Why Flash and videos don't work after 10.6.7 update?
After os update Flash, Shockwave and videos stopped working on Safari. Also Flash CS5, Flash Builder 4 and Flash Catalyst CS5 stopped working. An error message on Flash CS5 "Error initializing Java Runtime Environment. You may need to reinstall Flash." I have uninstalled and reinstalled stuff, fixed the HDD errors etc but so far no solution. Is this simply error in update software made by some tired engineer?
2 Suggestions:
1) Try reinstalling Mac OS X 10.6.7 via Combo Update, it's a common troubleshooting step:
http://support.apple.com/kb/DL1361
2) Have you installed the latest Mac OS X Java Update 4?
http://support.apple.com/kb/DL1360
I would also suggest to check Adobe's Support Page to see if other users are experiencing the same:
www.adobe.com/support
Good Luck!
Similar Messages
-
Could someone explain to me why Flash virtual tours don't work after update to Flash Player 10.1?
Hello there,
Could someone explain to me why Flash virtual tours don't work after update to Flash Player 10.1?
Thanks!www.privium.nl
klick the icon image 'virtual tour' upper right corner.
This works on my other pc, on which I did not update to 10.1 ...
(I produced this virtual tour; it is stored on the FTP server of the service provider I use for this)
Awaiting your reply,
Regards, -
N73 Video Don't Work After Upgrade
Help please, i updated my N73 OS from V3.0638.0.0.1 to V3.0704.1.0.1. Now the video don't work anymore, it can't playback what is shot! anybody have suggestions?
Also, N73 seem to be very slow, how can i possibly have it more responsive? Right now, there is an irritating lag whenver you go to the diff functions.
Help would really be appreciated.If the lag presists after upgrading to version 3.x.05.x. try going to the camera settings and choosing to save on the PHONE MEMORY and try if it lags, IF NOT than memory card needs to be replaced with a faster one. If its still laggy then i don't know
-
Keyboard and Mouse don't work after upgrade
Hi, about one week ago, i've made a system wide upgrade and after reboot my keyboard and mouse stopped working. My hard disk is encrypted and without keyboard i remain at the prompt which asks my password to unlock the encrypted partitions. So i don't even arrive to login manager. I tried all the solutions i could find but none of them worked for me. I saw similar posts on the forum and i'm sorry if i'm posting it in wrong place.
Here is my Xorg.0.log file, it seems like because of hotplugging, xorg disables mouse and keyboard but i couldn't disable hotplugging with the given methods like adding flag to the /etc/X11/xorg.conf file:
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
I 've installed/deleted xf86-input-keyboard/mouse and reinstalled xf86-input-evdev etc and it didn't work.
I tried to downgrade to different versions of kernel, i didn't work.
There are "00-keyboard.conf" "10-evdev.conf" "10-quirks.conf" "50-synaptics.conf" files under /etc/X11/xorg.conf.d
So i don't know what to do else, i hope someone can help me.ewaller wrote:
When you boot to the Ubuntu system, before you chroot, look at the output of lsmod and note the modules in use. In particular, I am interested in modules that contain 'lpc', So try lsmod | grep lpc
lpc_ich 21163 0
Post the module names that that finds here. Also, look in your initrd for modules for the LPC bus driver. It does not exist in mine.
