for support]
[loaded] com.avast.uninstall.plist [Click for support]
[loaded] com.avast.update.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[not loaded] com.teamviewer.teamviewer_service.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.avast.home.userinit.plist [Click for support]
[loaded] com.divx.agent.postinstall.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
Mail Application (/Applications/Mail.app)
Google Chrome Application (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
OVSHelper: Version: 1.1 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
EPPEX Plugin: Version: 3.0.5.0 [Click for support]
DivXBrowserPlugin: Version: 2.2 [Click for support]
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
Open in Internet Explorer
Audio Plug-ins: ℹ️
WireTapAnywhere: Version: 2.0.0 [Click for support]
3rd Party Preference Panes: ℹ️
DivX [Click for support]
Flash Player [Click for support]
Java [Click for support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 584.59 GB
Destinations:
HEIDI [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 584.59 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% CalendarAgent
1% Mail
0% Google Chrome
0% fontd
Top Processes by Memory: ℹ️
198 MB Google Chrome
114 MB Google Chrome Helper
94 MB Mail
86 MB Finder
82 MB mds_stores
Virtual Memory Information: ℹ️
61 MB Free RAM
1.44 GB Active RAM
1.40 GB Inactive RAM
906 MB Wired RAM
4.92 GB Page-ins
64 MB Page-outs
Diagnostics Information: ℹ️
Mar 25, 2015, 03:46:40 PM Self test - passed
Mar 25, 2015, 11:26:31 AM /Library/Logs/DiagnosticReports/Preview_2015-03-25-112631_[redacted].hang
Mar 25, 2015, 11:26:30 AM /Library/Logs/DiagnosticReports/Preview_2015-03-25-112630_[redacted].hang
Mar 25, 2015, 11:26:21 AM /Library/Logs/DiagnosticReports/Preview_2015-03-25-112621_[redacted].hang
Mar 25, 2015, 10:54:50 AM /Library/Logs/DiagnosticReports/com.avast.daemon_2015-03-25-105450_[redacted].c pu_resource.diag [Click for details]
Mar 23, 2015, 12:30:12 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Adobe Photoshop CS5.1_2015-03-23-123012_[redacted].crashI am having problems with slowness, too - ever since installing the latest Yosemite update I downloaded a few days ago. EVERYTHING - Safari, QuickTime, MS Word for Apple, the DVD Player, everything - runs slowly and I get the "rainbow pinwheel of frustration". It's taken me three minutes to type these few sentences. It's really starting to frustrate me. Here is my EtreCheck report:
Problem description:
Since I installed the latest Yosemite update (10.10.2), EVERYTHING runs slowly. I get the rainbow pinwheel whenever I click on anything on Safari, and have trouble typing via Safari; videos stop and start on QuickTime; MS Word for Apple runs slowly - EVERYTHING seems to be slowed down. It took four minutes to get the above sentences typed. Please help me escape the “rainbow pinwheel of failure”!
EtreCheck version: 2.1.8 (121)
Report generated March 26, 2015 at 12:56:40 PM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 16
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
Color LCD 1680 x 1050
NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 4 days 13:7:46
Disk Information: ℹ️
ST9500325ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (67.68 GB free)
Encrypted AES-XTS Unlocked Converting
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-898 disk3 : (4.13 GB)
USB Information: ℹ️
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Seagate FreeAgent GoFlex 500.11 GB
EFI (disk2s1) <not mounted> : 210 MB
Time Machine Backups (disk2s2) /Volumes/Time Machine Backups : 499.76 GB (9.35 GB free)
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.devguru.driver.PTUMWDrv (9.6.8) [Click for support]
[not loaded] com.seagate.driver.PowSecDriverCore (5.0.1) [Click for support]
/System/Library/Extensions/PTUMWDrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.PTUMWCDFree (9.6.8) [Click for support]
[not loaded] com.devguru.driver.PTUMWCSP (9.6.8) [Click for support]
[not loaded] com.devguru.driver.PTUMWDIAG (9.6.8) [Click for support]
[not loaded] com.devguru.driver.PTUMWMdmControl (9.6.8) [Click for support]
[not loaded] com.devguru.driver.PTUMWMdmData (9.6.8) [Click for support]
[not loaded] com.devguru.driver.PTUMWNMEA (9.6.8) [Click for support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.0.1) [Click for support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.0.1) [Click for support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.0.1) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
6 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.installd.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
12 processes killed due to memory pressure
Launch Agents: ℹ️
[unknown] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.seagate.SeagateStorageGauge.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.memeo.Memeod.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[unknown] com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
CBCStatusMenu Application (/Applications/Cricket Broadband Connect.app/Contents/Resources/CBCStatusMenu.app)
EEventManager Application Hidden (/Applications/Epson Software/Event Manager.app/Contents/Resources/Assistants/Event Manager/EEventManager.app)
EEventManager Application (/Applications/Epson Software/Event Manager.app/Contents/Resources/Assistants/Event Manager/EEventManager.app)
ConnectService Application (/Library/Application Support/ArcSoft/Connect Service/ConnectService.app)
MemeoAgent Application (/Library/Application Support/Memeo/Memeo Backup/Agents/MemeoAgent.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
CitrixICAClientPlugIn: Version: 11.2.0 [Click for support]
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
Unity Web Player: Version: UnityPlayer version 4.3.5f1 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.10516.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Safari Extensions: ℹ️
AddThis
Greenhouse
3rd Party Preference Panes: ℹ️
Citrix Online Plug-in [Click for support]
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 431.20 GB
Destinations:
Time Machine Backups [Local]
Total size: 499.76 GB
Total number of backups: 67
Oldest backup: 2014-04-22 12:40:59 +0000
Last backup: 2015-03-26 15:08:56 +0000
Size of backup disk: Too small
Backup size 499.76 GB < (Disk used 431.20 GB X 3)
Top Processes by CPU: ℹ️
4% WindowServer
1% com.apple.WebKit.Networking
0% ConnectService
0% systemstatsd
0% fontd
Top Processes by Memory: ℹ️
142 MB Safari
90 MB com.apple.WebKit.WebContent
39 MB com.apple.WebKit.Networking
34 MB com.apple.WebKit.Plugin.64
34 MB WindowServer
Virtual Memory Information: ℹ️
43 MB Free RAM
946 MB Active RAM
911 MB Inactive RAM
967 MB Wired RAM
21.68 GB Page-ins
870 MB Page-outs
Diagnostics Information: ℹ️
Mar 25, 2015, 04:31:02 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.Plugin.64_201 5-03-25-163102_[redacted].crash
Mar 25, 2015, 02:16:40 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-25-141640_[redacted].crash
Mar 25, 2015, 10:04:38 AM /Users/[redacted]/Library/Logs/DiagnosticReports/Aperture_2015-03-25-100438_[re dacted].crash -
Very slow Macbook after updating to Yosemite.
