Why function SAP_CONVERT_TO_XLS_FORMAT does NOT exist on BI 7.0?
We are trying to find a function in ABAP program to download SAP table data to an excel file. We have tried the following two function on our BI 7.0 system:
1. function: GUI_DOWNLOAD
Exist, but when run it with following code, get the error msg "Wrong value of the parameter FILETYPE"
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:test\test.xls'
filetype = 'XLS'
TABLES
data_tab = itab.
2. function SAP_CONVERT_TO_XLS_FORMAT:
Does NOT exist in our BI 7.0 system. Could we create a new function on our BI system by referring to a R3 system if this function exist on our R3 system?
Thanks!
Hello,
you could just check the OSS-Note 722513, which combinations specially in the SAPGUI - Versions support Excel 2007. Think normally it's the 7.10 version.
Regards Wolfgang
Similar Messages
-
Function module does not exist in ECC 6.0
Hi All,
These two below function module does not exist in ECC 6.0 but exist in 4.6.Could you please let me know replacement of these two's.
FI_DOCUMENT_ARCH_READ_SINGLE
CHECK_IBAN_ACTIVE
Thanks
MohitHi,
Thanks for your reply.Could you please give me example that how to use it.
Thanks
Mohit -
Function SET_AQ_PROPAGATIONWALLET does not exist ???
Hello,
I have a question regardint the httpS propgation, in the document Oracle® Streams Advanced Queuing User's Guide and Reference Release 10.1 Part Number B10785-01, it is refenreces EXECUTE DBMS_AQADM.SET_AQ_PROPAGATIONWALLET('/home/myuid/cwallet.sso', 'welcome');
But the function SET_AQ_PROPAGATIONWALLET does not exists, in the dbms_aqadm package. When I reference to an earlier docment version, it's no more mentionned and neither an alternative. My question is is there anything, a config or process, with replace this procedure so that we can use the wallet for the https propagation ?
Thansk for all,
PascalI have contacted the person that wrote the document you cite and asked them to respond in this thread.
I can find no evidence that the procedure exists. -
Error in ERM: Function module does not exist
Hi all,
Lately, we are experiencing a frequent error in ERM (5.3 SP 15.0) that we had not had before. We are unsure what caused the error. The message displayed to the user is "Unhandled error". The log error message is "Message Code is 651 Messsage Details Function module does not exist Message Type is E" (see full logs below).
The error occurs for example, when users are trying to generate derived roles after saving the org values for the derived role during the methodology process, or when administrators are trying to update the impacted derived roles after for org value mappings.
Has anyone experienced this or someting similar before? Any ideas what could be the reason here?
Thanks!
Patrick
Edited by: Patrick Weyers on Sep 15, 2011 9:36 AMLog extract:
2011-09-15 09:05:15,103 [SAPEngine_Application_Thread[impl:3]_18] ERROR Message Code is 651 Messsage Details Function module does not exist Message Type is E
java.lang.Throwable: Message Code is 651 Messsage Details Function module does not exist Message Type is E
at com.virsa.re.service.sap.dao.ManageAuthDataDAO.getAuthorizationData(ManageAuthDataDAO.java:1064)
at com.virsa.re.bo.impl.AuthorizationDataBO.getNewTransactionObjects(AuthorizationDataBO.java:821)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.addObjsForNewTxns(AuthAuthorizationDataAction.java:3527)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.reloadTransactions(AuthAuthorizationDataAction.java:4128)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.execute(AuthAuthorizationDataAction.java:157)
at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:286)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
2011-09-15 09:05:15,105 [SAPEngine_Application_Thread[impl:3]_18] ERROR com.virsa.re.role.actions.AuthAuthorizationDataAction
java.lang.Throwable: java.lang.NullPointerException
at com.virsa.re.service.sap.dao.ManageAuthDataDAO.getAuthorizationData(ManageAuthDataDAO.java:1084)
at com.virsa.re.bo.impl.AuthorizationDataBO.getNewTransactionObjects(AuthorizationDataBO.java:821)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.addObjsForNewTxns(AuthAuthorizationDataAction.java:3527)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.reloadTransactions(AuthAuthorizationDataAction.java:4128)
at com.virsa.re.role.actions.AuthAuthorizationDataAction.execute(AuthAuthorizationDataAction.java:157)
at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:286)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) -
Error "Function G1 does not exist "
Hi ,
While doing monitoring got error " Function G1 does not exist ".
