Why errors with patterns in CS6?

At least once a week, I get an error message that Adobe CS6 has to close down and that I should do a reinstallation of the program and the help files.  This happens when I am adding a new layer pattern or heavy use of the gold styles on a file.  This was a constant with CS3 and that is why I finally gave up the ghost and bought CS6; now it is happening once again. I cannot be the only user having this problem but haven't seen it when I do a search.
I always appreciate the help you all give me.
PS:  Do I need to deactivate and reinstall CS6, really?  I hate setting everything back the way I want it and try my best to get by without the reinstall. LOL!
Message was edited by: CountryLiv

Well, it must be nice to be so positive about something that you have to get rude when answering.  I was sent to that particular forum when I asked for help about whether I needed to do the uninstall then reinstall to satisfy the error.  Forgive me for being an ordinary nerd not an extraordinary one like you! And as far as my workflow is concerned, how much could that impact what i am doing if I am only adding a pattern layer to a single layer document (if you have trouble adding that it is 2 layers total on completion of the task)!  My oper system is Win7 Service pack 1 and:
Now that you have the info could you kindly send me somewhere I can get the help I need or at least an answer to the uninstall and reinstall question?
Thank you,
Liv, the ordinary nerd!

Similar Messages

  • Microsoft Visual C++ Runtime Library R6034 error  with CS6

      When I start up the 64bit version of Photoshop CS6 I get the R6034 error.  After about 20 times to delete the error message 64bit CS5 starts.  This does not happen with the 32 bit version. How do I fix this?

    Thanks for following up.
    There were no error messages that I saw during the installation process.
    The error message comes up when I start the 64 bit CS6 Photoshop the "CS6
    logo" starts, but then freezes when the R6034 error windows start. Each
    error wiindow closes with a click, but then another one opens. This goes on
    for 18 to 20 windows, Then CS6 opens and seems to work fine, including all
    the plug-ins from Nik, OnOne, etc.
      My Dell desktop system is Win 7 Ultimate, Service Pack 1, 12gb ram and 64
    bit OS.  The exact same issue occurs on my Dell laptop with is also Win 7
    Ultimate, Service Pack 1, 16gb and 64 bit Operating System.
    The 32 bit CS6 Photoshop opens with no errors on either PC.
    I re-installed the laptop from the Set-up.exe. The were no errors during
    the re-install but the same problems occurred after the re-install.  The
    same R6034 errors occurred, but the CS6 went ahead and started with all the
    the plugins and actions remained without any additional steps.
      The CS6 64 bit seems to be functional, (whew) but it is a pain to go
    through all the error windows. I don't know what if there is anything that
    won't work because of the C++ Runtime Library difficulty.
    Chuck Bruce

  • Install error with Photoshop CS6

    I am trying to install the trial version of Photoshop cs6. I have attempted the install three times now and if keeps finishing with the same message, "Some items for the following product(s) could not be installed successfully."
    The programs does not run correctly, for example a 3d object that I use in cs4 works perfect, in cs6 it places transparent areas that do not exist.
    What did not get installed and is it causing the trial version to fail to run properly?

