Why Flash Player Is Buffering Slow After Windows 8 Update

After I have updated my windows  8 in my HP Pavilion N-15 Core i-3 notebook, the flash player is running creepy and I am unable to watch and stream videos online.
That is very frustrating, I asked microsoft about this but they said there may be problem in flash player. I tried to figure out what causing this creepy streaming but haven't resolved this issue. Can any one help me over this?
Thanks

1.) Do you have the same issue in other browsers?
2.) Do you see an improvement when you disable hardware acceleration (instructions in the troubleshooting guide below):
     https://helpx.adobe.com/flash-player/kb/video-playback-issues.html
3.) Are you using any ad-blocking, anti-tracking, video capture plugins or software firewalls?  If so, what are they (include versions)?
If you're still stuck, please follow the directions in the guide on providing the dxdiag report and additional information about what you tested and saw.

Similar Messages

  • Flash Player about 3X slow after first use

    Recently updated to the latest version of Flash Player on a Win 7 x 64 machine. At first launch everything is perfect. But once the browser is closed (any browser) flash player slows down about 3X until I do a restart. Downgraded to an older version of FP, same behavior. This just started happening - any clue what it could be??

    Hello, I use XP/SP3 (home edition) and it is SP3-100427-1636 also along with IE6. I have Windows fully patched.
    You didn't say if you have all Windows updates but I assume you do. In August there was a cumulative Critical update for IE6, 7 and 8, so just wanted to mention that.
    Now of course I have had the same Flash Player version that you are using, but updated whenever it was available. The latest is now 10.1.85.3 which I use.
    The hardware acceleration must be working as it should for my system since I have not had to turn it off.
    What I would check is that the Shockwave Flash Object in the IE add ons is enabled and the same version of Flash Player that you are using(10.1.53.64)
    Whether using this site to turn off the hardware acceleration would make a difference or not I don't know, but you could try it.
    http://www.adobe.com/software/flash/about/  Right clicking on the Flash logo seems to be easier for most users, then click on Settings and then on Display Settings, UN check the box.
    Other than making sure the systems are fully patched and the SW Object is correct I don't know what would be causing the slowness. You could verify that the Flash files are correct, sometimes during an Uninstall of the older version of Flash Player an old file may have not been removed.
    Thanks,
    eidnolb

  • Adobe Flash Player Quits Buffering Shortly After Starting to Play

    Hello,
    I am having trouble with Adobe Flash Player v. 16.0.0.305 not playing through videos.  It buffers and plays for a short bit then stops.  On Chrome it stops 1:09 into the video and then stops; and then it looks like it continues to buffer.  On Firefox it just stops at 0:56; and does not look like it is buffering.  On Internet Explorer  it stops at 5:08 into the video and then just stops; and then does not look like it is buffering.  This is the same video tried on the three browsers mentioned above.  I am using Windows 7 on an I-3 Intel Processor with 8 GB of RAM and about 250 Gb of disk space on the C Drive.
    I have been through all of what is suggested on this page:  Flash Player games, video, or audio don't work | Windows
    I am totally stumped.  When I try to download the video; it only downloads partially as well; but it does play the short clip that is downloaded.
    I have been trying to figure this out for a couple of months now. 
    Does anyone have any insight as to what might be happening?  I appreciate it the help very much.
    Regards,
    Dave

    To anyone experiencing this problem after trying the steps I posted above, try this potential solution:
    # Open Tools->Add-Ons->Plugins, find Shockwave Flash, and press Disable
    # Hold down the '''Windows logo key''' and press '''R''' to bring up the ''Run'' dialog.
    # Type '''%APPDATA%''' and press OK.
    # Open the Adobe folder
    # Right click on the Flash Player folder and press '''Rename'''. Type in ''Old Flash Player'' as the new name.
    # Go back to the Application Data or AppData folder. (On Windows XP, click '''Up''' in the toolbar. On Windows 7 or Vista, click AppData in the address bar)
    # Open the Macromedia folder and repeat step #5
    # Go back to the add-ons window from step #1, and press Enable on Shockwave Flash
    # Try Farmville, Youtube, and other affected sites to see if the problem is fixed.

