Why FCE "forgets" the autoselected tracks ?

This is probably a minor problem, but I don't understand why whenever I paste a clip into a sequence I always have to first select the destination video and audio tracks with autoselect.
The point is that if I do not select the destination track with autoselect, paste always uses tracks V1, A1 and A2 even though V1, A1 and A2 are not marked as autoselect... It seems like FCE forgets the autoselected tracks after each paste operation...
Is this an FCE misbehaviour or am I missing something ?
Thanks
Piero

The current behavior is that copy and paste will default to same tracks the material comes from. If you copy from V1/A1/A2 that's where it will want to go to regardless of how the autoselect buttons are set. If you want to go to different tracks you have to click an autoselect button to disengage the default behavior.
This is sometimes a problem. You're copying from V1/A1/A2 and want to paste to V2/A3/A4. The latter tracks are already autoselected, but you did the copy, not by activating the autoselect tracks, but by manually selecting the clips. If you paste the clips they will go back to the tracks they came from even though the correct tracks are autoselected. You have to manually click on the autoselect buttons for video and audio, one of each, to tell the application to override the default behavior and use these settings instead.
It's come down to this compromise behavior after trying different behaviors, none very satisfactory.

Similar Messages

  • Why issues in the bug tracker are ignored?

    Almost 3 months ago I opened two ticket in Mojarra bug tracker.
    https://javaserverfaces.dev.java.net/issues/show_bug.cgi?id=1751
    https://javaserverfaces.dev.java.net/issues/show_bug.cgi?id=1752
    The first one is really important, it limits "redirect after post" pattern usage. I would use flash scope to keep operation status message across second GET request after initial POST request. But the flash scope is broken in RI :-( The issue was discussed on this forum also: http://forums.sun.com/thread.jspa?threadID=5445714.
    I'm wondering why the opened issue have been ignored for 3 months. The issue status is still unconfirmed, but all information required to reproduce the error was provided. I'm really worried about JSF future if the development team ignore the community.
    Fortunately there is a competitor, MyFaces ...
    Marcin

    Hi,
    My complaints about Mojarra team ignorance brought some effect :-) Today morning I got notification that Ed took ownership of
    https://javaserverfaces.dev.java.net/issues/show_bug.cgi?id=1751
    Thanks,
    Marcin

  • Motion TITLES into FCP / Why blocking out the video track?

    Perhaps it's because of a Studio upgrade? - But when I layer TITLES over a video track it blots it out with a black background.
    In other words, rather than see white titles over video, I only see white titles on black. I can reduce the opacity of the titles, and see picture. But that reduces the opacity of the video too....This is a new glitch...Any ideas why it's happening? - Thanks!
    G5   Mac OS X (10.0.x)  

    You're outputting titles made in Motion over video in FCP ... correct? If so, are you inadvertently adding a black background in Motion?
    -DH

  • Why doesn't the FedEx Tracking number data detector work in Mail anymore?

    Hi there,
      I'm running OS X 10.8.3 and Mail 6.3 (1503).  I had an email come in that had a FedEx Tracking Number.  The data detector picked it up and I was able to right-click and select "Track My Package".  Unfortunately there was a "Communication Error" in the pop-up window so it failed.  When I clicked 'Open in Safari" it worked!  Is anyone else having this issue?

    Yes, I can confirm it no longer works. My guess is that FedEx changed their site in some way that broke the lookup from within Mail. You do indeed have to open up Safari (or some other web browser) to track a package now.
    Regards.

  • Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.   Is th

    Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.
    Is there another way to adjust tempo of loops the faster way, any other technique?

    No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault.  And b) check the health of your RAM and the hard drive.
    The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording.

  • Why does CD Burning in iTunes 10.6 hang my system on the first track?