    This is what it says:
    DW050: The following payload errors were found during install:
    DW050:  - Adobe Bridge CS6 (64 Bit): Install failed
    DW050:  - Adobe Player for Embedding 3.3: Install failed
    DW050:  - Adobe CSXS Infrastructure CS6: Install failed
    DW050:  - Adobe WinSoft Linguistics Plugin CS6 x64: Install failed
    DW050:  - Adobe Extension Manager CS6: Install failed
    DW050:  - Adobe Player for Embedding x64 3.3: Install failed
    DW050:  - Adobe WinSoft Linguistics Plugin CS6: Install failed
    DW050:  - Adobe Bridge CS6: Install failed
    DW050:  - Adobe Linguistics CS6 x64: Install failed
    DW050:  - DynamiclinkSupport: Install failed
    DW050:  - Adobe ExtendScript Toolkit CS6: Install failed
    [    6436] Tue Aug 21 16:53:36 2012  INFO
    Call PostSession Custom Hook
    :: END TIMER :: [Total Timer] took 942284 milliseconds (942.284 seconds) DTR = 1786.11 KBPS (1.74425 MBPS)
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 25 error(s), 0 warning(s)
    ----------- Payload: {354D20E6-A25F-4728-9DA6-C9003D8F2928} Adobe Player for Embedding 3.3 3.3.0.0 -----------
    ERROR: DF024: Unable to preserve original file at "C:\Program Files (x86)\Common Files\Adobe\APE\3.3\adbeapeengine.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 4)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 4)
    ----------- Payload: {9254D539-549A-41DD-A7DA-251766F2B76F} Adobe Player for Embedding x64 3.3 3.3.0.0 -----------
    ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\APE\3.3\adbeapecore.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 2)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 2)
    ----------- Payload: {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 -----------
    ERROR: DF024: Unable to preserve original file at "C:\Program Files (x86)\Common Files\Adobe\dynamiclink\CS6\boost_date_time.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 1)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1)
    ----------- Payload: {36682D68-3834-487E-BA49-DFA4AB0A2E32} Adobe CSXS Infrastructure CS6 3.0.0.0 -----------
    ERROR: DF024: Unable to preserve original file at "C:\Program Files (x86)\Common Files\Adobe\CS6ServiceManager\adobe_caps.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 1)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1)
    ----------- Payload: {94FEA41F-7345-429F-AA31-5C615F24CE29} Adobe WinSoft Linguistics Plugin CS6 1.3.0.0 -----------
    ERROR: DF024: Unable to preserve original file at "C:\Program Files (x86)\Common Files\Adobe\Linguistics\6.0\Providers\Plugins2\WRLiloPlugin1.3\\CNSWin_MacEnc.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 3)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 3)
    ----------- Payload: {7CA3FAD4-7B82-473C-8207-5A283E90742A} Adobe WinSoft Linguistics Plugin CS6 x64 1.3.0.0 -----------
    ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\Linguistics\6.0\Providers\Plugins2\WRLiloPlugin1.3\\MORPHLibs.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 13)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 13)
    ----------- Payload: {C41A769E-27ED-44F7-8A11-F2E32F538E05} Adobe Linguistics CS6 x64 6.0.0.0 -----------
    ERROR: DF024: Unable to preserve original file at "C:\Program Files\Common Files\Adobe\Linguistics\6.0\UserDictionaryMigrationTool\AdobeLinguistic.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 453)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 453)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Bridge CS6 (64 Bit): Install failed
    ERROR: DW050:  - Adobe Player for Embedding 3.3: Install failed
    ERROR: DW050:  - Adobe CSXS Infrastructure CS6: Install failed
    ERROR: DW050:  - Adobe WinSoft Linguistics Plugin CS6 x64: Install failed
    ERROR: DW050:  - Adobe Extension Manager CS6: Install failed
    ERROR: DW050:  - Adobe Player for Embedding x64 3.3: Install failed
    ERROR: DW050:  - Adobe WinSoft Linguistics Plugin CS6: Install failed
    ERROR: DW050:  - Adobe Bridge CS6: Install failed
    ERROR: DW050:  - Adobe Linguistics CS6 x64: Install failed
    ERROR: DW050:  - DynamiclinkSupport: Install failed
    ERROR: DW050:  - Adobe ExtendScript Toolkit CS6: Install failed
    Please search the above error/warning string(s) to find when the error occurred.
    These errors resulted in installer Exit Code mentioned below.
    [    6436] Tue Aug 21 16:53:37 2012  INFO
    Exit Code: 6 - Silent workflow completed with errors.
    Please see specific errors and warnings for troubleshooting. For example, ERROR: DF024, DW063 ...
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    END - Installer Session
    *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
    From what I can tell from the start menu they do show all of these being installed with short cuts on the start menu.

  • Error Code: U43M1D207 Photoshop (CS6) Update Windows 7

    After running Adobe Updater, on CS6 Premium, I get the above error.
    Downloading is fine, but fails to install with the above error.
    I cannot see any current recommendations to correct this situation.
    I have re-downloaded, and also ran with AV etc, disabled.
    Please advise why error occurs, and also corrective action required.
    Thanks

    I did it already. but im still getting the error. this is starting to get anoying. I need Photoshop cs6 for my work. isnt there another way to fix it? Please.
    Regards

  • Much happier with CC (vs CS6)

    Just wanted to let Adobe folk know the CC release has vastly improved my editing work over CS6, and I'm far more productive. Not due to new features as due to bug fixes. I'd take a bug fix over feature any day.
    - 100s of error messages when opening PrProj file using Wave Stabilizer no longer appear. This kept me from using Render Queue (same errors would appear) instead of Render Export, which kept me from multitasking a render with editing. Also it was unnerving.
    - Pre-rendering of audio. It seemed like dozens of things might trigger this, and it was ultimately inevitable if I worked on a project long enough. I still occasionally need to wait for pre-rending of audio, but it takes less time and is far less frequent. It seems like a reasonable mild annoyance, not one that makes me wonder what the hell is going on.
    - 1/3 of my PC's memory has been freed up. I do not know why, but I'm glad to see it as I was headed towards running out of memory (again) on a recently upgraded machine packing 64GB RAM.
    Thanks for improving PPro. It is now what I was hoping for when I switched from Sony Vegas at the start of 2013.

    Gordon James McDowell wrote:
    I wasn't trying to be snarky, but yes re-reading it... anyway I am VERY happy with the post-CS6 updates.
    He was referring to me.

  • Odd Error with decode function in Order By Clause

    I am trying to compile a procedure and can't get around an error with a dynamic order by that doesn't make much sense to me. I can repoduce the error with a plain select statment in sql plus so I can rule out a declaration error. Here is an example with 2 numeric columns and a date column.
    select task_id, display_date, remark_id from task_list
    where task_id > 1000
    order by decode('Task_ID', 'Task_ID',Task_ID, 'Display_Date', Display_Date, 'Remark_ID',Remark_ID)
    returns the error:
    select task_id, display_date, remark_id from task_list
    ERROR at line 1:
    ORA-00932: inconsistent datatypes: expected NUMBER got DATE
    I'm not sure why this error is occuring, because it doesn't even hit the Display_Date field in the Decode statment. If I take the Display_date out of the statement, it runs properly. If I change Display_Date to To_Char(Display_Date) it also runs fine, but the sorting is incorrect. Also I'm running 9.2, and do not want to use dynamic sql to build my query. Any Ideas out there as to the cause of this error?

