Why FCPX stops encoding ?

Hi there,
I have some clips on the timeline to encode. It took about 30 mins to encode. I am on Mountain Lion.
I make so some changes and re-encode it again.
Every time it took about 30 mins to encode.
Then, I made some changes again. As it will take 30 mins, I went for a drink. When I came back, the screen is blank/back and it stopped encoding !
Previously, on my Snow Leopard iMac, it will still continue to encode even though it went blank/black (when I came back, usually the file has been encoded !)
Any ideas why ?
Thanks

My response in bold below:
Russ H wrote:
You mean you are manually rendering? That may not be necessary unless you're getting unsatisfactory playback from the time line. (I never render unless I have to.)
Not sure what you mean but I have background rendering on (previously and now)
Does blank/black mean the absence of orange render bars? Perhaps you had Background Rendering on in your previous setup.
Blank/Black means the whole screen goes blank/blank after you leave it alone/untouch for a while. (Something like when you put the computer to sleep)
I also notice when I upload a file to vimeo, as it will take a while, I usually go away & leave it alone for a while & come back later (& I just hit the return button to wake the computer from the blank screen and it will show my file has been upload).
But this time, when I hit the return button, it will continue to upload (the percentage then start to increase while it stops uploading when in blank/black).
I hope you understand what I am trying to say ...
Thanks

Similar Messages

I don't know why win7 stop itunes working.

Hello. I don't know why Windonws stops itune working when importing music.
I considered what cause to do that,but I can't find out. Icould put music into ipod classic the day before yesterday. Now I can't.
Pl give me right direction if anybody know this situation.
thanks
freakmeout

There's a bug with 10.1.0.54 that is causing "iTunes has stopped working messages" (citing CoreAudioToolbox.dll in the Problem Reports for the error) for some folks when importing CDs with the AAC encoding, adding/converting files to AAC, and in some cases syncing devices (when the convert to 128 kbps AAC option is enabled).
Short of rolling back your iTunes to 10.0.1.22 and your Apple Application Support to 1.3.2 (CoreAudioToolbox.dll is kept in the Apple Application Support program files), there's a few possible workarounds.
(1) Change your importing prefs to use a different encoding (won't help with the device syncing variation though), and/or disable the convert to 128 kbps AAC when syncing option.
(2) Replace your CoreAudioToolbox.dll version 7.9.4.0 with a 7.9.3.0 as per:
http://discussions.apple.com/thread.jspa?messageID=12576816#12576816
(3) Or, replace your CoreAudioToolbox.dll version 7.9.4.0 with a shadow copy of a 7.9.3.0 as per:
http://discussions.apple.com/thread.jspa?messageID=12583499&#12583499
(2 and 3 do help with the syncing variation.)

Why cant I encode a .mov using Adobe Media Encoder CC to .mp4 or .ogv to use in Edge?

Why cant I encode a .mov using Adobe Media Encoder CC to .mp4 or .ogv to use in Edge?

Yeah, mp4 in HTML5 browsers is h.264 encoded - h.264 is a subset of MPEG-4 standard. More info here:
H.264/MPEG-4 AVC - Wikipedia, the free encyclopedia
For ease of use in AME, if you look at the right side of the UI in the presets, the Web Video > YouTube presets are the ones that will encode to h.264 with the mp4 extension.
hth,
Joe

Media encoder STOPS ENCODING!! help!

I am encoding my premier pro project in Media encoder, but it stops encoding every time. It happends on different locations, its not in the same spot every time. I had sooo much problem with permiere cc.
Any one knows a solution to this???
I am exporting H.264 HD 1080p 25
I really need to get my project done

Peferling... I have a positive update! I went to the area that typically made things die. I noticed it was at the tail end of where I inserted a sequence into another sequence. I also noticed I had three tracks in that section with graphics. So I copied all the tracks from the inserted sequence... then removed the inserted sequence and re-inserted the actual tracks. At this point I no longer had an inserted sequence. I then simplified the three tracks of graphics into one. Re-applied my transitions and did last tweaking. I once again tried exporting as H.264 HD... et voila! It worked! Something must have been breaking it.
For now I'm okay and have been able to export into other formats. I want to thank you so much for your input. Regards, Nelson

Media encoder stops encoding at the end of the video (Premiere CC 2014)

I've finished editing a video (just under 4 minutes). When I try to export it to a windows media file (HD 1080p) it always stops encoding at around the 50% mark.
I have tried exporting to a shared network drive as well as the local hard drive with the same results.
I have it set to: Mercury Playback Engine Software Only
I have tried to export directly from Premiere and from Media Encoder.
I looked at where it stops when exporting from Encoder through the preview window. It seems to reach the end of the video and stops right where I fade out to white and the music ends. The interesting part it that the timer shows 50% left to complete
It doesn't crash... it just sits there with the timer increasing and never continues
I'm not using any plugins.
At the point where it stops, I have a "Dip to White" transition on the one video clip and no audio transitions applied to the soundtrack since it ends nicely with the video.
Please let me know if there's anything else I can/should explain to get some help. Thank you so much for your help.
System details:
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: HP Z230 Tower Workstation
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (8 CPUs), ~3.6GHz
Memory: 16384MB RAM
Available OS Memory: 16070MB RAM
Card name: Intel(R) HD Graphics 4600
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Display Memory: 1696 MB
Dedicated Memory: 64 MB
Shared Memory: 1632 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)

