Why error??

i got an error message
says like that
code too large
why is that how do i fix it
thabks in advance

Where is the 64Kb limit specified? I have run into a
similar problem with the initialization of large data
structures; specifically, an array mapping the
Unicode BMP characters to a LineBreak class. I am
staggered to think that large arrays cannot be
initialized.I don't think you are having the same problem. What exactly is your error message? Out of memory? Please start a new thread for your probably new topic.

Similar Messages

All ALE configuration are right, but why errors in idocs?

hi any anybody explains why error are occurs in IDOCs when all ALE setting are ok. please explain any scenario

Hi,
One of the commonly occuring error status - 26(Syntax error in Idoc) Outbound
The reason for the occurence of this error is mostly related to the structuring of the segments in the IDoc, the normal structure should have a parent segment followed by the sub segments but in cases when that fails to happen, the Idoc is in 26 status. For correction of this error goto WE30 and check if the mandatory segment is checked.
status 51(Application Document not posted) Inbound
This normally occurs due to the incorrect data being populated in the segments or it could also be related to serialization.
~Krithika

Why error 21?

My ipod touch wont restore. i get error 21 message Why?

Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
from:
http://support.apple.com/kb/TS3694

Trying to start the j2ee to be the JMS provider but why error

Anyone knows why I can't start the j2ee ..which I hope to use it as the JMS provider. I am trying to try the e.g. from JMS tutorial....
But it seems that I can't start the j2ee in the first place 'cos error say that I have another instance running...(but I didn't start anything in the first place). How should I solve this?
How could I stop the j2ee server....I tried the command
j2ee -stop but cannot..
Anyone can help?
AG
G:\jmseg\simple>j2ee -verbose
J2EE server listen port: 1050
java.lang.RuntimeException: Could not initialize j2ee server. Possible cause cou
ld be another instance of the server already running.
at com.sun.enterprise.iiop.POAProtocolMgr.initializeNaming(POAProtocolMg
r.java:134)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:227)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:918)
java.lang.RuntimeException: Could not initialize j2ee server. Possible cause cou
ld be another instance of the server already running.
at com.sun.enterprise.iiop.POAProtocolMgr.initializeNaming(POAProtocolMg
r.java:134)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:227)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:918)
java.lang.RuntimeException: Could not initialize j2ee server. Possible cause cou
ld be another instance of the server already running.
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:355)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:918)
J2EE server reported the following error: Could not initialize j2ee server. Poss
ible cause could be another instance of the server already running.
Error executing J2EE server ...
G:\jmseg\simple>

I got exactly the same message when I tried to start j2ee server... It worked fine the second time round though, So I suggest you try it again.
tim..

Why error message?

I am attempting to learn to do in Flash some things I have
typically done in Director. Needless to say, it's been a tough go.
I have been using some of the Lynda.com stuff and it's been
helpful, but I now have a problem I can't figure out. I am using a
script that Lynda.com uses in their tutorial movies. I copied it
(except using my names for things, of course) and from what I can
tell, I did it correctly, but I keep getting an error message. Here
is my action script (in it's own layer):
stop();
function onIntroClick(evt:MouseEvent):void {
gotoAndStop("intro");
introbut2jpg.addEventListener(MouseEvent.CLICK,
onIntroClick);
It's just a graphic I turned into a button that should jump
to the frame labeled "intro" and stop there. Works great in the
tutorial, but I get:
Location: Scene = Scene 1, layer = Actions, frame=39, Line 3
Description: The class or interface 'MouseEvent' could not be
loaded.
Source: function onIntroClick(evt:MouseEvent):void {

Here is the code for all 3 buttons playing the flvs:
stop();
var tl:MovieClip = this;
function onIntroClick(evt:MouseEvent):void {
tl.gotoAndStop("intro");
intro_butjpg.addEventListener(MouseEvent.CLICK,
onIntroClick);
stop();
function onTeachingClick(evt:MouseEvent):void {
tl.gotoAndStop("teaching");
teachbut.addEventListener(MouseEvent.CLICK, onTeachingClick);
stop();
function onMentalClick(evt:MouseEvent):void {
tl.gotoAndStop("mental");
mentalbut.addEventListener(MouseEvent.CLICK, onMentalClick);
I don't understand why it works with 1, then with 2, but not
with 3.