./usr/lib/modules
./usr/lib/modules/3.15.8-1-ARCH
./usr/lib/modules/3.15.8-1-ARCH/modules.alias.bin
./usr/lib/modules/3.15.8-1-ARCH/modules.builtin.bin
./usr/lib/modules/3.15.8-1-ARCH/modules.devname
./usr/lib/modules/3.15.8-1-ARCH/modules.dep.bin
./usr/lib/modules/3.15.8-1-ARCH/kernel
./usr/lib/modules/3.15.8-1-ARCH/kernel/padlock-aes.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd256.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish_common.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/tcrypt.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-mod.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/aes-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/af_alg.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/padlock-sha.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha512_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ccp.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/authenc.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ctr.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-aesni-avx-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-avx-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sr_mod.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha256-ssse3.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/glue_helper.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/md4.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rng-core.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/async_raid6_recov.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/async_tx.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/serio.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/seqiv.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-x86_64-3way.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ccp-crypto.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crypto_user.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/usb-common.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-region-hash.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crypto_null.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ansi_cprng.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cast5_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/hmac.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cast_common.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/deflate.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cdrom.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cmac.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rsa.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cast5-avx-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cast6_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/usb-storage.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/i8042.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/xts.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-avx2.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/scsi_mod.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/seed.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ehci-hcd.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/algif_skcipher.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/public_key.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/xor.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/zlib.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crc-t10dif.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/authencesn.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/mbcache.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/vmac.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha256_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sd_mod.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/async_pq.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/mpi.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/usbcore.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-crypt.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ehci-pci.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-log.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ecb.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/raid6_pq.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crc16.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/algif_hash.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32c_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent-sse2-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif_common.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-snapshot.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ccm.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/salsa20_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/blowfish-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-avx-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd128.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha1_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/xhci-hcd.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/camellia-aesni-avx2.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4_compress.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/raid6test.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/oid_registry.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/salsa20-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha512-ssse3.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd160.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/gf128mul.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4hc.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/gcm.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cts.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/xcbc.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/async_xor.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-mirror.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/x509_key_parser.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/asn1_decoder.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif-pclmul.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/aesni-intel.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crct10dif_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/usbhid.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/lrw.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ext4.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/dm-bufio.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/arc4.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/michael_mic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/libahci.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/uas.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/jbd2.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/tea.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32c-intel.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cast6-avx-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/sha1-ssse3.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/pcrypt.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/hid.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/fcrypt.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/des_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish-x86_64.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/libps2.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/pcbc.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/tgr192.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cbc.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ablk_helper.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/serpent_generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/asymmetric_keys.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/rmd320.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/anubis.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/khazad.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/libata.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ghash-clmulni-intel.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/async_memcpy.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/twofish_common.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ahci.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/wp512.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/lz4hc_compress.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/crc32-pclmul.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/atkbd.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/ghash-generic.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/md5.ko
./usr/lib/modules/3.15.8-1-ARCH/kernel/cryptd.ko
./usr/lib/modules/3.15.8-1-ARCH/modules.symbols.bin
But, my keyboard and touchpad don't exist in the ISA bus address space. Things that used to live on the 1980's vintage ISA bus (like serial UARTS and ancient keyboard controllers) are now serviced by the serial LPC bus. I think you don't have that driver available in the initrd preboot environment
Sorry, i'm not good at these things, so which driver i should install if it's the case? (By the way, i added atkbd to the MODULES= and "earlymodules=atkbd modules-load=atkbd" to the kernel parameters, but i didn't make any change.)
Pse wrote:
Note that you shouldn't do this as a permanent solution, but just to get through the bootloader issue for now, manually edit /boot/grub/grub.cfg and change the relevant lines to point to the LTS kernel (in other words, grub-mkconfig should NOT fail, but that's not your biggest problem right now). This way the entry that pointed to the common kernel should now point to the LTS one.
You can find the LTS kernel files in /boot; the names should give them away. Remember to change both the kernel and initrd lines in grub.cfg.
In fact, i also have done as you told(by changing lines to the lts) and read about the error that grub-mkconfig gives me. It says it's ok, error is not important it should work properly. So i have some problem with my bootloader. I can't see the boot option anyway. Problem must be about UEFI because i remember that i had booting problems also when i first installed arch to my computer. I see all lts and lts.img files under /boot directory but somehow don't see as boot option.
Anyway, thanks a lot for all your help, maybe i do something wrong, i can't solve the problen. I'm going to reinstall my system, because i don't have time anymore. I hope at least this post would be useful for somebody else. -
Thinkpad t42 mouse and keyboard don't work after factory reset
I get to the system preperation tool 2.0 but i cant click or select anything . Same thing happens if i turn the machine on and go into safe mode - the keyboard works to select safe mode but when I get to safe mode they both don't work. they both work if i go into the IBM recovery menu.
