Why filter causes multiple identical images in gridview to display in literoom 4.3?

I have not been able to find why multiple identical images are displaying in gridview when filters are applied. There is only one image in the folder. This obviously makes it difficult to apply images to keywords.
I simply can't find the reason. Neither is there anything in help on this issue.

BenMarkus
Third request for help regarding the problem detailed below.
Mar 16, 2013 1:44 PM in reply to Community Help
Report
I am in the process of organizing my Literoom images and filter displays
MULTIPLE IDENTICAL IMAGES, under METADATA STATUS changed. .
Computer info - Literoom 4.3, windows 7, some 55,000 images on the hardrive, one
catalog used.
When I go to folders, and click on J drive which holds these images, they all
come up if filter is off of course. Now using metadata I search on a date, a
camera, lense, etc. But I just want to find all of my images on a particular
day. I can find those with no problem. My problem is that I may have 2 or more
identical images display in grid and view as well as film strip. Looking up
metadate status I find that these images are CHANGED. I understand that status,
but there is no way that these multiple images would result from my work.
I searched for multiple files located in multiple folders - NOT THE CASE. What
is creating those multiple files, they are identical as to date, how they look,
etc?
If I go to CATALOG, and work with the all the images there, found at the top of
course, I get the same functionality, BUT THE MULTIPLE IMAGES ARE ABSENT.
I can't find the reason for this in any help. I would appreciate very much some
one telling me why this is takes place. It makes it difficult to keyword on
images on a certain date, because of the multiple files.
Filters are a powerful tool for organizing collections and keywords - my problem
is not using filters, but understanding why multiple images.
Further investigation this problem is found in any place - Catalog, or folder.
Believe me this is a PROBLEM. I need to find a live person somewhere in the
vast ocean of helps that can answer this question. I don't have a problem
understanding how to use it, I JUST WANT TO KNOW WHY MULTIPLE IMAGES.
Can you or someone in Adobe answer my question. I just want an answer. Say I
payed my money why can't it work properly.
Ben Lamfers

Similar Messages

Lightroom 4.3 displays multiple indentical images.

Mar 16, 2013 1:44 PM in reply to Community Help
Report
I am in the process of organizing my Literoom images and filter displays MULTIPLE IDENTICAL IMAGES, under METADATA STATUS changed. .
Computer info - Literoom 4.3, windows 7, some 55,000 images on the hardrive, one catalog used.
When I go to folders, and click on J drive which holds these images, they all come up if filter is off of course. Now using metadata I search on a date, a camera, lense, etc. But I just want to find all of my images on a particular day. I can find those with no problem. My problem is that I may have 2 or more identical images display in grid and view as well as film strip. Looking up metadate status I find that these images are CHANGED. I understand that status, but there is no way that these multiple images would result from my work.
I searched for multiple files located in multiple folders - What is creating those multiple files, they are identical as to date, how they look, etc?
If I go to CATALOG, and work with the all the images there, found at the top of course, I get the same functionality, BUT THE MULTIPLE IMAGES ARE ABSENT.
I can't find the reason for this in any help. I would appreciate very much some one telling me why this is takes place. It makes it difficult to keyword on images on a certain date, because of the multiple files.
Filters are NOT a powerful tool for organizing collections and keywords when this problem exists. My problem is not using filters, but understanding why multiple images.
My feeling is that this is a unreported bug. I do not see how this could be a misapplication - though I would accept that if that was the case so I COULD CORRECT MY PROBLEM.
Is there anybody out there that knows about this problem, or has experienced it. Please tell me.

