Why has drag and drop in mail stopped working

Drag and drop has only stopped working in Mail, it is still functioning in other programs.

Yes sir, but as you said, "Pity no one came up with a suggestion or two or a solution".
The matter isn't closed for others coming to this thread looking for an answer. Repairing permisions is much easier than a reinstall. It worked for me.

Similar Messages

  • Drag and drop in mail stopped working

    where is the menu command to reactivate it?
    the "move" command still works.

    Yes sir, but as you said, "Pity no one came up with a suggestion or two or a solution".
    The matter isn't closed for others coming to this thread looking for an answer. Repairing permisions is much easier than a reinstall. It worked for me.

  • Drag and Drop e-mails to a SharePoint Online Folder

    Summary
    E-mail to a list is not available in SharePoint Online (yet) and it is difficult to move e-mails from Outlook to a SharePoint list for collaboration, storage and search.  The following steps will put a file on the users desktop that will open a SharePoint list and then you can drag and drop e-mails into the proper folder. 
    Step 1
    Create a drag and drop folder location for SharePoint Online e-mails
    1.       Go to your SharePoint Online shared documents location
    2.       Create the folder structure that you want for your e-mail storage
    3.       Click on your top folder
    4.       Click on Actions
    5.       Open with Windows Explorer
    6.       In the address bar at the top of the Explorer Window copy the address
    Step 2
    Go to Start, Computer
    1.       Click on Map Network Drive
    2.       Paste the address copied above into the Folder box
    3.       Check Reconnect at logon
    4.       Take note of the drive letter given or choose a drive letter
    *note these instructions are for Windows 7 – you can search help for Map Network Drive for the OS you are using
    Step 3
    Open Notepad
    1.       Type in the following:
    “explorer z:”  (leave out the quotation marks and enter the drive letter in step 2
    2.       Click File
    3.       Click Save As
    4.       File name OpenEmail.bat
    ·         Note the file name does not matter but the .bat has to be there
    ·         Save to the Desktop
    When a user wants to open the SharePoint location that stores e-mail they double click on OpenEmail.bat and it will open in an Explorer view which will allow for e-mails to drag and drop from Outlook into the folder.
    David Allred

    For drag and drop of emails from Outlook to SharePoint we are using a third party
    SharePoint Outlook Integration tool called PageLight. PageLight also offers
    Save Outlook emails to SharePoint functionality

  • Why does drag and drop not work?

    Why does drag and drop not work?

    Do you mean that when you move files on the Desktop, they don't stay where you put them ?.
    If so - use Finder - View menu - Show View options & choose 'Arrange by' : none
    If not - please describe exactly what the problem is.

  • Does SAP ECL viewer has drag and drop functionality...

    Hi,
    Does ECL viewer has drag and drop functionality for example we can drag and drop file from windows sever to SAP. So that it can be used later on using BDN.
    Thanks.
    Regards,
    Rajesh.

    Implement this program,  it is a cut/paste solution.  Again, you must have the ECL component installed on your SAPgui.
    report zrich_0001 .
    parameters: p_check type c.
    start-of-selection.
    at selection-screen output.
      data: dockingleft   type ref to cl_gui_docking_container,
            dockingright  type ref to cl_gui_docking_container,
            ecl_viewer   type ref to cl_gui_ecl_2dviewer,
            html_viewer  type ref to cl_gui_html_viewer.
      data: repid type syrepid.
      data: url(2048) value 'c:'.
      repid = sy-repid.
      check dockingleft is initial.
      create object dockingleft
                  exporting repid     = repid
                            dynnr     = sy-dynnr
                            side      = dockingleft->dock_at_left
                            ratio     = 50
                            extension = 1000.
      create object html_viewer
           exporting
                parent    = dockingleft.
      call method html_viewer->show_url
           exporting
                url       = url.
      check dockingright is initial.
      create object dockingright
                  exporting repid     = repid
                            dynnr     = sy-dynnr
                            side      = dockingright->dock_at_right
                            ratio     = 50
                            extension = 1000.
      create object ecl_viewer
          exporting
             parent             = dockingright
          exceptions
             cntl_error         = 1
             cntl_system_error  = 2
             create_error       = 3
             lifetime_error     = 4
             others             = 5.
         call method ecl_viewer->create_toolbar
            exporting
                close_button      = ' '
                tools             = 'X'
                viewer            = 'X'
                navigation        = 'X'
                options           = 'X'
                viewer_openfile   = 'X'
                viewer_savefile   = 'X'
                tool_measurement  = 'X'
                remove_document   = ' '
            exceptions
                cntl_system_error = 1
                cntl_error        = 2
                cntb_btype_error  = 3
                dp_error          = 4 .
    Now drap a PDF file from the left container, and drop in the right side.  Slick, right?
    The ECL doesn't handle every file type,  but PDF works good.
    Regards,
    Rich Heilman

  • How to to drag and drop apple mail into a browser or a webpage?

    I want to drag and drop a mail from mailbox to a webpage for uploading.
    is it possible to do that?

    In the edit page mode, click the pencil of the region were your portlets are. A region is a box with a dotted line. In the first tab you have the ability to select "Allow action". Default this is set to "all". When you set it to "none", your portlets can not be drag & dropped.

  • Drag and Drop Feature is not working

    I have a mid 2012 MacBook Pro running 10.8.3 and all of a sudden the drag-and-drop feature isn't working. I was dragging photos from my job's website and adding them to a folder, but after about three photos in, it stopped working and no matter what I do it won't drop into the folder. How can I solve this?
    Thanks

    Can you drag anything into the folder, such as files from another folder?