Any help would be appreciated
Thanks
DK
Solved!
Go to Solution.Hi DK,
If you are using the Rescue and Recovery to reload Windows, you should never see the "SysPrep 2.0" appear. Are you using the orignal recovery CDs to reload windows or booting from the F11 partition? To fix this problem, I would simply start the process of reinstalling Windows again.
Go to this website and follow the guide for Using Rescue and Recovery to Recover your OS
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70803
If you are still seeing the "System Preparation Tool 2.0" after reloading Windows, do the following:
Step 1: Under the "Options" box, make sure the following are checked:
"Don't reset grace period for activation"
"Use Mini-Setup
"Don't regenerate security identifiers"
Step 2: In the drop down menu for "Shutdown mode", change this setting to "Quit"
Step 3: Click the "Reseal" button
This should resolve your issue. Be sure to reload the OS using R&R FIRST before doing the above steps.
Regards,
Mark
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks -
ICal and Mail don't work after downgrade from Lion to Snow Leopard
Hey everyone, after an extremely awful time with with Lion (it knocked out of my audio interface AND my wireless) I downgraded back to Snow Leopard yesterday. I made a Carbon Copy of my Lion drive with all my data on an external drive (which I still have) and after wiping my local drive clean I reinstalled Snow Leopard from my disk. After it was done I chose to transfer data from another system local system (I selected everything) and an hour and a half later everything was transferred over. After doing a software update, I've found that I get big error messages with iCal, Mail, and even the App Store that say they can't open and I'm assuming that it has to do with incompatible data that got transferred from Lion. Any ideas on how to get those programs back up and running?? Thanks so much for you help!
Luke
ps. here's the error message from iCal
Dyld Error Message:
Symbol not found: _kSecOIDX509V1ValidityNotAfter
Referenced from: /System/Library/PrivateFrameworks/ApplePushService.framework/Versions/A/ApplePu shService
Expected in: /System/Library/Frameworks/Security.framework/Versions/A/Security
in /System/Library/PrivateFrameworks/ApplePushService.framework/Versions/A/ApplePu shService> In the device manager the two ports are listed under "other devices" and no driver is installed for them.
Indeed the USB issue seems to be related to missing drivers.
You have to install this USB 3.0 driver:
[AMD USB Driver v 2.0.7.176 Windows 7 - 64 Bit|http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=178&selProduct=7534&selSh ortMod=null&language=13&selOS=30&selType=all&yearu pload=&monthupload=&dayupload=&useDate=null&mode=a llMachines&search=&action=search&macId=&country=al l&selectedLanguage=13&type=all&page=3&ID=87792&OSI D=30&driverLanguage=42]
Furthermore you have to ensure that chipset driver was installed too.
The notebook supports ATI graphic chip and AMD chipset. The chipset driver is part of the ATI graphic card driver and therefore you should ensure that this driver would be installed too. -
Manually manage music and videos isn't working after iTunes update and iPhone 4 IOS5 update.
Just update my iPhone 4 to IOS5 and updated to the latest verison of iTunes also and now I can't manually put songs from my music folder into my iPhone's music section now. Normally I would just drag songs into my iPhone's music section but now it won't let me. I have Manually manage music and videos checked also. I'm also running Windows 7. Any help would be great.
I am having the exact same problem. Also with transfering PDF files. It's frustrating. ANY help would be appreciated. I also run W7. I have an iPod Touch 4.
-
Urgent! "ThinkVantage" button and F11 don't work after disk partition.
I just bought a ThinkPad T400 last week.
At first, I partitioned the C disk into 3 disks: C, D, E. I didn't change EISA partition.
Then I use "Rescure and Recover " to reinstall Vista and restore the system.