  • Flash Player stops playing games after most recent update.

    My father uses the website PCHGAMES.COM, daily.  He loves to play bingo.  Earlier this week Flash Player updates itself and now PCHGAMES.COM, bingo will not play.  It would let you chose which room to go to, and play the movie before the game, but when it gets to loading the room and chose the bingo cards all you get is a RED X.  After coming over to see what the issue was, and following all solutions on Flash Player games, video, or audio don't work | Windows page... The only solution that works is #7. Disable Flash Player hardware acceleration.  Once I followed these instructions, the bingo game played fine as long as he did not leave that page or window.  If he got bored and went to play another game and then came back to bingo it would not work again.  Then I would have to come back over and do #7. Disable Flash Player hardware acceleration, except this time it would be checking the box and Enable Flash Player hardware acceleration.  My father is disabled and doesn't understand why all of a sudden bingo will not work when it has been fine for 3 years.
    Currently his computer is using Windows Vista (32-bit), using IE Version 9.0.8112.16421, with Flash Player Version 11.1.102.63
    Is there any way to fix this other than having to come back to Adobe's site and enable or disable this checkbox every time he wants to play bingo?

    LW327, this is an issue that really annoys me! Laptop manufacturers produce their own 'custom' drivers that are actually, in most cases, exactly the same as generic drivers, except often years out of date! If there are actually any differences, then it's a few hooks into manufacturer installed programs, so installing a generic driver may, in the worst case, only cut down on some functionality with associated OEM supplied software.
    There are 2 ways around your problem to install the newest Intel driver:-
    1) Download the newest driver from Intel. Uninstall your current driver, reboot, and manually install the Intel one.
    2) Download the zip version of the Intel driver. Unzip it to a directory, then update your driver by picking the location where you unpacked the archive. This allows any checks that may scupper an install over the top of a custom driver to be avoided.
    Once you have the latest Intel driver installed, you'll get updates via Microsoft Update. There again, I just checked the Intel website and the latest G31/33 driver is dated May 2009, so installing it probably wont make any difference to your predicament. There again, the real issue here is that flash is messed up!

  • Why is my mac running slow after MOuntain Lion update??

    after i updated my Mac Book it starts to browse very slow..why????

    It doesn't sound like it, but you might try adding a different DNS server.
    In Network System prefs, select the network service you use (ethernet or WiFi).
    Click on Advanced.
    Click on DNS tab.
    Click the + button
    Enter these numbers:
    For OpenDNS: 208.67.222.222 and 208.67.220.220
    Or Google: 8.8.8.8 and 8.8.4.4

  • Why ill the flash player not intialize even after disabling firewall and antivisurs software

    Why will the flash player not intialize even after disabling firewall and anitvirus software?

    Windows XP and internet exployer?  I can get the flash player to begin the
    download but stops at about 50% initalization
    Greenleaf Compaction, Inc.
    142 W. Main
    P.O. Box 265
    Hopkins, MI  49328
    Phone:  1-877-552-9369
    Fax:  (269) 793-7298
    New email address: [removed]

  • After updating my Flash Player, the Auto Vector Mask window is now blank.

    After updating my Flash Player, the Auto Vector Mask window is now just a blank window.

    You can replace the "Auto Vector Mask" SWF file present at the "Fireworks installation folder/Configuration/Commands/Creative/Auto Vector Mask.swf ".
    If this doesn't work, then one of the reasons that it could be happening is if Firebug or Flash Firebug is installed.
    If you have either of those, can you uninstall them and relaunch Fireworks.
    Let me know if it works.

  • Why the flash player don't work after installing the video downloader add-on?