  • Drag and drop feature is not working in Maverick?

    what can i do when the Drag and Drop feature is not working in my I Mac Using Maverick 10.9.4, it will not do it at all i must do copy and paste.
    reading from earlier forums this has been a problem in earlier versions for the mac.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Why has Microsoft RDC 2.1.1 stopped working on OS X 10.8.3?

    Why has Microsoft RDC 2.1.1 stopped working on OS X 10.8.3? This has only stopped working since the recent update from Apple, is this the cause? Thanks

    ... failing that you shold get it at:
    https://www.microsoft.com/mac/remote-desktop-client
    Regards,
    Shawn

  • Now that I have home share my drag and drop feature doesn't work to create playlists

    Now with Home Share there are two subsets of playlists.  One is on the hard drive of the acutual computer where the iTunes originated.  Once I am at a Home Share computer I cannot use the playlist feature.  I can CREATE a playlist and name it, but the drag and drop feature does not work for songs which are not directly located on this hard drive.  I can, for some reason, attach an iPod and make a list over on that, but that is all. 

    Because IE is running in a different user context. You cannot drag and drop anything from Explorer into a different user context. This isn't a "SharePoint" issue, as it relates to any application run as a different user.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Why is drag and drop not working in lion

    Drag and drop has not worked correctly once since I started using lion.

    Hi
    I had the same problem in my case the remedy was simple
    Preferences - Universal Access - Mouse and Trackpad tab - trackpad options
    tick the drag and drop box
    I dont know why this option had been turned off but ticking this box restored the drag and drop function
    HTH

  • Enable Drag and Drop from mail to inbox folder

    Using Outlook 2007... Somehow my drag and drop function has been disabled. I can no longer select an email and move it into a mail folder by dragging and dropping. I am able to right click and select "move to" but dragging and dropping is much
    more efficient with the volume of email I'm receiving. This happened to me years ago but the company's IT guy fixed it while I was out of the office. When asked he said I had typed a keyboard code unknowingly that disabled the function. Any ideas on how to
    regain the awesomeness that is drag and drop??

    Hi,
    Some users who encountered the same issue are able to resolve it by pressing ESC key for several times, you may have a try and let me know the result.
    If above doesn't make any change, we may try to right-click the email you want to move and drag it to the target folder, then select Move from the pop-up menu to see if it will work.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Drag and Drop prob (Mail)

    When I drag and drop text in a Mail message it drops a copy in the new location and leaves the original text in place. I guess there must be a setting somewhere to allow what I would call normal behavior (ie the text moves location when dragged, equivalent to cut and paste) but I can't find it. Anyone?
    (EDIT) - Couldn't find an answer to this when I searched the communities but when I posted the above, a link to a similar question (with an answer) appeared Re: Strange drag and drop text editing behavior in Mail, so thanks for reading this but no answer is now required)

    You might consider using the "Archive" capability of Mail.  Look at Archive in Mail Help.
    charlie

  • Drag and drop in mail

    i cant drag and drop mail into folders, the same thing happens in iphoto,
    help

    Yes sir, but as you said, "Pity no one came up with a suggestion or two or a solution".
    The matter isn't closed for others coming to this thread looking for an answer. Repairing permisions is much easier than a reinstall. It worked for me.

  • How do I enable text drag and drop in Mail?

    Simple enough question. I'm sure I had this at one time in my Mail app, but it doesn't work now, and I see nothing in Preferences to enable it. Can anyone tell me what I'm missing?
    Rob

    Just found the problem. The old Kensington Turbo Mouse I was using won't work with drag and drop. It doesn't work even when I dedicate one of the four buttons specifically to Drag. Attaching the regular mouse solves the issue.
    (Though not, interestingly, with the text in InDesign, the application I'm using throughout the day).
    Rob

Maybe you are looking for

  • Getting Error while Running Agentdownload Script

    Hi All I am Installing agent via agentdownload script using windows server on both side. But somehow I am getting error like this C:\>cscript.exe agentDownload.vbs -b c:\OEMAGENT -m wsi-woodstock.psi.nd.edu -r 4889 Microsoft (R) Windows Script Host V

  • My account is gone and no record of my purchasing adobe acrobat 9 a few years back

    I purchased adobe acrobat a few years back and am now having trouble with my program malfunctiong. I went to the adobe web site and My Acounts and it no longer exist. I set up a new account and tried to register my product but they wanted a serial #

  • How do I get rid of annoying popups even after the proper settings have been checked?

    Popup blocker is on but I still get annoying popups. When I use Google Chrome I do not get any popups. I tried for hours to get rid of these and also have asked questions with no answers.....I guess if you people cant help I'll have to resort to maki

  • Downloading Vidio

    Hi guys , i am in need of a little help. I am looking at getting myself a lovely ipod vidio but got 2 questions needing to be answered, also i am from the uk if this makes any difference lol... 1 Icant seem to find any tv shows to buy in the uk itune

  • [SOLVED] Libjack.so.0 ELFCLASS64 - wineasio etc

    Hey guys, long-time computer user, but haven't been using Linux that much! I'm trying to get wineasio working under Arch Linux x86_64. So far I've installed JACK, WINE (obviously) and Wineasio (seemingly). But when I'm trying to do a 'regsvr32 wineas