After it finished, I can enter Windows, but windows is not installed properly, without many funtions. And I can't install software to solve the problems because Windows Installer is no correctly installed. Furthermore, driver letters are changed, i.e., after restoring system, SW_Preload disk becomes "F:" instead of "C:" before restoring.
I then restarted the computer and want to rescure my T400 via "ThinkVantage". After pressing "ThinkVantage" button, system just asked me choose from "F1- BIOS, F11-Rescure". But when input "F11", the PC still can not enter "Rescure and Recovery" .
I searched Google about this, somebody said disk partition may lead to thinkvantage error. If it's the case, how to solve the problem?
Thanks a lot！
hankshi,
i have the same problem. i have t400 with vista. i try to enter into the recovery but it is not going. so since it was urgent i installed xp. i havent changed the partition size. now it is not even showing the f11 option to enter the recovery. initially when i tried to enter into the recovery a blue screen used to come and the message used to display. it said a problrm was detected and to prevent damage to the computer windows is shutting down. so i called lenovo and they sent me the recovery disk. but when i run the recovery disk it shows the screen windows is loading files. then again blue screen appears with the same old message. even that recovery disk is not entering into the recovery. i dont know what to do. if anyone knows what to do please let me know. my email address is [email protected]
Amar Deo -
Wi-Fi don´t work after 10.7.2 update
Help, before 10.7.2 a have a lot of problems with Wi-Fi, at least it drops two times a day, now after 10.7.2 update Wi-Fi don´t work, i can´t activate it, what i need to do?
I Have a MacBook 13-inch, Early 2008same here - 10.7.2 trashed my wifi connectivity. I have 2 networks running, a G and an N. My laptop running 10.7.1 sees both, my Mini running 10.7.2 only sees the G network - doesn't see the Airport Extreme running an N network.
What an absolute pile of dog doo-doo Lion is. So many many faults and problems, I so regret installing Lion. -
Source and Program Monitor not working after October CC 2014 Update
I updated to the October 2014 Replace of Premiere Pro and since then I have had major issues with the Source and Program monitors.
I can select a clip from the media browser and have it appear in the source monitor - click play. The clip will play for a bit and the picture will stop, but the audio will keep going. After a few seconds the source monitor will just display a red screen and the audio will keep going. The same things happens in the program monitor (different clips that worked before the October 2014 update) will start displaying the yellow media pending screen - and then go to red after a few seconds. Again - this is a mutli-camera sequence that worked before the October 2014 update.
I am pretty much dead in the water at this point. And yes, I have rebooted, changed the Mercury play back engine from hardware to software. Nothing seems to correct the issue.I have had similar problems. In fact playback is so sluggish it is unworkable.
In addition Audio in nested sequences doesn't play back, and when it does it is intermittent. Totally unworkable! -
Issue with Youtube and Flash Player, videos don't play after a while
When I go to Youtube I can watch videos, but after I've player 5 or 6, when I select the next one, I get a snowy screen with a message "The Adobe Flash Player is required for video playback. Get the latest Flash Player". Issues is I already have the latest Flash Player, and it was playing fine just a minute ago. But from then on I cannot play more videos until I restart the computer. I'm tired of reinstalling Flash every day.
Win 7 64 bits, IE 9 and Firefox (happens with both)
Flash Player 11.7.700.202
Apparently the browser at first recognizes that Flash is installed, but then it doesn't find it anymore. Not sure how that happens.strangest thing... a few 'non-youtube' sites still work ok, but still complain 'no javascript' ..
so went to firefox (v17.0.4 ESR) 'tools, options, content' and yup, javascript UNTICKED!! :O :O my bad memory? something else??? {shrugs}
ticked it, now ok........ think im getting old?????? ROFL.. -
I have a 2013 iMac and adobe flash and reader don't work, why.
I cannot open PDF's and adobe flash does not work what can I do?
I have ordered a 27inch late 2012 but your questions is puzzling. The pdf viewer is built into "quick look" and finder can even display thumbnails of pdf documents. Did you download a pdf viewer from adobe? Is a different program now set to be the default for opening pdfs? When you got the computer did you setup or migrate from an existing mac?
