Why export to EPS was removed from Flash CS4?

Hello.
I just installed evaluation of Flash CS4. I am confused that EPS support was removed. I need illustrations in EPS, because I use LaTeX.
It there workarounds to get an EPS file from a FLA file?

I am having an Identical issue. The help files show an ability to export to EPS 3.0, but there is absolutely no way to do this in Flash CS4 that I can see. For now, I downloaded the trial of illustrator to use as a work around. Interestingly, you have to export from flash as an *.ai file, open it in illustrator, and THEN save as EPS from illustrator. WWWW TTTTT FFFFF. Is adobe deteriorating? I can't even copy from flash and paste into Illustrator.
Perhaps adobe has some kind of explanation - but I doubt it.

Similar Messages

HT1977 How would I find out why a particular app, In-A-Visit, was removed from app Store?

How would I find out why a particular app, In-A-Visit, was removed from app Store?

Ask the app developer. Maybe they will tell you why... Apple will not disclose the reason to you unless you are the developer. It's entirely possible that the developer removed it.

Switch 2 was removed from stack unexpectedly and again joined stack

Hello,
we have 2 switches in stack, last night switch 2 was removed from stack and got rebooted and again it got back in stack.
Switch -2 entered into the provisioned mode for certain span of time. snap shot is attached .
Apr 9 02:36:25.266 IST: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has changed to state DOWN
Apr 9 02:36:25.837 IST: %STACKMGR-4-SWITCH_REMOVED: Switch 2 has been REMOVED from the stack
Apr 9 02:36:27.850 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/1, changed state to down
Apr 9 02:36:27.850 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/3, changed state to down
Apr 9 02:36:27.850 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/4, changed state to down
Apr 9 02:36:27.850 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to down
Apr 9 02:36:28.857 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/1, changed state to down
Apr 9 02:36:28.857 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/3, changed state to down
Apr 9 02:36:28.857 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/4, changed state to down
Apr 9 02:36:28.857 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to down
Apr 9 02:48:37.111 IST: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has changed to state UP
Apr 9 02:49:08.048 IST: %STACKMGR-4-SWITCH_ADDED: Switch 2 has been ADDED to the stack
Apr 9 02:49:20.170 IST: %STACKMGR-5-SWITCH_READY: Switch 2 is READY
Apr 9 02:49:20.170 IST: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 2 has changed to state DOWN
Apr 9 02:49:20.170 IST: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 2 has changed to state UP
*Mar 1 00:01:02.738: %STACKMGR-4-SWITCH_ADDED: Switch 1 has been ADDED to the stack (Switch-2)
*Mar 1 00:01:02.738: %STACKMGR-4-SWITCH_ADDED: Switch 2 has been ADDED to the stack (Switch-2)
*Mar 1 00:01:07.024: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan (Switch-2)
*Apr 9 02:49:18.979 IST: %SYS-6-CLOCKUPDATE: System clock has been updated from 21:19:18 UTC Wed Apr 8 2015 to 02:49:18 IST Thu Apr 9 2015, configured from console by console. (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:19.382 IST: %SYS-5-CONFIG_I: Configured from memory by console (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:19.482 IST: %STACKMGR-5-SWITCH_READY: Switch 1 is READY (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:19.818 IST: %STACKMGR-5-MASTER_READY: Master Switch 1 is READY (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:20.053 IST: %STACKMGR-5-SWITCH_READY: Switch 2 is READY (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:20.178 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback99, changed state to up (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:20.178 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback999, changed state to up (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:20.321 IST: %SYS-5-RESTART: System restarted -- (Cochin-GMSC-SWTCH-2)
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2) (Cochin-GMSC-SWTCH-2)
Copyright (c) 1986-2008 by Cisco Systems, Inc. (Cochin-GMSC-SWTCH-2)
Compiled Thu 01-May-08 15:00 by antonino (Cochin-GMSC-SWTCH-2)
Apr 9 02:49:24.222 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/1, changed state to up
Apr 9 02:49:24.264 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/3, changed state to up
Apr 9 02:49:24.281 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/4, changed state to up
Apr 9 02:49:24.314 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to up
Apr 9 02:49:25.228 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/1, changed state to up
Apr 9 02:49:25.270 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/3, changed state to up
Apr 9 02:49:25.287 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/4, changed state to up
Apr 9 02:49:25.321 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to up
Apr 9 02:49:39.959 IST: %PLATFORM-6-MODULE_INSERTED: TwinGig Converter module inserted in slot 1 in Switch 2 (Cochin-GMSC-SWTCH-2)
Apr 9 02:49:42.106 IST: %PLATFORM-6-MODULE_INSERTED: TwinGig Converter module inserted in slot 2 in Switch 2 (Cochin-GMSC-SWTCH-2)
Switch 02
Switch Uptime : 5 hours, 38 minutes
Base ethernet MAC Address : 00:23:04:19:9A:00
Motherboard assembly number : 73-10313-11
Motherboard serial number : FDO12320AH4
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750E-24TD-SD
Daughterboard assembly number : 800-28590-01
Daughterboard serial number : FDO123305QU
System serial number : FDO1234V07K
Top assembly part number : 800-28443-01
Top assembly revision number : A0
Version ID : V01
CLEI Code Number : COMVC00ARA
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 01-May-08 15:00 by antonino
Image text-base: 0x00003000, data-base: 0x02000000
Please help to find reason behind this unexpected reboot.
Regards
Jatinder