    I have iTunes 10.6.3.25 running on Windows 7.
    When I try to burn a playlist to a CD iTunes hangs on the first track.
    To stop the hang I have to shutdown my computer and unplug the external LG super multi-blue writer (BE06LU10)
    This used to work in previous version of iTunes.
    There is nothing wrong with my CD drive or OS since I am able to burn a CD using Power2Go software on the same system.
    It is more convenient to use iTunes since that is where my playlists are stored.

    Well unplugging the power to the external optical drive breaks the iTunes hang-up without having to re-boot.
    My question is why itunes consistently hangs while trying to write the first track to the CD?
    I deleted iTunes and re-installed but to no affect.
    I can burn CD with other software on my system so this must be an iTunes bug that needs to be fixed my Apple. Meanwhile, I will use other software.

  • I moved my iTunes Library and now the first track of most CDs is missing. Why? What can I do?

    I have moved my iTunes library several times. Sometimes to free up space on the main drive, I have moved the library to an external drive. I have also moved the library when changing drives and changing computers. I find that most of the CDs I have imported into iTunes in the past are now missing the first track. It shows the sign, but I haven't been able to locate them. In many cases, I have given the CDs themselves away and so I have no easy way of re-importing the tracks. Why does iTunes do this? Is there something I can do in the future to prevent this from happening? It gets rather tedious to go through hundreds of CD and locate a single track for each one after upgrading a drive or the computer. HELP?

    What process did you use for moving the library?
    I have noticed iTunes on rare occasions loses files.  Don't know why.  Keep back ups.  Before updating a backup run a script such as Dougscript List MIAs so you can make sure you aren't deleting your only copy should one get lost from your main drive.
    You might want to note that it is a mistake giving away the CDs.  When you no longer posess the CD you relinquish the right to keep a copy of the music. Also, as you are finding, you no longer have a backup source for the music.

  • Why does my ZTE open c Firefox OS smart phone forget the wlan settings and does not ring the alarm?

    Sometimes it is even enough to go outside to the waste bin to let my smartphone forget the settings for the wireless lan. When I return I have to enter the - not so short - code from my wlan router again. After that the internet connection is running as it should.
    Additionally the alarm clock does not work, I can set alarms as I like, setting the volume to the max and activate also the vibration alarm but nothing happens when the preset time is arrived, even when the alarm clock is shown on the screen the whole time. Is my phone broken? Or is it a bug in my Firefox OS installation?
    Where does Firefox OS store these values for wlan connection and alarm times? Is there an internal database that is maybe corrupted?

    Hi Markus,
    I understand that you're having issues with the Wi-Fi connection and the alarm clock in your ZTE Open C device.
    The alarm clock issue appears to be similar to what has been reported by other users and is being tracked on [https://bugzilla.mozilla.org/show_bug.cgi?id=1052245 bug 1052245].
    Do you have more information regarding the alarm clock issues that you encounter? This may be very helpful to our engineering teams investigating. Please be aware that ZTE is the manufacturer of your device, and only they are able to release an update.
    The wifi issue may be related to [https://bugzilla.mozilla.org/show_bug.cgi?id=923324 bug 923324].
    Please reply to this message with the following information:
    * What is the OS version and Build ID found in the Device Information page? Please visit [https://support.mozilla.org/en-US/kb/how-do-i-find-what-version-firefox-os-i-have this link] if you need help finding the Build ID of your phone.
    * Please provide the exact steps to reproduce the issue you are encountering.
    * How often do you encounter this issue?
    Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we have all the necessary information to investigate this behavior.
    - Ralph

  • Hi,  I trimmed an audio regin in the audio track edior with "Snap Edits to Zero Crossings" on. But I zoom in.the waveform was not ended at Zero point. Why?  In the audio file editork, "Snap Edits to Zero Crossings" option works fine.