Mar 16, 2013 1:44 PM in reply to Community Help
Report
I am in the process of organizing my Literoom images and filter displays MULTIPLE IDENTICAL IMAGES, under METADATA STATUS changed. .
Computer info - Literoom 4.3, windows 7, some 55,000 images on the hardrive, one catalog used.
When I go to folders, and click on J drive which holds these images, they all come up if filter is off of course. Now using metadata I search on a date, a camera, lense, etc. But I just want to find all of my images on a particular day. I can find those with no problem. My problem is that I may have 2 or more identical images display in grid and view as well as film strip. Looking up metadate status I find that these images are CHANGED. I understand that status, but there is no way that these multiple images would result from my work.
I searched for multiple files located in multiple folders - What is creating those multiple files, they are identical as to date, how they look, etc?
If I go to CATALOG, and work with the all the images there, found at the top of course, I get the same functionality, BUT THE MULTIPLE IMAGES ARE ABSENT.
I can't find the reason for this in any help. I would appreciate very much some one telling me why this is takes place. It makes it difficult to keyword on images on a certain date, because of the multiple files.
Filters are NOT a powerful tool for organizing collections and keywords when this problem exists. My problem is not using filters, but understanding why multiple images.
My feeling is that this is a unreported bug. I do not see how this could be a misapplication - though I would accept that if that was the case so I COULD CORRECT MY PROBLEM.
Is there anybody out there that knows about this problem, or has experienced it. Please tell me.

How do I print multiple identical small images on the same sheet of paper?

I would like to know how I can produce multiple identical small images (10mm x 10mm) on the same sheet of paper?
I used to be able to do this in older versions of Adobe Photoshop.
Thank you.

Try using picture package. There is an option to print 10 copies on a single sheet.
1. Select your photo in Organizer
2. Click File >> Print
3. Choose picture package in section 4 of the print dialog
4. Select layout in section 5 and choose fill page with first photo
5. Click print button
Click to view image

How to remove "Blue filter" from multiple images in the History Panel

I am using Lightroom 4.3 on Windows 7 pc. I have a collection with approximately 650 images. I was working in the collection and had all the images selected. Somehow I inadvertently must have hit a keyboard shortcut that effected all the images. All of the images are negatively effected and they now look terrible. When I go to the History Panel, all the images have "blue filter" as their most recent entry. If I select one image and go back to the step before the "blue filter" everything looks fine again. My problem is I have this effect in 650 images. When I try and do the change in one image and then synch to the rest, I don't know what box to check to remove this "blue filter" that has been added to all the images. I know I can do them one by one, but with 650 images, it's a long and tedious process. Any way I can remove the "blue filter" from multiple images in a collection?
Thanks,
Matthew Kraus

If you’ve just done it, then an Undo operation would reverse things on all the images, I think. But if it took you a while to see the problem, then you might have done something to cancel the undoability.
Isn’t Blue Filter a built in LR preset that modifies the HSL settings: http://kb2.adobe.com/community/publishing/924/cpsid_92473.html
Open the HSL panel and step back into History on one of the affected images so the effect of the Blue Filter preset has been undone and notice what HSL sliders change, and then if the 650 images DON’T already have any HSL adjustments you should be able to sync JUST the pre-Blue-Filter HSL adjustments (perhaps all zeros) to the other 650 images.

Why can't I open multiple sparse image files at the same time in FCPX?

I work in a multiple editor enviroment, where we have hundreds of different projects. They are all divided into sparse image files to keep them all separated. I used to be able to mount multiple sparse image files and see them all in FCPx. But recently, FCPx upon opening, will close out all but one sparse image. The images are still mounted to the OSx but FCPx will not recognize them. I can only open one sparse image at a time. I am needing to export multiple projects at the end of the day, and can't batch export or send them all to compressor because I can open up multiple projects.

I work in a multiple editor enviroment, where we have hundreds of different projects. They are all divided into sparse image files to keep them all separated. I used to be able to mount multiple sparse image files and see them all in FCPx. But recently, FCPx upon opening, will close out all but one sparse image. The images are still mounted to the OSx but FCPx will not recognize them. I can only open one sparse image at a time. I am needing to export multiple projects at the end of the day, and can't batch export or send them all to compressor because I can open up multiple projects.

Filter using 2 input images (Flash). How to implement?

Hi. I know how to implement filters that process single image as it was described in Pixel Benders Developer's Guide, but how can I apply filter using 2 input images one of which is computed? I wrote a filter that coppies alpha channel of one picture and applies it to another, but flash implementation is quite a puzzle for me... Any help appreciated

In our tutorial from last year's MAX, I showed how to use a two-input pixel bender kernel as a blend filter for two images on the stage. that is posted here:http://blogs.adobe.com/kevin.goldsmith/2008/12/materials_from_1.html
In one of my recent blog postings, I showed how to use a ShaderJob with multiple inputs. I was doing it for audio processing, but it works almost identically for images: http://blogs.adobe.com/kevin.goldsmith/2009/08/pixel_bender_au.html
Hopefully one of these should help, but if you have specific questions, don't hesitate to ask...

