Why find my iphone could not be loaded missing resources?
Iphone stolen, trying to find it through find my iphone, getting the message "find my iphone could not be loaded missing resources"
still able to get into my icloud account. First few days it gave me the device is offline message.
What is happening?
Covered in this support article:
http://support.apple.com/kb/ts4451
Which, you used to get here. You need to read the article & go through the troubleshooting steps.
Similar Messages
-
I started getting a Timed Out error message on my iPhone 5 when trying to browse the internet tthat reads Page could not be loaded. Connection timed out. I performed a Reset Network Settings and am still getting the error message. What is the fix?
Thanks so much for more direction.
I realized that I bought this iPod T4 about a year ago, so decided to check the date and it is still under the 1 year ltd. warranty until 21 Dec. I contacted Apple via Chat and was informed that the problem may lie in the version of iTunes I was running 10.7. Today Apple released v. 11 of iTunes which I was instructed to download. It's TOTALLY different from iTunes 10.7 - drastically different in fact.
The Apple Chat Rep set up a phone call appointment forl 8:00 pm ET tonight where another Rep will call me to make sure the restore was accomplished OK. With v. 11 of iTunes I can't even find the restore option!!! The phone Rep will have to help me navigate v. 11 of iTunes. It doesn't seem intuitive at all. Maybe it's just me?!?!
Thank you for sending this new link for firmware. It's not clear to me right now whether I'll need it or not. The phone Rep will probably somehow be able to resolve the problem. If not, they'll probably send me to the nearest Apple store if the problem is hardware, as it would be covered under the warranty. I will give another update as to what transpires as a result of the phone call with the Apple Rep.
Again, thank you so much for helping me. -
I hv iPhone with ios 6.0.2
My iphone could not able to check for update…it’s just showing “checking for updates” with loading sign
How can I upgrade to ios 7?
Help plsI agree- I apologize if I sounded skeptical and attacking. In no way did I mean it to sound that way.
I completely agree on the software-hardware combo issue- this is why apple killed off 1G and 2G devices- because newer software revisions would never ever run well if at all on such ancient devices. can you imagine running iOS 6 on an iPhone/iPod touch 1G? That would be terrible. Let alone iOS 3 runs terrible on them and now are generally rendered useless due to newer App Store requirements (most require 4.3+ now to allow apple to kill off the older devices). forcing newer software on older hardware (apple, dell, HP,... Anything electronic this definitely applies to) will almost always yield less-than-par results. The other part is apple forcing you to upgrade by means of intentially making things obsolete. all companies do that.
All of this factual info aside, the issue at hand with the 5 is not a software-hardware combo problem- those are most widely seen with the major revisions. then again, this isn't the first time apple has gotten caught up in battery drain snafus (even iOS 5 was plagued with this as well- and now there are some people desperate to roll back but can't). it basically waters it down to the point where keeping the stock software will always yield the best results even though newer versions provide better features- it all depends on whether or not the person deems the added features are worth a performance hit.
PS. I'm still at 100%- and I've been using it periodically throughout the day. your combo worked for you, but didn't for me. And may or may not work for others- As the tech world would say, mileage may vary.
PSS. What model/carrier do you have? Just wondering. -
Hi, I set up my new iPhone S4 with iclouds. So the data of my old S3 should move to the S4. However, some applications could not be loaded on the S04. Now some apps are loaded and others not . How can I progress?
Thanks. I can change the forwarding settings in Gmail to be either POP or IMAP. That is quite simple. I just looked at those settings on the Gmail server and, to my surprise, both are enabled. In order for outlook client on my computer to receive IMAP emails I have to change the email account settings in my current outlook from POP to IMAP. I don't need to be using the Exchange version of Outlook to receive IMAP. I guess I'll do a little research tomorrow on Exchange so i can figure out what, if anything, it might do for me.
I glanced at the link you sent me and it looks like it might be very helpful - another project for tomorrow.