Peferling... I have a positive update! I went to the area that typically made things die. I noticed it was at the tail end of where I inserted a sequence into another sequence. I also noticed I had three tracks in that section with graphics. So I copied all the tracks from the inserted sequence... then removed the inserted sequence and re-inserted the actual tracks. At this point I no longer had an inserted sequence. I then simplified the three tracks of graphics into one. Re-applied my transitions and did last tweaking. I once again tried exporting as H.264 HD... et voila! It worked! Something must have been breaking it.
For now I'm okay and have been able to export into other formats. I want to thank you so much for your input. Regards, Nelson

Adobe Media Encoder CS4 stops encoding!

OS: Windows XP 32 bit SP3.
Hello, I've been working with Premiere Pro CS4 and Media Encoder CS4 since 2008 and it always worked fine. Now i've got a big problem that I don't understand: Media Encoder CS4 stops encoding at about 10-12 seconds after the encoding starts.
The curious thing is that the software really does not crash, it just stops encoding, the time counter freezes, but Media Encoder does not crash itself, you can add or delet video, edit preferences, etc.
It doesn't matter what kind of video I try to encode, I've tried Premiere sequences but also independent video files. It always happens the same and I really don't know what to do.
I have the latest versions of both software... can anybody please help me??

That software and OS are both pretty old. You may find there aren't too many people still using them to help on this one.

Media Encoder Stops Encoding with the New CS5.5

I just upgraded to CS5.5 a yesterday and having some issues encoding an 1 1/2 program for a DVD. The program doesn't seem to crash per se, just stops encoding. The task manager says it's running. I tried to encode the same sequence, but shorter and have the in and out points go through the part where it always stops and it worked fine. It's just when I try the entire sequence it stops. Anyone have any experience like this with CS5.5 just coming out?
Thank you,
Doug

Well, my problem happened with CS5, not 5.5. I don't encode enough to be able to say that it continues to be a problem. However, I would still pull up my CS4 AME if I needed to encode something again. But honestly, it sounds like the same problem as I had. My problem may have been further complicated by running CS5 as 64 bit.
For the record, I was never able to fully encode the f4v file I was given. AME behaved as though it was corrupt at the same point each time, shaving off about a half hour of the presentation. For several days I thought it was only a half hour presentation! I was given this file by an a/v company that caters corporate meetings. It was a video that combined a Powerpoint presentation and the audio from the podium. I asked for a file that I could use for Flash because their world is all Quicktime.
As I said, in the end the only way I could salvage this project was to extract the audio by encoding the f4v with Quicktime Pro and then use a third party software to marry it to the PPT presentation for a flash movie. That is a whole other issue I wish Adobe would look into, being able to encode PPT for flash. Corporations are doing some really cool presentations for business but MS just doesn't play well with Adobe Flash. It would really help me to be able to take my client's stuff and put it up on the web easily.
The young guy I work with said it was the lack of Quicktime codecs on my computer that was the hangup because in all likelihood they encoded the f4v with Final Cut Pro.
I work in a broadcast HD tv station. We are attempting to transition our clients commercial material to database for use on-air using computer files they provide (to get away from video tape). I can't tell you how much trouble missing codecs has been with this. Clients make their stuff in all kinds of environments and it can be professional or amateur. Sometimes the video is there but the audio is missing or vice versa. Sometimes one 30 sec spot will be fine, but the next one in the same file will take a 30 sec spot and stretch it into a 5 min timeline, losing the audio and playing the video slo mo. Our editing system is Grass Valley's Edius so that adds a whole new problem with codecs. It took us a long time just to figure out how to open a .mov on a timeline. So in the end we replaced one headache with muliple tape formats to a bigger headache with multiple codecs and proprietary software programs.

Why Photoshop stopped working with Lightroom and how to fix it?

Why Photoshop stopped working with Lightroom and how to fix it?

As I am editing photos in lightroom and just right click on the photo to select to edit in photoshop the opting shows up in gray out but it isn't available for selection anylonger. It was working just fine a few days ago.
Thank you for your reply!!!