Bdoc type : BUPA_REL
Sate : E04.
Checked SMQ1,SMQ2 , no queues were in sysfail status.How to maintain this function.
Help me how to clear .
Thanks in advance, Regards,
PA.Hi ,
May be your customization settings was not replicated correctly.
In R/3 you have Contact person function G1 and it doesn't exist in CRM.
You can check it : go to BP trn => open an organisation that has contact person =>relationship tab => double click on contact person => In "Contact person data "frame you will see field "function" => press F4 and check existing values.
Those values should be same as in R/3 system.If not - check your customization objects synchronization.
Hope, it's help
Rika -
Function 0012 does not exist when saving contact???
Has anyone seen these before??
I also get Function 0022 does not exist errors also?
ThanksHi,
If you want any particular or number of fields output in UPPER case for an RT service, open the particular service related job in work space area-> open the particular query transform-> select the output schema -> select the field on which you want to apply UPPER case. In the field related Mapping area you will find the TABLE_NAME.FIELD_NAME structure, go to start of the TABLE_NAME in the same structure -> select FUNCTION..from the Function Category -> select String Function, from the function name select UPPER -> click Next, don't select anything from Input String drop down box simply click on Finish.
it will show you following structure:
UPPER()TABLE_NAME.FIELD_NAME , drag drop tablename.fieldname in UPPER function. After doing this it should show as:
UPPER(TABLE_NAME.FIELD_NAME)
Save the program and Execute..Output for particular field will display in UPPER case.
Hope this helps.. -
XI datasources function modules does not exist after BW upgrade to 7.3
We have recently upgraded our dev BI system to 7.3
During our testing phase we found that we are unable to load data coming from XI system.
When we checked the functional modules of the XI(web services)
datasources we found that the function modules does not exist in the system.
Eg : For our GECARS datasource we have 2 funcitonal modules
1. /BIO/QI6AZXH_ZIFIGECARS
2. /BIO/QI6AZXH_ZIFIGECARS_RFC (delta function module)
we have activated resp datasource and found that code for
/BIO/QI6AZXH_ZIFIGECARS exist now but we are facing issues with RFC
funciton modules (/BIO/QI6AZXH_ZIFIGECARS_RFC )
To put it in simple terms we are facing issues with Dev BI since upgradeto 7.3 with respect to RFC and non-availability of function modules.
Kindly help us in resolving this.
Thanks,
KiranHello Kiran,
Have you found the reason for the non existence of the FM in the system after the upgrade?
Have you found any alternative? I hope you would have created an OSS message, if so whats the response have you got?
Kindly let me know as I am experiencing similar issue where one of the FM (RSDRC_MULTIPROV_GET_MAPPING) does not exist in BI system after the upgrade.
Regards,
Vinoth V -
Hi Gurus,
I'm trying to transfer a few business partners within CRM server using:
Basic type: CRMXIF_PARTNER_REL_SAVE_M02
Message Type CRMXIF_PARTNER_REL_SAVE_M
In a few of the BP IDocs I get the error (Status 51) saying "Function 27 does not exist".
Can you throw any light on this?
Thanks & Regards,
RahulHi
Status 51 is not an technical error. It will occur due to incorrect or impure data in the idoc
Jus check the idoc segments whether it is carrying the correct data in the correct segments.
Jus get into the details of this error.
Once you have fixed this error with the help of business / functional consultants then you can resend or reprocess this idoc using RBDMANI2 Program.
Cheers,
Hakim -
When I try to start Windows installer in Services.msc, it gives me this error Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration. How do I fix this? I am running Windows 7 ultimate.