what is use of session 2 command ,is this service impacting command
sh ver
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 01-May-08 15:00 by antonino
Image text-base: 0x00003000, data-base: 0x02000000
ROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750E-HBOOT-M) Version 12.2(35r)SE1, RELEASE SOFTWARE (fc2)
******* uptime is 11 weeks, 2 days, 8 hours, 40 minutes
System returned to ROM by power-on
System restarted at 01:41:48 IST Wed Jan 21 2015
System image file is "flash:c3750e-universalk9-mz.122-44.SE2/c3750e-universalk9-mz.122-44.SE2.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
cisco WS-C3750E-24TD (PowerPC405) processor (revision A0) with 0K/16376K bytes of memory.
Processor board ID FDO1234V07J
Last reset from power-on
3 Virtual Ethernet interfaces
1 FastEthernet interface
56 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:22:BE:95:35:80
Motherboard assembly number : 73-10313-11
Motherboard serial number : FDO12340H8F
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750E-24TD-SD
Daughterboard assembly number : 800-28590-01
Daughterboard serial number : FDO123305LA
System serial number : FDO1234V07J
Top Assembly Part Number : 800-28443-01
Top Assembly Revision Number : A0
Version ID : V01
CLEI Code Number : COMVC00ARA
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
* 1 30 WS-C3750E-24TD 12.2(44)SE2 C3750E-UNIVERSALK9-M
2 30 WS-C3750E-24TD 12.2(44)SE2 C3750E-UNIVERSALK9-M
Switch 02
Switch Uptime : 1 day, 7 hours, 35 minutes
Base ethernet MAC Address : 00:23:04:19:9A:00
Motherboard assembly number : 73-10313-11
Motherboard serial number : FDO12320AH4
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750E-24TD-SD
Daughterboard assembly number : 800-28590-01
Daughterboard serial number : FDO123305QU
System serial number : FDO1234V07K
Top assembly part number : 800-28443-01
Top assembly revision number : A0
Version ID : V01
CLEI Code Number : COMVC00ARA
License Level : ipbase
License Type : Permanent
Next reboot licensing Level : ipbase
Configuration register is 0xF

"no access to the digital certificate" - Trying to export my first iOS app from Flash - Help please

Hello
I'm trying to export my first iOS app from flash to my desktop / on the device (Flash Pro CC, Iphone5)
I followed the instructions on the adobe website to build an air app for iOS but on the last step it
doesn't export the app.
What I've done so far:
- Apple developer account
- creating the certificate + convert it to .p12
- app ID / Name etc.
- creating the provisioning profile from apple
- iOS Air app in flash (Only Text "Hello world" with a tween)
Now i have to load the certificates into Flash & enter a password (is it the password that
i entered in the certificate or from my developer account/ Apple ID password? Both didn't work at the end)
When i klick on publish in the last step than it loads a while but then i get the Error:
"no access to the digital certificate"
What is wrong? Can you help me please.

