Why has facetime stopped recording calls unless I close it down and restart it?

Facetime has stopped recording calls unless I close it down and restart.  Any solutions?

Try the standard fixes to rule out a hardware problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

Similar Messages

  • Why has Facetime stopped working on my MacBook Air?

    FaceTime has stopped working on my MacBook Air.  Whenever I try to initiate or accept a call, the screen reads "Connecting" for a few seconds, and then reads "FaceTime Failed."  I called Tech Support and they were less than helpful.  They said that "perhaps" I need to check for software updates.  I did.  I downloaded an update for OS X.  I then restarted my computer.  Big surprise:  FaceTime still doesn't work.  Any ideas?
    I've also heard that certain iOS users are also having FaceTime trouble, but Apple has been keeping very hush-hush about the issue.  I'm ready to chuck this stupid piece of crap out of the nearest window and go back to using PCs.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
     Cheers, Tom

  • Why has facetime stopped working?

    I have been carrying on a facebook conversation with my son for almost three months and now it is not working on our Macbook Pros.  Occasionally when I start up Facetime it will give me an error message of "there is an error" and it will shut down.  When I right click the icon in the tray it does bring up Facetime.  What is going on?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
     Cheers, Tom

  • Installed Mavericks, now when put to sleep cannot open unless I totally shut down and restart.

    Installed mavericks on my Mac, have 10.9 snow lepard system. Notice now when put into sleep mode, cannot reopen unless I totally shut down

    If you're running OS X 10.8.5 or earlier, then from the menu bar, select
     ▹ System Preferences... ▹ Accessibility
    If the checkbox at the bottom marked
    Enable access for assistive devices
    is checked, uncheck it and test.
    If you're running OS X 10.9 or later, select
     ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
    If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.

  • Good day all, I am new to Mac. Just at a time when I am in the middle of something, my Mac will just prompt me to shut down and restart again. The computer will just freeze, and will not respond unless it is shut down and restarted. Is that how it works

    Good day all,
    I am new to Mac. Just want to find out if your Macs always prompt you to shut down and restart. Mine happens very often sometimes, and it can be very embarrassing, especially just when you think you are almost done with what you are doing, only for you start all over again. Or, is there anything I am doing wrong, somebody please help, Thanks.
    Francis.

    Hi Francis,
    Are you getting kernel panics?
    http://support.apple.com/kb/TS3742
    http://www.thexlab.com/faqs/kernelpanics.html

  • Why can't I record calls with the iPhone?

    Hi,
    Why can't I record calls with the iPhone? Every other mobile can! That's quite pitty ...!

    Nonsense. There are many places where you are not allowed to take photos or video but those functions are included. Apple assumes no responsibility for them. Apple would not be responsible for managing the recordings on the phone either. It's most likely because Apple is located in California and in THAT particular state, both parties have to be informed of the recording. Most states do not require that. If Apple were located in another state (e.g. Alaska) there would be no restriction.
    All the apps that record calls store those recordings in their servers and charge you a fee. It would be preferable to have the calls stored only on the phone so no one else could access them. The iPhone has the technological capability; we have just been restricted from having this functionality without paying a 3rd party.

  • Why has Siri stopped working on iPhone 4 after upgrading to IOS 5?

    Why has Siri stopped working on iPhone 4 after upgrading to IOS 5? I've tried the disable and reboot but continue to get the network error.

    Apple has not been forthcoming on the explanation. My Siri worked on my iphone4 (not 4s) immediately after upgrading to IOS5, but I take it they have redirected the servers that used to support Siri to only work with Iphone4s.
    It is one thing for apple to only bundle the improved Siri with IPhone 4S, or  for them to remove Siri from the Ap store.
    But it is another thing all together for apple to purchase a company, and then cease the service that many of us paid for.
    Attempts to contact apple at apple store and via email have been unhelpful.
    Apple Fan--

  • TS1424 HELLO! whenever i try to access the itunes store from the itunes on my laptop i get this message: ITUNES HAS STOPPED WORKING a problem caused the program to stop working correctly. windows will close the program and notify if a solution is availabl

    for a few weeks i have not been able to access the itunes store from the itunes on my laptop. every time i click on it it tells me it cannot access the store...not sure why. and says this: ITUNES HAS STOPPED WORKING a problem caused the program to stop working correctly. windows will close the program and notify if a solution is available.

    I had this exact same problem.  I found this fix and it worked for me. 
    Step 1:
    Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll. 
    Step 2:
    Browse and past that file into C:\Program Files (x86)\iTunes.
    Hope this helps you.  I wish I could remember where I saw this originally so I could thank them.
    Good Luck.
    Anthony

  • I can't open Itunes on my laptop. "Itunes has stopped working. A problem causes the program to stop working correctly. windows will close the program and notify you if a solution is available" is the message. what is the problem here?