BTW: I hit "This Solved my Question" by accident. I meant only to "like' your response so you would get some benefit from the help you've given me so far. I hope I haven't discouraged others from taking a shot at helping me. I suspect there is more than one way to approach this and, as you know, my problem isn't really solved until I have what I need all set up and running smoothly. -
why my iphone could not be restored ? and what is the meaning "this device isn't eligible for the requested build"
Covered in this support article:
http://support.apple.com/kb/ts4451
Which, you used to get here. You need to read the article & go through the troubleshooting steps. -
I was updating my iPhone 3GS, left it overnight and woke up to find that there was an error and my IPhone could not be restored. What can I do to make my phone work again? Have I lost all the data?
If your phone is in recovery mode, all data are gone. Connect the phone to iTunes on your computer and restore.
-
after loading in the new 6.1 software on my iphone4 is locked on the plug into Itunes pic.then "iphone could not be restored. The device isn't eligible for the requested build
Any Error messages or Alerts...?
-
I have got a iphone 3 GS version 4.1, i download bowling game (US$ 0.99), due to version mismatching i could not down load the same, i already paid for the same, please advise how to proceed the same.
i have been told not to update my iphone to new version, otherwise it will be locked forever.
please help me.
chandrru iyerHelp with what? It's YOUR responsibility to READ the requirements for any app you want to purchase. They are clearly stated on the app's info page. So, either update your phone or beg iTunes support for a refund:
http://www.apple.com/support/itunes/ -
I am try to update my iphone 4 4.2.7 to be ios 5 but Itunes keep giving me a message that iphone could not restored. WhY???
You have to delete the corrupt back-up so iTunes can at least back-up the current data on the iPhone and then restore it. Search these forums, there a several good posts on how to delete the corrupt back-up.
-
Why will my iphone 4s not find any devices with blue tooth it just keeps on searching
why will my iphone 4s not find any devices with blue tooth it just keeps on searching...??
If you're trying to connect to another Apple device you can't, it's not supported.
Here are the supported profiles http://support.apple.com/kb/ht3647 -
The iPhone could not be synced because this computer is no longer...
This is not about wanting to manage music, etc. It's about my work. I have an app in development and need to load the latest IPA for testing, a process performed through iTunes, like syncing anything else. When I try and sync I get the message, "The iPhone could not be synced because this computer is no longer authorized for purchased items that are on this iPhone.
I did the research on the internet and haven't found an adequate answer. I've tried:
— Being sure I'm logged into the same iTunes account as the iPhone.
— Deauthorizing then Authorizing the computer, after which I get an alert saying the computer has been successfully authorized, resulting in the same error message again when I again try and sync.
— Removing the SC Info folder, as found in this article: http://support.apple.com/kb/TS1389 . I guess I have the only Mac that has no trace af any such "SC Info" folder anywhere in the system (OS 10.6.8).
— Logged in under every conceivable account configuration (computer admin, device account, etc...) to no avail.
I have to get this IPA imported into the iPhone. It's the same process as syncing anything else. If anyone has a solution, please send it along. Clock is loudly ticking.
Many thanks.
CayceSame problem. Did you guys find the solution?
-
why is itunes saying "iphone could not be synced because this computer is no longer authorized for purchased items that are on this iphone"
I first called apple and they patched me to a technician who ran a test and determined that I had a virus. He gave me some price quotes and who to call. After my conversation with him, which I knew was BS btw, I immediatley called Geek Squad with whom my computer has a warranty through after they installed virus software on my new laptop (4 months old). I had a VERY long online session where they ran several virus test and found nothing. Although I was VERY happy that my computer didn't have a virus, I still had the problem of my itunes not working. After several hours, he made sure that all of my apps were down loaded, and then restored my iphone to factory settings, and sync my device. It worked perfectly and all and I mean ALL 240 apps were downloaded back onto my iphone along with my music and all of my tones. When asked why my itunes was acting in that manner the answer that I got was,"...apparently you had a correct file some where in itunes and everything had to be reset". Regardless, everything is back to normal and I don't have to get a new phone or delete itunes from my computer. Hope this helps!