    I did find a workaround to this issue by breaking the decode statment into three separate statement, but I still think that the way it is written above should work, and may be a bug, or an error that I don't understand fully.
    The Order by was rewritten like this:
    order by decode(pSort, 'Task_ID',Task_ID), decode(pSort, 'Display_Date', Display_Date),
    decode(pSort, 'Remark_ID',Remark_ID);
    Thanks

  • I have a problem with my photoshop CS6 retina display

    I have a problem with my photoshop CS6 retina display. my photoshop doesn't support retina on my Macbook pro 15 retina. the version I have in my laptop is 13.0v. I was trying to update to 13.1 from my photoshop through > help > update but this option is off. it is appear gray color. I couldn't click on it. please help me.

    Mac Perpetual CS6 current version is 13.0.6 the subscription version is version 13.1.2.  How are you trying to update to 13.1.?? do you have a Creative Cloud Subscription?
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • Errors with Time Machine (not completing backup, and needing to erase the ".inProgress" package)

    I have in a previous discussion been talking about errors with my Time Machine backup.  The errors were with a problem with Indexing a file, it fails and stops the whole backup.  Each time it attemps another backup, it fills my ".inProgress" package with a (nearly) whole backup, filling my Time Machine hard drive, and thus errasing my previous good backups.  The error occurs after about 95% completion.
    In my last post of a similar disscussion, the problem was indexing the Preference Pane files and this caused the whole backup to fail.  This was my last post there:  (below in some additional info of my situation)
    I did exclude the MobileMe.prefPane.  And I got:
    12/16/11 9:24:50.468 PM com.apple.backupd: Starting standard backup
    12/16/11 9:24:50.556 PM com.apple.backupd: Backing up to: /Volumes/3 TB GoFlex Drive/Backups.backupdb
    12/16/11 9:25:14.418 PM com.apple.backupd: Waiting for index to be ready (101)
    12/16/11 9:27:02.366 PM com.apple.backupd: Deep event scan at path:/ reason:must scan subdirs|
    12/16/11 9:27:02.366 PM com.apple.backupd: Finished scan
    12/16/11 9:33:37.119 PM com.apple.backupd: Deep event scan at path:/Volumes/Mac OS Lion GM reason:must scan subdirs|
    12/16/11 9:33:37.119 PM com.apple.backupd: Finished scan
    12/16/11 9:36:15.650 PM com.apple.backupd: 758.92 GB required (including padding), 830.32 GB available
    12/16/11 10:25:14.873 PM com.apple.backupd: Copied 22.8 GB of 630.5 GB, 782749 of 2357620 items
    12/16/11 11:25:15.335 PM com.apple.backupd: Copied 86.6 GB of 630.5 GB, 1167675 of 2357620 items
    12/17/11 12:25:16.227 AM com.apple.backupd: Copied 152.2 GB of 630.5 GB, 1393795 of 2357620 items
    Dec 17 01:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 305.2 GB of 630.5 GB, 1413946 of 2357620 items
    Dec 17 02:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 457.1 GB of 630.5 GB, 1419190 of 2357620 items
    Dec 17 03:19:07 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 1736865 files (568.3 GB) from volume Macintosh HD.
    Dec 17 03:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 572.1 GB of 630.5 GB, 1848939 of 2357620 items
    Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Indexing a file failed. Returned 200 for: /Volumes/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane, /Volumes/3 TB GoFlex Drive/Backups.backupdb/Tom iMac/2011-12-14-171406.inProgress/7DB524DD-EFB9-42A6-8A21-0A2A312EDA6D/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane
    Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Aborting backup because indexing a file failed.
    Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Stopping backup.
    Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 2164998 files (581.1 GB) from volume Mac OS Lion GM.
    Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copy stage failed with error:11
    Dec 17 03:40:50 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Backup failed with error: 11
    This time it was the Mouse.prefPane that caused the error.  I'd like to exclude the entire PreferencePanes directory.
    This was my error message this time:
    I just realized this was on my small Developers partition.  Perhaps there is an error with the build, OR an error with the initial restore.  I'd like to perhaps exclude the entire /Volumes/Mac OS Lion GM.  I expect that Time Machine is working fine with my main partition and the error happens when it's almost done with the Mac OS Lion GM partition.
    The problem now is that I only have 265 GB of 3 TB available on my Time Machine HDD.  If attempt another backup, it'll surely erase about 410 GB of my past saved backups.  I've already lost 6 months, and I only have two months left of backups.  I need to erase the ".inProgress" package again.  That'll take time, and it's impossible to do from this main partition, even at root access.  This ".inProgress" has a total of two (nearly) full backups; it didn't cleanup the first full backup attempt while starting the second,perhaps it would have had it finished.  But I fear even if I exclude the whole "Mac OS Lion GM" partition,  It'll create a third full backup before cleanup and erase ~400 GB of previous good backups.  Then, I'll have a total of 4 (nearly) full backups!  3 TB is just enough without any past backups.
    Maybe I'll just copy my documentations of my 'errasing the ".inProgress" package'  last time (from the Mac OS Lion GM partition) and do a full restore of just that partition.  Thus erasing the errors all together.  If it doesn't fix the errors then this could be a bug in the build that doesn't allow Time Machine to work.  I've always included this partition in Time Machine before, even with other Lion builds, so I suspect that it was an error in the initial restore.  (I may be answering my own questions, and that the inital restore (of the small partition) is the problem, and I just need to re-restore the small partition)
    Again, I'm going to have to erase the ".inProgress" file to regain 1.53 TB of space before proceeding.
    Also, I gave myself permission to read the ".Backup.345781513.887697.log", the log that was created last night when I first started Time Machine this last time.  It was interesting, but didn't show the error I could see from the console.
    Right now, mds and mdworker appear to be going crazy even after I just now turned off Time Machine.  I think I'll let it go for the rest of the night.  Then I'll work on erasing the ".inProgress" package from the other partition boot up.
    That was my entire last post.  To add some information, I have two OS X partitons, both Mac OS X Lion.  One is my large main partition, the other is one I don't mind testing with.  I recently replaced my internal hard drive in my iMac and restored from Time Machine both partitions.  This appeared to go smoothly.  But I have yet to create a single successful Time Machine backup since.  At first it was doing a Full Backup, which I didn't like, but now it just aborts around 95% completion.  Each, time, it tries it fills the Time Machine hard drive with duplicate (nearly) full backups errasing my older good backups.  I would like to erase the ".inProgress" file to save space.
    My main question in this new discussion is does anyone know of a good way of erasing the ".inProgress" file? This is so I can preseerve my previous backups.  ACLs and other permissions seem to make it impossible to erase from this startup partition, the one I'm running Time Machine from.  Even at root level, if I give myself permission to change permissions or delete a file, it'll say Operation not Permitted instead of Permission Denied.  I have been able to delete this ".inProgress" package before when booting from the other  partition, but with great difficulty.  I have had much help from another Member in this Support Community when it comes to solving my Time Machine problems.  I think I have found the problem (indexing files in my small OS X partition), as stated in my copy& pasted post above, but I really need to delete this inProgress package first to save space before continuing!

