Why error message when trying to put in a transition?

I'm using iMovie 4 and can not put in a transition. I'm getting error message 4960, "error in system operation". I've successfully added transitions up until now. What gives? Thanks.

Have you tried either of the free Ringtone converter programs - MusicTones or MiniTones?
Both can be found on freewarepalm.com.   If you need help with either, I can assist...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • Error message when trying to put pictures on my I-Pod

    When I try to put pictures on my I-Pod, I get an error message "The file "dad.jpg" cannot be imported because it does not appear to be a valid exported file. This happens no matter which pictures I try to put on.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
    tt2

  • Error message when trying to put whole cd on ipod

    Everytime I try to put a whole cd on my ipod, i get an error message that states this song cannot be played on this ipod. If i put mp3's on the ipod, it works fine. Is there a certain setting I need to be on?

    Have you tried either of the free Ringtone converter programs - MusicTones or MiniTones?
    Both can be found on freewarepalm.com.   If you need help with either, I can assist...
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Error message when trying to put videos on my 30G ipod video

    Every time I try to put videos from iTunes onto my ipod I get an error message saying that the video "could not be copied onto "Brennen's Ipod" because it cannot be played on this iPod".

    Hey AJS4862,
    Thanks for the question. If I understand correctly, you are having trouble installing iTunes on Windows. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    Issues installing iTunes for Windows - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • Getting error message when trying to burn cd's

    hi i am getting a error message when trying to put certain cd's on i-tunes :
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    VIA Technologies, Inc. VT8366A-8233
    iTunes 7.5.0.20
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    Current user is an administrator.
    The current local date and time is 2007-12-01 13:35:51.
    Video Display Information:
    NVIDIA GeForce4 MX 440 (Microsoft Corporation)
    ** CD/DVD Drive Tests **
    UpperFilters: GEARAspiWDM (2.0.6.1),
    D: HL-DT-ST DVD-RAM GSA-H55N, Rev 1.00
    Audio CD in drive.
    Found 4 songs on CD, playing time 20:08 on Audio CD.
    Track 1, start time 00:02:33
    Track 2, start time 04:00:35
    Track 3, start time 09:01:05
    Track 4, start time 14:49:05
    Audio CD reading failed. Error Code: 1117 1117 1117 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.
    iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
    Get drive speed succeeded.
    The drive CDR speeds are: 8 10 16 40 48.
    The drive CDRW speeds are: 8.
    The drive DVDR speeds are: 8.
    The drive DVDRW speeds are: 8.
    D: HL-DT-ST DVD-RAM GSA-H55N, Rev 1.00
    Audio CD in drive.
    Found 4 songs on CD, playing time 20:08 on Audio CD.
    Track 1, start time 00:02:33
    Track 2, start time 04:00:35
    Track 3, start time 09:01:05
    Track 4, start time 14:49:05
    Audio CD reading failed. Error Code: 1117 1117 1117 1117 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.
    iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
    Get drive speed succeeded.
    The drive CDR speeds are: 8 10 16 40 48.
    The drive CDRW speeds are: 8.
    The drive DVDR speeds are: 8.
    The drive DVDRW speeds are: 8.
    please could you help

    Thanks for replying. I went to the store and bought CD's and DVD's of different brands, many of which I have used in the past. All but a couple of them worked. Maxell, Memorex, Verbatim and Sony did not work.
    After several long discussions with AppleCare and some tests, they finally determined that the Superdrive needs to be replaced. So, I'm off to the Apple Store.
    Thanks again!

  • Get error message when trying to sync iphone to puter that says"cannot connect because apple mobile divise is not started? what do i do?

    get error message when trying to sync iphone to puter that says"cannot connect because apple mobile divise is not started? what do i do?

    Restart your computer and the iPhone. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.

  • Why am i getting error message when trying to install iOS 7.0.3 to iPhone 5?  It just won't download.

    Why am i getting an error message when trying to download and install iOS 7.0,3 to iPhone 5?

    Sharonc21 wrote:
    If one is downloading directly to the iPhone via WiFi, it doesn't matter what version of iTunes is on the computer.
    I decided to sync my phone to Outlook via iTunes.  First thing, iTunes discovered that 7.0.3 was not on my phone.  It asked if i wanted to install it.  I said, "yes", and VOILA!! 7.0.3 is now installed on my iPhone.
    So therein is the answer.  Have no idea what bug is in there to keep it from loading to some phones directly via WiFi, but obviously, it is something!!
    There is no bug.  While you can update your iOS via wi-fi, it's recommended to do so via USB & iTunes.  Depending on your wi-fi connection & singal strength, you can get errors.  That's not a function specifically of the device.

  • Why do I keep getting an error message when trying to use passbook?

    Why do I keep getting an error message when trying to use passbook?

    Kind of hard to answer without some details such as iPhoto version and OS version. Are you signed into your Facebook account?

  • Why am I getting an error message when trying to use a template?

    Why am I getting an error message when trying to use a Pages template?