-
Getting frustarted with itunes. I had to recently do a hard reboot ny iphone and attempted to sync my phone to get m apps back. When I go to sync my phone and it says,"The iphone could not be synced because this computer is no longer authorized for purchased items that are on this iphone". When I go to authorize it says it's already authorized. Help!!!!
I first called apple and they patched me to a technician who ran a test and determined that I had a virus. He gave me some price quotes and who to call. After my conversation with him, which I knew was BS btw, I immediatley called Geek Squad with whom my computer has a warranty through after they installed virus software on my new laptop (4 months old). I had a VERY long online session where they ran several virus test and found nothing. Although I was VERY happy that my computer didn't have a virus, I still had the problem of my itunes not working. After several hours, he made sure that all of my apps were down loaded, and then restored my iphone to factory settings, and sync my device. It worked perfectly and all and I mean ALL 240 apps were downloaded back onto my iphone along with my music and all of my tones. When asked why my itunes was acting in that manner the answer that I got was,"...apparently you had a correct file some where in itunes and everything had to be reset". Regardless, everything is back to normal and I don't have to get a new phone or delete itunes from my computer. Hope this helps!
-
Dependent module os4apilib.so could not be loaded
Hi ALL
Now I'm installing PI 7.1 on AS/400, when proceed to step import ABAP, an error about "Dependent module os4apilib.so could not be loaded" occurs. According to note 978127 and 1017181, it looks like a similar case to this one but it's for kernel 700. After I tried to replace os4apilib.so in directory /usr/sap/XD2/SYS/exe/uc/as400_pase_64/ with a new one extracted from SCSCLIENT_3-20001357.SAR, the issue still persists.
Please refer to below for error details:
WARNING 2009-01-30 17:32:06.065
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/XD2/SYS/exe/uc/as400_pase_64/R3load -testconnect" finished with return code 255. Output:exec(): 0509-036 Cannot load program /usr/sap/XD2/SYS/exe/uc/as400_pase_64/R3load because of the following errors:
0509-150 Dependent module os4apilib.so could not be loaded.
0509-022 Cannot load module os4apilib.so.
0509-026 System error: A file or directory in the path name does not exist.
0509-021 Additional errors occurred but are not reported.
ERROR 2009-01-30 17:32:06.068
CJSlibModule::writeError_impl()
CJS-30023 Process call '/usr/sap/XD2/SYS/exe/uc/as400_pase_64/R3load -testconnect' exits with error code 255. For details see log file(s) R3load.exe.log.
ERROR 2009-01-30 17:32:07.61 [sixxcstepexecute.cpp:940]
FCO-00011 The step testDatabaseConnection with step key |NW_Onehost|ind|ind|
ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|
ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|6|0|NW_ABAP_Import|ind|ind
|ind|ind|0|0|testDatabaseConnection was executed with status ERROR (Last error reported by the step :Process call '/usr/sap/XD2/SYS/exe/uc/as400_pase_64/
R3load -testconnect' exits with error code 255. For details see log file(s) R3load.exe.log.).
Thanks very much for any kinds of help provided here.
Best regards,
EffanI hardly remember how I resolved it, my friend. But start trying with latest installation master and kernel if that's a choice for you, maybe I loaded the latest ILE introduced by some notes. If it doesn't help, retry it and sort the installation directory by time sequence and then find all related logs. Please open a new thread for open discussion.
BTW, why not to install 7.11 if this is a new instance? I just finished one, it's still warm to support you.
Regards, -
SOAP service could not be loaded: premature end of file
Hi,
I am trying to call some web services using the Web Service action in the logic editor, but I am always getting some errors. For instance, for an online service (e.g. http://webservices.imacination.com/distance/Distance.jws) I am getting:
"SOAP service could not be loaded: Premature end of file."