    Pondini wrote:
    Gator TPK wrote:
    Now I'll have to fix the small partition?  How's the best way to do this?  There could be thousands of files that won't index fine.
    See if there's anything you haven't done, that applies, in the pink box of #C3 in Time Machine - Troubleshooting
    Otherwise, since most (or all?) of the indexing errors are in OSX, you might want to just reinstall it.  Something may have gone wrong sometime, that damaged those files.
    I reviewed #C3 in Time Machine - Troubleshooting and I have already done most of those things.  I have just learned something new though:
    When I included my Main OS X partition again, I got an indexing error for the first time for that partition.  I might be interesting to note that the _spotlight process was running, and it's running again (the magnifying glass has a dot and it generically says "Indexing Tom's iMac").  mdworker, mds and backupd processes really are working hard, one moment they used over 500% of my CPU.  It's nice to know for once quad core is good for something other than video encoding.  (Now if they could just get the Finder to do more than 100.1%, only 1 thread is doing 100%, I'd like to see file size calculations 8 times quicker!)
    I never got an indexing error once in the past 2 weeks for that large Mac OS X v10.7.2 main volume, and it had appeared to finish that partition backup before running into problems with my smaller test partition.  Also, I had just updated the smaller test partition with a later build of Mac OS X.  But It appears that the beta builds are clearly not the problem.  I thought I could just restore again (from the December 4th backup) the small partition and both would be fine.
    I'll finish reviewing all the suggestions on Time Machine - Troubleshooting and go from there.  Hopefully, the _spotlight indexing simutaniously was the only problem.  It's strange that the indexing hasn't happened since the original restore last week untill I finally got a good clean complete partial Time Machine backup.  Why would the first Time Machine backup trigger indexing again?
    For now, I'm going to exclude the Main Partition again, and let another good backup run.  And try your suggestions.  (And wait till mds, mdworker, etc. to finish!)
    I have the logs of the first two sucsessful backups and the last two failed backups from the last 3 hours, if that would help.?

