Why GPS symbols cannot exit after i exit ovi maps ...

i have one something problem for my hp nokia n86,
why gps symbols cannot exit  after i close my ovi map. after i exit ovi  maps the gps symbols still display, please help me for solved this problem , i used firmware 30.009, latest ovi maps v3.04

Okay then, the best solution maybe to remove Ovi Maps from your phone, backup all your contacts, messages etc. (not settings)  to memory card or PC, remove the memory card and then try the resets in the order below, then re-installing Ovi Maps. Please note, if you don't back up your phone's data before resetting, you will lose everything!
Factory settings reset. In standby, dial *#7780# and the phone's security code (the nokia's default security code is 12345). This reset restores phone's original settings.
Soft reset. In standby dial *#7370# and the phone's security code. Soft reset deletes ALL your phone's data!
Hard reset (the three key code/reset). Turn off the phone. Press and hold three keys together, the green/talk key, the * key and the number '3'.Then, turn on the phone and don't let the three keys before you see the nokia hands logo/nokia boot up screen.  Hard reset also deletes ALL data on your phone!
Good luck!

Similar Messages

  • N8, unable to check-in after updating to ovi map 3...

    I cannot use my check-in function as it keeps saying system error after updating the ovi map.
    the version is 3.06 11wk10 b01 with map version 0.2.42.122.
    my n8 is in PR 1.1  013.016
    please help Nokia!
    Solved!
    Go to Solution.

    Unfortunally I would recommend a factory reset of the device
    You cant uninstall Ovi Maps 3.06, and if you get a system error its usually the software that isnt installed properly somehow.
    If you dont already got it, download and install Nokia Ovi Suite from www.nokia.com/ovisuite
    Start Ovi Suite and follow the guide to connect your phone.
    Do a Backup of your phones content via Tools -> Backup (in Ovi Suite)(Be aware that e-mail accounts and programs might not be in the backup)
    Disconnect phone from computer
    On the phone press Call, then typ *#7370#
    Phone will restart.(This will remove your personal content from Phone memory and Mass memory)
    Set time and Date (and timezone) correctly on the phone.
    Connect phone to Ovi Suite.
    In Ovi Suite choose Tools -> Restore.
    Restore your backup (I would advice you to not restore 'settings')
    Try and download latest Ovi Maps via Ovi Store in phone.

  • Why the calculator cannot found after update to ios6.1?but it is found in iphone5.

    Apple
    Support
    Mac
    iPod
    iPhone
    iPad
    iTunes
    Support
    Apple Support Communities
    Welcome, JanusTD(Sign out)
    NewYour StuffHistoryBrowse
    Search for:  Search
    Apple Support Communities > iPad > Using iPad
    Start a New Discussion in Using iPad
    You can not post a blank message. Please type your message and try again.
    Subject:

    The Calculator app will appear on iPhone 5s but not on iPads. If you want a Calculator on your iPad visit the App Store. There are several there to choose from.

  • Favorites problem after upgrading to ovi maps

    I just upgraded my 5800 to ovi maps using the Nokia Maps updater. Everything seems to work except for one significant problem. Although all my old favorites are still there, when I go to the favorites menu, there is no text in the menu items, or the text is the same black color as the packground. I can see little icons, and i can go to my places if i remember that is the 2nd item on the menu and there I can see a number of items equal to my favorites, with little icons and also no text. I have to blindly select and discard till I get the one I was lloking for. Once selected though, they appear on the map just fine. Please help.

    Do you have many pictures?
    Have your tried to reinstall the phone software using SUS to check if the problem remains?
    http://www.sonymobile.com/gb/tools/update-service/
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Restart mobile after start new Ovi Maps in my N8

    Hello ALL,
    I have just updated my mobile phone (N8) with the last software version (Ovi Maps, Quick search uodate, Apps update).
    Since then my mobile phone restarts when the Ovi Maps  application is launched.
    What do you suggest?
    I thought this new version would improve my N8.
    Thanks all

    It does improve the phone for most N8's, mine included. There must be a problem with your settings. Nokia Care have has suggested you post c:\ovimapsinstaller.txt for analysis in case of upgrade problems!

  • PulseAudio: Why does its daemon exit after idling 20s?

    By default PulseAudio exits its daemon after 20 seconds of idle time:
    # Terminate the daemon when idle and the specified number of seconds passed.
    ; exit-idle-time = 20
    1) Why is that?
    2) After it exited, how do I automatically start PulseAudio again afterwards on demand?
    3) Is it relevant for battery life? Or can I simply set exit-idle-time to "-1" and be done with it?
    Thanks in advance!

    ngoonee wrote:2) You shouldn't have to do anything, it'll autostart when requested
    Interesting. It does not auto-start for me. I am using xmonad, I am running dbus as a daemon (I suppose because the wiki told me) and I put "pulseaudio --start" in .xinitrc.
    What am I missing?
    Last edited by Markus00000 (2012-03-18 10:23:36)

  • E52 internal GPS fix problem only with OVI Maps

    Hi all,
    I read many many E52 phones suffer Internal GPS fix problems.
    I don't beleve this is an hardware problem, but only a software bug.
    My experiments say this:
    1) Start phone, start Ovi Maps -> No lock at all. (only 1 blinking line in bottom left corner)
    2) Start phone, start McGuider (Sygic) navigator -> E52 locks quite immedeately. (in the same place!!)
    3) After GPS is locked, start Ovi Maps again. Now also Maps works great!
    4) Also the gps built-in application under Menu->Applications->GPS->GPS Data has the same behaviour as Ovi Maps.
    Anyone can try and report this or similar experience?
    Thank you!

    uallaualla wrote:
    Thank you for the response.
    I'm sure the fix is faster if i use A-GPS, but i i have to pay for data connection.
    And, above all, Sygic works perfectly WITHOUT A-GPS, so why Ovi Maps does not?
    Yes, you have to pay, but the connection takes about 20sec. About Sygic you're right I noticed that too. It locks pretty fast.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Ovi Maps 3 don´t start after firmware update (6220...