Please tell me why error is comming in select query

Hello Experts... please tell me why the error is comming at mblnr in s_mblnr.and also tell me the solution for the same.
SELECT a~mblnr
         a~bwart
         a~matnr
         a~werks
         a~lifnr
         a~menge
         b~budat
         INTO TABLE it_out
         FROM mseg AS a INNER JOIN mkpf AS b
         ON amblnr = bmblnr
         WHERE werks = p_werks
           AND bwart IN s_bwart
           AND mblnr IN s_mblnr " here error is comming pls tell me how to correct. here s_mblnr is selectoptions.
           AND matnr IN s_matnr.
Thanks for all the replies

Hi use the below code..
make sure from which table you are selecting the colums (fields)..
SELECT a~mblnr
a~bwart
a~matnr
a~werks
a~lifnr
a~menge
b~budat
INTO TABLE it_out
FROM mseg AS a INNER JOIN mkpf AS b
ON amblnr = bmblnr
<b>WHERE a~werks = p_werks
AND a~bwart IN s_bwart
AND a~mblnr IN s_mblnr
AND a~matnr IN s_matnr.</b>
Hope it will solve your problem.
<b>Reward points if it is useful.</b>
Thanks & Regards
ilesh 24x7

Why error message she trying to install AirPort software 6.0

Why do I get an error message she trying to install AirPort software 6.0 over 5.5.3.

And that message is exactly? I hope you are aware that you are trying to install software from the stoneage and it may simply no longer be compatible...
Mylenium

Why Error 17068, invalid arg in call: SetRowBufferAt

I am trying to "copy" from one result set to another, updatable, result set and keep getting the error in the subject. Any idea why?
I have fromCatRs which I have verify is opened, has data, and is on the row I want to "copy".
I have toCatRs which I have verify is opened, updatable, etc.
I enter the following code snip with
toCatRs.moveToInsertRow();
int numColumns = fromCatRs.getMetaData().getColumnCount();
// I start copying data.
toCatRs.updateString( "CATCD", fromCatRs.getString( "CATCD") );
and I get the following error.
SQLException:
Message: Invalid argument(s) in call: SetRowBufferAt
SQLState: null
ErrorCode: 17068
Any ideas greatly appreciated.
null

Hi Baji,
I guess its a typo, please cross check again.
OdiImportObject -FILE_NAME=/opt/Dem-Hyp-PIP/AIA24/F
P249/PIPS/Core/DIS/DemantraHyperion/ODI Master Repository/CONT_HyperionToDemantr
aContext.*xml* -IMPORT_MODE=SYNONYM_INSERT_UPDATE ...
Thanks,
G

HT5192 why error when i update it ??? faill

when i update my VR 5.0.1 up to 5.1 it dosnt scueed they tell me error failed tp update
and there to choise Setting or cancel
if i put at setting its just go back to the soft update page !! please help me

Two possible reasons why you can't update:
Are you sure you have a 3rd gen and not a 2nd? Go to Settings > General > About > Serial Number to get your serial number, then enter it here: http://support.apple.com/specs/
Has your iPod ever been jailbroken?

Why error code 1009 again? i know what is it but...

before this i say to apple that turn of error code 1009 and apple turn it off but now again it happens why? for what? i am just a 17 years old boy that want to play with his ipad when i dont have to study but now how can buy new games i have 4$ in my acount now but becuse of this i cant use it why?
please please please get this error out of our why...
if you do this the people that cant accses app store will jailbreak their idevice
me? no i dont want to jailbreak becuse its bad and now i am here with my ipad 4 wifi 32 gb ios 7.0.2 and i am saying please get this error out of the way i know i am just one guy but everyone dosent have the guts to say this to you apple but i have:
plaese get this error out of the way
please

You will only be able to use your US account when you are in the US, the terms of use of each country's store say that you need to be in the country e.g. for the US :
The App and Book Services are available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the App and Book Services from outside these locations. Apple may use technologies to verify your compliance.