    Hi,
    I trimmed an audio regin in the audio track edior with "Snap Edits to Zero Crossings" on.
    But I zoom in、the waveform was not ended at Zero point.
    Why?
    In the audio file editork, "Snap Edits to Zero Crossings" option works fine.

    correction needs to be made to step #14, I typed:
    14) Point to the start or end one of the clips, when you see the icon showing arrows going either way, right click and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection start and endpoints.
    Here is the correction, THE CORRECTED PARTS ARE CAPITALIZED:
    14) Point to the start or end OF one of the clips, when you see the icon showing arrows going either way, LEFT-CLICK and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection's start and end points.
    Another Correction:
    Originally read:
    Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. You must then go back to MT view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit.
    Here is the the correction, CORRECTED PARTS ARE CAPITALIZED:
    Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. IF YOU WANT TO EDIT THE 2ND FILE YOU SELECTED IN MULTI-TRACK VIEW, You must go back to Multi-track view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit, THEN CLICK "EDIT" TO GO TO EDIT VIEW.

  • Why can't iTunes resume playback of the last track I played before closing it?

    If Safari can recall the last page I had open when I closed it, and Preview can open the last documents I had open, why can't iTunes resume playback of the last track I played?
    Come on guys, a search on the internet will bring up discussions from the early 2000s with the question of resuming playback. Just add the feature already.

    HI THanks for this helpful post. I will try this. I have 2 iPods. One is 3rd Gen. I love the little small square, so I bought it on ebay. Then I got a little iPod nano ( again a tiny square shape)
    So I tried to sync them today and update them.
    This is the response I got.
      I get a message that the original file cannot be found and asks if I want to try and locate file.  I locate the file and it's empty?!
    This freaked me out because I have all this music I love. The only thumb drive is my back up drive which is not a thumb. Will the back up drive have my music files too?
    Thanks-Peace Out

  • Why am I unable to delete the default track (which seems to act as the master, right?) after making a rough mix?  Is it possible to delete the default track after having rendered a mix?

    Why am I unable to delete the default track (which seems to act as the master, right?) after making a rough mix?  Is it possible to delete the default track after having rendered a mix?  I did a rough mix and now cannot change the song as the tracks that were a part of the rough mix seem to remain in the song even though I mute the tracks for a new mix.  For instance, I played and recorded a different bass line.  Muted the original, but when trying to create the new mix I can hear the original bass line even though I have muted that track.  It seems to remain in the previous master (default) track.  Please send help.  Thank you.

    Before answering your question, you have to make sure you understand the difference between the different track types in GarageBand.
    Tracks, you record your music on
    There are three types of those Tracks.
    MIDI Tracks (aka Software Instrument Tracks)
    Audio Tracks (aka Real Instrument Tracks)
    Drummer Track (only one per Project)
    Global Tracks
    These are the Tracks that can be shown/hidden at the top of the Tracks Area for specific purposes.
    Arrangement Track
    Movie Track
    Transposition Track
    Tempo Track
    Master Track
    This Track can also be shown/hidden in the Tracks Area. Please note, you cannot delete that Track, only hide it, similar to the Global Tracks
    Regarding the Tracks you record your music on,  you can delete any of those. It doesn't matter if you created them or there are part of a Template (maybe that  is what you refer to as the default track). Once you delete the last Track, the "New Track Window" will pop up to add a new track.
    I will explain all that in much more detail in my manual "GarageBand X - How it Works".
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • Why is audition recording the stereo tracks unequally?

    I just upgrade to 3.0 from 1.5 and I must say I have been racking my brain for hours trying to figure out all my problems. I found most by scrolling old posts but this one I cant find. After installing the program I opened a beat in the first track of multiview. I tried recording and I was having latency issues so I took the advice that popped up in a message prompting me to switch to ASIO drivers. I opened the audio hardware tab and selected my mic (02s) (samsung C01U). Now, when I record in stereo the volumes dont record evenly. The left ear records just a little bit louder then the right ear. On the bottom where the mic level are the top bar stays a precise amount away from the lower bar (about 2 inches). So when I record, the top level (left ear) records normal and the bottom level (right ear) in considerable lower. Doesn't sound good. I know I could equalize it using effects but I want it to record evenly. Anyone know how to fix this. I have VIA High Def Sound Card (I think...thats what it says under device manager) and windows 7. I was messing with the settings in my ASIO4ALL control panel trying to fix the latency issues so maybe I screwed something up there. What default setting should I put in the boxes in the ASIO4ALL control panel?