    I've installed and uninstall the Firefox mobile app several times to try and fix this issue. Every time I add the video downloader add-on the flash player won't let me tap to play videos anymore. I've tried to completely enable the flash but still didn't work. I've used this add on for a few months and it worked fine up until the last Firefox update. Without the add-on the flash player works fine but after I've added the video downloader add-on I would have to uninstall and reinstall the mobile spot to get the flash to work again. I really love to use this add-on that's the advantage that Firefox mobile app has over other web browser. Please tell me how I can fix this issue. THANKS

    Hello FRYDAE
    Welcome to SuMo help Forum,
    Thankyou for reaching us here
    About your problem , have you tried to clear your privacy/browsing data? And see if flash works?
    And you can try to disable the add-on, if you don't want to use it . and enable it again if you want to download a video .
    Cheers!

  • Adobe Flash Player 11 NOT working after several attempts to download, uninstall, & reinstall

    I have problems with Adobe Flash Player 11 NOT working after several attempts to download, then uninstall, & re-install. 
    I uninstalled the previous versions of Adobe Flash Player from my computer PRIOR to attempting to install the new 11 version, so now I'm unable to view videos, etc., 
    I'm using Windows Vista 32 bit, Internet Explorer 9.0 (which I closed when I got error messages during Adobe Flash Player 11 Installation.  I've  disabled my AVG -Virus also during the installation of Flash Player 11.   
    FYI, I'm not computer savvy so the YouTube video by Adobe Tech was too complicated to follow AND I'm unable to view  (DUH!) it since I have no Flash Player program installed (doesn't make sense!) .
    Thanks for keeping it simple (KISS for me).

    I've tried uninstalling and reinstalling some 30 times now ..rebooting, you name it.
    I haven't been able to use flash since Adobe kindly shoved that latest update down my computer's throat.
    Right after getting the 'successful' installation message I restart IE9 ..go to my channel on youtube and immediately get the message:
    The Adobe Flash Player is required for video playback.
    Get the latest Flash Player
    I tried Chrome and on two or three it worked but then even after closing out of them ..Chrome slowed down to a crawl and finally informed me that Flash had stopped working.
    This has entirely wasted 3 nights of my time. It is 2:30 am and I should have had at least 2hours sleep already to rise at 6:30 but no, thanks this I'm still up and no doubt millions of other computer users are having just as much fun.. Everyone I know that allowed the updates to install ..is having the same problem ..Chrome/IE9/Firefox ...you can truly call it Adobe's Universal Cluster ...
    I live with Adobe. At work we have 6 fully Adobied LR4/CS5 & 6/InDesign workstations. I'm a photographer using nothing but Adobe products and quite frankly I feel this is the worst treatment you have ever given your customers.
    Please stop the CYA and just fix the damm thing! I realize you didn't write it Chris but surely you can get Adobe management to address this instead of just trying to get their users to try and debug it for the airheads that released it. Has anyone stopped to consider the financial damage being done due to videos not playing the ads that support the sites and no doubt stream revenue to Adobe? These guys have rolled the online experience back 5 years minimum and Adobe will probably pay the price for it. Re-issue a working version and go back to the drawing board!

  • Macbook air adoble flash player doesn't work after installation

    macbook air adobe flash player doesn't work after installation

    If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 7. Back up all data before making any changes.
    Step 1
    You might have to log out or reboot before a Flash update takes effect.
    Step 2
    In the Safari preference window, select
    Privacy ▹ Remove All Website Data
    Close the window. Then select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.
    Step 3
    If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
    Step 4
    If you get a warning of a "blocked" or "outdated" plug-in, then from the menu bar select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Check Now. Quit and relaunch the browser.
    If the warning persists, triple-click anywhere in the line below on this page to select it:
    /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
    Right-click or control-click the highlighted text and select
    Services ▹ Open
    from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 5
    Open this folder as in Step 4:
    /Library/Internet Plug-Ins
    Delete the following item, or anything with a similar name, if present:
    Flash Player (failing).plugin  
    You may be prompted for your login password.
    Step 6
    Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
    Step 7
    If you get a "missing plug-in" error, select
    Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked
    Allow (or Enable) plug-ins
    Then click the button marked
    Manage Website Settings...
    if present and make sure that the website is not blocked for Flash.
    Step 8
    Select
    Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.