    You are getting an error message because there is an error.
    Knowing wht version of Pages you are using, what template you are attempting to open, and what error message Pages is sending you might help determine why you are getting that specific rror message. Without those, the first sentence above i pretty much all that can be said with any assurance.
    Regards,
    Barry

  • Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv file?

    I went through the forums and made sure that any blocks or copywrites weren't triggered by the file, it's clean and can be opened using a media player and other video editing software like windows MovieMaker. I keep getting "The importer reported a generic error" message and have no idea how to proceed. Can someone please help?

    Re: Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv  file?
    This ARTICLE starts with a checklist on setting up a computer to run PrE best, then goes into a series of links for tuning up one's computer and OS, and then links on troubleshooting.
    There is also a link on posting all necessary info, to help others help you.
    Without knowing much more about your system, it is impossible to say much beyond that WMV's are tough assests to work with, requiring a lot of CPU horsepower.
    Good luck,
    Hunt

  • Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

    Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

    Try the troubleshooting tips here:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
    You may have something in your project on one of the slides that is tripping up the publishing process.

  • Why is there suddenly an error message when trying to download pdf documents online: "cannot export document"

    Why am I recently receiving an error message when trying to download pdf documents from the web? The message reads: "cannot export document" I've updated Adobe and all software updates are current. The first indication of a problem was when I opened a pdf that I thought downloaded, but the file is blank. Now that doesn't even happen. Any help would be tremendously appreciated! Thank you, KB

    I know man what your saying. I should have written it down when it happened last night. I figured if anyone had had the same issue they might know the reason. I'll try doing a test recording today and see if the same issue arises. Meanwhile, if anyone has this happen to them please let me know. Thanks

  • HT204053 I am getting an error message when trying to sign into my icloud. Help

    Why do Iget an error message when trying to sign in my icloud?  Can you also tell me how to combinned my icloud accounts?

    If they were in your camera roll and on your phone when you last backed up, they would be included in your iCloud backup.  If you restored the entire backup you should recover them.

  • Error Messages when trying to install, uninstall or run iTunes 9

    I get the following error message when trying to Install iTunes:
    The path C:\DOCUME~1\Frank\LOCALS~1\Temp\IXP206.TMP\iTunes.msi cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
    I search my entire computer for the file but it's not there.
    Then, when I try to uninstall the iTunes and start the install from scratch I get another error:
    "The feature you are trying to use is on a network resource that is unavailable"
    Catch-22, I can't install or uninstall and when I try to run iTunes I get:
    "The action is only valid for products that are installed"
    Very frustrating but I'm stumped and I don't know how to proceed. Any help would be very much appreciated.

    wooooooooo!!! got it working again!! having spent the last 6 hours..no joke six f*cking hours trying to sort it ive finally got iTunes back!!
    ok here is what you need to do:
    go to the link below and download the Microsoft Windows Installer CleanUp Facility.
    http://www.locksleynet.com/2009/06/09/missing-itunesmsi-problem-resolved/
    once you have downloaded it, install it and run it from the start menu. once its up and running remove everything to do with iTunes (so iTunes itself, quicktime, bonjour......the lot). Dont worry about removing iTunes completely, all the music is still there when it works again trust me!!
    ok once you have removed everything restart your computer, im not sure if this is a must but i did it.
    next download quicktime from the apple website (go to the 'downloads' tab near the top. download and install quicktime and restart your computer so the new settings are put in to place ( i think it asks you to restart anyway).
    go back to the apple website, 'downloads' tab and download iTunes itself. install that bad boy and you will be up and running with all your library intact!
    Hope it works for you mate!

  • Error message when trying to view/print Crystal reports in B1

    I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:   
    " Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304'  or one of its dependencies.  The system cannot find the file specified.  ????

    Hi
    Common issues for this :
    1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
    Put on the user name and password and click on creating ext tables
    Try then running the report .
    If not the case ,
    make sure you install runtime .
    You need :
    1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
    2.You need to have crystal integration addon (I think service pack is SP1)
    3.Make sure you have runtime install
    When you are installing ,make sure you restart your PC before you do or remove temporary file s
    Hope this solves your issue
    Bishal

Maybe you are looking for

  • Keynote and/or Powerpoint content in Final Cut Pro

    Hope this is not a stupid question but if it is please excuse me, I'm rather new to FCP. My colleague wants to produce some webcasts of his business presentations. Normally he uses Powerpoint to illustrate his talks. Is it possible to somehow take th

  • Why is a small L character showing up at the end of a paragraph?

    This only happens on a few pages and only in internet explorer. Image attached!

  • ARE1& ARE3

    Hi Gurus excise values r not flowing in to ARE1&ARE3.Plz help me if there are any hard core codition type to be maintained or any configuration left.plz help me With Regard's

  • I have a mac osx 10.4.11 from mid 2007 how do I upgrade

    I would like to upgrade my mac 10.4.11 from mid 2007 but am not really sure where to start!  I am a little challenged in the computer world Thank you for any infromation you may have

  • Can't reactivate phone number

    I am trying to reactivate a phone number for one of the users in my Skype Manager. When I click Buy as part of the reactivation process, I am taken to a page that says "Service Unavailable", and says come back in a few minutes.  This has been true fo