Hi,
Based on the error code, we can use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration for Windows Installer service.
Besides, the following two threads focus on the similar issue and can be referred to as reference.
Error 1297: "ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE 1297” FTP service in Windows 7 computer
http://social.technet.microsoft.com/Forums/windows/en-US/52329b48-1ba9-4cab-a6b2-efd8db173625/error-1297-errorincompatibleserviceprivilege-1297-ftp-service-in-windows-7-computer?forum=w7itpronetworking
Service fails to start, error 1297 and 7000
http://social.technet.microsoft.com/Forums/windowsserver/en-US/419ba006-4413-4036-8c49-252b08593131/service-fails-to-start-error-1297-and-7000?forum=winserverDS
Hope it helps.
Best regards,
Frank Shen -
Partner function BP does not exist in partner procedure
Hi experts,
I have met the error message "partner function BP does not exist in partner procedure". I think there must be something wrong with my partner determinatino procedure. Is there any clue how I should check it?
Thank you for your help in advance.
Best regards,
FanHi Fan Mau,
Go to "VOPA/VOPAN" and check the partner procedure associated with the account group of you customer(You can get the account group of customer "EXTRAS-ADMINISTRATIVE DATA). If its coming in the sales order header /item ,go to the same transaction "VOPA" AND CHECK THE PROCEDURE ASSOCIATED WITH YOUR SALES ORDER HEADER/ITEM. Kindly please let me know If you need any more information on this.
Regards
Ram Pedarla -
When I create an event on my mac ical then sync to my iphone, I cannot later edit the event via my iphone. I used to be able to do this before. Can someone please tell me why this option does not exist anymore? I have iphone 3Gs and can't use iCloud due to older running system on my macbook pro.
Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card. -
Function Module Does not exist
Hello Experts,
I am trying to run the initialization for the Billing conditions 2lis_13_vdkon datasource.
Job is getting cancelled and the following error messages are coming when i check the job log in source system
Job started
Step 001 started (program SBIE0001, variant &0000000006238, user ID BASIS
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 2LIS_13_VDKON
RLOGSYS = BWDCLNT900
REQUNR = REQU_DHKONXGA1B82HZ49O94KQ03C4
UPDMODE = C
LANGUAGES = *
* Current Values for Selected Profile Parameters *
* abap/heap_area_nondia......... 2000683008
* abap/heap_area_total.......... 2000683008
* abap/heaplimit................ 40894464
* zcsa/installed_languages...... ED
* zcsa/system_language.......... E
* ztta/max_memreq_MB............ 2047
* ztta/roll_area................ 3000320
* ztta/roll_extension........... 2000683008
Function module /BI0/QI2LIS_13_VDKON does not exist
You can only use LIKE and TYPE to specify types in RFC
Internal session terminated with a runtime error (see ST22)
Job cancelled
even when i check in ST22
Category
ABAP Programming Error
Runtime Errors
IMPORT_ALIGNMENT_MISMATCH
Except.
CX_SY_IMPORT_MISMATCH_ERROR
ABAP Program
SAPLMCEX
Application Component LO-LIS
Date and Time
06.05.2014 12:30:28
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "MCEX_BW_LO_API" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing object "MC13VD0KON_TAB", the structure did not match the
structure of the target object. The error occurred in component
no. 21.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
How to correct the error
There is a probably a new version of the program active that does
not match the dataset. The data may not have been converted.
It is also possible that the field type of the imported field
has been changed in the Data Dictionary.
Try to eliminate the error by regenerating the program "SAPLMCEX". To
do this, proceed as follows:
Call Transaction SE38 in the R/3 System, enter the program
name "SAPLMCEX" and then choose "Generate".
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"IMPORT_ALIGNMENT_MISMATCH" "CX_SY_IMPORT_MISMATCH_ERROR"
"SAPLMCEX" or "LMCEXU06"
"MCEX_BW_LO_API"
If you cannot solve the problem yourself and want to send an error
please help me in this regards
Quick response will be appreciated.