Also, I should say, when I go into my phone on the computer and try to install an app, I get this message:
Unable to start operation. Installer is already in use.
Any ideas

My MacBook Pro died suddenly when I was removing a flash drive (LG up3 neon ps4) and is now both unresponsive and unchargable. Is there anything I can do to fix it on my own? (There aren't any apple stores in my current country)

My MacBook Pro died suddenly when I was removing a flash drive (LG up3 neon ps4) and is now both unresponsive and cannot be charged. Troubleshooting.... Is there anything I can do to fix it on my own? (There aren't any apple stores in my current country)

Hello antol1n1,
Sorry to hear your MacBook Pro is not charging or powering on. Sometimes a System Management Controller reset can help with the following charging and power issues:
Power
The computer doesn't respond to the power button when pressed.
A portable Mac doesn't appear to respond properly when you close or open the lid.
The computer sleeps or shuts down unexpectedly.
The battery does not appear to be charging properly.
The MagSafe power adaptor LED doesn't appear to indicate the correct activity.
To reset the System Management Controller on your MacBook Pro (with a built-in battery) , you can follow these steps:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find more information in the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
I hope this helps!
Best,
Sheila M.

IMovie was removed from my macbook pro after I downloaded OS X Yosemite, I had it before and have used it, but now I can only get it through the app store

iMovie was removed from my macbook pro after I downloaded OS X Yosemite, I had it before and have used it, but now I can only get it through the app store. I can't pay for it so I would really appreciate the help.

Look in your applications folder for the installer - Install OS X Yosemite. Delete it. Then go back to the App Store purchases tab and see if you can download it. You might have to re-index Spotlight.
Spotlight – Re-index

CCMS Alerts keep coming for the system which was removed from System Monito

Hello SOLMAN Experts,
Iu2019ve noticed quite strange behavior of my SOLMAN CCMS Alerts: CCMS Alerts keep coming for the system which was removed from the System Monitoring.
Have you ever experienced this?
Please advice
Thank you
123

Hi 123,
Please ensure that autoreaction methods are deleted for those systems.
You can verify system to autoreaction method assigments via RZ21 --> Technical Infrastructure --> Configure Central system -->Assign Central Autoreaction
also check if that system is appearing as online as follows
RZ21-> Topology --> system overview --> Monitored and Remote SAP systems
if yes , make it offline to stop triggering alerts.
I hope this information will help you.
Thanks,
Rupali

Is it possible to know when the sim card was removed from iPhone after been stolen?

My iphone got stolen and I could see that my ipad got trouble with itunes and icloud. Is it possible to know when the sim card was removed from iphone?

no,

My user was removed from the wheel group automatically.

On the second day after doing a system update (which installed Gnome 3) I noticed that my user was removed from the wheel group. Any idea what did it?

Hmmm.. actually the only thing I did was turn on auto-login as my non-root user in System settings->User Accounts after unlocking it (the prompt asks for root pass). I'm not sure if that was before or after this happened though.
I haven't changed any group related settings since almost a year ago. It seems a little odd that this happened. Not a big deal though, since I re-added my user to the wheel group, but I'd still like to know how and what changed it.

Warning: The disabled test "SomeTest" was removed from the test run.

Hello,
When I mark test with Ignore attribute, mstest show the next message: Warning: The disabled test "SomeTest" was removed from the test run. And I don't want to see this warning.
The question is: Is there any option to hide this warning, turn it off.
Sincerely,
Alex

Hi Alex,
I think I could repro this issue. For the Ignore attribute, it would share us this warning message by design when we run it in MsTest.exe.
You could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio.
The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Why is week calendar hd removed from appstore

Why is the app Week Calender removed from the Appstore?
As an user I feel quite frustrated that this great app is removed from the appstore. First I pay for this app and now it is removed, so there will be no future updates anymore. It is a shame Apple did this!
So please put it back in the Appstore, so I can receive future updates.