Why error here?

Hello
i dont understand the error of these lines, why there are such these error in java but not c and c++
int ch=0;
if(ch!=0)
String[] str={"a","b","c"};why we can not define a string within a if statement?
thanks in advance

Hello
i dont understand the error of these lines, why there
are such these error in java but not c and c++
int ch=0;
if(ch!=0)
String[] str={"a","b","c"};why we can not define a string within a if
statement?
thanks in advanceYou can define a String array in an if-statement; however, you have to have some code other than just a declaration. The only place that String array can be used is in the body of the if-statement (its scope).
// I did not try to compile this so there could be type-o's
if (ch!=0) {
String[] str={"a","b","c"};
System.out.println(str);
}

Why error code 1009 again ?

i was using appstor in my ipad for 5 weeks and now...error code 1009 why dose it happen again...? please don't delete my post i just want to say to apple: please...please don't do this not for me but for everyone seeing this error please apple turn off this error

i know and i am now in another location and i want to know why apple turn on error code 1009 its really bad
becuse i can not download anything and iwas going to buy an itunes gift card for myself then this error comes!!

Why Error opening JTAG UART ?

I just got a ZC702 board and try to run demo application projects on the board. I follow the instructions to design. I try to run the design with JTAG. However, when I try "Run as->Launch on Hardware" with template project "Hello world", it always show error message in console as "Error opening JTAG UART @ localhost:-1"
I am sure I have configured in "Run Configurations-->STDIO Connection" Port as "JTAG UART" with right BAUD rate, anybody can suggest why it still does not work?
Thanks very much.

I am also having trouble with the JTAG UART in the MicroBlaze Debug Module (MDM). I selected the JTAG UART option in the IP Integrator. Then in SDK I connected STDIO to the console using the JTAG UART but still get this error.
Error opening JTAG UART @ localhost:-1
I am using Vivado and SDK version 2013.4. My hardware is the Avnet ZedBoard with a Zynq 7020. The Zedboard does not have a comm port attached to the FPGA side (PL) of the part so I need to use the JTAG UART for STDIO.
Any advice is greatly appreciated.
Pedro

Why errors with patterns in CS6?

At least once a week, I get an error message that Adobe CS6 has to close down and that I should do a reinstallation of the program and the help files. This happens when I am adding a new layer pattern or heavy use of the gold styles on a file. This was a constant with CS3 and that is why I finally gave up the ghost and bought CS6; now it is happening once again. I cannot be the only user having this problem but haven't seen it when I do a search.
I always appreciate the help you all give me.
PS: Do I need to deactivate and reinstall CS6, really? I hate setting everything back the way I want it and try my best to get by without the reinstall. LOL!
Message was edited by: CountryLiv

Well, it must be nice to be so positive about something that you have to get rude when answering. I was sent to that particular forum when I asked for help about whether I needed to do the uninstall then reinstall to satisfy the error. Forgive me for being an ordinary nerd not an extraordinary one like you! And as far as my workflow is concerned, how much could that impact what i am doing if I am only adding a pattern layer to a single layer document (if you have trouble adding that it is 2 layers total on completion of the task)! My oper system is Win7 Service pack 1 and:
Now that you have the info could you kindly send me somewhere I can get the help I need or at least an answer to the uninstall and reinstall question?
Thank you,
Liv, the ordinary nerd!

Why error message when trying to put in a transition?

I'm using iMovie 4 and can not put in a transition. I'm getting error message 4960, "error in system operation". I've successfully added transitions up until now. What gives? Thanks.

Have you tried either of the free Ringtone converter programs - MusicTones or MiniTones?
Both can be found on freewarepalm.com. If you need help with either, I can assist...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Why error??

Similar Messages

Maybe you are looking for