Thanks in advanceHi Ram,
no upgrades recently
they have taken backup from production server.
now i am facing this prob in development server.
when i am trying to check in RSA3 it is throwing same short dump
as u said i did all the re activations still i am facing the same issue.
please give me some other sol...
thanks,
srikanth Putta' -
Error EU 802: Function Module does not exist
Hello everyone!
While running a DTP, I'm getting the following error:
EU 802: Function Module RSD_YPERSON_TXT_GET does not exist
Anyone has any idea what this is about?
Thanks in advance for your responses!
Best Regards,
Luís.Hi,
I have resolved this issue. Turns out that I was mapping a source field INPER (In-Period) directly to 0CALMONTH. The problem is that this source field can have more than 12 periods per year.
The error message was totally misleading... there's SAP for you
Points assigned for the effort.
Best regards,
Luís. -
Function Module does not exist error during query run time.
Hi,
During the execution of one of our queries we get the error "Function module RSD_(InfoObject Tech Name)_TXT_GET does not exist.
Now, this InfoObject is used in the query as a filter to restrict on certain values.
I searched in SE37 and no such function exists.
Let me know if you have any suggestions/resolutions to this issue.
Thanks,
AR.even if the question is quite old already, maybe some other people need the answer to this, too:
In our case this error which Sudhir Anandarao describes meant, that there was no data found for given input. This is quite strange, but definitly was the source as I dont get the error if something is found by the query. The Query, InfoObject were correct, just the data asked for was wrong (like get me all ID's greater than 5, if there are only ID's smaller or equal 5 it would state "Function module RSD_(InfoObject Tech Name)_TXT_GET does not exist.") -
RSAR_TRFC_DATA_RECEIVED Function module does not exist or EXCEPTION raised
Dear All,
We have 2 production systems one is a APO server & the other being BW server.
While checking in SM58 of our APO production server we found that so many entries were in error saying "ERROR REQU_<number> PG# 12 In BW" with target system as BWCLNT<CLIENT NO>.
We checked in both the production systems for any job failure w.r.t same time span but could find nothing.
When we tried to solve this by using F6 option to re-execute the LUW it says "Functional Module doesnot exists or Exception Raised". After doing checks it was found out that the Functional Module (RSAR_TRFC_DATA_RECEIVED) was existing . So we need to know about how we can solve this EXCEPTION RAISED issue.
Thanks & Regards,
SAPAPO
Edited by: SAP-APO on Dec 30, 2009 8:38 AMHi,
This migth be problem with not catching exact exception in the code.There might be data you are passing which not getting caught by the exception.
If you are using any code add this FM in the code or else try to debug where exactly u r facing this problem.
Regards,
Shiva Kumar G.C
Maybe you are looking for
-
When I send a message in a group with non-iPhone users it appears as "New Multimedia Message." One of my friends in the group also has an iPhone and his doesn't appear this way, how do I change my settings so it appears as a normal text message and n
-
Error when run "Rollback Run" request...
Hi, when i run the request "Rollback Run",i get the following error: +++++++++++++++++++++++++++++++++++++++++++++++ HR_6858_HRPROC_INV_PROC_NAME APP-PAY-06858: Invalid process name. Cause: an invalid process name, i.e. not in the following list has
-
Wallstreet G3 top left quarter of my screen not working.
I have a PowerBook G3 (Wallstreet), and had OS 8.5 installed and running fine. I have recently upgraded to Tiger using Xpostfacto adn now have a problem with my display. If the screen resolution colour is set to Thousands I have different coloured li
-
If I drag and drop ripped songs out of itunes why do I get two files appearing
hi wondering why I see two files (that appear identical in name) appear when I drag and drop previously ripped songs out of my itunes library. For example I've noticed this when I drag and drop songs on to the desktop and then I drag them from there
-
C6-01: how to clean call speaker?
Hi, I have a C6-01 and after using it for about two months, I can see some dust acumulated inside the cavity where the call speaker is located. What's the recommended way for cleaning it? I suppose that just blowing air into the cavity is not a good