    I can't open my Itunes program in my laptop computer with windows 8. the message is "Itunes has stopped working. A problem causess the program to stop working properly. windows will close the program and notify you if a solution is available". I reboot  the machine, Uninstall and re install the  Itune program, stilll the same message pops up.

    The first thing to try is System Restore to take you back to a point in time when it did work. If that is not successful, create a new user on the computer. log in with that and see if ID will start. This will tell us if the problem is in the system/program or the user account.
    If it works in a new user account, see Replace Your Preferences and in addition to replacing the prefs, empty the InDesign Recovery folder that will be in the same location and the InDesign SavedData file.

  • After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014.  It states "Adobe Premiere Pro 2014.2 has stopped working.  A problem has caused it to stop working.  Windows will close the program and notify you of

    After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014.  It states "Adobe Premiere Pro 2014.2 has stopped working.  A problem has caused it to stop working.  Windows will close the program and notify you of a solution."  When I used the trial I never received this message.  Now after purchasing it I receive this error each time I open PP and am unable to use. it.  Any ideas or support to fix this issue?

    What does the detailed crash report say?
    And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers)

  • TS1424 I'm getting a message that indicates "Itunes has stopped working.  A problem caused the program to stop working. Windows will close the program and will notify you if a solution is available.  But I never get a response.  Can somebody help?

    When opening Itunes, after placing my ID and password, I'm getting a message that indicates "Itunes has stopped working.  A problem caused the program to stop working. Windows will close the program and will notify you if a solution is available.  But I never get a response.  Can somebody help?

    Same exact thing with me.  And no help from apple.  Just dropped nearly $600 and cannot get a decent working setup.
    Apple's only suggestion was to uninstall iTunes and Quicktime, and re-install... of course (the I.T. Crowd tactic).
    The crash happens only on iTunes store access.

  • IPhoto 5.0.4 has suddenly stopped working. It loads the photo library and then freezes. Rebuilding the library has no effect which has about 3.5MB of data. PowerBook G4 OS 10.5.8

    iPhoto 5.0.4 has suddenly stopped working. It loads the photo library and then freezes. Rebuilding the library has no effect which has about 3.5MB of data. PowerBook G4 OS 10.5.8

    Create a new account (systempreferences -> accounts or Users & Groups on 10.7)  and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
    Regards
    TD

  • I accepted a version update and now iTunes closes on launch with the message "iTunes has stopped working. Windows will close the program and notify you if a solution is available." What to do?

    I accepted a version update and now iTunes closes on launch with the message "iTunes has stopped working. Windows will close the program and notify you if a solution is available." What to do?

    Hey Todd Rubenson,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows unexpectedly quitting. The following resource may provide a solution:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Thanks,
    Matt M.

  • Why has Apple decided that online orders for Macbook Air display and speak VO when first opened from the box? I"m guessing 1%or 2 % of your customers know what it is or want it.

    Why has Apple decided that online orders for Macbook Air display and speak VO when first opened from the box? I"m guessing 1%or 2 % of your customers know what it is or want it.

    You are not talking to Apple, we are just users like you.  Only Apple knows that answer.

  • TS3999 why has my calendar become "faded" since going to "the cloud" and how do I make it readable?

    why has my calendar become "faded" since going to "the cloud" and how do I make it readable?

    You can't use iCloud to back up your photos.  Photo stream only keeps photos for 30 days, and your iCloud backup would be overwritten by a new backup that doesn't contain your photos if your were to delete them from your phone and keep backing up.
    If you want to get them off your phone, import them to your computer and delete them as explained here: http://support.apple.com/kb/HT4083.

Maybe you are looking for

  • CFGRID, was working in CF8 won't display results in CF11

    Hi I recently upgraded a client from CF 8 to CF 11. In the code is a CFGRID which was working in CF8 but now in CF11 the grid displays but no data appears (the grid is simply empty). With debugging enabled the Coldfusion Ajax Logger is reporting the

  • Quantity for service type invoice

    hello i am trying to create a service type purchase order. i have created row level udfs for unit price and quantity. price should be multiplied by unit price and the total should be displayed as the total for the invoice. how can i do this? secondly

  • Date and time on my iPhone keeps changing to GMT or Cupertino time

    Hi, Somehow my date and time settings keeps changing to GMT/Cupertino despite setting it to Mumbai (India). Because of this all my alarms and calendar events have gone for a toss. I have changed the time to Mumbai multiple times, but it keeps switchi

  • Business object 3.1 authorization

    Dear all, Please send me the link of document for  BO authorization (CMC level) ,

  • Remove 0's right of number

    hi all, can u plx to suggest me one function to remove the rights 0's after comma? I do it with offset, but I need a function: here my code: obs: I'm doing it to study... DATA: num(50) VALUE '1101010.100110000000000000',       num2(50),       cont(2)