  • Flash player does not work in Windows 8 tiles

    Flash player does not work in Windows 8 start metro tile applications. Flash player also does not work in Windows 8 start tile internet explorer 10 1n windows 8. Flash player does work in Windows 8 desktop internet Explorer 10. I tried all of the recommended fixes suggested by adobe Flash Player Issues/windows 8 page. I have reinstalled Windows 8 operating system.  What should I try next?

    This is a known issue with Flash Pro CC - GM build.
    this crash has been fixed in the update that was released recently. Please update to 13.0.1.808 version and it should fix this.
    Please reply if it still persists after the update.
    -Sujai

  • Adobe Flash Player in Internet Explorer 11 (Windows 8.1)

    Hello
    I am having a problem with Flash in IE 11 / Win 8.1.  I understand it is embedded.  But I keep getting the window at the bottom of the screen saying this webpage wants to run the following add-on 'Adobe Flash Player' from 'Microsoft Windows Third Party Application Component....'   I click allow and the message keeps coming back.   On top of this, Flash will not work.
    I have a feeling there is something corrupted.  I have tried to download an update (kb3004150) and it says I already have this on my system.  I also have tried to install it manually using the install_flash_player_ax.exe file, but to no avail.
    What do I need to do to fix this and why aren't there other options on Adobe's site?
    Thank you!!!

    Adjusting the ActiveX Filtering settings should help you resolve those "Do you want to allow Flash Player" prompts:
    Use ActiveX filtering - Windows Help
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

  • Flash player won't install in windows 7

    Flash player won't install in windows 7
    This is what I get when trying to use "FLASH PLAYER HELP", as you can see, my flash player and OS are NOT listed and when asked on left side of screen if "THIS WAS HELPFUL", I clicked NO and could not complete my response.
    HOW DO I FIX THIS??? THERE ARE SEVERAL ITEMS THAT REQUIRE FLASH PLAYER & I CANNOT GET IT TO WORK. AFTER DOWNLOADING (AT LEAST4 TIMES) IT SAYS EVERYTIME "INSTALLATION SUCCESSFUL"

    Download the offline installer from http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header and save it to disk, then close all browser windows and run the downloaded installer.
    If you still have problems, please post the contents of the FlashInstall.log file in
    C:\Windows\system32\Macromed\Flash
    C:\Windows\syswow64\Macromed\Flash
    [topic moved to Flash Player forum]

  • I want an alternative to Adobe flash player plug-in for my Windows 8 computer 64 bit

    I am so sick of Adobe flash player plug-in not being responsive with Firefox
    can you recommend an alternative to Adobe flash player plug-in for my Windows 8 computer 64 bit
    thanks
    [email protected]

    Mozilla is currently developing an open standards-based Flash renderer called Shumway.
    https://developer.mozilla.org/en-US/docs/Mozilla/Projects/Shumway
    Available as an extension [http://mozilla.github.io/shumway/extension/firefox/shumway.xpi here]. ''< click to launch the add-on installer.''
    ''It seems to work fine on YouTube videos in the Firefox 31 release version, although it is somewhat CPU intensive.''
    And also available in the Nightly development versions.
    http://nightly.mozilla.org/
    Feel free to try it out, but make sure you install it into its' own Program Files folderset and make sure you create a unique Profile for use only with Nightly. If the same Profile is used with both Release and pre-release versions problems sometimes arise after switching back and forth between different versions of Firefox. Basically, Nightly is like 18 weeks ''(at a minimum)'' removed from becoming a release version, but some projects stay on Nightly for a longer time as they are being developed. That happens to provide as many user / testers as possible, by not resorting to a separate development trunk version.