Why I stopped using Skype today (probably forever)

Why I stopped using Skype today:
1: updates being rammed down my throat. if i hit no ONCE, it means I DON'T WANT IT. I don't need to give you any reasons as to why I don't want it, but I'll do it anyway:
a: more ads everytime I upgrade
a: uglier interface everytime I upgrade
2: Oh my god, the ads. After the software finally figured out some way to update itself today (without my permission) after 3-4 months of me hitting NO NO NO NO NO everytime the stupid window pops up, I get exposed to an ad for DEPENDS. Jesus christ, i'm a 26 year old male. And now it's above EVERY CHAT WINDOW instead of just the main page. Fantastic. I really want to think about DIAPARS everytime I look at skype.
3: I would rather convince my friends to install STEAM for use as a messenger than convince them to install this piece of trash. At least DEPENDS ads arn't rammed down my their throats.
Seriously, Skype has been getting worse and worse for the last 3 years. It's now officially worse than i remember AOL instant messenger being. It's gotten that bad. Just... DIAPAR ADS? REALLY?

Well here is what I'd recommend doing:
Do a hard reset on your modem & router. Then re-test, if the problem persists it's possible you have a DNS problem. If you are not familiar with DNS settings (I'd be a little surprised if you were) then I'd recommend carefully reading this MacWorld article; DNS Troubleshooting. Then I'd recommend changing your DNS settings using the following directions.
1. System preferences
2. Network
3. Click Advanced
4. Click DNS tab
5. Click + sign
6. Add 208.67.222.222
7. Click + sign
8. Add 208.67.220.220
9. Click OK.
10. Exit System Preferences
11. Try out your iMac and report what happened.
This might be the root of the problem. If not then I'd still recommend visiting the SKYPE site and see if you can track down similar issues others are having.

Why adobe stop tecknical online support and force customers to buy clowd service ?

why adobe stop tecknical online support and force customers to buy clowd service ?

Nasty people with their mind in their pockets.

AME CS4 Stops encoding after about 10 min without failure message

Can anybody help me with the following problem?
I have edited a Video of about 15 min length in Premiere Pro CS 4 and now i am trying to export it.
But no matter which format or resolution i choose, the adobe media encoder stops encoding after about 10 minutes withoit giving any failure message. It does not really crash, it just stops, timer is frozen, but the media encoder program still reacts to inputs! When i let it start encoding again nowm it won't start encoding at all so i have to restart the computer in order for it to start encoding, but it will again encode for only 10 min again!
I am using an acer i7 3610qm laptop with 4 gb ram and win 7 64bit
I have updated to the latest versions of premiere and media encoder and also i have tried deleting the preferences, no change...
Does anybody have a clue?

You might also want to check your GPU settings in Premiere (File > Project Settings > General). If the Renderer is set to CUDA, switch to Software Only and try encoding the sequence again.

How do I figure out why webcam stopped working

How can i figure out why webcam stopped working. Sometimes rebooting helped but now it does not go on when software comes up

Hi,
Please use this to fix
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02452221&lc=en&cc=us&dlc=en&product=3761191
Links for XP & Vista are in there too.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why download stops at 4.9 for the 5.8 file?

why download stops at 4.9 for the 5.8 file of the production suit? downloaded file not opening

Hi,
attempt to download production suit following adobe instructions with download manager. browser firefox, Win 8, 1T free space.download stops at 4.9 G. the file would not open. error message says archive file cannot be extracted.
chris

Any body know why FCPX doesn't support footage recorded in 1080-60P form Panasonic HDC-TM900 camcorder?, Any body know why FCPX doesn't support footage recorded in 1080-60P form Panasonic HDC-TM900 camcorder?

Anybody know why FCPX doesn't support footage recorded in 1080-60p form Panasonic Camcorder HDC-TM900???

I'm trying to decide on a new camcorder between the new yet to be released Panasonic HD-X900M and the Canon VIXIA HF G10. Currently have a Canon HV 20 which works great, but thought I'd upgrade to newer tech. Looking at the supported cameras list published by Apple, the newer Panasonic hasn't been tested yet so am unsure if it is the same as the previous model. I suspect it is. The newer Canon appears to be good, but spec. say it is only good up to 1080I. I'd rather have the progressive camera if it isn't that much of a hassle to convert the files.
Thanks for alll your info on this subject.
Dale

FMLE stops encoding

Recently we installed FMLE 3x, we stream to two servers using the FMS and backup URLs. We are finding with some frequence that FMLE stops encoding to one of the URLs. I will appreciate a lot some information about a possible cause/solution for this problem if some one here has experienced this behaviour.
Thanks in advance !!

Are you getting any status message in Encoding Log tab of FMLE related to connectino break with that FMS server.
If any disconnection message is there then FMS is dropping connection from FMLE
If not then please check the RTMP buffer value from Publishing stats at Encoding Log tab. If buffer value is increasing then that means FMLE is not able to push complete data to FMS either due to network congestion or due to Network latency. If this is the case then you can try using Auto Adjust feature of FMLE for single stream as for MBR Auto Adjust feature does not work.

Why FCPX stops encoding ?

Similar Messages

Maybe you are looking for