If you right click or command-click on a pdf, what are the options to view it? -
Hello!
Immediately upon updating to Beta 34.0, Silverlight and Flash, completely stopped working in Firefox. I am running Vista Home Premium, Service Pack 2.
They work fine in Internet Explorer.
This happens in any website I go to.
For example, I can go to Youtube, and the page will show a black box where the video should be, but there are no play controls, or any way to enable the video. Clicking within the black box does nothing.
On the music play site, Grooveshark, the site does not recognize Flash as being installed at all. (If you don't have Flash installed, this site pops up a message every time. Grooveshark correctly recognizes that Internet Explorer has Flash installed.)
I updated the Flash plugin to the current version, which also did nothing.
I have not reinstalled Firefox, or done a System Restore, yet.
I just bought a new computer that I was going to migrate to, and retire this computer, so I was not going to do heroic efforts to fix this. I was reporting this more on the order of a bug report.
Thanks.
KarlThis happened to me as well with Windows 7 32 bit (which I did as as upgrade from Vista Home Premium - if that might foul things up a bit) and affects Firefox 34.1 and IE. I did a system restore which took me back to Firefox 33 and Flash was fine. Later in the day Firefox updated back to 34.1 and I lost Flash again.
-
Using Firefox links, buttons checkboxes and so, don't work after first action on a webpage.
I have an irritating issue working in web pages. If I start a page and I have to click or select something it works the first time but the second time I first have to do an action outside Firefox before I can proceed working.
I can not check a check box, or select a value form a pull down list with the mouse. but I can navigate to that with the arrows and select with enter.
With Thunderbird I have the same issue.
I had this issue a year ago using Windows XP. I reinstalled the machine with Windows7 and that worked fine until now suddenly it comes back.
It is only the case in these two applications, the rest is working fine.
Is there anyone who can give me a solution?It doesn't use RAM memory. It uses memory from my HD. As soon as I close firefox because it don't respond I see the memory going back to normal. I will try now to uninstall/reinstall to see what will happen.
-
BI analysis auths and traces don't work after client copy
Hello,
We recently moved our BI Development to a new server. Now, the analysis authorizations I created and assigned to the S_RS_AUTH object are no longer working. And, the 'Execute as User' feature in rsecadmin transaction to trace a user is no longer working.
Do I need to regenerate something or reconfigure something?
I inherited this system and was not the original person to set up BI authorizations and traces so I do not know what steps may need to be repeated after a client copy.
Thanks, in advance, for any advice.Thank you Juilius.
It was actually our Developer who made changes to the reports I was testing and really didn't have anything to do with the client copy.
However, the trace functionaly was weird. I had to change a parameter on my user id to get it to work. So, actually, the client copy did change that setting.
Thanks much.
Penny
Maybe you are looking for
-
Hi SAP Gurus, I have done MIGO on 31st march, on 1st of April i am Posting in J1IEX, I am getting following error: Maintain number range object for object J1IRG23C2, year 2009, excise group E1_ Please tell me how to solve this error. Regards, Vijay
-
Used variable substitution to substiture the field 'date' in file name
Hi gurus I have used variable substitution to substiture the field 'date' (dd/MM/yyyy/hh/mm/ss) in the file name so when empty payload (a valid xml ) is generated by Message mapping then the communication channel is failing by showing the following e
-
Can I install and boot mac os x 10.6.8 on a new mac mini model A1347 which shipped with osx 10.8.3? I need to run an application customized using Mac OS X 10.6.8 on this new mini.
-
When you stored the user credentials in your key chain WGM uses it but the "Connect" Button remains disabled until you changes at least on char for the user name (e.g. delete and re-enter the last char for the user name)
-
greetings i use the code below to save an image to a litelob field in my lite windows mobile 10.3.3 client. can you please assist me into doing the opposite? i mean, how can i read the blob field from the oracle lite database and then save it to a fi