Two questions;
1) I updated to Yosemite a few days ago and like it. But my macbook (2013) is now running very slow. I have done all the latests software updates.
In the Activity Monitor, a process called DesktopServicesHelper (PID 1681) take up 99% of my CPU%. What is this and why? How do I fix it? Please help!
2) Also in the Activity Monitor, there is a process which is not responding, called com.apple.geod (PID 1703). What is this? What does it mean? How do I fix it?When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Why does Firefox performance slow down after starting Jack server?
Hello,
I started configuring my audio on my system. So, I want to have jack working (not jack2, to work with wineasio) with best sound quality with all sound routed through jack. When i start jack server with this command and settings:
killall jackd;killall pulseaudio;jackd -R -t 1000 -d alsa -P hw:0,0 -r 48000 -n2 -D
Firefox slows down, opens new pages slow and the scroll down is very very slow. I had this issue with other distros too. I suspect that it has to do with realtime ( which i need for my audio related apps like traktor through wine, ardour, ableton through wine etc) without being sure about it. Any idea why this is happening?zabrielza wrote:I had this issue with other distros too.
This smells like hardware problem. Do this:
1. Kill pulseaudio, jack, and make sure they are killed
2. Make sure you do not renice anything or apply other such tweaks
3. Run jackd -d alsa
4. Use your system
5. If unsatisfactory, try jackd -d alsa -p 1024 -n 3
6. Use your system
Jack runs with realtime priority by default (no flag required), and we still use the audio group to provide that privilege. I also do not advocate the realtime kernel, but you may try it. Jack not functioning well (i.e. hampering other tasks significantly) on a standard kernel is cause for concern.
You can read/grep your dmesg and systemd journal for suspicious messages. You may try running real-time audio tasks in another operating system with your hardware, and upon success may proceed to debug the problem on Linux, possibly with the help of the alsa developers.
Or better yet, grab a supported semi-pro external audio device if jack is important for you. However, this may not help if the problem is somewhere deeper, e.g. at the hardware interrupt level.
Last edited by schivmeister (2015-04-30 18:21:56) -
Time Capsule 3T WiFi very slow, just 0.4Mbs.
When connected directly to the the internet cable the speed is over 2.5Mbs, but only 0.4Mbs through Time Machine 3T (802.11ac).
I tried to turn everithing off and turn them on one-by-one, from the internet radio receiver to the Time Machine, then MacAir 13 Mid 2013.
How can I fix it?
The AirPort Utility does not offer any resource to do it.
It had been running just fine since installed on October/2013 and I noticed that it was getting slower in the last 5 weeks and now it is slow all the time.
I can do the basic on MacAir but AppleTv just do not allow me to watch a movie on Netflix (I can browse through all windows but the movie won't start).
Thanks for an answer,
edudreyedudrey wrote:
When connected directly to the the internet cable the speed is over 2.5Mbs, but only 0.4Mbs through Time Machine 3T (802.11ac).
Just need to confirm a few things.. 2.5Mbps is very slow.. if you use b for bits as we try to do.. if you mean Bytes, then that is ok. We try and use B for Bytes.
from the internet radio receiver to the Time Machine, then MacAir 13 Mid 2013.
So you are getting internet via wireless.. not from standard cable or adsl modem?
What is the modem and is it a router as well??
How is the TC connected to the modem router and in what mode??
If you use any client on the TC wired, can you test it??
If you use wireless have you made sure to use all names that are short, no spaces and pure alphanumeric.
Mavericks now uses SMB networking by default so it can help..
More importantly the ipv6 is set correctly to Link-Local.
Maybe you are looking for
-
I need to decrypt my factory hdd from my macbook pro.
I had removed my factory HDD from my laptop to replace it with a larger HDD. I placed the factory HDD in a case to use as an external drive, however, I can not get access to any of my files. I get an error saying the data is encrypted and i do not ha
-
Adobe Flash Player 11.9 r900 has stopped working error message
keeps popping up every time I open a link. How do I stop these popups?
-
I have developed IDOC to AS2 secenerio but while testing i am getting following error MIC not verified # authentication-failed I am new in XI please help
-
Metadata issues in A3 - This is a real concern
Metadata issues in A3. This is a real concern if your images go to third parties from A3. http://www.controlledvocabulary.com/imagedatabases/aperture3.html
-
Hello, does anybody know if there is a business card scanner which supports SAP CRM ? We actually run SAP CRM 5.0 and have a workaround to create flat files to upload them to SAP with a special report. Thanks in advance, Thorsten