  • Error with PL/SQL block

    Hi
    If I run PL/SQL block
    DECLARE
    CURSOR C1 is SELECT CLM_CASE_NO FROM CLAIM_OBJECT.CLM_INVLVD_PRTY_T where CLM_CASE_NO=XXXX;
    BEGIN
    FOR X in C1 loop
    INSERT INTO POSTL_ADDRS_ARCHIVE P (SELECT A.* FROM CLAIM_OBJECT.POSTL_ADDRS A, CLAIM_OBJECT.CLM_INVLVD_PRTY_T C WHERE
    C.CLNT_NO = A.CLNT_NO AND C.CURR_ROW_IND='A' AND C.CLM_CASE_NO =X.CLM_CASE_NO );
    end loop;
    end;
    there is no error with the above block
    If I remove where clause in cursor and run block
    DECLARE
    CURSOR C1 is SELECT CLM_CASE_NO FROM CLAIM_OBJECT.CLM_INVLVD_PRTY_T;
    BEGIN
    FOR X in C1 loop
    INSERT INTO POSTL_ADDRS_ARCHIVE P (SELECT A.* FROM CLAIM_OBJECT.POSTL_ADDRS A, CLAIM_OBJECT.CLM_INVLVD_PRTY_T C WHERE
    C.CLNT_NO = A.CLNT_NO AND C.CURR_ROW_IND='A' AND C.CLM_CASE_NO =X.CLM_CASE_NO );
    end loop;
    end;
    ERROR at line 1:
    ORA-01013: user requested cancel of current operation
    ORA-06512: at line 12
    I searched for ORA-06512
    Cause:
         This error message indicates the line number in the PLSQL code that the error resulted.
    SELECT CLM_CASE_NO FROM CLAIM_OBJECT.CLM_INVLVD_PRTY_T has over 800,672 records.
    SELECT CLM_CASE_NO FROM CLAIM_OBJECT.CLM_INVLVD_PRTY_T where CLM_CASE_NO=XXXX; has 2 records.
    I am not not understanding why block 2 is throwing error (with no where clause in cursor)
    Any help will be greatly appreciated
    Thanks in advance

    As the error message indicates clearly the process was cancelled as you pressed CTRL+C. And yes you can’t see any data you insert in one session from other session until it gets committed. And as others have mentioned row by row operation is very expensive think about revising your approach.
    Instead of having a cursor why don’t you join it directly in you select in the insert statement and try?
    Thanks,
    Karthick.
    Message was edited by:
    karthick_arp

  • Error message in Bridge CS6 -- how to fix?

    I'm getting an error message in Bridge CS6.
    I'm trying to create a Journal with Filmstrip with 42 items.  The creation process stops after several photos -- 32 last time -- and I get an error messgae saying "Gallery creation stopped because of unknown error - sorry." 
    Any idea how to troubleshoot this?

    While having very less experience with Web Gallery I used Bridge CC (same output module as CS6) to create one with 42 files in a journal with filmstrip without problems
    The preview only is capable of showing 20 max but saving the file to my drive I had no problem viewing it in my browser with all 42 files.
    I have a Mac with OSX 10.8 and Bridge CC
    Can you provide more details about your set up?
    Did it work before?
    Are all the files able t pen and view in PS, are they not to big, what file type and size are you using?

  • Error: Can't install CS6 PS , Exit Code:6, Error: DW050

    Hey i'm running an mac(intel) with OS x 10.7 Lion on it.
    Everytime I tryed to install CS 6 Photoshop the installer froze.
    I cleaned my mac with the cs cleaner tool and tryed to install Photoshop in security mode but following error occurred:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 35 error(s), 0 warning(s)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Linguistics CS6: Install failed
    ERROR: DW050:  - Dynamic Link Media Server: Install failed
    ERROR: DW050:  - AdobeColorCommonSetCMYK CS6: Install failed
    ERROR: DW050:  - Adobe XMP Panels: Install failed
    ERROR: DW050:  - Suite Shared Configuration CS6: Install failed
    ERROR: DW050:  - Adobe Player for Embedding 3.3: Install failed
    ERROR: DW050:  - AdobeColorJA CS6: Install failed
    ERROR: DW050:  - Required Common Fonts Installation: Install failed
    ERROR: DW050:  - PDF Settings CS6: Install failed
    ERROR: DW050:  - AdobeColorPhotoshop CS6: Install failed
    ERROR: DW050:  - Adobe Utilities CS6: Install failed
    ERROR: DW050:  - Adobe SwitchBoard 2.0: Install failed
    ERROR: DW050:  - AdobeColorEU CS6: Install failed
    ERROR: DW050:  - Camera Profiles Installer: Install failed
    ERROR: DW050:  - AdobePDFL CS6: Install failed
    ERROR: DW050:  - Adobe Photoshop CS6 English Language Pack_AdobePhotoshop13-en_US: Install failed
    ERROR: DW050:  - AdobeColorVideoProfilesCS CS6: Install failed
    ERROR: DW050:  - PDF Settings CS5: Install failed
    ERROR: DW050:  - Adobe ExtendScript Toolkit CS6: Install failed
    ERROR: DW050:  - AdobeTypeSupport CS6: Install failed
    ERROR: DW050:  - Adobe WinSoft Linguistics Plugin CS6: Install failed
    ERROR: DW050:  - Adobe Photoshop CS6 Support: Install failed
    ERROR: DW050:  - Adobe Extension Manager CS6: Install failed
    ERROR: DW050:  - Adobe Hunspell Linguistics Plugin CS6: Install failed
    ERROR: DW050:  - Adobe Mini Bridge CS6: Install failed
    ERROR: DW050:  - AdobeColorNA CS6: Install failed
    ERROR: DW050:  - AdobeColorCommonSetRGB CS6: Install failed
    ERROR: DW050:  - Photoshop Camera Raw 7: Install failed
    ERROR: DW050:  - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure
    ERROR: DW050:  - Recommended Common Fonts Installation: Install failed
    ERROR: DW050:  - DynamiclinkSupport: Install failed
    ERROR: DW050:  - AdobeCMaps CS6: Install failed
    ERROR: DW050:  - Adobe CSXS Extensions CS6: Install failed
    ERROR: DW050:  - Adobe Bridge CS6: Install failed
    ERROR: DW050:  - Adobe CSXS Infrastructure CS6: Install failed
    Do you have any ideas?