I used the express lane and wrote:
I want to complain I cannot use Week Calendar HD on my iPad since the introduction of iOS5. Apple has not the right to prevent me from working with an app I bought via the appstore. So Apple must make it possible for me to work with Week Calendar HD again. And since it is such a great app, it must be in the appstore again, so I can get updates on this app in the future.
The answer from Apple was not very satisfying, especially the last sentence :
I understand when you try to use the application Week Calendar HD with iOS 5 that it does not function.
This application is not yet compatible with iOS 5 and seems to be exhibiting this issue due to its incompatibility.
If there is not an update available for the application, the application's developer may be able to give you an estimated date for when they intend to create a version compatible with iOS 4. Here is their contact information:
Utilitap
http://www.utilitap.com/weekcalendarhd
Please note that it is not possible to downgrade your device to an older version of iOS.
I hope you find this information helpful. If you have any additional questions or concerns regarding the iTunes Store or Mac App Store please feel free to contact us again. We love to help!
To be continued...

Why's my podcast been removed from the iTMS?

I've set up a college podcast, called edPod, and we've so far recorded only a preview episode. Being the eager beaver I am, I submitted my feed to the iTunes Music Store.
Within a few hours, I had received an email from '[email protected]', saying the following:
"This is to inform you that your podcast has been removed from the iTunes Music Store because of a technical problem with your feed.
If your problem can be resolved, you can fix it in your RSS feed, and then re-publish your podcast to the Music Store."
That would be fine... if I knew what was wrong with my feed! I've looked at the apple podcast feed guidelines (http://phobos.apple.com/static/iTunesRSS.html) - and I can't see anything 'abusive' about my feed compared to their example.
Maybe you've been through the same experience, and could lend a hand? My podcast feed is http://www.kedst.ac.uk/edpod/edpod.xml
I'm totally at a loss as to what's wrong with my feed. Can anyone help?
Thanks!
MadMacZed

Aha, that's helpful MacMuse!
However, I'm not too sure about why my feed is utf-8 while the server is ASCII. The college is in charge of the server, I just upload files to it! :P
I can see that the second line contains a "DTDs" rather than "dtds"... but since I use the application "Podcast Maker" to construct my rss feed - if I change the xml file on the server, will PodcastMaker overwrite it with the wrong information again the next time I update my feed? I suppose I will have to try it and find out! Also, Apple's own example has a capital DTDs... so surely that can't be the reason my podcast has been rejected?
Thanks again! I'll be back to tell you if it has worked or not!
MadMacZed

My podcast was removed from iTunes.

I rewrote my podcast description and without thinking I put in a swear word. I'm assuming that's why my podcast was removed. Now when I try to resubmit my feed it says that it's already been submitted. I just changed my podcast's name around 16:00. How long should I wait? Is there anything else I can do? Here's the show's feedhttp://changeofaddress.podbean.com/feed/ Thanks in advance for any help. My head is about to explode.

Waiting won't make any difference: you still haven't succeded in fooling it. You will need to make another slight change to the title, and if you can change the 'link' tag that might help. It would also help if you are able to change the feed URL but you may not have this option.
If all this fails, you could try emailing Support at podcasts 'at' apple.com though I can't promise you will get a helpful answer.

Export version 10 SWF file from Flash CC

Hello,
I am trying to work out how to export a version 10 SWF file from Flash CC. Every media agency I am supplying files to requires version 10 but I can only export a Flash Player 10.3 file which creates a version 12 SWF.
Does anyone have any advice other than buying an odler version of Flash....
Thanks for your time.
Keith

you can use flash cs 6. it's part of your cc subscription.
or you can add fp 10 to flash cc. here's a walk-through using fp 9: http://forums.adobe.com/message/5511080#5511080

The print driver for HP Laserjet 3380 that was print only was removed from my iMac, and now when try to download driver, it states to contact manufacturer. I have old driver on Time Machine, can I reinstall that old driver that worked?

The print driver for HP Laserjet 3380 was for print only, was removed and when I went to download from apple, it stated to contact manufacturer. I have old driver in Time Machine, how do I reinstall from Time Machine that driver that worked?

Hi,
Trible post. Please use:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-solution-center/m-p/4790405
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why export to EPS was removed from Flash CS4?

Similar Messages

Maybe you are looking for