How do I show multiple rollover images on a page inserted dynamically (pulled out of a sql database

How do I show multiple rollover images on a page inserted dynamically (pulled out of a sql database table) using Dreamweaver’s Repeat Region. Example: I have different products each one associated (through their productID) with two images (one that’s showing in the page and one for the rollover effect) that are pulled from a database using Dreamweaver’s Recordset. So I want to end up with a page containing row after row of images(one for every product).When moused over each image will reveal the second (rollover) image for the same product which in turn can be a link(the image itself ) that when clicked leads to a detailed page with more information about the product the image is associated with. To show row after row with images for the different products in the database table I am using Dreamweaver’s Insert Rollover Image command and then the Repeat Region – I have no problem to complete the steps, to insert the image and the rollover one at once and set the paths so they are pulled dynamically depending on the productID they are associated with .I have also no problem to apply the Repeat Region so not only the first image associated with the first product in the table is shown but all of them-a routine and standard procedure when using the Repeat Region to dynamically generate and display multiple rows of data. However, when I preview the page the rollover effect is lost –the images are shown but when moused over the second image does not show. The problem is caused when the Repeat Region is applied-once again I am allowed to apply it but the rollover stops working, a kind of interference. ANY SOLLUTION PLEASE, ANY WORK AROUND.

I gotta tell you, using multiple images for rollover effects is going to be a big challenge in your dynamic scenario.
If this were my product page, I would use thumbnails with a bit of CSS opacity or filters to desaturate and make them full opacity/color on mouse over. Nice effect with much less bandwidth. Easily done globally with CSS code.
Two examples:
http://alt-web.com/GALLERY/GalleryTest.php
http://alt-web.com/TEMPLATES/CSS-Semi-liq-photo-sheet.shtml
Nancy O.

How do I filter on multiple values / labels within a Pivot Table which points to a Power Pivot Model

Hi,
How do I filter on multiple values / labels within a large data set within a Pivot Table which points to a Power Pivot Model. I am current using Excel 2010 64 bit. I intend to empower users to achieve this by simply using the Excel user interface, not by
using Excel formula or DAX. Please find the attached screen shot as a worked example, also in my real life example not all the values are available in the drop down. You can't use a slicer for the same reason as you can't use a drop down. I guess what I was
hoping for is for the user to be able to enter AND or OR within the associated dialog box. Is there any way around this?
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Hi
This is the forum to discuss questions about Microsoft Excel develop (VBA, Automation). For your question is more about pivot table features for Excel, I will move
this thread to the TechNet forum for Excel.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share
their knowledge or learn from your interaction with us.
Thank you for your understanding.
Best Regards
Lan
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help Sumitting multiple identical forms????

I have a JSP page where i include my page navigation as another JSP on the top and bottom of the page... since the previous and next links are submits of form I get a javascript error... how can i include multiple identical forms to one jsp page////

I believe the OP is talking about the "Merge Comments?" pop-up that i'm getting as well.
I can't figure out how to stop it from prompting people to do this... it's causing quite a lot of confusion!!
I attached a screen shot of it so we can get rid of any ambiguity =P
Thanks,
Alice

Why a long and narrow image (400x2200)mm is cut off while printing on Epson 9880 using Adobe Illustrator?

Why a long and narrow image (400x2200)mm is cut off while printing on Epson 9880 using Adobe Illustrator?

3.2 you can make multiple clocks, each clock can have a different alarm.

Adobe Premiere Elements 7 - Selecting Multiple Still Images for Time Stretch

Hi,
I have Adobe Premiere Elemetns 7. I would like to be able to select multiple still images on the timeline so that I can timestretch them all at the same time.
I understand that you can do this when you drag the photos over to the sceneline, then get the dialog box that asks for the time duration or transition duration. I would like to do this after they have been placed on the timeline though.
I would like to put say an hour of music on the music line, then drag over say 400 photos, then timestretch the photos such that thier time matches the music timeline. Smartsound does not seem to find the music on my computer to do this, I would like to use my own music.
Any help would be appreciated, thanks.