  • Flash Player 10.1  Slow on 90% of our computers

    Our company is experiencing issue with Flash Player 10.1.
    We have literally 100s of PCs that our folks use to take training and they are experiencing issues with the swfs running extremely slow.  Choppy is a better way to describe it.
    We have
    version 10,1,53,64 installed
    Most PCs have the same setup.
    CPU
    Intel Core 2 Duo E7300 @ 2.66
    Display Driver
    Intel 4 Series Internal Chipset
    2 GB of Ram in each
    Running:
    Windows XP Pro
    We have seen the issue consistently in version of IE 6 and 8
    On IE 6.0 browsers we consistently see the issue with version SP3 - 100427-1636
    The same version of flash seems to run fine on earlier versions of IE 6.0 such as SP3 100-216-15144
    I've read all the documentation about disabling pc and flash acceleration.  Upchucking those items has no impact on flash performance.  We've also updated GFX drives on a couple of PCs and that too has had no impact on flash performance.
    One thing to note... On computers with the issue, when we right click to uncheck the hardware acceleration, there is a lag in that process.  If we uncheck the box, it takes a second to respond.  The same goes for the other options in that window.  On computers where we don't see the lag, the settings update instantly.
    Our computers meet the minimum system requirements for Flash 10.1.  We did not appear to have this issue with Flash Player 10. 
    Any suggestions you could provide other than sending me to the minimum system requirements page or telling me to make sure my graphics drivers have been updated would be much appreciated.
    Thank you,
    Aaron

    Hello, I use XP/SP3 (home edition) and it is SP3-100427-1636 also along with IE6. I have Windows fully patched.
    You didn't say if you have all Windows updates but I assume you do. In August there was a cumulative Critical update for IE6, 7 and 8, so just wanted to mention that.
    Now of course I have had the same Flash Player version that you are using, but updated whenever it was available. The latest is now 10.1.85.3 which I use.
    The hardware acceleration must be working as it should for my system since I have not had to turn it off.
    What I would check is that the Shockwave Flash Object in the IE add ons is enabled and the same version of Flash Player that you are using(10.1.53.64)
    Whether using this site to turn off the hardware acceleration would make a difference or not I don't know, but you could try it.
    http://www.adobe.com/software/flash/about/  Right clicking on the Flash logo seems to be easier for most users, then click on Settings and then on Display Settings, UN check the box.
    Other than making sure the systems are fully patched and the SW Object is correct I don't know what would be causing the slowness. You could verify that the Flash files are correct, sometimes during an Uninstall of the older version of Flash Player an old file may have not been removed.
    Thanks,
    eidnolb

Maybe you are looking for

  • F110 Payment

    Hi, I had a unique requirement for F110, One of our client wants to pay bills which are getting due on 30/06/2008 and this process will be carried out for another 30 days or so (i mean till 15th-Aug-08). During this period they might also enter Vendo

  • This is quite strange... Fast/Turbo setting.

    I had been running my computer on fast mode, and my temps were quite high.. idle at 50-52c... Someone suggested turning off turbo mode to lower temps, well, since i wasnt using it in the first place.. I turned it on. And well, it lowered my temps. Im

  • Hyper-V on Windows 7.

    Does this operation system extensions for deploing Hyper-V?

  • Bridge: Stapelverarbeitung Bildgröße

    Asche auf mein Haupt! - Verzeiht bitte die Frage eines Newcommers: Ich habe in Bridge ein Unterverzeichnis mit etlichen Bildern geöffnet, die ich in einem Rutsch für's Indernett verkleiner will. Einen Stapel mit allen Bildern habe ich schon angelegt,

  • Dependency Question: jnc from AUR

    Hi, I do "maintain" one package in AUR (jnc) and have a dependency question about this package: I built an extra package for x86_64 because of some dependency issues on my machine, but after uploading I recognised, that the issues comes with the juni