    Phate008 wrote:
    Have I been recording wrong this whole time?
    Yes.
    Do people record into mono mics often or do most people use stereo mics? Also why would stereo record equally in 1.5 but not in 3.0?
    All microphones are essentially mono. If you have two of them closely adjacent but pointing in different directions in one casing (aka a 'stereo' mic), you will get some sort of stereo from them - depending on how good they are. The vast majority of people use mono mics for single voices though - there is no benefit from using a stereo one for this at all. And there is absolutely zero benefit in recording a mono mic in stereo - it just wastes file space, because both channels will contain absolutely identical information. In fact using a stereo mic pair for recording a single voice is counter-productive - you end up using the variable part of the mic's polar pattern on both mics (not so good), and the slightest physical movement of the vocalist shifts the sound in the mix considerably. This is way easier to control with a single mono mic - the only determinant of where it sounds in the mix is the pan control.
    The reason you are experiencing a difference has nothing to do with Audition at all, but everything to do with using a different driver. The present driver for your mic only outputs signal on one channel in stereo mode - which is pretty ridiculous; it shouldn't even have a stereo mode!  What you should do is select a mono input - which will say something like [01m] on it in Audition, and use that to record, using the pan control to position the sound in the mix.
    In a properly set up stereo monitoring system, a mono source wil appear in a single (vurtual) location between the speakers, depending on where the pan control is set. If this doesn't happen on your setup, then you need to fix the acoustic conditions around the speakers so that it does, otherwise you won't have the faintest clue about what your mixes really sound like.
    I'm sorry that this all sounds a bit harsh, but I'm afraid that this is the way it is...

  • I try to play an album on ITunes for Windows 7and it plays the first track then randomly goes to a different album and plays the whole of that. Can anyone explain why? Shuffle is turned off....

    I try to play an album on ITunes for Windows 7and it plays the first track then randomly goes to a different album and plays the whole of that. Can anyone explain why? Shuffle is turned off....

    I am working on a friend of mine's 15g ipod(W/dock connector)and I am having the same trouble except it does it to all the songs. I have tried reseting it multiple times, but to no avail.
    I am not sure that this runs on windows XP, it is absolutly archaic (compared to my 5th gen. 30g video).
    Help?
    15g ipod (w/dock connector)   Windows XP  
      Windows XP  

  • Why did apple remove the combine tracks option in importing settings

    itunes for windows 7. APPLE took away the combine tracks option in import settings, why?

    I can't see all of the screen - are the tracks ordered by track number?  If so, then the "Join Tracks" option should be available to you.  If you follow this sequence of operations (with apologies if this seems tediously obvious ...):
    insert CD
    wait for track info to appear
    click on the heading of the column containing track numbers (normally this will be ordered sequentially, first to last, and the column will have a "^" symbol in the heading:
    The track order should now be reverse (highest to lowest), with a down arrow symbol in the heading
    Click on the column heading a second time - this will ensure that tracks really are in correct sequential order
    Now hold down SHIFT and select the first of the tracks you want to join followed by the last of the tracks you wish to join.  One set of tracks should now be highlighted.
    Click on Options
    If you're still not seeing the "Join Tracks" option then there may be an underlying issue that'll require further investigation.

  • HT6115 When I upgrade to 3.7.2, ARD forgets the serial number.  Why? How can I fix this?

    When I upgrade to 3.7.2, ARD forgets the serial number.  Why?
    How can I fix this?
    Thanks,

    What is your previous product. The order page indicates either 9 or X std as qualifying products. Not sure why pro is in included, but not sure what your issue is.

Maybe you are looking for