Tonight why don't you download the free 30 tryout of Premiere Elements 8, check out the feature of interest in particular, and determine if it is worth it. Check out it's stability in your computer environment. You do not have to uninstall Premiere Elements 7. When you install Premiere Elements 8, the installation process detects prior versions and tells you that you do not have to uninstall them, just use one at a time.
Depending on how things go, get on the phone to Adobe Customer Service Monday morning and be pleasant but determined, express your need for the new feature(s), and request an exchange, the new for the old. As a last resort, request your money back for version 7.
Please update us on your progress. But, in the back of your mind, keep the old thought of "be careful what you wish for". You may win one with the duration feature but lose some ground with stability and other features.
ATR

Resize multiple imported images simultaneously

Is there anyway to resize multiple images simultaneously? Currently, I select 8 - 12 jpegs and drag them into fireworks, then resize each one individually. Is there anyway to streamline this process? I tried selecting all of the jpegs at once and fireworks seems to be trying to resize the images in relation to the canvas which doesn't result in identical image sizes.

Read the Fireworks help files section on batch processing.

Radial Blur (spin) filter on multiple selections

Is there any way to make this filter operate separately on multiple small selections? For example, if I want to apply the filter to many individual stars on an image of the night sky, I can easily make a selection of all the bright stars in the image, but when I apply the radial-spin filter, it operates on the total aggregated selection, rather than separately on the small selection area around each star.

Thanks for that suggestion. I should have explained though that I'm not trying to animate or add sparkles the image. I'm using the older version of the radial filter to make individual star images smoother and more circular (rather than current egg-shaped). Applying the filter to a small circular selection around a single star works well, but it's not practical to repeat the process very many times to apply it to every star. Although Noel's filter doesn't do quite what I want, it does address the problem of applying the filter across multiple centres .... so there is hope!

What causes multiple entries in my calender events in my iPhone 4s?

What causes multiple entries in my calender events on my iPhone 4s?

Hi jeffpetit,
Here is a link that will help you troubleshoot this issue with the camera on your iPhone:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

What would cause multiple error lines to appear using validator logic

What would cause multiple errors to appear for a single line as shown below. I coded Regular Expression Validator with a specific matching pattern and all the patterns work fine. When I key in an invalid pattern on a row I get the following errors dislayed. Why am I getting multiple error lines instead of one. Also when the data in the field is in error the field gets cleared. How do I fix this problem?
Error
java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
- JBO-ObjectCode_Rule_1: Object must be in range 8000-8999 or object must be in form of 8%, 8n%, 8nn% where n represents a number.
- JBO-27008: Attribute set for ObjectCode in view object AccountsecuritygroupobjView2 failed
- JBO-ObjectCode_Rule_1: Object must be in range 8000-8999 or object must be in form of 8%, 8n%, 8nn% where n represents a number.
- JBO-ObjectCode_Rule_1: Object must be in range 8000-8999 or object must be in form of 8%, 8n%, 8nn% where n represents a number.
- JBO-27008: Attribute set for ObjectCode in view object AccountsecuritygroupobjView2 failed
- JBO-ObjectCode_Rule_1: Object must be in range 8000-8999 or object must be in form of 8%, 8n%, 8nn% where n represents a number.

Looks as though my RegEx script is not coded properly so it is causing the problem.
This is my regex script
8([0-9]{3})|8([0-9]{0,2}\%)
I changed the script above to the following to slowly build the script back to get rid of these multiple errors that are appearing. When I set my regex script to the following then I just get the one error line.
([0-9]{4})
I thought the regex script was working but when I key an invalid value I get 8 error lines as shown above. That should not be happening. This regex script
8([0-9]{3})|8([0-9]{0,2}\%)
is to perform the following logic:
The field I am editing is 4 characters long.
1) The first character must be an 8 and the next 3 charaters must be any character from 0-9
OR
2) The first character must be an 8, the next 0-2 characters must be any character from 0-9, the next non-blank character after any digits must be a wild card character of %
Examples: any number from 8000-8999, 8%, 8n%, 8nn% where n is any number from 0-9
Edited by: cwilbur on Sep 14, 2011 1:28 PM

Why filter causes multiple identical images in gridview to display in literoom 4.3?

Similar Messages

Maybe you are looking for