I've tried 3 different web services that are available out there, and no result. I've laso tried writing it like this:
http://webservices.imacination.com/distance/Distance.jws/ or
http://webservices.imacination.com/distance/Distance.jws?wsdl
, but the result was the same.
I've also tried a web service that's currently deployed on my machine, using Tomcat. Here, I'm getting some slightly different errors:
http://localhost:8080/epcis-repository-0.2.0/capture/
SOAP service could not be loaded: the element type "HR" must be terminated by the matching end-tag "</hr>"
http://localhost:8080/epcis-repository-0.2.0/capture or
http://localhost:8080/epcis-repository-0.2.0/capture?wsdl
SOAP service could not be loaded: WSDLEXception (at /html): faultCode=INVALID_WSDL: Expected element 'definitions'.
As a note, this web service that I have deployed locally is also available online (http://demo.accada.org/epcis/capture), and if I try out this one, the error is again:
SOAP service could not be loaded: Premature end of file.
As far as I could tell, the /epcis/capture webservice is document/literal, so I don't think this should be a problem. I have read other posts about people having similar problems, but I could not find the answer to my problem...
Can anyone please help?
Thanks in advance!
AngelaHi,
Thanks a lot, everyone, for your answers! Yes, the firewall and the "rpc/encoded" encoding might explain why the first two web services did not work...
However, it does not explain why the web service installed locally does not work, since it is "document/literal" encoded, as far as I could tell..... And unfortunately, this one is the one that I need to connect to (the others I was only using for testing). Again, this is the error message that I get:
SOAP service could not be loaded: WSDLEXception (at /html): faultCode=INVALID_WSDL: Expected element definitions'.
Parts of the wsdl file are copied bellow, and I can't see anything wrong with it (certainly no <definitions/> missing):
<?xml version="1.0" encoding="UTF-8"?>
<!-- EPCIS QUERY SERVICE DEFINITIONS -->
<wsdl:definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:epcis="urn:epcglobal:epcis:xsd:1" xmlns:epcisq="urn:epcglobal:epcis-query:xsd:1" xmlns:epcglobal="urn:epcglobal:xsd:1" xmlns:impl="urn:epcglobal:epcis:wsdl:1" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" targetNamespace="urn:epcglobal:epcis:wsdl:1">
<wsdl:binding name="EPCISServiceBinding" type="impl:EPCISServicePortType">
<wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="getQueryNames">
<wsdlsoap:operation/>
<wsdl:input>
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
</wsdl:definitions>
As a side note, I now get the same error message if I try to connect from outside the company's firewall to the same web service available on the internet (http://demo.accada.org/epcis/capture?wsdl).
Does anyone have any more ideas?
Thank you once again in advance!
Angela
Maybe you are looking for
-
I can't delete an "event" in my photos on iphone
I have an album in my photos under "events" on my iphone. I'm not able to delete the album nor any of the photos in it. I don't know how to get rid of it. I thought connecting my iPhone to my iMac would help me but I was unable to find a way to de
-
How to set a curve-offset in my diagram
Hi, my VI gets values from an analog input in a loop, and draws these values in my diagram (voltage values). Now my curve will look like this: y | | _--_ |______---- ----_______ | | |___________________x Before my measurement starts, I have only a li
-
Gung Ho security team vs Debug with replace in development
Hi fellow developers. I'm trying to talk our security team off the ledge and I want to conduct an informal poll regarding the responsible use of debug with replace in a DEVELOPMENT environment. For the newer developers.. replace is much more powerfu
-
How to retrieve the video clip accidentally deleted on iPad 2
I deleted some video clips on my iPad 2 accidentally I would like to retrieve how do I do it? Please advice .
-
For some reason I can't seem to render those "green ones" I add an effect to a clip and it ends up showing a green render line and I want to completely render the clip so that I can playback with it being completely clear. Seems to be mostly having t