    On Windows 7, 64 bit, with the Beta 64 bit version of Photoshop CS6...
    I got this error after installation (20th of April):
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Microsoft Visual C++ 2008 Redistributable Package (x64): Install failed
    ERROR: DW050:  - Microsoft Visual C++ 2008 Redistributable Package (x86): Install failed
    ERROR: DW050:  - Microsoft Visual C++ 2010 Redistributable Package (x64): Install failed
    ERROR: DW050:  - Microsoft Visual C++ 2010 Redistributable Package (x86): Install failed
    I followed the advice to run the set-up.ex "as admin" - but same problem.
    If I load these packages from Microsoft - the installation is interrupted at once with a certificate-error.
    This problem (I guess) causes the following error message to promt again and again while I wirte this: "CS6 Servide Manager.exe: The program could not start correctly (0xc000007b), Click Ok to close the program."
    Best regards,
    Eigil
    21st of April:
    ..and this new error is received, even before CS6 is started on the computer: "CS6 Service Manager.exe: The program cannot be started, as MSVCP100.dll is missing on the computer. Try to reinstall to solve the problem."
    (have tried to reinstall - same problem).
    These problems are severe, as they are interrupting all tests and (even the writing in this forum, i.e. the message returns each 10th-30th second demanding an OK to be cleared).

  • Error when installing Dreamweaver CS6 from Master Collection on Mac OS 10.7.1 or 10.6.8

    Full error log at <http://pastebin.com/r208XaqY>
    Short error message below
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DF027, DW063 ... WARNING: DW065 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 1 warning(s)
    WARNING: DW065: Display requirements not met for {8ACD4814-788B-11E1-AC70-A860A781E0D9} Adobe Dreamweaver CS6 12.0.0.0
    ----------- Payload: {8ACD4814-788B-11E1-AC70-A860A781E0D9} Adobe Dreamweaver CS6 12.0.0.0 -----------
    ERROR: DF027: Unable to copy file from "/private/tmp/.tempdirarpAhfff/Assets1/Adobe Dreamweaver CS6.app/Contents/Resources/SharedImages/904.png" to "/Applications/ThirdParty/Adobe Dreamweaver CS6/Adobe Dreamweaver CS6.app/Contents/Resources/SharedImages/904.png" (Seq 1746)
    ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1746)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Dreamweaver CS6_AdobeDreamweaver12en_USLanguagePack: Install failed
    ERROR: DW050:  - Adobe Dreamweaver CS6: Failed due to Language Pack installation failure
    I have tried installing both from a standard account and from an admin account. The same error occurs each time.

    Hi Michael,
    The final issue I mentioned is not with the installation but with the first launch.
    My solution was to:
    Open System Preferences at the Accounts pane
    Click on the Lock icon in order to make changes, and enter an admin user name and password.
    Select the standard user account that is to use Dreamweaver
    Check the Allow User To Administer This Computer checkbox
    Reboot the computer
    Launch Dreamweaver from the user's account (now with admin privileges)
    Dreamweaver does whatever it is that it needs admin privileges for
    Repeat steps 1 to 3
    Uncheck the Allow User To Administer This Computer checkbox, so that the user goes back to a standard account
    Reboot the computer
    Dreamweaver will now launch happily from the chosen user's standard account.
    I imagine that it would not take a whole morning to fix Dreamweaver CS6 so that it throws up a "Please give me temporary Admin privileges" dialog on first launch. It might also not take that much longer to do whatever it is that it has to do on first launch in a folder where admin privileges are not required.
    This would save hours of frustration on the part each of the thousands of end users who are likely to encounter these symptoms.

  • How do I rectify error messages when installing CS6 extended?

    Running on a windows 7 platform 64 bit machine.  errors during install of CS6 extended.  Did not delete CS5 extended prior to install because had no directions to do so.   Exit code 6.  1st  3 errors listed as DF037 and involve being unable to delete directories related to CameraRaw (error 145)
    Next error is #1310  and relates to an installer file 3100b11b.msi .  Evidently I don't have access to this directory even though I am the administrator. error 1310 and error DW050 installtion of PDF settings CS6 install failed.
    What can I do to get a clean install with no errors?