    Hello!
    a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
    After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
    But Nokia Map Updater says, there are no updates for my maps.
    What´s wrong?
    Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
    thanks

    Hello!
    The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
    But in the meantime I have found a solution!!
    I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
    I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
     thanks
    sorry for my bad English

  • User Exit after creation of Production Order

    Hello gurus.
    I would like to populate a table with the Production Order number once I create the document in transaction CO01. The problem is, I cannot find a user exit that can be executed after I save the Production Order number.
    We use internal assignment of production order numbers, so we don't know the number of the document until it's created. I'd like to find a way to be able to get the number of the document, once it's created and add it in a custom table I created.
    Is there a User Exit for this? Or maybe an alternative way of achieving this?
    Thank you.

    Fernando,
    I would suggest you to create a custom table and custom program. The program should pick up the all the orders which were created from AFKO table, on successful completion of running the program it should update the custom table with the date and completion time. So next time when this program is run, it should pick up order who's creation date and time is greater than that in the custom table. You can schedule to run this program in background.
    Regards,
    Prasobh

  • My problem is- when I touch color picker all functions stop and I cannot do enything  even exit.

    My problem is- when I touch color picker all functions stop and I cannot do enything  even exit.

    What operating and version of photoshop are you using?
    It sounds like the color picker dialog is opening off screen and that's why photoshop seems to lock up.
    (you should be able to press the Esc key to dismiss the the hidden color picker dialog)
    Do you have or had dual monitors?
    Have you changed the screen resolution recently?
    Anyway, resetting the photoshop preferences will probably gets things working again:
    http://forums.adobe.com/thread/375776?tstart=0

  • Why can I no longer, after having downloaded Lion, write accents and other diacriticals when in the Google, Yahoo, FaceBook, or even here in this post? The new method for getting at the "option" symbols works fine in other places like spotlight, but now e

    Why can I no longer, after having downloaded Lion, write accents and other diacriticals when in the Google, Yahoo, FaceBook, or even here in this post? The new method for getting at the "option" symbols works fine in other places like spotlight, but now even the older "option+letter" doesn't work in most places.

    Chrome doesn't support the new accent/diacritics/macron chooser. I'm not sure about other browsers such as Firefox. You can use the old Option+letter combination that Doug suggested. Hopefully updates will solve these little incompatibilities shortly.
    Neill

  • After install of 8.1.5 SQLLDR.EXE wont exit after sucessful load.

    After installing 8.1.5, SQLLDR.EXE wont exit after sucessfully loading a table. My DOS window just hangs. Has anyone had this problem? Version 8.1.5 is the highest license we have. I was on 8.0.5 and it worked ok.

    Sorry to reply to my own post but this may help someone else.
    The problem is that the Solaris 10 Express install doesn't install the /kernel/misc/sparcv9/kbtrans module. I just copied it before I rebooted after the first CD install.
    (1) At the <Press Return to reboot the system> {"!" exits} prompt, enter "!"
    (2) The new root partition will be mounted as /a.
    (3) Copy the kbtrans file
    cp -p /kernel/misc/sparcv9/kbtrans /a/kernel/misc/sparcv9/kbtrans
    (4) Reboot
    This is just a workaround - Sun needs to fix the install.

  • Locked-up at "Uploading file to Adobe ExportPDF online...", even after closing, exiting, clearing browser cache, clearing all documents from online library.

    Locked-up at "Uploading file to Adobe ExportPDF online...", even after closing, exiting, clearing browser cache, clearing all documents from online library.  Ctrl-Alt-Del EndTask also had no effect.  Upon opening, searches for current status and then locks up...  Any help?

    Any advice would be helpful. Thanks

  • After I exit Firefox, I get a pop-up message that Firefox has stopped working.

    After I exit Firefox, I get a pop-up message that Firefox has stopped working. I have to click to close the program, or search online for a solution to the program, then close.

    See:
    * http://kb.mozillazine.org/Firefox_crashes
    * https://support.mozilla.com/kb/Firefox+crashes

  • Process in memory after System.exit(0)

    I still see the process in memory after I exit the app. Do you think it is a JWS side effect?
    Platform: W2K
    Cheers,
    Ivan

    Ivan,
    when you enable the 'java console' in Java Web Start->Preferences->Advanced->Show Java Console, you'll notice that you run into a java.security.accessControlException.
    To avoid that, sign your jar file(s) and add the following to your jnlp file :
    <security>
    <all-permissions>
    </security>
    and it will work as expected!
    Regards,
    Patrick

Maybe you are looking for