    Have you had a chance to analyze my crash log yet?  I have discovered another problem in working with CS6 that seems to be a holdover from problems with CS5.  Occasionally when I use a tool, the image will disappear completely.  For example, tonight while working with the patch tool, when I held down the mouse to select the patch area, the image disappeared which meant that I could not see what I was trying select.  This also happened with the crop tool.  My usual method of dealing with this is to close the program and reopen it, but I think it should never happen at all.   Very frustrating and time consuming.  If you could shed some light on this, it would help me a lot.  Margaret Henderson

  • B2B-51566 Description: Parse stream error with RosettaNet 1.1

    Hi
    Need help with the following error message
    B2B-51566 Parse stream error
    We have a trading partner set up to use RosettaNet 1.1 protocol and we are getting 51566 error. We are NOT experiencing this error with a trading partner who is in RosettaNet 2.0
    we are currently patched up to 11.1.1.5
    One thing I notice is when i go to the message and open the packed message i get this "Cannot display Packed Message in binary format."
    Here is the payload
    XMessage-ID: <[email protected]d.e2open.com>
    MIME-Version: 1.0
    Content-Type: multipart/related;
         boundary="----=_Part_176_29725195.1331307008851";
         type="Application/x-RosettaNet"
    Content-Description: This is the RosettaNet Business Message
    Content-ID: "-15059242:135f6ea5e3c:-62b9"
    ------=_Part_176_29725195.1331307008851
    Content-Type: Application/xml; rnsubtype=preamble-header; name=Preamble
    Content-Transfer-Encoding: binary
    Content-Disposition: attachment; filename=Preamble
    Content-ID: <[email protected]>
    Content-Description: This is the Preamble Header part of the Business Message
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE Preamble SYSTEM "PreamblePartMessageGuideline.dtd">
    <Preamble>
    <DateTimeStamp>20120309T153008.852Z</DateTimeStamp>
    <GlobalAdministeringAuthorityCode>RosettaNet</GlobalAdministeringAuthorityCode>
    <GlobalUsageCode>Production</GlobalUsageCode>
    <VersionIdentifier>1.1</VersionIdentifier>
    </Preamble>
    ------=_Part_176_29725195.1331307008851
    Content-Type: Application/xml; rnsubtype=service-header; name=ServiceHeader
    Content-Transfer-Encoding: binary
    Content-Disposition: attachment; filename=ServiceHeader
    Content-ID: <[email protected]>
    Content-Description: This is the Service Header part of the Business Message
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE ServiceHeader SYSTEM "ServiceHeaderPartMessageGuideline.dtd">
    <ServiceHeader>
    <ProcessControl>
    <ProcessIdentity>
    <description>
    <FreeFormText>NotNull</FreeFormText>
    </description>
    <GlobalProcessCode>Request Purchase Order</GlobalProcessCode>
    <GlobalProcessIndicatorCode>3A4</GlobalProcessIndicatorCode>
    <initiatingPartner>
    <GlobalBusinessIdentifier>007710825</GlobalBusinessIdentifier>
    </initiatingPartner>
    <InstanceIdentifier>PIPC0A85CB8135F814CB4200000EAFE56F0</InstanceIdentifier>
    <VersionIdentifier>V02.00</VersionIdentifier>
    </ProcessIdentity>
    <ServiceRoute>
    <fromService>
    <BusinessServiceDescription>
    <GlobalBusinessServiceCode>Seller Service</GlobalBusinessServiceCode>
    </BusinessServiceDescription>
    </fromService>
    <toService>
    <BusinessServiceDescription>
    <GlobalBusinessServiceCode>Buyer Service</GlobalBusinessServiceCode>
    </BusinessServiceDescription>
    </toService>
    </ServiceRoute>
    <TransactionControl>
    <AttemptCount>1</AttemptCount>
    <PartnerRoleRoute>
    <fromRole>
    <PartnerRoleDescription>
    <GlobalPartnerRoleClassificationCode>Seller</GlobalPartnerRoleClassificationCode>
    </PartnerRoleDescription>
    </fromRole>
    <toRole>
    <PartnerRoleDescription>
    <GlobalPartnerRoleClassificationCode>Buyer</GlobalPartnerRoleClassificationCode>
    </PartnerRoleDescription>
    </toRole>
    </PartnerRoleRoute>
    <TransactionIdentity>
    <GlobalTransactionCode>Request Purchase Order</GlobalTransactionCode>
    <InstanceIdentifier>TIC0A85CB8135F814CB4200000EAFE5700</InstanceIdentifier>
    </TransactionIdentity>
    <SignalControl>
    <inResponseTo>
    <ActionIdentity>
    <GlobalBusinessActionCode>Purchase Order Request Action</GlobalBusinessActionCode>
    <InstanceIdentifier>C0A85CB8135F814C33C00000EAFE5670</InstanceIdentifier>
    </ActionIdentity>
    </inResponseTo>
    <InstanceIdentifier>20120309T153008.882Z</InstanceIdentifier>
    <PartnerRoute>
    <fromPartner>
    <PartnerDescription>
    <BusinessDescription>
    <GlobalBusinessIdentifier>364132837</GlobalBusinessIdentifier>
    </BusinessDescription>
    <GlobalPartnerClassificationCode>null</GlobalPartnerClassificationCode>
    </PartnerDescription>
    </fromPartner>
    <toPartner>
    <PartnerDescription>
    <BusinessDescription>
    <GlobalBusinessIdentifier>007710825</GlobalBusinessIdentifier>
    </BusinessDescription>
    <GlobalPartnerClassificationCode>null</GlobalPartnerClassificationCode>
    </PartnerDescription>
    </toPartner>
    </PartnerRoute>
    <SignalIdentity>
    <GlobalBusinessSignalCode>Receipt Acknowledge</GlobalBusinessSignalCode>
    <VersionIdentifier>1.1</VersionIdentifier>
    </SignalIdentity>
    </SignalControl>
    </TransactionControl>
    </ProcessControl>
    </ServiceHeader>
    ------=_Part_176_29725195.1331307008851
    Content-Type: Application/xml; rnsubtype=service-content;
         name=ReceiptAcknowledgement
    Content-Transfer-Encoding: binary
    Content-Disposition: attachment; filename=ReceiptAcknowledgement
    Content-ID: <[email protected]>
    Content-Description: This is the Service Content part of the Business Message
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE ReceiptAcknowledgement SYSTEM "ReceiptAcknowledgementMessageGuideline.dtd">
    <ReceiptAcknowledgement>
    <fromRole>
    <PartnerRoleDescription>
    <ContactInformation>
    <contactName>
    <FreeFormText>E2open Support</FreeFormText>
    </contactName>
    <EmailAddress>[email protected]</EmailAddress>
    <telephoneNumber>
    <CommunicationsNumber>650-381-6000</CommunicationsNumber>
    </telephoneNumber>
    </ContactInformation>
    <GlobalPartnerRoleClassificationCode>Seller</GlobalPartnerRoleClassificationCode>
    <PartnerDescription>
    <BusinessDescription>
    <GlobalBusinessIdentifier>364132837</GlobalBusinessIdentifier>
    <GlobalSupplyChainCode>Information Technology</GlobalSupplyChainCode>
    </BusinessDescription>
    <GlobalPartnerClassificationCode>null</GlobalPartnerClassificationCode>
    </PartnerDescription>
    </PartnerRoleDescription>
    </fromRole>
    <receivedDocumentDateTime>
    <DateTimeStamp>20120309T153008.907Z</DateTimeStamp>
    </receivedDocumentDateTime>
    <receivedDocumentIdentifier>
    <ProprietaryDocumentIdentifier>337719</ProprietaryDocumentIdentifier>
    </receivedDocumentIdentifier>
    <thisMessageDateTime>
    <DateTimeStamp>20120309T153008.904Z</DateTimeStamp>
    </thisMessageDateTime>
    <thisMessageIdentifier>
    <ProprietaryMessageIdentifier>20120309T153008.905Z</ProprietaryMessageIdentifier>
    </thisMessageIdentifier>
    <toRole>
    <PartnerRoleDescription>
    <GlobalPartnerRoleClassificationCode>Buyer</GlobalPartnerRoleClassificationCode>
    <PartnerDescription>
    <BusinessDescription>
    <GlobalBusinessIdentifier>007710825</GlobalBusinessIdentifier>
    <GlobalSupplyChainCode>Information Technology</GlobalSupplyChainCode>
    </BusinessDescription>
    <GlobalPartnerClassificationCode>null</GlobalPartnerClassificationCode>
    </PartnerDescription>
    </PartnerRoleDescription>
    </toRole>
    </ReceiptAcknowledgement>
    ------=_Part_176_29725195.1331307008851--

    I do have SR but hoping i can get quicker answer hereYou may always escalate the SR if you are not getting response timely. Anyways, give the reference of this thread in the SR and ask service engineer to file a bug.
    I will email you the wire messageI saw the wire message you mailed across. There are some junk characters in the starting of the payload and that's why parsing is failing. Most probably it is a BOM (Byte Order Mark). Ask your TP to send messages in UTF-8 encoding without BOM or any other junk character in the starting of the message. You may open the wire message payload you mailed across in notepad or textpad and you will able to see those junk characters in the starting of the payload.
    Regards,
    Anuj

  • ACROBAT STARTUP SCRIPTING NOT WORKING (with extendscript Tooklkit CS6)

    Hi
    I experienced in programming, but newbie in JS-Scripting in CS6.
    I have developed some scripts in the console of Acrobat XI Pro, now I wan't to install that global script callable by a menu.
    I work on Windows-7, with 64bit:
    The script path is:
    C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Javascripts
    script name is Confg.js
    The script is created with Extendscript Tooklkit CS6 editor
    only contains this line:
    app.alert("Hi, from a globally executed script");
    I expect that an alert is poping up, when I open the Acrobat XI Pro with any PDF-File:
    for a change
    app.addMenuItem({cName:"Menu Test", cParent: "Help",   cExec: "app.alert('Menu Item Test'); "});
    doesn't work either
    after opening PDF XI Pro with an arbitry PDF I get an error in the console:
    Acrobat – Version mit integrierten EScript-Funktionen 11.0
    Acrobat SOAP 11.0
    SyntaxError: illegal character
    1:Folder-Level:App:Config.js
    If I create the file with a plain text editor, things will work fine, as expected.
    If I edit that clean file with Extendscript Tooklkit CS6 editor again the file is corrupted. This is rahter clumsy. Any solution, so I can work with Extendscript Tooklkit CS6 editor?

    Thanks for the reply.
    >>Acrobat is not one of listed programs that Extendscript is used with.
    I was already wondering about this. Thought my installation is corrupted or whatever
    Though with regret, I have to accept that Extendscript Toolkit can't be used with Acrobat XI scripting. I use jEdit meanwhile. This has syntax higlighting and a linenumbering, helpful to spot errorous linenumbers. This does the job so far.

Maybe you are looking for